Search NASA⌕ Search

SEARCH · Search NASA

Results for “geothermometer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Mg/2+/-Fe/2+/ order-disorder in cummingtonite, /Mg, Fe/7Si8O22/OH/2 - A new geothermometer.

Determination of the temperature dependence of the Mg(2+)-Fe(2+) distribution between the M4 site and the M1, M2 and M3 sites in magnesium-rich cummingtonites by Fe-57 Mossbauer resonance spectroscopy. For the basic reversible ion-exchange reaction involved, the Gibbs free energy is estimated to be 3.6 to 4.1 kcal/mole, assuming an ideal solution model at each set of sites. The crystallization temperatures of two cummingtonite-bearing metamorphosed ultrabasic rocks are estimated to be 265 and 290 deg C. The Mossbauer resonance spectra are found to be an effective basis for detecting changes in site occupancies as a function of temperature.

Ghose, S.↗
NASA NTRS1973

Cooling histories of lunar rocks based on opaque mineral geothermometers

The application of experimentally derived data on (1) the Zr partitioning between coexisting ilmenite and ulvospinel and (2) the Ti partitioning between coexisting troilite and ilmenite has allowed the discernment of differences in subsolidus cooling histories of lunar rocks - e.g., the Apollo 15 Type I Mare basalts. The rocks which show Zr partitionings reequilibrated to lower temperature (i.e., below 950 C), as a result of slow cooling, also show evidence for subsolidus reduction of ulvospinel to ilmenite + native Fe. It is suggested that the presence of ulvospinel reduction is not evidence a priori that these rocks have undergone more reducing conditions than the other Apollo 15 Mare basalts; it may only indicate that the cooling rates were slower in that subsolidus temperature range (i.e., much less than 900 C) where oxygen fugacity values were favorable for ulvospinel reduction. The rocks with higher temperature Zr partitionings and no ulvospinel reduction may have cooled under the same fugacity conditions but at a faster rate.

Taylor, L. A.↗
NASA NTRS2003

A Liquidus Geothermometer for SNC, Lunar, and Eucritic Magmas

Two very useful pieces of information about a basalt are its liquidus temperature and liquid line of descent. To determine these, experiments are performed at various temperatures on the composition of interest between the solidus and liquidus. There are numerous examples of such experiments in the literature.

Jones, J. H.↗
NASA NTRS1989

Intensive parameters of enstatite chondrite metamorphism

A geothermometer based on the assemblage kamacite-quartz-enstatite-oldhamite-troilite found in enstatite chondrites is described. Data obtained with the geothermometer reveal that the EL6 meteorites experienced temperatures exceeding 1000 C. These temperatures imply a metal-sulfide melting event that may have fractionated the melt from the source region.

Fogel, Robert A.↗
NASA NTRS2019

Titanium-in-Quartz Geothermometry of Impactites and Peak-Ring Lithologies from the Chicxulub Impact Crater

Since its development by Wark and Watson (2006), the Ti-in-quartz geothermometer (TitaniQ) has been continuously refined and applied to a variety of lithologies from different crustal settings. Assuming quartz crystallized and incorporated Ti under equilibrium conditions and providing TiO2 activity (alpha (sub TiO2)) is reasonably constrained, crystallization temperatures at typical crustal pressures can be calculated. In turn, when crystallization temperatures are independently constrained, Ti-in-quartz can be used as a geobarometer. Here we explore the application of this technique to impact lithologies. Quartz is ubiquitous in terrestrial impact structures in upper crustal settings and can also form as a post-impact hydrothermal mineral. Together with other geothermometers, such as Ti-in-zircon, Ti-in-quartz can potentially help constrain the temperature-pressure conditions during the formation of the pre-impact target rock at terrestrial impact structures, as well as impact-produced and hydrothermally-altered lithologies. This work presents the first systematic Ti-in-quartz study of impactites and granitoid target rocks from the approximately180-kilometer-diameter, end-Cretaceous Chicxulub crater on the Yucatan Peninsula, Mexico, thereby placing new constraints on the emplacement of felsic plutons within the Maya Block in the Paleozoic, impact melt crystallization at approximately 66 Ma (million years ago), and post-impact hydrothermal overprint inside the Chicxulub crater.

