Search NASA⌕ Search

SEARCH · Search NASA

Results for “gas atomization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Visualization of Atomization Gas Flow and Melt Break-up Effects in Response to Nozzle Design

Both powder particle size control and efficient use of gas flow energy are highly prized goals for gas atomization of metal and alloy powder to minimize off-size powder inventory (or 'reverb') and excessive gas consumption. Recent progress in the design of close-coupled gas atomization nozzles and the water model simulation of melt feed tubes were coupled with previous results from several types of gas flow characterization methods, e.g., aspiration measurements and gas flow visualization, to make progress toward these goals. Size distribution analysis and high speed video recordings of gas atomization reaction synthesis (GARS) experiments on special ferritic stainless steel alloy powders with an Ar+O{sub 2} gas mixture were performed to investigate the operating mechanisms and possible advantages of several melt flow tube modifications with one specific gas atomization nozzle. In this study, close-coupled gas atomization under closed wake gas flow conditions was demonstrated to produce large yields of ultrafine (dia.<20 {mu}m) powders (up to 32%) with moderate standard deviations (1.62 to 1.99). The increased yield of fine powders is consistent with the dual atomization mechanisms of closed wake gas flow patterns in the near-field of the melt orifice. Enhanced size control by stabilized pre-filming of the melt with a slotted trumpet bell pour tube was not clearly demonstrated in the current experiments, perhaps confounded by the influence of the melt oxidation reaction that occurred simultaneously with the atomization process. For this GARS variation of close-coupled gas atomization, it may be best to utilize the straight cylindrical pour tube and closed wake operation of an atomization nozzle with higher gas mass flow to promote the maximum yields of ultrafine powders that are preferred for the oxide dispersion strengthened alloys made from these powders.

36 MATERIALS SCIENCE↗

Reactive gas atomization processing for Fe-based ODS alloys

Gas atomization reaction synthesis was employed as a simplified method for processing oxide dispersion forming precursor Fe-based powders (e.g., Fe–Cr–Y–Hf). During this process a reactive atomization gas (i.e., Ar–O2) was used to oxidize the powder surfaces during primary break-up and rapid solidification of the molten alloy. This resulted in envelopment of the powders by an ultra-thin (t < 50 nm) metastable Cr-enriched oxide shell that was used as a vehicle to transport oxygen into the consolidated microstructure. Subsequent elevated temperature heat treatment promoted thermodynamically driven oxygen exchange reactions between trapped films of Cr-enriched oxide and internal (Y, Hf)-enriched intermetallic precipitates, resulting in highly stable nano-metric mixed oxide dispersoids (i.e., Y–Hf–O) that were identified with X-ray diffraction. Transmission electron microscopy and atom probe tomography results also revealed that the size and distribution of the dispersoids were found to depend strongly on the original rapidly solidified microstructure. To exploit this, several oxide dispersion strengthened microstructures were engineered from different powder particle size ranges, illustrating microstructural control as a function of particle solidification rate. Additionally, preliminary thermal–mechanical processing was used to develop a fine scale dislocation substructure for ultimate strengthening of the alloy.

