Search NASA⌕ Search

SEARCH · Search NASA

Results for “graphite irradiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Chemical Characterization and Removal of C-14 from Irradiated Graphite-12010

Quantities of irradiated graphite waste are expected to drastically increase, which indicates the need for a graphite waste management strategy. Of greatest concern for long-term disposal of irradiated graphite is carbon-14 (C-14), with a half-life of 5730 years. Study of irradiated graphite from nuclear reactors indicates C-14 is concentrated on the outer 5 mm of the graphite structure. The aim of the research described here is to identify the chemical form of C-14 in irradiated graphite and develop a practical method by which C-14 can be removed. Characterization of pre- and post-irradiation graphite was conducted to determine bond type, functional groups, location and concentration of C-14 and its precursors via the use of surface sensitive characterization techniques. Because most surface C-14 originates from neutron activation of nitrogen, an understanding of nitrogen bonding to graphite may lead to a greater understanding of the formation pathway of C-14. However, no single technique provides a complete picture. Therefore, a portfolio of techniques has been developed, with each technique providing another piece to the puzzle that is the chemical nature of the C-14. Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), and Raman Spectroscopy were used to evaluate the morphological features of graphite samples. The concentration, chemical composition, and bonding characteristics of C-14 and its precursors were determined through X-ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (SIMS), and Auger and Energy Dispersive X-ray Analysis Spectroscopy (EDX). High-surface-area graphite foam, POCOFoam{sup R}, was exposed to liquid nitrogen and irradiated. Characterization of this material has shown C-14 to C-12 ratios of 0.035. This information was used to optimize the thermal treatment of graphite. Thermal treatment of irradiated graphite as reported by Fachinger et al. (2007) uses naturally adsorbed oxygen complexes to gasify graphite, thus its effectiveness is highly dependent on the availability of adsorbed oxygen compounds. In research presented, the quantity and form of adsorbed oxygen complexes in pre- and post irradiated graphite was studied using SIMS and XPS. SIMS and XPS detected adsorbed oxygen compounds on both irradiated and unirradiated graphite. During thermal treatment graphite samples are heated in the presence of inert argon gas, which carries off gaseous products released during treatment. Experiments were performed at 900 deg. C and 1400 deg. C to evaluate the selective removal of C-14. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Graphite Oxidation Studies Irradiated Graphite, GIF Summary, ASME Task Force, ASTM Activities

Introduction Comparison of Graphite Oxidation Rates for Irradiated and Unirradiated NBG-25 (Rebecca Smith and Austin Matthews, INL) Annealing effect over range of oxidation temperatures Irradiation effect (~6.5 dpa) over range of oxidation temperatures Dose dependency of irradiation effect Generation IV International Forum High Level Deliverable Summary of DOE ART Historic Oxidation Research (Cristian Contescu, ORNL) Publications issued over the last ~10 years Acute and chronic oxidation ASME Graphite Oxidation Task Force (C. Contescu, Paul Ryan, ORNL, Joe Bass, A. Matthews, R. Smith, INL) Collaborative effort headed by ORNL and engaging INL and others Initial review of relevant oxidation discussion in ASME code ASTM Activities (C. Contescu) Virtual Meetings New and Revised Standards

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Increase in specific heat and possible hindered rotation of interstitial C{sub 2} molecules in neutron-irradiated graphite

