Hexa-Fe(III) Carboxylate Complexes Facilitate Aerobic Hydrocarbon Oxidative Functionalization: Rh Catalyzed Oxidative Coupling of Benzene and Ethylene to Form Styrene
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “functional oxides”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ionic Liquid-Mediated Scanning Probe Electro-Oxidative Lithography as a Novel Tool for Engineering Functional Oxide Micro- and Nano-Architectures
Functional oxides have extensively been investigated as a promising class of materials in a broad range of innovative applications. Harnessing the novel properties of functional oxides in micro- to nano-scale applications hinges on establishing advanced fabrication and manufacturing techniques able to synthesize these materials in an accurate and reliable manner. Oxidative scanning probe lithography (o-SPL), an atomic force microscopy (AFM) technique based on anodic oxidation at the water meniscus formed at the tip/substrate contact, not only combines the advantages of both “top-down” and “bottom-up” fabrication approaches, but also offers the possibility of fabricating oxide nanomaterials with high patterning accuracy. While the use of self-assembled monolayers (SAMs) broadened the application of o-SPL, significant challenges have emerged owing to the relatively limited number of SAM/solid surface combinations that can be employed for o-SPL, which constrains the ability to control the chemistry and structure of oxides formed by o-SPL. Here, in this work, a new o-SPL technique that utilizes room-temperature ionic liquids (RTILs) as the functionalizing material to mediate the electrochemistry at AFM tip/substrate contacts is reported. The results show that the new IL-mediated o-SPL (IL-o-SPL) approach allows sub-100 nm oxide features to be patterned on a model solid surface, namely steel, with an initiation voltage as low as -2 V. Moreover, this approach enables high tunability of both the chemical state and morphology of the patterned iron oxide structures. Owing to the high chemical compatibility of ILs, which derives from the possibility of synthesizing ILs able to adsorb on a wide variety of solid surfaces, IL-o-SPL can be extended to other material surfaces and provide the opportunity to accurately tailor the chemistry, morphology, and electronic properties within nanoscale domains, thus opening new pathways to the development of novel micro- and nano-architectures for advanced integrated devices.
36 MATERIALS SCIENCE↗
Computational and experimental evidence for Sb( v ) metal mediated C–H activation and oxidative functionalization of arenes
Quantum-chemical calculations and experiments demonstrated that inorganic Sb V complexes can directly activate aromatic sp 2 C–H bonds and induce oxidative functionalization to form aryl esters.
Koppaka, Anjaneyulu [Department of Chemistry and B↗
Obtaining bulk-like correlated oxide surfaces with protective caps
Functional oxides exhibit a diverse range of correlated electron phenomena, some of which are highly attractive for novel electronic, magnetic, and optical devices. Despite decades of advancement of our fundamental understanding of these materials, they consistently fall short of realizing their promise in functional devices. We identify a significant bottleneck toward device realization to be surface overoxidation. Protective caps can effectively prevent overoxidation, but their interfaces with functional oxides are not well understood. These interfaces are critical for effectively using functional oxides in field-effect devices, where “the interface is the device.” This work addresses the chemistry and physics of the interface between protective caps and the correlated metal SrVO3, a model functional oxide. Our comparison of five different cap materials reveals effective protection and similar SrVO3 surface chemistry in all cases. Systematic comparisons of surface and bulk-sensitive photoelectron spectra reveal that negligible interface redox takes place, elucidating the cap-SrVO3 interface chemistry. This work demonstrates a robust and simple solution to the surface overoxidation problem in vanadates, paving the way toward effectively using these materials in field-effect devices. Our conclusions are general and can be applied to numerous other systems, thus moving oxide electronics closer to the realization of functional devices.