Schmieder, Martin↗
NASA NTRS1974

Ferromagnetic resonance studies of thermal effects on lunar metallic Fe phases

Ferromagnetic resonance results of annealing experiments are discussed which illustrate the thermal effects on lunar metallic iron phases already present in a lunar fines sample. Spectral features of ferromagnetic resonance produced in the sample by heat treatments at temperatures between 600 and 1025 C are described which resemble those detected in lunar breccias and crystalline rocks. A correlation is shown to exist between these features and the degree of thermal metamorphism. It is noted that this correlation can be used as a built-in geothermometer or probe to investigate the thermal history and degree of metamorphism of a lunar sample containing metallic iron phases. The thermal history of a metaclastic rock is analyzed in this way, and it is shown that thermal metamorphism is an effective process for increasing relaxation times or the stability of the natural remanent magnetization carried by single-domain metallic iron particles.

Tsay, F.-D.↗
NASA NTRS1977

Some petrological aspects of Imbrium stratigraphy

Descriptions are given of the petrochemistry of two Apennine Front breccias, both ejected to the surface during excavation of Spur Crater. The first clast type is breccia number 15445, a spinel pyroxenite whose mineralogy and petrochemistry are consistent with the original rock type being a garnet pyroxenite. The second rock, breccia 15459, is plutonic norite, in which coarsely exsolved inverted pigeonite is associated with anorthitic plagioclase. Application of mineral geothermometers indicates crystallization of these rocks below 1100 C; hence their textures probably developed largely by solid state recrystallization during impact-metamorphism.

Ridley, W. I.↗
NASA NTRS1978

Partitioning of Ni/2+/ between basaltic and synthetic melts and olivines An experimental study

Olivine/liquid distribution coefficients for Ni in basaltic and simple synthetic melts are found in the 1400-1070 C temperature range. The results suggest that: (1) the Ni distribution coefficients and NiO activity coefficients are strongly temperature dependent, (2) the Ni distribution coefficients are functions of melt composition and structure at a constant temperature although the dependence is small for most basaltic magmas, (3) differences in melt composition do not significantly influence generally 'basaltic' melts, (4) the Ni distribution coefficients may be used as geothermometers to predict the olivine crystallization temperatures of basaltic magmas to within plus or minus 50 C, (5) the Ni distribution coefficients are greater than one at all natural magmatic temperatures, and (6) the Ni distribution coefficients do not significantly vary as functions of the Ni content of the melt to at least one mole percent.

Leeman, W. P.↗
NASA NTRS1979

Pyroxene-melt equilibria

A thermodynamic analysis of pyroxene-melt equilibria is performed through use of a literature survey of analyses of high-Ca pyroxene and coexisting silicate melt pairs and analyses of low-Ca pyroxene silicate melt pairs. Reference is made to a modified version of a model developed by Bottinga and Weill (1972) which more successfully accounts for variations in melt composition than does a model which considers the melt to be composed of simple oxides which mix ideally. By using a variety of pyroxene melt relations, several pyroxene-melt and low-Ca pyroxene-high-Ca pyroxene geothermometers are developed which have internally consistant precisions of approximately + or - 20 C. Finally, it is noted that these equations may have application in modeling the evolution of mineral compositions during differentiation of basaltic magmas.