Irradiation-induced increase in the low-temperature specific heat has been measured in the temperature range of 1.9-43 K in graphite neutron-irradiated to 1.4x10{sup 20} n/cm{sup 2} (E>1 MeV) around 333 K. The increase of the lattice specific heat is interpreted as due to the hindered rotation of interstitial C{sub 2} molecules in the periodic potential of V(phi)=(V{sub 0}/2)(1+cos 2phi), where phi is the angle of rotation and V{sub 0} is 0.040 eV. The first-excited rotational level is 0.0058 eV above the ground state and the rotational frequency is 1.39x10{sup 12} s{sup -1}. This result shows that C{sub 2} molecules do not form covalent bonds with atoms in the surrounding graphite layers. It is in marked contrast with the result of recent first-principles theoretical calculations that interstitial atoms form strong covalent bonds with atoms in the graphite layers. The concentration of C{sub 2} molecules is estimated to be f=1.16%. The hole concentration, deduced from the electronic specific heat and the SWMcC band model, suggests that one single vacancy creates one hole and the single vacancy concentration is 2f. Since the measurement of the lattice specific heat gave the concentration of the defects directly, we could evaluate some physical properties for a unit concentration of the defects. The volume changes by a single interstitial atom, an interstitial C{sub 2} molecule, and a single vacancy are deduced to be 2.6+-0.3, 9.3+-1.4, and -0.46+-0.07 atomic volumes, respectively. The formation energy of a Frenkel pair is estimated to be 12.6+-2.5 eV. The phonon scattering with a reciprocal relaxation time proportional to omega{sup 1.5}, where omega is the angular frequency of phonons, is attributed to the scattering of phonons by the disklike strain around interstitial C{sub 2} molecule clusters. A broad dip in the a-axis thermal conductivity observed below room temperature is attributed to the resonance scattering of phonons by the hindered rotation of interstitial C{sub 2} molecules as well as by the vibration of these molecules as rigid units. The positron lifetime of 350 ps is suggested to be the lifetime of positrons trapped in an open space on the periphery of the interstitial clusters of C{sub 2} molecules. The well-known Wigner energy is stored mainly as interstitial C{sub 2} molecules and single vacancies.

36 MATERIALS SCIENCE↗

Chemical Characterization and Removal of Carbon-14 from Irradiated Graphite II - 13023

Approximately 250,000 tonnes of irradiated graphite waste exists worldwide and that quantity is expected to increase with decommissioning of Generation II reactors and deployment of Generation IV gas-cooled, graphite moderated reactors. This situation indicates the need for a graphite waste management strategy. Of greatest concern for long-term disposal of irradiated graphite is carbon-14 (C-14), with a half-life of 5730 years. Study of irradiated graphite from some nuclear reactors indicates C-14 is concentrated on the outer 5 mm of the graphite structure. The aim of the research presented last year and updated here is to identify the chemical form of C-14 in irradiated graphite and develop a practical method by which C-14 can be removed. A nuclear-grade graphite, NBG-18, and a high-surface-area graphite foam, POCOFoam{sup R}, were exposed to liquid nitrogen (to increase the quantity of C-14 precursor) and neutron-irradiated (10{sup 13} neutrons/cm{sup 2}/s). Finer grained NBG-25 was not exposed to liquid nitrogen prior to irradiation at a neutron flux on the order of 10{sup 14} /cm{sup 2}/s. Characterization of pre- and post-irradiation graphite was conducted to determine the chemical environment and quantity of C-14 and its precursors via the use of surface sensitive characterization techniques. Scanning Electron Microscopy (SEM) was used to evaluate the morphological features of graphite samples. The concentration, chemical composition, and bonding characteristics of C-14 and its precursors were determined through X-ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (SIMS), and Energy Dispersive X-ray Analysis Spectroscopy (EDX). Results of post-irradiation characterization of these materials indicate a variety of surface functional groups containing carbon, oxygen, nitrogen and hydrogen. During thermal treatment, irradiated graphite samples are heated in the presence of an inert carrier gas (with or without oxidant gas), which carries off gaseous products released during treatment. Graphite gasification occurs via interaction with adsorbed oxygen complexes. Experiments in argon were performed at 900 deg. C and 1400 deg. C to evaluate the selective removal of C-14. Thermal treatment also was performed with the addition of 3 and 5 volume % oxygen at temperatures 700 deg. C and 1400 deg. C. Thermal treatment experiments were evaluated for the effective selective removal of C-14. Lower temperatures and oxygen levels correlated to more efficient C-14 removal. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proton irradiated graphite grades for a long baseline neutrino facility experiment