36 MATERIALS SCIENCE↗

Bulk and surface controlled diffusion of fission gas atoms

Fission gas retention and release impact nuclear fuel performance by, e.g., causing fuel swelling leading to mechanical interaction with the clad, increasing the plenum pressure and reducing the gap thermal conductivity. All of these processes are important to understand in order to optimize operating conditions of nuclear reactors and to simulate accident scenarios. Most fission gases have low solubility in the fuel matrix, which is especially pronounced for large fission gas atoms such as Xe and Kr, and as a result there is a significant driving force for segregation of gas atoms to extended defects such as grain boundaries or dislocations and subsequently for nucleation of gas bubbles at these sinks. Several empirical or semi-empirical models have been developed for fission gas release in nuclear fuels, e.g. . One of the most commonly used models in fuel performance codes was published by Massih and Forsberg. This model is similar to the early Booth model in that it applies an equivalent sphere to separate bulk UO 2 from grain boundaries represented by the sphere circumference. Compared to the Booth model, it also captures trapping at grain boundaries, fission gas resolution and it describes release from the boundary by applying timedependent boundary conditions to the circumference. In this work we focus on the step where fission gas atoms diffuse from the grain interior to the grain boundaries. The original Massih-Forsberg model describes this process by applying an effective diffusivity divided into three temperature regimes. In this report we present results from density functional theory calculations (DFT) that are relevant for the high (D 3 ) and intermediate (D 2 ) temperature diffusivities of fission gases. The results are validated by making a quantitative comparison to Turnbull's and Matzke's data. For the intrinsic or high temperature regime we report activation energies for both Xe and Kr diffusion in UO 2±x , which compare favorably to available experiments. This is an extension of previous work. In particular, it applies improved chemistry models for the UO 2±x nonstoichiometry and its impact on the fission gas activation energies. The derivation of these models follows the approach that used in our recent study of uranium vacancy diffusion in UO 2 . Also, based on the calculated DFT data we analyze vacancy enhanced diffusion mechanisms in the intermediate temperature regime. In addition to vacancy enhanced diffusion we investigate species transport on the (111) UO 2 surface. This is motivated by the formation of small voids partially filled with fission gas atoms (bubbles) in UO 2 under irradiation, for which surface diffusion could be the rate-limiting transport step. Diffusion of such bubbles constitutes an alternative mechanism for mass transport in these materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Laser-Enabled Auger Decay in Rare-Gas Atoms

In rare-gas atoms, Auger decay in which an inner-valence shell ns hole is filled is not energetically allowed. However, in the presence of a strong laser field, a new laser-enabled Auger decay channel can open up to increase the double-ionization yield. This process is efficient at high laser intensities, where an ns hole can be filled within a few femtoseconds of its creation. This novel laser-enabled Auger decay process is of fundamental importance for controlling electron dynamics in atoms, molecules, and materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Friction consolidation of gas-atomized Fe−Si powders for soft magnetic applications

Soft magnetic materials are often limited in scalability due to conventional processes that do not retain beneficial microstructures, and their associated physical properties, during densification. In this work, friction consolidation (FC) has been studied to fabricate Fe−Si soft magnetic materials from gas-atomized powder precursors. Fe−Si powder is consolidated using variable pressure and tool rotation speed in an effort to evaluate this unique densification approach for potential improvements in magnetic properties. FC, due to the high shear deformation involved, is shown to result in uniform gradual grain structure refinement across the consolidated workpiece from the center nearest the tool to the edge. Magnetic properties along different orientations indicate little, if any, textural orientation in the refined grain structure. The effect of annealing on the magnetic properties is evaluated and shown to decrease coercivity. FC processing was able to retain the magnetization of the original gas-atomized powders but further process optimization is needed to reach the optimal coercivity for the soft magnetic materials applications. - Highlights: •Friction stir processing was utilized to consolidate Fe−Si soft magnetic powders. •The resultant microstructure and magnetic properties were correlated to the processing conditions. •Friction consolidation refined the grain size of the materials by ~ 40%. •Annealing successfully reduced the coercivity induced by the stress during processing. •The results shine light on the possible scaling up of nanostructured materials.

36 MATERIALS SCIENCE↗

Highly tuned gas atomization for controlled preparation of coarse powder

While close-coupled gas atomization has been demonstrated for highly controlled production of fine powders in many alloy systems, defense applications for Mg powder demand that such an atomization system also be capable of producing a narrow standard deviation for coarse Mg powders. To develop this capability, a series of 5 gas atomization experiments were conducted with Al, as a less hazardous surrogate for Mg, over a range of a very low atomization gas pressures. The optimum result produced an average particle diameter of about 460 {micro}m with a standard deviation of 1.53 using Ar atomization gas, sufficiently close to the 500 {micro}m target size. These experiments achieved the process uniformity needed for this narrow standard deviation by stabilizing melt filming with an expanded discrete jet, close-coupled atomization nozzle and a slotted trumpet bell pour tube. Initial analysis of the size results indicated that decreased atomization gas velocity, acting within the acceleration wave model, was the key controlling variable in this low-pressure regime. No consistent influence of gas/melt mass flow ratio was detected in the data. Experimental observation of the atomization spray images also indicated that a practical lower limit to atomization gas pressure is about 69 kPa for achieving atomization process uniformity with the method of this study.