Cohen, Amit (ORCID:0009000276477510)↗
Low‐Loss Far‐Infrared Surface Phonon Polaritons in Suspended SrTiO 3 Nanomembranes
Phonon polaritons (PhPs), excitations arising from the coupling of light with lattice vibrations, enable light confinement and local field enhancement, which is essential for various photonic and thermal applications. To date, PhPs with high confinement and low loss are mainly observed in the mid-infrared regime and mostly in manually exfoliated flakes of van der Waals (vdW) materials. In this work, the existence of low-loss, thickness-tunable phonon polaritons in the far-infrared regime within transferable freestanding SrTiO 3 membranes synthesized through a scalable approach, achieving high figures of merit is demonstrated, which are comparable to the previous record values from the vdW materials. Leveraging atomic precision in thickness control, large dimensions, and compatibility with mature oxide electronics, functional oxide membranes present a promising large-scale 2D platform alternative to vdW materials for on-chip polaritonic technologies in the infrared regime.
functional oxide membranes↗
Markers of mitochondrial function and oxidative metabolism in skeletal muscle do not display intrinsic circadian regulation in female mice
Mitochondria are key regulators of metabolism and ATP supply in skeletal muscle, while circadian rhythms influence many physiological processes. However, whether mitochondrial function is intrinsically regulated in a circadian manner in mouse skeletal muscle is inadequately understood. Accordingly, we measured postabsorptive transcript abundance of markers of mitochondrial autophagy, dynamics, and metabolism [extensor digitorum longus (EDL), soleus, gastrocnemius], protein abundance of electron transport chain complexes (EDL and soleus), enzymatic activity of succinate dehydrogenase (tibialis anterior and plantaris), and maximal mitochondrial respiration (tibialis anterior) in different skeletal muscles from female C57BL/6NJ mice at four zeitgeber times: 1, 7, 13, and 19. Our findings demonstrate that markers of mitochondrial function and oxidative metabolism do not display intrinsic time-of-day regulation at the gene, protein, enzymatic, or functional level. The core-clock genes Bmal1 and Dbp exhibited intrinsic circadian rhythmicity in skeletal muscle (i.e., EDL, soleus, gastrocnemius) and circadian amplitude varied by muscle type. These findings demonstrate that female mouse skeletal muscle does not display circadian regulation of markers of mitochondrial function or oxidative metabolism over 24 h.
Circadian Biology↗
From oxide epitaxy to freestanding membranes: Opportunities and challenges
Motivated by the growing demand to integrate functional oxides with dissimilar materials, numerous studies have been undertaken to detach a functional oxide film from its original substrate, effectively forming a membrane, which can then be affixed to the desired host material. This review article is centered on the synthesis of functional oxide membranes, encompassing various approaches to their synthesis, exfoliation, and transfer techniques. First, we explore the characteristics of thin-film growth techniques with emphasis on molecular beam epitaxy. We then examine the fundamental principles and pivotal factors underlying three key approaches of creating membranes: (i) chemical lift-off, (ii) the two-dimensional layer–assisted lift-off, and (iii) spalling. We review the methods of exfoliation and transfer for each approach. Last, we provide an outlook into the future of oxide membranes, highlighting their applications and emerging properties.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation
The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.
Adsorbent↗
Modified Cu–Zn–Al mixed oxide dual function materials enable reactive carbon capture to methanol
A novel RCC process using modified CZA DFMs to produce renewable MeOH is presented. K/CZA provides exceptionally high productivity of MeOH compared to previously reported attempts of RCC to MeOH.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Metallic phase–free Zn-Al mixed oxide dual function materials enable high CO selectivity in reactive carbon capture from dilute CO2 streams
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Metallic Phase-Free Zn-Al Mixed Oxide Dual Function Materials Enable High Co Selectivity in Reactive Carbon Capture From Dilute Streams