In search of a low-Z pion production target for the Long Baseline Neutrino Facility (LBNF) of the Deep Underground Neutrino Experiment (DUNE) four graphite grades were irradiated with protons in the energy range of 140–180 MeV, to peak fluence of ~6.1×10 20 p/cm 2 and irradiation temperatures between 120–200 °C. The test array included POCO ZXF-5Q, Toyo-Tanso IG 430, Carbone-Lorraine 2020 and SGL R7650 grades of graphite. Irradiation was performed at the Brookhaven Linear Isotope Producer. Postirradiation analyses were performed with the objective of (a) comparing their response under the postulated irradiation conditions to guide a graphite grade selection for use as a pion target and (b) understanding changes in physical and mechanical properties as well as microstructure that occurred as a result of the achieved fluence and in particular at this low-temperature regime where pion graphite targets are expected to operate. A further goal of the postirradiation evaluation was to establish a proton-neutron correlation damage on graphite that will allow for the use of a wealth of available neutron-based damage data in proton-based studies and applications. Macroscopic postirradiation analyses as well as energy dispersive x-ray diffraction of 200 KeV x rays at the NSLS synchrotron of Brookhaven National Laboratory were employed. The macroscopic analyses revealed differences in the physical and strength properties of the four grades with behavior however under proton irradiation that qualitatively agrees with that reported for graphite under neutrons for the same low temperature regime and in particular the increase of thermal expansion, strength and Young’s modulus. The proton fluence level of ~10 20 cm -2 where strength reaches a maximum before it begins to decrease at higher fluences has been identified and it agrees with neutron-induced changes. X-ray diffraction analyses of the proton irradiated graphite revealed for the first time the similarity in microstructural graphite behavior to that under neutron irradiation and the agreement between the fluence threshold of ~5×10 20 cm -2 where the graphite lattice undergoes a dramatic change. The confirmed similarity in behavior and agreement in threshold fluences for proton and neutron irradiation effects on graphite reported for the first time in this study will enable the safe utilization of the wealth of neutron irradiation data on graphite that extends to much higher fluences and different temperature regimes by the proton accelerator community searching for multi-MW graphite targets.

43 PARTICLE ACCELERATORS↗

Radionuclide stochastic distribution in the irradiated graphite - 15206

In France, about 17,000 tons of irradiated graphite waste will be produced from the decommissioning of the six gas-cooled nuclear reactors operated by Electricite De France (EDF). Radionuclide measurements in irradiated graphite exhibit very high discrepancies especially when corresponding to precursors at trace level which is often the case for nuclear grade graphite. As evidenced by numerous studies nuclear graphite is a very pure material, however, it cannot be considered from an analytical viewpoint as a typical homogeneous material. Geo-statistics do not give any notable results when the 3D neutron flux and power history are known. Without taking into account the very origin of the stochastic behavior of radionuclide, their properties may be assumed with the statistical properties which are used in the case of contaminated soils but which have no interest for irradiated graphite. At every scale, the huge discrepancy cannot be avoided but can be easily explained by Theory Of Sampling (TOS) of finely divided materials. The complexity of nuclear graphite is due to its high purity. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Study of the Annealing Behavior of Neutron Irradiated Graphite

Recycle is being considered as a disposal option for irradiated graphite from gas cooled reactors. Thermal annealing was performed on irradiated graphite samples to establish what fraction of in-crystal (displacement damage) and ex-crystal (pore generation) damage could be recovered. The sample dimensions and electrical resistivity were measured after isochronal annealing at 500, 1000, 1500, and 2000 C. Sample dimensions were unaffected by annealing. Some fraction of the resistivity was unannealable at 2000 C, this behavior which was attributed to (a) structural changes resulting from pore generation (also causing dimensions to be unaffected by annealing), or, (b) defect structures in irradiated graphite that persist even at an annealing temperature of 2000 C. The resistivity annealing behavior was different in low irradiation temperature samples, Tirr<~400 C and high irradiation temperature samples Tirr > ~400 C, which indicated defect structures established during irradiation were different in these two temperature regimes. Moreover, the extent of recovery was much greater in the specimens with higher irradiation temperatures, and was small for lower dose low temperature specimens. Evidently, some in-crystal defects that scatter or trap electrons are still present in the crystal lattice after annealing and their tenacity depends upon the irradiation temperature and accumulated neutron dose.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Innovative Extension of the EDF Inventory Methodology for Irradiated Graphite Sleeves - 16084

About 17,000 t of EDF irradiated graphite wastes will be produced from the decommissioning of the six French gas-cooled nuclear reactors. Determining the radionuclide content of this graphite is of capital importance for safety purposes and in order to determine the best way to manage them. A method using an identification calculation-measurement process has been proposed in order to assess a radiological inventory as precise as possible and has been validated by ANDRA, the French governmental radioactive waste management agency and by IRSN, the technical support of the French nuclear safety authority. As presented at WM2013, this method is based on (a) radionuclide measurements from sufficient samples from a statistical point of view and (b) activation coefficients calculated from the neutron flux histories of the measured samples. For that purpose, it is important to know the precise location of each measured graphite sample, which is easy with pile sampling. About 2,000 t of EDF irradiated graphite is composed of sleeves which contained fuel cartridges and they have been stored in silos of St-Laurent site. The general method needs to know the precise history including neutron flux of any sampled sleeve. As there is no possibility to individually identify sleeves, such a requirement on sleeves in a silo is impossible. The paper presents both the general method for piles and an innovative way to replace that knowledge for long lived radionuclide of irradiated sleeves. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Removal of 14 C from Irradiated Graphite for Graphite Recycle and Waste Volume Reduction

