Search NASA⌕ Search

SEARCH · Search NASA

Results for “fundamental parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Atmospheric and Fundamental Parameters of Stars in Hubble's Next Generation Spectral Library

Hubble's Next Generation Spectral Library (NGSL) consists of R approximately 1000 spectra of 374 stars of assorted temperature, gravity, and metallicity. We are presently working to determine the atmospheric and fundamental parameters of the stars from the NGSL spectra themselves via full-spectrum fitting of model spectra to the observed (extinction-corrected) spectrum over the full wavelength range, 0.2-1.0 micron. We use two grids of model spectra for this purpose: the very low-resolution spectral grid from Castelli-Kurucz (2004), and the grid from MARCS (2008). Both the observed spectrum and the MARCS spectra are first degraded in resolution to match the very low resolution of the Castelli-Kurucz models, so that our fitting technique is the same for both model grids. We will present our preliminary results with a comparison with those from the Sloan/Segue Stellar Parameter Pipeline, ELODIE, and MILES, etc.

Heap, Sally↗
NASA NTRS1991

Fundamental parameters of brightest cluster galaxies

Photometry and spectroscopy of a sample of the brightest cluster galaxies (BCGs) are presented, and the relationships between scale length, surface brightness, velocity dispersion, and line strength are determined and compared with the relations determined for lower luminosity ellipticals (LLEs). It is found that the relation between log r(e), log sigma, and mean surface brightness reported by Dressler et al. for LLEs also describes the relation for BCGs fairly well. Fundamental plane solutions for BCGs are derived which can be used as distance indicators with a predicted error of about 21 percent per galaxy. Only a weak correlation is found between the Na D 5893 line strength and velocity dispersion for BCGs, in contrast to the significant correlation between these quantities reported for LLEs. It is found that the mean mass-to-light ratio for BCGs is a factor of about two greater than for the LLEs in the Virgo and Coma sample of Dressler et al.

Oegerle, William R.↗
NASA NTRS1993

The fundamental parameters of the chromospherically active K2 dwarf Epsilon Eridani

A silicon array detector was used to record regions exhibiting calcium and iron lines in the spectrum of the chromospherically active K2 dwarf Epsilon Eri at a resolution of 120,000 and with an SNR of not less than 200. The effective temperature, surface gravity, logarithmic iron and calcium abundances, and microturbulence are determined. Three high-excitation lines of Fe I were found to yield anomalously low iron abundances; it is postulated that the origin of the anomaly lies in the nonthermal excitation of the upper photosphere caused by chromospheric emission. It is shown that Epsilon Eri is in an evolutionary stage consistent with an M/solar mass of 0.85 theoretical zero-age main-sequence model. It is suggested that Epsilon Eri is almost certainly a young star of slightly less than one solar mass.

Drake, Jeremy J.↗
NASA NTRS1994

The metallicity of M4: Accurate spectroscopic fundamental parameters for four giants

High-quality spectra, covering the wavelength range 5480 to 7080 A, have been obtained for four giant stars in the intermediate-metallicity CN-bimodal globular cluster M4 (NGC 6121). We have employed a model atmosphere analysis that is entirely independent from cluster parameters, such as distance, age, and reddening, in order to derive accurate values for the stellar parameters effective temperature, surface gravity, and microturbulence, and for the abundance of iron relative to the Sun, (Fe/H), and of calcium, Ca/H, for each of the four stars. Detailed radiative transfer and statistical equilibrium calculations carried out for iron and calcium suggest that departures from local thermodynamic equilibrium are not significant for the purposes of our analysis. The spectroscopically derived effective temperatures for our program stars are hotter by about 200 K than existing photometric calibrations suggest. We conclude that this is due partly to the uncertain reddening of M4 and to the existing photometric temperature calibration for red giants being too cool by about 100 K. Comparison of our spectroscopic and existing photometric temperatures supports the prognosis of a significant east-west gradient in the reddening across M4. Our derived iron abundances are slightly higher than previous high-resolution studies suggested; the differences are most probably due to the different temperature scale and choice of microturbulent velocities adopted by earlier workers. The resulting value for the metallicity of M4 is (Fe/H )(sub M4) = -1.05 + or - 0.15. Based on this result, we suggest that metallicities derived in previous high-dispersion globular cluster abundance analyses could be too low by 0.2 to 0.3 dex. Our calcium abundances suggest an enhancement of calcium, an alpha element, over iron, relative to the Sun, in M4 of (Ca/H) = 0.23.