36 MATERIALS SCIENCE↗

Gas atomized precursor alloy powder for oxide dispersion strengthened ferritic stainless steel

Gas atomization reaction synthesis (GARS) was employed as a simplified method for producing precursor powders for oxide dispersion strengthened (ODS) ferritic stainless steels (e.g., Fe-Cr-Y-(Ti,Hf)-O), departing from the conventional mechanical alloying (MA) process. During GARS processing a reactive atomization gas (i.e., Ar-O 2 ) was used to oxidize the powder surfaces during primary break-up and rapid solidification of the molten alloy. This resulted in envelopment of the powders by an ultra-thin (t < 150 nm) metastable Cr-enriched oxide layer that was used as a vehicle for solid-state transport of O into the consolidated microstructure. In an attempt to better understand the kinetics of this GARS reaction, theoretical cooling curves for the atomized droplets were calculated and used to establish an oxidation model for this process. Subsequent elevated temperature heat treatments, which were derived from Rhines pack measurements using an internal oxidation model, were used to promote thermodynamically driven O exchange reactions between trapped films of the initial Cr-enriched surface oxide and internal Y-enriched intermetallic precipitates. This novel microstructural evolution process resulted in the successful formation of nano-metric Y-enriched dispersoids, as confirmed using high energy X-ray diffraction and transmission electron microscopy (TEM), equivalent to conventional ODS alloys from MA powders. The thermal stability of these Y-enriched dispersoids was evaluated using high temperature (1200°C) annealing treatments ranging from 2.5 to 1,000 hrs of exposure. In a further departure from current ODS practice, replacing Ti with additions of Hf appeared to improve the Y-enriched dispersoid thermal stability by means of crystal structure modification. Additionally, the spatial distribution of the dispersoids was found to depend strongly on the original rapidly solidified microstructure. To exploit this, ODS microstructures were engineered from different powder particle size ranges, illustrating microstructural control as a function of particle solidification rate. The consolidation of ultra-fine powders (dia. ≤ 5μm) resulted in a significant reduction in dispersoid size and spacing, consistent with initial scanning electron microscopy studies on as-atomized cross-sectioned particles that suggested that these powders solidified above the threshold velocity to effectively solute trap Y within the α-(Fe,Cr) matrix. Interestingly, when the solidification velocity as a function of particle size was extracted from the aforementioned theoretical particle cooling curves, it could be offered as supporting evidence for these microstructure observations. Thermal-mechanical treatments also were used to create and evaluate the stability of a dislocation substructure within these alloys, using microhardness and TEM analysis of the alloy sub-grain and grain structure. Moreover, elevated temperature tensile tests up to 800°C were used to assess the initial mechanical strength of the ODS microstructure.

36 MATERIALS SCIENCE↗

Novel Cooling Rate Correlations in Molten Metal Gas Atomization

The cooling rate in molten metal gas atomization is the key determining factor for the microstructure of metal powders. Mathematical expressions for cooling rates often include the melt droplet diameter and a pre-exponential factor describing the materials and gas properties. A new mathematical cooling rate correlation for rapidly solidified melt droplets is proposed based on heat flow considerations during gas atomization. The model approach takes process conditions such as gas-to-melt mass flow ratio and the initial gas temperature into account. The mathematical formulation was experimentally developed using secondary dendrite arm spacing method. For this purpose, a Cu-6wt pct Sn alloy was atomized with close-coupled (CCA) and free-fall atomization (FFA). A novel approach was made to predict the pre-exponential factor that allows the transferability to other materials. Our correlation for the cooling rate and the pre-exponential factor was validated by experimental data from the literature. The novel correlation type is valid for two different atomizing systems (FFA and CCA), suggesting that it may be applicable to entirely different gas atomization systems.