The aim of the research presented here was to identify the chemical form of 14 C in irradiated graphite. A greater understanding of the chemical form of this longest-lived isotope in irradiated graphite will inform not only management of legacy waste, but also development of next generation gas-cooled reactors. Approximately 250,000 metric tons of irradiated graphite waste exists worldwide, with the largest single quantity originating in the Magnox and AGR reactors of UK. The waste quantity is expected to increase with decommissioning of Generation II reactors and deployment of Generation I gas-cooled, graphite moderated reactors. Of greatest concern for long-term disposal of irradiated graphite is carbon-14 14 C, with a half-life of 5730 years.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The New International Project on Irradiated Graphite Processing Approaches (GRAPA) - 16559

Developing of strategies and methods for the management of spent nuclear (irradiated) graphite is one of the major task in decommissioning internationally. More than 250.000 Mg of i-graphite have been accumulated worldwide. Having completed in 2014 a comprehensive collaborative research programme on the treatment options for the disposal of i-graphite wastes to meet disposal criteria, the IAEA decided to maintain an active group of international specialists in this area as part of the International Decommissioning Network (IDN). To foster further development in R and D and steps towards industrial applications in i-graphite management this group was requested to propose the terms of reference and work programme for a new IAEA project. The basic concept for this future programme has been formulated by the German Forschungszentrum (Research Centre) Juelich, Institute IEK-6. The initiative has expanded to include representation from UK, USA, France, Italy, Russia, Ukraine and Lithuania. Additional Member States of the IAEA are expected to join the project. The concept presented by the IEK-6 was discussed among the experts and extended on an international meeting at IAEA in Vienna in February 2015. In addition to the development of the terms of reference a number of individual tasks have been identified. The project will combine a comprehensive state-of-the-art study with concerted actions as well as cross-cutting sub-projects. This will include a practical demonstration of the removal, treatment and disposal of highly-irradiated graphite from a decommissioned reactor. Prior to official implementation of this project preparatory work has been started on topic areas where weaknesses in the scientific knowledge or the technology have been identified. The scope of the international project ('Irradiated Graphite Processing Approaches, GRAPA') and its expected development as well as the possible impact of GRAPA on the future international i-graphite research activities will be described in this presentation. The project will be performed jointly by both the IAEA International Decommissioning Network and the new IAEA Pretreatment Network (IMM, under development). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Treatment of irradiated graphite from French Bugey reactor

In 2008, following the general French plan for nuclear waste management, Electricite de France attempted to find for irradiated graphite an alternative solution to direct storage at the low-activity long-life storage center in France managed by the national agency for wastes (ANDRA). EDF management requested that its engineering arm, EDF CIDEN, study the graphite treatment alternatives to direct storage. In mid-2008, this study revealed the potential advantage for EDF to use a steam reforming process known as Thermal Organic Reduction, 'THOR' (owned by Studsvik, Inc., USA), to treat or destroy the graphite matrix and limit the quantity of secondary waste to be stored. In late 2009, EDF began a test program with Studsvik to determine if the THOR steam reforming process could be used to destroy the graphite. The program also sought to determine if the graphite could be treated to release the bulk of activity while minimizing the gasification of the bulk mass of the graphite. In October 2009, tests with non-irradiated graphite were completed and demonstrated destruction of a graphite matrix by the THOR process at satisfactory rates. After gasifying the graphite, focus shifted to the effect of roasting graphite at high temperatures in inert gases with low concentrations of oxidizing gases to preferentially remove volatile radionuclides while minimizing the graphite mass loss to 5%. A radioactive graphite sleeve was imported from France to the US for these tests. Completed in April 2010, 'Phase I' of testing showed that the process removed >99% of H-3 and 46% of C-14 with <6% mass loss. Completed in September 2011, 'Phase II' testing achieved increased removals as high as 80% C-14. During Phase II, it was also discovered that roasting in a reducing atmosphere helped to limit the oxidation of the graphite. Future work seeks to explore the effects of reducing gases to limit the bulk oxidation of graphite. If the graphite could be decontaminated of long-lived radionuclides up to 95% for C-14 while minimizing mass loss to <5%, this would minimize the volume of any secondary waste streams and potentially lower the waste class of the larger bulk of graphite. Alternatively, if up to 95% decontamination of C-14 is achieved, the graphite may be completely gasified which could result in lower disposal. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Method to Assess the Radionuclide Inventory of Irradiated Graphite from Gas-Cooled Reactors - 13072