Drake, J. J.↗
NASA NTRS2017

The Fundamental Stellar Parameters of FGK Stars in the SEEDS Survey Norman, OK 73071, USA

Large exoplanet surveys have successfully detected thousands of exoplanets to-date. Utilizing these detections and non-detections to constrain our understanding of the formation and evolution of planetary systems also requires a detailed understanding of the basic properties of their host stars. We have determined the basic stellar properties of F, K and G stars in the Strategic Exploration of Exoplanets and Disks with Subaru (SEEDS) survey from Echelle spectra taken at the Apache Point Observatory's 3.5m telescope. Using ROBOSPECT to extract line equivalent widths and Temperature Gravity microtrubulent Velocity ITerations to calculate the fundamental parameters, we have computed T(sub eff), log(g), v(sub t), [Fe/H], chromospheric activity and the age for our sample. Our methodology was calibrated against previously published results for a portion of our sample. The distribution of [Fe/H] in our sample is consistent with that typical of the Solar neighbourhood. Additionally, we find the ages of most of our sample are less than 500 Myr, but note that we cannot determine robust ages from significantly older stars via chromospheric activity age indicators. The future meta-analysis of the frequency of wide stellar and sub-stellar companions imaged via the SEEDS survey will utilize our results to constrain the occurrence of detected comoving companions with the properties of their host stars.

Strategic Exploration of Exoplanets and Disks with↗
NASA NTRS1972

Relation of the diffuse reflectance remission function to the fundamental optical parameters.

The Kubelka-Munk equations describing the diffuse reflectance of a powdered sample were compared to equations obtained using a uniformly-sized rough-surfaced spherical particle model. The comparison resulted in equations relating the remission function and the Kubelka-Munk constants to the index of refraction, the absorption coefficient, and the average particle diameter of a powdered sample. Published experimental results were used to test the equation relating to the remission function to the fundamental optical parameters.

Simmons, E. L.↗
NASA NTRS1991

Nondimensional parameters and equations for buckling of symmetrically laminated thin elastic shallow shells

A method of deriving nondimensional equations and identifying the fundamental parameters associated with bifurcation buckling of anisotropic shells subjected to combined loads is presented. The procedure and rationale used to obtain useful nondimensional forms of the transverse equilibrium and compatibility equations for buckling are presented. Fundamental parameters are identified that represent the importance of both membrane and bending orthotropy and anisotropy on the results.

Nemeth, Michael P.↗
NASA NTRS1992

Measurements of the fundamental thermodynamic parameters of Li/BCX and Li/SOCl2 cells

Two experimental techniques - equilibrium or reversible cell discharge and measurement of open circuit potential as a function of temperature - are used to determine the thermodynamic data needed to estimate the heat generation characteristics of Li/BCX and Li/SOCl2 cells. The results obtained showed that the reversible cell potential, the temperature dependence of the reversible cell potential, and the thermoneutral potential of the BCX cell were 3.74 V, -0.857 +/- 0.198 mV/K, and 3.994 +/- 0.0603 V, respectively. The respective values obtained for the Li/SOCl2 cell were 3.67 V, -0.776 +/- 0.255 mV/K, and 3.893 +/- 0.0776 V. The difference between the thermoneutral potential of Li/BCX and Li/SCl2 cells is attributable to the difference in their electroactive components.

Kalu, E. E.↗
NASA NTRS2005

Fundamental Mvssbauer Parameters of Hydrous Iron Sulfates

Hydrous iron sulfates, which form as alteration products of sulfides, are rare on Earth. On Mars, the low temperature and pH found in the martian permafrost create ideal conditions for the formation of this group of minerals [1], which includes such phases as coquimbite (Fe2(SO4) 9H2O) and amarantite (FeSO4(OH) 3H2O). Viking, Mars Pathfinder, MER and OMEGA data [e.g., [2]] have all indicated the presence of high sulfur contents on the surface of Mars, but the mineralogy of the sulfur-rich phases has not been well constrained. Recent work by [3] suggests that hydrous iron sulfates might satisfy the Martian thermal emission, vis-near IR, and M ssbauer spectra. These data suggest that sulfide and sulfate minerals might be significant contributors to all types of spectra acquired on the Martian surface.