Nielsen, R. L.↗
NASA NTRS1979

The olivine-ilmenite thermometer

It is noted that the partitioning of Fe(2+) and Mg between olivine and ilmenite is temperature-dependent and can serve as a geothermometer if the activity-composition relations are determined. The paper reports on the study of the partitioning from 700-980 C at 1 kbar and 800-900 C at 13 kbar, and develops a solution model to account for the nonideality of olivine in the binary system fosterite-fayalite and for ilmenite in the ternary system ilmenite-geikielite-hematite. A comparison with crystallization experiments shows that this thermometer may be safely extrapolated to temperatures higher than those of the exchange experiments.

Andersen, D. J.↗
NASA NTRS1980

Conditions of origin of natural diamonds of peridotite affinity

Studies of mineral inclusions in natural diamonds and rare diamondiferous xenoliths from kimberlites show that most diamonds are associated with a dunite or harzburgite paragenesis. The diamondiferous periodites and dunites have predominantly coarse or tabular textures that suggest low-temperature (less than 1100 C) equilibration. Application of the K(D) Fe/Mg(Ga/Ol) geothermometer of O'Neill and Wood to analytical data for the minerals in these rocks shows that most have equilibrated below 1100 C. Application of this thermometer to pairs of olivine and garnet crystals included in individual diamonds indicates that the diamonds have crystallized in the range 900-1300 C, with a majority of estimated equilibration temperatures falling in the range below 1150 C. Comparison of these estimates of equilibration temperature with the zone of invariant vapor composition solidus for kimberlite and garnet lherzolite determined by Eggler and Wendlandt (1979) suggests that many diamonds may have formed in subsolidus events.

Boyd, F. R.↗
NASA NTRS1984

Evaluation of thermobarometers for garnet peridotites

Twenty-one geothermometers and six geobarometers are evaluated for accuracy and precision for garnet lherzolites, with a suite of well-equilibrated xenoliths from kimberlites of northern Lesotho. Accuracy was tested by comparison of P-T estimates for a diamond-bearing and a graphite-bearing xenolith with the experimentally determined diamond-graphite univariant curve and by comparison of P-T estimates for phlogopite-bearing xenoliths to the high-temperature stability limit of phlogopite. Precision was evaluated by measuring the scatter of P-T estimates for each of four xenoliths from a wide range of P and T when many point analyses of the constituent minerals are used for P-T estimation. Most satisfactory is a thermobarometer composed of the uncorrected diopside-enstatite miscibility gap of Lindsley and Dixon (1976), combined with the uncorrected isopleths for aluminum in enstatite coexisting with pyrope of MacGregor (1974). The inflection observed in the northern Lesotho paleogeotherm cannot be an artifact of the method of temperature estimation.

Finnerty, A. A.↗
NASA NTRS1988

The timing and mechanism of depletion in Lewisian granulites

Large Ion Lithophile (LIL) depletion in Lewisian granulites is discussed. Severe depletions in U, Th, and other LIL have been well documented in Lewisan mafic and felsic gneisses, but new Pb isotopic analyses show little or no depletion in lithologies with high solidus temperatures, such as peridotite. This suggests that LIL transport in this terrane took place by removal of partial melts rather than by pervasive flooding with externally derived CO2. The Pb and Nd isotopic data gathered on these rocks show that the depletion and granulite metamorphism are distinct events about 250 Ma apart. Both fluid inclusions and cation exchange geothermometers date from the later metamorphic event and therefore have little bearing on the depletion event, suggesting a note of caution for interpretations of other granulite terranes.