About 17,000 t of irradiated graphite waste will be produced from the decommissioning of the six French gas-cooled nuclear reactors. Determining the radionuclide (RN) content of this waste is of relevant importance for safety reasons and in order to determine the best way to manage them. For many reasons the impurity content that gave rise to the RNs in irradiated graphite by neutron activation during operation is not always well known and sometimes actually unknown. So, assessing the RN content by the use of traditional calculation activation, starting from assumed impurity content, leads to a false assessment. Moreover, radiochemical measurements exhibit very wide discrepancies especially on RN corresponding to precursor at the trace level such as natural chlorine corresponding to chlorine 36. This wide discrepancy is unavoidable and is due to very simple reasons. The level of impurity is very low because the uranium fuel used at that very moment was not enriched, so it was a necessity to have very pure nuclear grade graphite and the very low size of radiochemical sample is a simple technical constraint because device size used to get mineralization product for measurement purpose is limited. The assessment of a radionuclide inventory only based on few number of radiochemical measurements lead in most cases, to a gross over or under-estimation that is detrimental for graphite waste management. A method using an identification calculation-measurement process is proposed in order to assess a radiological inventory for disposal sizing purpose as precise as possible while guaranteeing its upper character. This method present a closer approach to the reality of the main phenomenon at the origin of RNs in a reactor, while also incorporating the secondary effects that can alter this result such as RN (or its precursor) release during reactor operation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Approaches to Deal with Irradiated Graphite in Russia - Proposal for New IAEA CRP on Graphite Waste Management - 12364

The problems of spent reactor graphite are being shown, the options of its disposal is considered. Burning method is selected as the most efficient and waste-free. It is made a comparison of amounts of {sup 14}C that entering the environment in a natural way during the operation of nuclear power plants (NPPs) and as a result of the proposed burning of spent reactor graphite. It is shown the possibility of burning graphite with the arrival of {sup 14}C into the atmosphere within the maximum allowable emissions. This paper analyzes the different ways of spent reactor graphite treatment. It is shown the possibility of its reprocessing by burning method in the air flow. It is estimated the effect of this technology to the overall radiation environment and compared its contribution to the general background radiation due to cosmic radiation and NPPs emission. It is estimated the maximum permissible speeds of burning reactor graphite (for example, RBMK graphite) for areas with different conditions of agricultural activities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Remediation of Irradiated Graphite Using Microorganisms Isolated from Oil Contaminated Soil - 19643

The deployment of nuclear energy globally is hindered by the fear cleared by nuclear reactor disasters such as the Chernobyl and Fukushima reactor meltdowns. Additionally, accumulation of radioactive waste globally will, in the near future, present a significant threat to humans and the environment. Notably, the majority of nuclear waste from the energy generation industry is generated as Low Level Waste (LLW) in which the small radioactive component renders the bulk of the waste unsuitable for conventional treatment and disposal. In the case of radioactive graphite, the small radioactive component comprising radiocarbon-14 (C-14) and metallic pollutants can be removed to allow safe disposal or reuse as of the graphite. In the current study, mixed-cultures of organisms isolated from oil contaminated sites showed potential of selective bioaccumulation of C-14 from a powdered C-12/C-14 graphite matrix. The study was conducted in a continuously mixed reactor (growth vessel) constructed from Pyrex panels (30 cm x 20 cm x 15 cm) with finely ground graphite as the principal carbon source (1500-2000 mg.L{sup -1}) and spikes of glucose (500 mg.L{sup -1} every 48 hours). The growth vessel was connected to a biofilter unit by submersible pump where particulate matter was isolated for further analysis. Results showed that approximately 68% more C-14 was released from ignited dry cells than from respiration product. C-14 accumulated in cells corrected using a trap filter system, with a marked decrease of C-14 in carbon dioxide than vegetative suspended cells in the main tank. The only mechanism that could account for the differential C-14 distribution between the liquid medium and cells was possible fractionation during uptake of carbon compounds. The discriminating factor suggested in this study is the kinetic isotope effect (KIE) which allows heavier atoms to have different affinities for reaction sites on catalysis and biocatalysis. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Production of an impermeable composite of irradiated graphite and glass by hot isostatic pressing as a long term leach resistant waste form