36 MATERIALS SCIENCE↗

Development of Low Cost Gas Atomization of Precursor Powders for Simplified ODS Alloy Production

A novel gas atomization reaction synthesis (GARS) method was developed in this project to enable production (at our partner’s facility) a precursor Ni-Cr-Y-Ti powder with a surface oxide and an internal rare earth (RE) containing intermetallic compound (IMC) phase. Consolidation and heat-treatment experiments were performed at Ames Lab to promote the exchange of oxygen from the surface oxide to the RE intermetallic to form nano-metric oxide dispersoids. Alloy selection was aided by an internal oxidation and serial grinding experiments at Ames Lab and found that Hf-containing alloys may form more stable dispersoids than Ti-containing alloy, i.e., the Hf-containing system exhibited five different oxide phases and two different intermetallics compared to the two oxide phases and one intermetallic in the Ti-containing alloys. Since the simpler Ti-containing system was less complex to characterize, and make observations on the effects of processing parameters, the Ti-containing system was selected by Ames Lab for experimental atomization trials at our partner. An internal oxidation model was developed at Ames Lab and used to predict the heat treatment times necessary for dispersoid formation as a function of powder size and temperature. A new high-pressure gas atomization (HPGA) nozzle was developed at Ames Lab with the aim of promoting fine powder production at scales similar to that of the high gas-flow and melt-flow of industrial atomizers. The atomization nozzle was characterized using schlieren imaging and aspiration pressure testing at Ames Lab to determine the optimum melt delivery tip geometry and atomization pressure to promote enhanced secondary atomization mechanisms. Six atomization trials were performed at our partner to investigate the effects of: gas atomization pressure and reactive gas concentration on the particle size distribution (PSD) and the oxygen content of the resulting powder. Also, the effect on the rapidly solidified microstructure (as a function of powder size) was investigated at Ames Lab as a function of reactive gas composition and bulk alloy composition. The results indicated that the pulsatile gas atomization mechanism and a significantly enhanced yield of fine powders reported in the literature for this type of process were not observed. Also it was determined that reactive gas may marginally improve the fine powder yield but further experiments are required. The oxygen content in the gas also did not have any detrimental effect on the microstructure (i.e. did not significantly reduce undercooling). On the contrary, the oxygen addition to the atomization gas may have mitigated some potent catalytic nucleation sites, but not enough to significantly alter the microstructure vs. particle size relationship. Overall the downstream injection of oxygen was not found to significantly affect either the particle size distribution or undercooling (as inferred from microstructure and XRD observations) but injection further upstream, including in the gas atomization nozzle, remains to be investigated in later work.

36 MATERIALS SCIENCE↗

Theory and experiment on laser-enabled inner-valence Auger decay of rare-gas atoms

In rare-gas atoms, an inner-valence shell ns hole cannot be filled by Auger decay because of an energy deficiency. We show theoretically and experimentally that by adding a moderately intense infrared laser, Auger decay is possible with decay rates increasing dramatically for laser intensities {>=}10{sup 13} W/cm{sup 2}. For Xe atoms, the simulated laser-enabled Auger decay yields are comparable with the experimental one, while for Ar atoms, the simulated ones are much smaller. We attribute the discrepancies to screening effects of the photoelectron. Laser-enabled Auger decay is of fundamental importance for understanding attosecond science, and is also important for experimental applications in ultrafast atomic, molecular, and materials dynamics using x rays. More importantly it may provide a way to control the Auger decay time and selectively break chemical bonds of molecules using a control infrared laser field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical Simulation and Validation of Gas and Molten Metal Flows in Close-Coupled Gas Atomization

Molten metal atomization in close-coupled gas atomization dies can operate between two limiting conditions, jetting and filming, together with several complex mechanisms: liquid-gas drafting, downward/upward shearing, melt bouncing, etc. Liquid jet deformation depends on flow and geometric parameters, such as liquid Reynolds, liquid Weber, and gas Mach numbers, as well as gas jet apex angle and melt tube tip extension and aspect ratio, among others. Understanding their effect is of importance for the metal powder making industry. Numerical gas atomization studies can provide approximated flow information and consider a wide range of conditions, beyond experimental reach. Here, 3D high-resolution simulations employing a 5-equation compressible flow model coupled with the volume-of-fluid method are compared with experiments, for liquid Weber number in the range of 1–30 and liquid Reynolds number below 10,000. This validation explores the predicting capabilities of the numerical model.