Scaling conventional carbon capture and utilization methods can be limited by cost and permitting issues associated with transportation of captured CO2. Reactive carbon capture (RCC), in which a single solid-phase dual function material (DFM) is used to both capture CO2 from dilute streams (e.g., flue gas) and catalytically convert the bound species to products in a single unit operation, has the potential to reduce energy and capital costs by over 50% relative to separate capture and conversion. To incentivize adoption, high-value products such as methanol and CO should be targeted. Appealingly, CO can be produced at atmospheric pressure, thereby lowering overall H2 demand; however, high reaction temperatures (> 600 degrees C) and the use of oxidizable transition metals, such as Ni, are often necessary to drive the reverse water-gas shift (RWGS) during reactive desorption of the bound CO2. The sensitivity of these transition metals to oxygen undercuts their utility in point source RCC. To further derisk RCC, it is essential to develop metallic-phase free DFMs that are insensitive to residual oxygen in flue gas and can achieve selective reactive desorption to CO at moderate pressures (< 400 degrees C). To this end, we have developed K-modified Zn-Al mixed oxides (K/ZnAlOx) to convert captured CO2 to CO with > 97% selectivity and yields up to 53% of captured CO2 at 400 degrees C. Complementary in situ spectroscopy studies revealed the role of K-modification in improving RCC performance of unmodified ZnAlOx. The top performing DFM was also subjected to extended RCC cycling with oxygen co-fed with CO2 during the capture test to assess durability under simulated flue gas.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Thermodynamic controls on the synthesis, structure and reactivity of materials for energy (Final Report)
The major objectives of this renewal proposal, now entitled “Thermodynamic Controls on the Synthesis, Structure and Reactivity of Materials for Energy,” are: (a) to advance and use unique calorimetric capabilities to determine the energetics of materials relevant to energy applications, with an emphasis on new materials, (b) to understand, in terms of both macroscopic energetics and microscopic structure and bonding, the interplay of defect chemistry, oxidation-reduction and size effects at the nanoscale in determining the properties of functional oxide materials and of new classes of non-oxide materials. Recent developments have generated great excitement in organic-inorganic hybrid materials such as the alkylammonium lead halide perovskites. Our current work has emphasized fluorite-based solid electrolytes, perovskites and lithium battery materials. The systematic trends seen enable a more holistic view of the relation of thermodynamics to materials discovery and synthesis. The proposed work more explicitly targets thermodynamic controls on metastability, energy landscapes, surface and nanoscale effects, and pathways of synthesis and decomposition. This project is leveraged by many U.S. and international collaborations that both extend the science and provide opportunities for work in a diverse global setting.
36 MATERIALS SCIENCE↗
Tuning Exciton Emission via Ferroelectric Polarization at a Heterogeneous Interface between a Monolayer Transition Metal Dichalcogenide and a Perovskite Oxide Membrane
Here we demonstrate the integration of a thin BaTiO 3 (BTO) membrane with monolayer MoSe 2 in a dual gate device that enables in-situ manipulation of the BTO ferroelectric polarization with a voltage pulse. While two-dimensional (2D) transition metal dichalcogenides (TMDs) offer remarkable adaptability, their hybrid integration with other families of functional materials beyond the realm of 2D materials has been challenging. Released functional oxide membranes offer a solution for 2D/3D integration via stacking. 2D TMD excitons can serve as a local probe of the ferroelectric polarization in BTO at a heterogeneous interface. Using photoluminescence (PL) of MoSe 2 excitons to optically readout the doping level, we find that the relative population of charge carriers in MoSe 2 depends sensitively on the ferroelectric polarization. This finding points to a promising avenue for future-generations versatile sensing devices with high sensitivity, fast read-out, and diverse applicability for advanced signal processing.
42 ENGINEERING↗
Sustainable upcycling of polyethylene waste to compatibilizers and valuable chemicals
Controllable functionalization of polyethylene (PE) waste could generate new polymeric materials that are generally difficult to manufacture sustainably while also addressing the growing plastics waste problem. However, these modifications remain challenging due to the inherent stability of the PE backbone. Non-thermal atmospheric plasma enables molecular activation under mild conditions while utilizing renewable energy but is primarily employed for surface modification, as plasmas do not penetrate the bulk of materials. Herein, controllable bulk oxidative functionalization of PE wax (PEW) and low-density PE (LDPE) of varying molecular weights was achieved, with up to 6 mol% oxygen incorporation, by manipulating melt viscosity. This functionalization was accomplished either through temperature adjustment or by introducing a melt viscosity modifier, removable via simple extraction methods, to reduce LDPE viscosity, enhance diffusion and chain mobility, and enable bulk oxidation. The oxidized LDPE induces compatibilization in blends of poly(lactic acid) (PLA) and LDPE with improved interfacial adhesion and mechanical properties, such as a 70% increase in elongation-at-break values vs. the control. These findings pave the way for catalyst-free upcycling of direct plastics waste and plastics waste-derived products, enabling the creation of high-value products across various markets.
