Search NASA⌕ Search

SEARCH · Search NASA

Results for “future tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Autonomous Integrated Receive System (AIRS) requirements definition. Volume 2: Design and development

Functional requirements and specifications are defined for an autonomous integrated receive system (AIRS) to be used as an improvement in the current tracking and data relay satellite system (TDRSS), and as a receiving system in the future tracking and data acquisition system (TDAS). The AIRS provides improved acquisition, tracking, bit error rate (BER), RFI mitigation techniques, and data operations performance compared to the current TDRSS ground segment receive system. A computer model of the AIRS is used to provide simulation results predicting the performance of AIRS. Cost and technology assessments are included.

Chie, C. M.↗
NASA NTRS1978

Orbiting Deep Space Relay Station (ODSRS): DSN feasibility study report

Future tracking requirements and advantages over earth based stations justify the design of an orbiting, free flying very long base interferometry system to provide high resolution maps of celestial radio sources. Moderate technology development is required for the following: 30 meter to 60 meter diameter deployable parabolic antennas with less than 2 millimeters surface tolerance; a momentum wheel attitude control system with few arc/second accuracy; solar power design; a hydrogen maser atomic frequency standard; and the cryogenic receivers. The system must meet current Deep Space tracking capabilities as a minimum, and the technology must be compatible with system performance growth in the future. System lifetime must be ten years without major refurbishing.

Thornton, T.↗
NASA NTRS1971

System safety engineering in the development of advanced surface transportation vehicles

Applications of system safety engineering to the development of advanced surface transportation vehicles are described. As a pertinent example, the paper describes a safety engineering efforts tailored to the particular design and test requirements of the Tracked Air Cushion Research Vehicle (TACRV). The test results obtained from this unique research vehicle provide significant design data directly applicable to the development of future tracked air cushion vehicles that will carry passengers in comfort and safety at speeds up to 300 miles per hour.

Harry E. Arnzen↗
NASA NTRS1978

JPL 2-to-the-20th-power channel 300 MHz bandwidth digital spectrum analyzer

A million (two to the 20th power) channel, 300 MHz bandwidth, digital spectrum analyzer was considered. The design, fabrication, and maintenance philosophy of the modular, pipelined, fast fourier transform (FFT) hardware are described. The spectrum analyzer will be used to examine the region from 1.4 GHz to 26 GHz for radio frequency interference which may be harmful to present and future tracking missions of the Deep Space Network. The design has application to the search for extraterrestrial intelligence signals and radio science phenomena.

Morris, G. A., Jr.↗
NASA NTRS1993

Magellan spacecraft and memory state tracking: Lessons learned, future thoughts

Numerous studies have been dedicated to improving the two main elements of Spacecraft Mission Operations: Command and Telemetry. As a result, not much attention has been given to other tasks that can become tedious, repetitive, and error prone. One such task is Spacecraft and Memory State Tracking, the process by which the status of critical spacecraft components, parameters, and the contents of on-board memory are managed on the ground to maintain knowledge of spacecraft and memory states for future testing, anomaly investigation, and on-board memory reconstruction. The task of Spacecraft and Memory State Tracking has traditionally been a manual task allocated to Mission Operations Procedures. During nominal Mission Operations this job is tedious and error prone. Because the task is not complex and can be accomplished manually, the worth of a sophisticated software tool is often questioned. However, in the event of an anomaly which alters spacecraft components autonomously or a memory anomaly such as a corrupt memory or flight software error, an accurate ground image that can be reconstructed quickly is a priceless commodity. This study explores the process of Spacecraft and Memory State Tracking used by the Magellan Spacecraft Team highlighting its strengths as well as identifying lessons learned during the primary and extended missions, two memory anomalies, and other hardships encountered due to incomplete knowledge of spacecraft states. Ideas for future state tracking tools that require minimal user interaction and are integrated into the Ground Data System will also be discussed.