Rothstein, Y.↗
NASA NTRS2009

TRW - Lunar Descent Engine

As we went through the program, what we determined, and what we all agreed on, was that the thrust coefficient (Cf) of the nozzle, after you get past a certain point, is really an engineering parameter. It s not a fundamental parameter that is going to be highly variable. Once we knew what the contour of the nozzle was, and once we knew what its characteristic was out to 2:1, we could calculate what the 48:1 thrust coefficient was going to be. In every case that we made a test, the calculation was precise. We weren't looking for a problem out at 48:1. Once we crushed the nozzle and said, "Yeah, we can land on the boulder," and once we had the thermal profile of that columbium nozzle, we did not require a lot of effort there. The real characterization was done in throttling over the 10:1 with the injector and controlling the mixture ratio on that - the whole head-end assembly - out to 2:1. I think everybody at NASA and Grumman agreed that flying like you test is great, particularly if you are using an aircraft engine. But, in this case, the thrust coefficient of the nozzle was not an issue. We had the tandem configuration of the service module, the command module, and the LEM sitting out there, and we were to fire the LEM. On Apollo 5, we were firing the LEM to show how it would work. There was a problem. I can t remember where the problem was, but something caused a problem before that engine had finished its burn. It was not in the engine, but there was some other problem, and NASA made a controlled shutdown. Then, they came to us and asked, "Hey, we re up there. We want to finish this test program. Is it okay if we restart that engine again in space with this tandem configuration?" We said, "As long as it has been more than forty minutes since you shut down, our analysis says that you will be okay in terms of the thermal characteristics of the inside of that chamber." They restarted it and pushed that system around in orbit on Apollo 5. It turned out, that when it came to Apollo 13, we went back into the record, and said, "Hey, we have pushed this system around up there on Apollo 5, and we have also restarted this tandem configuration." The requirements on Apollo 13 were to put it back into play. The spacecraft was out of free return to the earth at the time of the accident. It would not have come back. NASA said, "Okay, we ll use the descent engine to put the spacecraft in a free trajectory; it will go around the moon and be on free trajectory back to Earth." Then, as it came around the far side of the moon, the guys found out that they had an oxygen problem. As you remember, things were getting pretty bad in there. They said, "We ve got to get it back as fast as we can. Is it okay if we re-fire the engine? Now, we re in a free trajectory, so we want to put as much delta-v (or change in velocity) in as we can. Can we re-fire right now?" We said, "Yes, the data says it has been this period of time." We could re-fire the engine, run the rest of the duty cycle up as far as we needed while preserving enough fluids to make the final correction as the spacecraft got near Earth, and restart the engine. It was pretty fortuitous that we could give them those answers.

Elverum, Gerard W.↗
NASA NTRS2018

The Path Towards High-Contrast Imaging with the VLTI: The Hi-5 Project

The development of high-contrast capabilities has long been recognized as one of the top priorities for the VLTI (Very Large Telescope Interferometer). As of today, the VLTI routinely achieves contrasts of a few 103 in the near-infrared with PIONIER (Precision Integrated-Optics Near-infrared Imaging ExpeRiment) (H band) and GRAVITY (K band). Nulling interferometers in the northern hemisphere and non-redundant aperture masking experiments have, however, demonstrated that contrasts of at least a few 10 (sup -3) are within reach using specific beam combination and data acquisition techniques. In this paper, we explore the possibility to reach similar or higher contrasts on the VLTI. After reviewing the state-of-the-art in high-contrast infrared interferometry, we discuss key features that made the success of other high-contrast interferometric instruments (e.g., integrated optics, nulling, closure phase, and statistical data reduction) and address possible avenues to improve the contrast of the VLTI by at least one order of magnitude. In particular, we discuss the possibility to use integrated optics, proven in the near-infrared, in the thermal near-infrared (L and M bands, 3-5 microns), a sweet spot to image and characterize young extra-solar planetary systems. Finally, we address the science cases of a high-contrast VLTI imaging instrument and focus particularly on exoplanet science (young exoplanets, planet formation, and exozodiacal disks), stellar physics (fundamental parameters and multiplicity), and extragalactic astrophysics (active galactic nuclei and fundamental constants). Synergies and scientific preparation for other potential future instruments such as the Planet Formation Imager are also briefly discussed. This project is called Hi-5 for High-contrast Interferometry up to 5 microns.