Around 250,000 tons of irradiated graphite (i-graphite) exists worldwide and can be considered as a current waste or future waste stream. The largest national i-graphite inventory is located in UK (∼ 100,000 tons) with significant quantities also in Russia and France [5]. Most of the i-graphite remains in the cores of shutdown nuclear reactors including the MAGNOX type in UK and the UNGG in France. Whilst there are still operational power reactors with graphite cores, such as the Russian RBMKs and the AGRs in UK, all of them will reach their end of life during the next two decades. The most common reference waste management option of i-graphite is a wet or dry retrieval of the graphite blocks from the reactor core and the grouting of these blocks in a container without further conditioning. This produces large waste package volumes because the encapsulation capacity of the grout is limited and large cavities in the graphite blocks could reduce the packing densities. Packing densities from 0.5 to 1 tons per cubic meter have been assumed for grouting solutions. Furthermore the grout is permeable. This could over time allow the penetration of aqueous phases into the waste block and a potential dissolution and release of radionuclides. As a result particularly highly soluble radionuclides may not be retained by the grout. Vitrification could present an alternative, however a similar waste package volume increase may be expected since the encapsulation capacity of glass is potentially similar to or worse than that of grout. FNAG has developed a process for the production of a graphite-glass composite material called Impermeable Graphite Matrix (IGM) [3]. This process is also applicable to irradiated graphite which allows the manufacturing of an impermeable material without volume increase. Crushed i-graphite is mixed with 20 vol.% of glass and then pressed under vacuum at an elevated temperature in an axial hot vacuum press (HVP). The obtained product has zero or negligible porosity and a water impermeable structure. Structural analysis shows that the glass in the composite has replaced the pores in the graphite structure. The typical pore volume of a graphite material is in the range of 20 vol.%. Therefore no volume increase will occur in comparison with the former graphite material. This IGM material will allow the encapsulation of graphite with package densities larger than 1.5 ton per cubic meter. Therefore a huge volume saving can be achieved by such an alternative encapsulation method. Disposal performance is also enhanced since little or no leaching of radionuclides is observed due to the impermeability of the material NNL and FNAG have proved that IGM can be produced by hot isostatic pressing (HIP) which has several advantages for radioactive materials over the HVP process. - The sealed HIP container avoids the release of any radionuclides. - The outside of the waste package is not contaminated. - The HIP process time is shorter than the HVP process time. The isostatic press avoids anisotropic density distributions. - Simple filling of the HIP container has advantages over the filling of an axial die. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Review of Graphite Irradiation Creep Data from the "OC-Series" of Experiments

The OC-Series graphite irradiation creep experiments were conducted in the early 1970s in the Oak Ridge Research Reactor (ORR) at ORNL. The OC Series consisted of 5 experiments, Capsules 1, 3 and 5 were irradiated at 900°C and Capsules 2 and 4 were irradiated at 600°C. Each capsule contained four columns of specimens, two loaded in compression and two un-loaded. The loaded columns had specimens of different diameter to generate two stress levels, 13.8 MPa and 20.7 MPa. Some of the data from these experiments were presented in extended abstracts at a Carbon Conference (Kennedy et al, 1977: Kennedy and Eatherly, 1979). The data presented some challenges to the accepted approach to irradiation induced creep in graphite adopted in the UK, specifically lateral creep strain behaviour and the effect of irradiation induced creep strain on material properties, e.g. CTE and Poisson’s Ratio. A recent review of irradiation induced creep (Davies & Bradford, 2004) included an analysis of the available OC-series data (Mobasheran, 1990) and led to a request to ORNL for an examination of the original OC-Series dataset. An initial search of the ORNL archive revealed additional data from the OC-Series experiment including previously unknown irradiation annealing experiments. This report presents a re-analysis of the available data from the OC-Series archive.

36 MATERIALS SCIENCE↗