Plastic upcycling↗
Magnetic La 0.7 Sr 0.3 MnO 3 Membranes Synthesized by Etching a Sr 3 Al 2 O 6 Sacrificial Layer Using an Intermediary Manganite Protection Layer
The integration of perovskite oxides onto flexible substrates has witnessed significant advancements owing to the development of an epitaxial lift-off technique utilizing a Sr 3 Al 2 O 6 sacrificial layer. However, Sr 3 Al 2 O 6 is susceptible to instability in both air and high-temperature oxygen atmospheres, potentially leading to degradation during the growth of the functional oxide layer. In this study, we investigate the use of an oxygen-deficient La 0.7 Sr 0.3 MnO 3 as capping layer, and demonstrate its ability to stabilize Sr 3 Al 2 O 6 films in ambient air. We successfully synthesized freestanding La 0.7 Sr 0.3 MnO 3 membranes by etching this sacrificial layer and transferring them onto flexible polymer substrates. Importantly, the magnetic properties of the La 0.7 Sr 0.3 MnO 3 films are preserved in these membranes. Furthermore, our results underline that employing a thin manganite capping layer ensures both high structural quality and the preservation of functional properties in the resulting membranes.
Deposition↗
Local p‐ and n‐Type Doping of an Oxide Semiconductor via Electric‐Field‐Driven Defect Migration
Layered oxides exhibit high ionic mobility and chemical flexibility, attracting interest as cathode materials for lithium-ion batteries and the pairing of hydrogen production and carbon capture. Recently, layered oxides emerged as highly tunable semiconductors. For example, by introducing anti-Frenkel defects, the electronic hopping conductance in hexagonal manganites is increased locally by orders of magnitude. Here, local acceptor and donor doping in Er(Mn,Ti)O3 is demonstrated, facilitated by the controlled splitting of anti-Frenkel defects under applied d.c. voltage. By combining density functional theory calculations, scanning probe microscopy, atom probe tomography, and scanning transmission electron microscopy, it is shown that the oxygen defects can readily be moved through the layered crystal structure, leading to nano-sized interstitial-rich (p-type) and vacancy-rich (n-type) regions. The resulting pattern is comparable to dipolar npn-junctions and stable on the timescale of days. These findings reveal the possibility of temporarily functionalizing oxide semiconductors at the nanoscale, giving additional opportunities for the field of oxide electronics and the development of transient electronics in general.
He, Jiali↗
Deep and Shallow Gap States in Reduced and n-Type Doped m -ZrO 2
Monoclinic zirconium dioxide (m-ZrO 2 ) is a wide-band-gap functional oxide with many applications. Understanding the role of intrinsic defects and dopants is important for improving the properties of m-ZrO 2 relevant to its applications. In this work, we characterize the electronic states and energy levels of oxygen vacancies (VO’s) and n-type Nb, Ta, Rb, H, and F dopants in the bulk and at the majority (1̅11) surface of m-ZrO 2 , using accurate dielectric-dependent hybrid functional calculations. Our results show that VO’s generally behave as deep donors with the excess electrons localized at the vacant O sites in the form of F centers, in agreement with previous studies. In contrast, surface VO’s at two-fold coordinated oxygen sites show a rather shallow (1+/0) transition level. Shallow levels are also obtained for adsorbed hydrogen (H ads ) and fluorine substituting an oxygen atom (FO) either in the bulk or at the surface, whereas Nb and Ta form deep levels. Altogether, our results suggest that FO is the best candidate for realizing n-type conductivity in bulk m-ZrO 2 , while surface VO’s and Hads provide an efficient way to control the surface chemistry of m-ZrO 2 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Chemical and Physical Drivers for Improvement in Permeance and Stability of Linker-Free Graphene Oxide Membranes
Graphene oxide (GO) is a promising membrane material for chemical separations, including water treatment. However, GO has often required postsynthesis chemical modifications, such as linkers or intercalants, to improve either the permeability, performance, or mechanical integrity of GO membranes. In this work, we explore two different feedstocks of GO to investigate chemical and physical differences, where we observe up to a 100× discrepancy in the permeability–mass loading trade-off while maintaining nanofiltration capacity. GO membranes also show structural stability and chemical resilience to harsh pH conditions and bleach treatment. Here we probe GO and the resulting assembled membranes through a variety of characterization approaches, including a novel scanning-transmission-electron-microscopy-based visualization approach, to connect differences in sheet stacking and oxide functional groups to significant improvements in permeability and chemical stability.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