PIONIER (H band)↗
NASA NTRS2018

Hi-5: A Potential High-Contrast Thermal Near-Infrared Imager for the VLTI

Hi-5 is a high-contrast (or high dynamic range) infrared imager project for the VLTI. Its main goal is to characterize young extra-solar planetary systems and exozodiacal dust around southern main-sequence stars. In this paper, we present an update of the project and key technology pathways to improve the contrast achieved by the VLTI. In particular, we discuss the possibility to use integrated optics, proven in the near-infrared, in the thermal near-infrared (L and M bands, 3-5 μm) and advanced fringe tracking strategies. We also address the strong exoplanet science case (young exoplanets, planet formation, and exozodiacal disks) offered by this wavelength regime as well as other possible science cases such as stellar physics (fundamental parameters and multiplicity) and extragalactic astrophysics (active galactic nuclei and fundamental constants). Synergies and scientific preparation for other potential future instruments such as the Planet Formation Imager are also briefly discussed.

exozodiacal dust↗
NASA NTRS1991

Basic research in solar physics

This grant, dating back more than 20 years has supported a variety of investigations of the chromospheres and coronae of the Sun and related cool stars by the Principal Investigator, his postdocs and graduate students, and colleagues at other institutions. This work involved studies of radiative transfer and spectral line formation theory, and the application of these techniques to the analysis of spectra obtained from space and ground-based observatories in the optical, ultraviolet, x-ray and radio portions of the spectrum. Space observations have included the analysis of spectra from OSO-7, Skylab, SMM, and the HRTS rocket experiments. Recent work has concentrated on the interaction of magnetic fields, plasma and radiation in the outer atmospheres of the Sun and other magnetically active stars with different fundamental parameters. Our study of phenomena common to the Sun and stars, the 'solar-stellar connection', can elucidate the fundamental physics, because spatially-resolved observations of the Sun provide us with the 'groundtruth,' while interpretation of stellar data permit us to isolate those parameters critical to stellar activity. Recently, we have studied the differences in physical properties between solar regions of high magnetic flux density and the surrounding plasma. High-resolution CN and CO spectroheliograms have been used to model the thermal inhomogeneities driven by unstable CO cooling, and we have analyzed spatially resolved UV spectra from HRTS to model the thermal structure and energy balance of small-scale structures. The study of nonlinear relations between atmospheric radiative losses and the photospheric magnetic flux density has been continued. We have also proposed a new model for the decay of plages by random walk diffusion of magnetic flux. Our analysis of phenomena common to the Sun and stars included the application of available spectroscopic diagnostics, establishing evidence that the atmospheres of the least active stars are heated at a 'basal' rate that is also found in the centers of solar supergranules, and using the Doppler-imaging technique to measure the position, size, and brightness of stellar active regions. We are computing multi-component models for solar and stellar atmospheres, and models for coronal loops and for the transition-region down flows. The study of solar and stellar flares permits us to assess the role of turbulent energy transport, to pinpoint the mechanism behind Type I radio bursts, to determine whether plasma radiation or cyclotron maser is responsible for microwave flares on M dwarfs, and to extend our knowledge of the basic physics pertinent to cyclotron-maser processes operating on the Sun.

Linsky, Jeffrey L.↗
NASA NTRS2000

Capacity of Pulse-Position Modulation (PPM) on Gaussian and Webb Channels

This article computes the capacity of various idealized soft-decision channels modeling an optical channel using an avalanche photodiode detector (APD) and pulse-position modulation (PPM). The capacity of this optical channel depends in a complicated way on the physical parameters of the APD and the constraints imposed by the PPM orthogonal signaling set. This article attempts to identify and separate the effects of several fundamental parameters on the capacity of the APD-detected optical PPM channel. First, an overall signal-to-noise ratio (SNR) parameter is de ned such that the capacity as a function of a bit-normalized version of this SNR drops precipitously toward zero at quasi-brick-wall limits on bit SNR that are numerically the same as the well-understood brick-wall limits for the standard additive white Gaussian noise (AWGN) channel. A second parameter is used to quantify the effects on capacity of one unique facet of the optical PPM channel (as compared with the standard AWGN channel) that causes the noise variance to be higher in signal slots than in nonsignal slots. This nonuniform noise variance yields interesting capacity effects even when the channel model is AWGN. A third parameter is used to measure the effects on capacity of the difference between an AWGN model and a non-Gaussian model proposed by Webb (see reference in [2]) for approximating the statistics of the APD-detected optical channel. Finally, a fourth parameter is used to quantify the blending of a Webb model with a pure AWGN model to account for thermal noise. Numerical results show that the capacity of M-ary orthogonal signaling on the Webb channel exhibits the same brick-wall Shannon limit, (M ln 2)=(M 1), as on the AWGN channel ( 1:59 dB for large M). Results also compare the capacity obtained by hard- and soft-output channels and indicate that soft-output channels o er a 3-dB advantage.