Bucher, Allen W.↗
NASA NTRS1972

Future techniques for tracking of synchronous satellites

A tracking system error analysis computer program is reported to study the feasibility of using range sum and range-rate sum measurements through a synchronous satellite to a user satellite, and range sum and range-rate sum measurements through a synchronous satellite to a ground based transponder for tracking of synchronous satellites. Error analysis transformed noise, bias, ground station location and orbit uncertainties into expected uncertainties in each of the orbits after tracking. Results show that both of the proposed measurement methods are feasible for determining and refining the orbits of future synchronous satellites.

Cooley, J. L.↗
NASA NTRS1994

Mark Tracking: Position/orientation measurements using 4-circle mark and its tracking experiments

Future space robots require position and orientation tracking with visual feedback control to track and capture floating objects and satellites. We developed a four-circle mark that is useful for this purpose. With this mark, four geometric center positions as feature points can be extracted from the mark by simple image processing. We also developed a position and orientation measurement method that uses the four feature points in our mark. The mark gave good enough image measurement accuracy to let space robots approach and contact objects. A visual feedback control system using this mark enabled a robot arm to track a target object accurately. The control system was able to tolerate a time delay of 2 seconds.

Kanda, Shinji↗
NASA NTRS2008

Ares I-X Flight Test - On the Fast Track to the Future

In less than two years, the National Aeronautics and Space Administration (NASA) will launch the Ares I-X mission. This will be the first flight of the Ares I crew launch vehicle, which, together with the Ares V cargo launch vehicle, will send humans to the Moon and beyond. Personnel from the Ares I-X Mission Management Office (MMO) are finalizing designs and fabricating vehicle hardware for an April 2009 launch. Ares I-X will be a suborbital development flight test that will gather critical data about the flight dynamics of the integrated launch vehicle stack; understand how to control its roll during flight; better characterize the severe stage separation environments that the upper stage engine will experience during future flights; and demonstrate the first stage recovery system. NASA also will modify the launch infrastructure and ground and mission operations. The Ares I-X Flight Test Vehicle (FTV) will incorporate flight and mockup hardware similar in mass and weight to the operational vehicle. It will be powered by a four-segment Solid Rocket Booster (SRB), which is currently in Shuttle inventory, and will include a fifth spacer segment and new forward structures to make the booster approximately the same size and weight as the five-segment SRB. The Ares I-X flight profile will closely approximate the flight conditions that the Ares I will experience through Mach 4.5, up to approximately130,OOO feet and through maximum dynamic pressure ("Max Q") of approximately 800 pounds per square foot. Data from the Ares I-X flight will support the Ares I Critical Design Review (CDR), scheduled for 2010. Work continues on Ares I-X design and hardware fabrication. All of the individual elements are undergoing CDRs, followed by an integrated vehicle CDR in March 2008. The various hardware elements are on schedule to begin deliveries to Kennedy Space Center (KSC) in early September 2008.

Davis, Stephan R.↗
NASA NTRS2018

NASA Space Network Project Operations Management: Past, Present and Future for the Tracking and Data Relay Satellite Constellation

The NASA Space Network (SN) Operations began with the launch of the first Tracking and Data Relay Satellite (TDRS-1) on April 4, 1983 with on-orbit operations conducted from the White Sands Ground Terminal (WSGT) in Las Cruces, New Mexico. Over the past 35 years, the SN has evolved to its current configuration comprised of four strategically located satellite ground stations and a constellation of ten geosynchronous Tracking and Data Relay Satellites that provide customer support 24 hours a day, 365 days per year, at an unprecedented 99.9% proficiency. The Space Network provides total global Communications, Data Relay, and Tracking services for Low Earth Orbiting (LEO) satellites, Human Space Flight, Expendable Launch Vehicles (ELV) and Scientific missions. This paper will address the Operations Management of the NASA Space Network and the complexities associated with this responsibility, as well as significant mission support highlights.