Cohen, A. S.↗
NASA NTRS1989

Electron Spin Resonance (ESR) studies of returned comet nucleus samples

The most important objective of the Comet Nucleus Sample Returm Mission is to return samples which could reflect formation conditions and evolutionary processes in the early solar nebula. It is expected that the returned samples will consist of fine-grained silicate materials mixed with ices composed of simple molecules such as H2O, NH3, CH4 as well as organics and/or more complex compounds. Because of the exposure to ionizing radiation from cosmic-ray, gamma-ray, and solar wind protons at low temperature, free radicals are expected to be formed and trapped in the solid ice matrices. The kind of trapped radical species together with their concentration and thermal stability can be used as a dosimeter as well as a geothermometer to determine thermal and radiation histories as well as outgassing and other possible alternation effects since the nucleus material was formed. Since free radicals that are known to contain unpaired electrons are all paramagnetic in nature, they can be readily detected and characterized in their native form by the Electron Spin Resonance (ESR) method. In fact, ESR has been shown to be a non-destructive, highly sensitive tool for the detection and characterization of paramagnetic, ferromagnetic, and radiation damage centers in terrestrial and extraterrestrial geological samples. The potential use of ESR as an effective method in the study of returned comet nucleus samples, in particular, in the analysis of fine-grained solid state icy samples is discussed.

Tsay, Fun-Dow↗
NASA NTRS1990

Carbon-rich aggregates in type 3 ordinary chondrites - Characterization, origins, and thermal history

Carbon-rich aggregates from three type 3.4-3.6 ordinary chondrites and two chondritic clasts have been characterized in detail, using TEM techniques. The aggregates in all the meteorites studied range in size from 5-1000 microns and consist of a fine scale intergrowth of poorly graphitized carbon, amorphous carbon, Fe,Ni metal, and minor chromite. Contrary to previous reports, well-crystallized graphite and magnetite are absent. The association of Fe,Ni metal and carbonaceous material suggests that the original carbonaceous material may have formed by Fischer-Tropsch (FT) type reactions at low temperatures (less than 400 K), possibly in the solar nebula. This carbonaceous material probably consisted of a complex mixture of hydrocarbons, kerogen-like material, and other complex organic molecules. The aggregates were subsequently accreted onto the ordinary chondrite parent bodies and underwent planetary thermal processing which resulted in the catalytic graphitization of hydrocarbons, in the presence of Fe,Ni metal, to produce poorly graphitized carbon. None of the meteorites studied experienced temperatures sufficiently high to produce crystalline, ordered graphite. Using the empirical geothermometer of Rietmeijer and Mackinnon (1985), the measured d(002) spacings of poorly graphitized carbon show that graphitization occurred at temperatures between 300 and 450 C. This range of temperatures is significantly lower than the generally quoted metamorphic temperatures for type 3.4-3.6 ordinary chondrites (about 450-500 C).

Brearley, Adrian J.↗
NASA NTRS1990

Oxygen isotope fractionation between analcime and water - An experimental study

The oxygen isotope fractionation between analcime and water is studied to test the feasibility of using zeolites as low-temperature thermometers. The fractionation of oxygen isotopes between natural analcime and water is determined at 300, 350, and 400 C, and at fluid pressures ranging from 1.5 to 5.0 kbar. Also, isotope ratios for the analcime framework, the channel water, and bulk water are obtained. The results suggest that the channel water is depleted in O-18 relative to bulk water by a constant value of about 5 percent, nearly independent of temperature. The analcime-water fractionation curve is presented, showing that the exchange has little effect on grain morphology and does not involve recrystallization. The exchange is faster than any other observed for a silicate. The exchange rates suggest that zeolites in active high-temperature geothermal areas are in oxygen isotopic equilibrium with ambient fluids. It is concluded that calibrated zeolites may be excellent low-temperature oxygen isotope geothermometers.

Karlsson, Haraldur R.↗
NASA NTRS1990

Oxygen and hydrogen isotope geochemistry of zeolites

Oxygen and hydrogen isotope ratios for natural samples of the zeolites analcime, chabazite, clinoptilolite, laumontite, mordenite, and natrolite have been obtained. The zeolite samples were classified into sedimentary, hydrothermal, and igneous groups. The ratios for each species of zeolite are reported. The results are used to discuss the origin of channel water, the role of zeolites in water-rock interaction, and the possibility that a calibrated zeolite could be used as a low-temperature geothermometer.

Karlsson, Haraldur R.↗