Dolinar, S.↗
NASA NTRS2003

Gamma-ray Burst Energetics an the Gamma-ray Burst Hubble Diagram: Promises and Limitations

We present a complete sample of 29 gamma-ray bursts (GRBs) for which it has been possible to determine temporal breaks (or limits) from their afterglow light curves. We interpret these breaks within the framework of the uniform conical jet model, incorporating realistic estimates of the ambient density and propagating error estimates on the measured quantities. In agreement with our previous analysis of a smaller sample, the derived jet opening angles of those 16 bursts with redshifts result in a narrow clustering of geometrically corrected gamma-ray energies about 1.33 x 10(exp 51) ergs; the burst-to-burst variance about this value is 0.35 dex, a factor of 2.2. Despite this rather small scatter, we demonstrate in a series of GRB Hubble diagrams that the current sample cannot place meaningful constraints upon the fundamental parameters of the universe. Indeed, for GRBs to ever be useful in cosmographic measurements, we argue the necessity of two directions. First, GRB Hubble diagrams should be based upon fundamental physical quantities such as energy, rather than empirically derived and physically ill-understood distance indicators (such as those based upon prompt burst time-profiles and spectra). Second, a more homogeneous set should be constructed by culling subclasses from the larger sample. These subclasses, although now first recognizable by deviant energies, ultimately must be identifiable by properties other than those directly related to energy. We identify a new subclass of GRBs (" f-GRBs ") that appear both underluminous by factors of at least 10 and exhibit a rapid fading (f(sub nu is proportional to t(sup -2) at early times (t < or = 0.5 day). About 10%-20% of observed long-duration bursts appear to be f-GRBs.

Bloom, J. S.↗
NASA NTRS2018

HST/GHRS Observations of Cool, Low-Gravity Stars. VI. Mass-Loss Rates and Wind Parameters for M Giants

The photon-scattering winds of M giants absorb parts of the chromospheric emission lines and produce self-reversed spectral features in high-resolution Hubble Space Telescope (HST)/GHRS spectra. These spectra provide an opportunity to assess fundamental parameters of the wind, including flow and turbulent velocities, the optical depth of the wind above the region of photon creation, and the star’s mass-loss rate. This paper is the last paper in the series “GHRS Observations of Cool, Low-Gravity Stars”; the last several have compared empirical measurements of spectral emission lines with models of the winds and mass loss of K giants and supergiants. We have used the Sobolev with Exact Integration radiative transfer code, along with simple models of the outer atmosphere and wind, to determine and compare the wind characteristics of the two M-giant stars, gamma Cru (M3.5III) and mu Gem (M3IIIab), with previously derived values for low-gravity K-stars. The analysis specifies the wind parameters and calculates line profiles for the Mg II resonance lines, in addition to a range of unblended Fe II lines. Our line sample covers a large range of wind opacities and, therefore, probes a range of heights in the atmosphere. Our results show that mu Gem has a slower and more turbulent wind than gamma Cru. Also, mu Gem has a weaker chromosphere, in terms of surface flux, with respect to gamma Cru. This suggests that mu Gem is more evolved than gamma Cru. Comparing the two M giants in this work with previously studied K-giant and supergiant stars (alpha Tau, gamma Dra, and lambda Vel) reveals that the M giants have slower winds than the earlier giants, but exhibit higher mass-loss rates. Our results are interpreted in the context of the winds being driven by Alfvén waves.

chromospheric emission lines↗
NASA NTRS1989

Wavelet analysis introduction and application to radar scattering from water waves

Double-parameter expansions, leading to an instantaneous multiscale analysis, are used to obtain time-frequency graphs from time-series data for interpretation of scatterometer response to sea surface geometry. This method is used to define, as well as possible, one-dimensional signal input (elevation and slope). However, some important fundamental parameters, such as the asymmetric development of short scales in crests and troughs, the long-wave amplitude modulation, the different zero-crossings, and so forth, are easily extracted from the wavelet images.

Chapron, B.↗