Hernandez, F.↗

The atomic gas sequence and mass–metallicity relation from dwarfs to massive galaxies

Galaxy scaling relations provide insights into the processes that drive galaxy evolution. The extension of these scaling relations into the dwarf galaxy regime is of particular interest. This is because dwarf galaxies represent a crucial stage in galaxy evolution, and understanding them could also shed light on their role in reionizing the early Universe. There is currently no consensus on the processes that dominate the evolution of dwarfs. In this work, we constrain the atomic gas sequence (stellar mass versus atomic gas fraction) and mass–metallicity relation (stellar mass versus gas-phase metallicity) from dwarf (⁠10 6.5 M ⊙ ⁠) to massive (⁠10 11.5 M ⊙ ) galaxies in the local Universe. The combined optical and 21-cm spectroscopic observations of the Dark Energy Spectroscopic Instrument and Arecibo Legacy Fast ALFA surveys allow us to constrain both scaling relations simultaneously. We find a slope change of the atomic gas sequence at a stellar mass of ~10 9 M ⊙ ⁠. We also find that the shape and scatter of the atomic gas sequence and mass–metallicity relation are strongly linked for both dwarfs and more massive galaxies. Consequently, the low-mass slope change of the atomic gas sequence is imprinted onto the mass–metallicity relation of dwarf galaxies. The mass scale of the measured slope change is consistent with a predicted escape velocity threshold below which low-mass galaxies experience significant supernova-driven gas loss, as well as with a reduction in cold gas accretion onto more massive galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Specific Adaptation of Gas Atomization Processing for Al-Based Alloy Powder for Additive Manufacturing

The charge for each gas atomization experiment was provided by Alcoa and consisted of cast blocks cut into 1 inch by 1 inch square rods of the chosen aluminum alloys. The atmosphere in the melting chamber and connected atomization system was evacuated with a mechanical pump prior to backfilling with ultrahigh purity (UHP grade) Ar. The melt was contained in a bottom tapped alumina crucible with an alumina stopper rod to seal the exit while heating to a pouring temperature of 1000 – 1400°C. When the desired superheat was reached, the stopper rod was lifted and melt flowed through pour tube and was atomized with Ar from a 45-22-052-409 gas atomization nozzle (or atomization die), having a jet apex angle of 45 degrees with 22 cylindrical gas jets (each with diameter of 1.32 mm or 0.052 inches) arrayed around the axis of a 10.4 mm central bore. The Ar atomization gas supply regulator pressure was set to produce nozzle manifold pressures for the series of runs at pressures of 250-650 psi. Secondary gas halos of Ar+O 2 and He also were added to the interior of the spray chamber at various downstream locations for additional cooling of the atomized droplets, surface passivation, and to prevent coalescence of the resulting powder.

36 MATERIALS SCIENCE↗

Gas Atomization Precursor Powder Approach for Simplified Large-Scale Production of Oxide Dispersion

Oxide dispersion strengthened (ODS) Ni-based alloys show promise for future energy applications that require high-temperature and oxidation resistant properties. Gas atomization reaction synthesis (GARS), with a mixed (Ar/O{sub 2}) atomization gas, is being developed as a simplified route for producing ODS precursor powders. Internal oxidation studies determined Ni-Cr-Y-(Hf or Ti) containing systems are suitable for production of ODS alloys via hot consolidation, which is used to encourage oxygen exchange between the less stable surface oxide phase and reactive alloying elements, resulting in highly stable nano-metric dispersoid formation. Size control of powders is key to optimizing microstructural and strengthening features. Aspiration and, previously, water modeling experiments were used to develop atomization process parameters that encourage controlled powder production while maintaining reduced operating costs when implemented on an industrial scale. For an increase in pour tube extension: aspiration base pressure at any given operating pressure was found to decrease while wake closure pressure was found to increase. Aspiration hysteresis was observed as recorded previously in the literature. Light emission was observed above wake closure pressures.

36 MATERIALS SCIENCE↗

Passivation and alloying element retention in gas atomized powders

A method for gas atomization of a titanium alloy, nickel alloy, or other alumina (Al.sub.2O.sub.3)-forming alloy wherein the atomized particles are exposed as they solidify and cool in a very short time to multiple gaseous reactive agents for the in-situ formation of a passivation reaction film on the atomized particles wherein the reaction film retains a precursor halogen alloying element that is subsequently introduced into a microstructure formed by subsequent thermally processing of the atomized particles to improve oxidation resistance.

36 MATERIALS SCIENCE↗