Sobchak, Ted↗
NASA NTRS1987

The NASA tracking and data acquisition networks - Their history and their future

The NASA Tracking and Data Acquisition Networks were begun in the late 1950s as a part of the U.S. activities associated with the 1958-59 International Geophysical Year. The first network, the Minitrack Net, evolved into the Space Tracking and Data Acquisition Network (STADAN) for support of scientific satellites in earth orbit. The NASA Mercury and Apollo manned flight programs produced more demanding requirements for near real-time tracking, communications, and orbit determination, thus providing the impetus for new, more sophisticated networks. The Deep Space Network was also created to meet unique requirements of the planetary exploration programs. All of these programs necessitated establishing ground stations in various countries around the world, thus promoting the concept of international cooperation in space activities which NASA has fostered in many programs. This paper traces these networks from their beginnings through the various stages of development and introduction of new technologies to meet the requirements of increasingly more complex space missions. The paper also discusses the planning for new capabilities for tracking, data acquisition and communications support of future programs, including particularly the Space Station in the next decade.

Force, Charles T.↗
NASA NTRS1995

Potential future applications for the tracking and data relay satellite II (TDRS II) system

During the conceptual design phases of the tracking and data relay satellite (TDRS) II system provision was made for a future service growth (FSG) payload with an undefined mission. The intent of the FSG was to provide a resource for TDRS II applications which would be available to meet a change in requirements for the operational TDRS II system. This paper summarizes the effect of the consideration of potential FSG applications imposed on the tracking and data relay satellite (TDRS) II system. The following applications were considered as FSG candidates: An optical 650 Mbps space-to-space link (SSL) coupled to an optical or RF downlink, an RF or optical crosslink to extend the baseline TDRS II system coverage, -zone of exclusion (ZOE) closure, relay for lunar communications either RF or optically, and relay for Martian communications either RF or optically. This paper summarizes work done in the 1990 time frame on the above stated applications. Since then, NASA has sponsored several studies (during phase B of the TDRS II development cycle) of the ZOE closure application of the FSG. The purpose of this paper is to report on the efforts previously considered for the FSG. A previous paper was presented at the 1991 Congress related to the second application above. This paper extends this effort to the four stated applications.

Gibbons, Richard C.↗
NASA NTRS1994

Tracking system options for future altimeter satellite missions

Follow-on missions to provide continuity in the observation of the sea surface topography once the successful TOPEX/POSEIDON (T/P) oceanographic satellite mission has ended are discussed. Candidates include orbits which follow the ground tracks of T/P GEOSAT or ERS-1. The T/P precision ephemerides, estimated to be near 3 cm root-mean-square, demonstrate the radial orbit accuracy that can be achieved at 1300 km altitude. However, the radial orbit accuracy which can be achieved for a mission at the 800 km altitudes of GEOSAT and ERS-1 has not been established, and achieving an accuracy commensurate with T/P will pose a great challenge. This investigation focuses on the radial orbit accuracy that can be achieved for a mission in the GEOSAT orbit. Emphasis is given to characterizing the effects of force model errors on the estimated radial orbit accuracy, particularly those due to gravity and drag. The importance of global, continuous tracking of the satellite for reduction in these sources of orbit error is demonstrated with simulated GPS tracking data. A gravity tuning experiment is carried out to show how the effects of gravity error may be reduced. Assuming a GPS flight receiver with a full-sky tracking capability, the simulation results indicate that a 5 cm radial orbit accuracy for an altimeter satellite in GEOSAT orbit should be achievable during low-drag atmospheric conditions and after an acceptable tuning of the gravity model.

Davis, G. W.↗
NASA NTRS2008

The Next 25 Years of Deep Space Navigation

This slide presentation reviews the missions that will be flown into deep space in the next 25 years, the navigational challenges for these missions, and the strategies that will be used to overcome these challenges. The challenges include: (1) an incresed need for autonomous navigation, (2) an increased use of in-situ and optical navigation, (3) an increased use of low-thrust propulsion, (4) an increased need for higher accuracy in guidance, navigation, and control, and an increased need for integration between flight path and attitude control. The enabling strategies that are planned for use are: (1) Advance Radio-Metric Tracking Capabilities, (2) Expand the Use of Optical Navigation, (3) Develop General-Purpose Autonomous Navigation Capabilities, (4) Improve Frequency and Timing Systems, and (5) Develop In-situ Tracking Infrastructure. Future trends that are being developed are Optical and Autonomous Navigation

optical navigation↗