Search NASA⌕ Search

SEARCH · Search NASA

Results for “grassy ELM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Characteristics of grassy ELMs and their impact on the divertor heat flux width

We report BOUT++ turbulence simulations are conducted for a 60 s steady-state long pulse high β p EAST grassy ELM discharge. BOUT++ linear simulations show that the unstable mode spectrum covers a range of toroidal mode numbers from low-n (n = 10–15) peeling–ballooning modes (P–B) to high-n (n = 40–80) drift-Alfvén instabilities. Nonlinear simulations show that the ELM crash is triggered by low-n peeling modes and fluctuation is generated at the peak pressure gradient position and radially spread outward into the scrape-off-layer, even though the drift-Alfvén instabilities dominate the linear growth phase. However, drift-Alfvén turbulence delays the onset of the grassy ELM and enhances the energy loss with the fluctuation extending to pedestal top region. Simulations further show that if the peeling drive is removed, the fluctuation amplitude drops by an order of magnitude and the ELM crashes disappear. The divertor heat flux width is ~2 times larger than the estimates based on the HD model and the Eich's ITPA multi-tokamak scaling (or empirical Eich scaling) due to the strong radial turbulence transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Turbulence simulations of drift-Alfvén wave effects on edge-localized modes and divertor target heat flux width

A series of BOUT++ turbulence simulations are performed for two Pre-Fusion Power Operation (PFPO-1,2) phases of the ITER Research plan proclaimed in 2019. Linear simulation results show that PFPO-1 is unstable to Peeling-ballooning modes (PB), while the PFPO-2 is unstable to the coupling of PB and Drift-Alfvén wave (DAW) instabilities. The linear results are qualitatively consistent with the dispersion relation of DAW. To study the influence of the DAW on the edge-localized mode (ELM) crash, the PFPO-2 is adopted in this section. Different from the grassy ELM in [Li et al 2022 Nucl. Fusion 62, 096030], nonlinear simulations show that the ELM size of PFPO-2 is almost one-third of the grassy ELM, representing a distinct small ELM. However, simulations then show that if the PB instability is removed, the fluctuation amplitude drops by an order of magnitude and the ELM crash disappears, which is in accord with the theory in [Xu et al 2010 Physical Review Letters, Vol. 105, 175005] and the results in [Li et al 2022 Nucl. Fusion 62, 096030], confirming that the PB instability is a necessary condition for an ELM crash. Furthermore, removing the DAW drive also suppresses ELM crashes, implying that PB instability is necessary but insufficient for PFPO-2 ELM and that DAW could amplify PB-driven turbulence. In addition, by integrating results of both PFPO phases by BOUT++ turbulence analysis with heat flux width (λ q ) and electron thermal diffusivity (χ e ), these simulations establish a predictive framework for heat flux width and its dominant mechanisms, thereby providing a comprehensive scheme for the prediction of the heat flux width. Moreover, simulations indicate that DAW driving can increase the transport coefficient by enhancing the turbulent transport, leading to a broadened heat flux width once the transport coefficient exceeds

Drift-Alfvén wave↗
DOE OSTI2022

Quantifying heat and particle flux to primary and secondary divertors for various types of edge-localized-modes

Between 15% and 30% of edge-localized-mode (ELM) heat flux can be deposited to regions outside the main divertor including the far scrape-off-layer (SOL), private flux region (PFR), and secondary divertor inner target. Analysis shown here demonstrates that type-I and small ELM plasmas are transported to the PFR and to the secondary inner divertor, which is magnetically isolated from the outer divertor, leading to well-defined heat flux profiles and with peak values that can surpass those at the secondary outer target. Such features are consistently observed for pedestal collisionalities from $ν$$^{*}_{e}$ ~1.5 to $ν$$^{*}_{e}$ ~3.9. Heat flux profiles of the examined ELM types feature rippled structures due to bursts in the outer far-SOL region but not on the secondary inner target, causing long decay lengths in the time-averaged ELM profiles. The contribution of each ELM type to the total time-averaged power deposited to the secondary divertor has been evaluated, showing that grassy ELMs contribute ~8%, small ELMs ~67%, and type-I ELMs ~85%. These findings imply that small ELMs may yet pose a concern for future machines if some regions of the main wall are not designed to withstand significant heat and particle fluxes. Due to the low intra-ELM heat flux contribution, however, the grassy ELM regime is an attractive option for an ELMing scenario in future machines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Using convolutional neural networks to detect edge localized modes in DIII-D from Doppler backscattering measurements

In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs, and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods—deuterium-alpha (D α ) spectroscopy and Doppler backscattering (DBS). The former detects ELMs by measuring Balmer alpha emission, while the latter uses microwave radiation to probe the plasma. DBS has the advantages of having a higher temporal resolution and robustness to damage. These advantages of DBS diagnostic may be beneficial for future operational tokamaks, and thus, data processing techniques for DBS should be developed in preparation. In sight of this, we explore the training of neural networks to detect ELMs from DBS data, using D α data as the ground truth. With shots found in the DIII-D database, the model is trained to classify each time step based on the occurrence of an ELM event. The results are promising. When tested on shots similar to those used for training, the model is capable of consistently achieving a high f1-score of 0.93. Furthermore, this score is a performance metric for imbalanced datasets that ranges between 0 and 1. We evaluate the performance of our neural network on a variety of ELMs in different high confinement regimes (grassy ELM, RMP mitigated, and wide-pedestal), finding broad applicability. Beyond ELMs, our work demonstrates the wider feasibility of applying neural networks to data from DBS diagnostic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Edge-localized-mode simulation in CFETR steady-state scenario

We report the EPED1 model and self-consistent core-pedestal coupling in integrated modeling are used to design the pedestal structure of the China Fusion Engineering Testing Reactor (CFETR) steady-state scenario. The key parameters, such as β p and q 95 , are based on the grassy edge-localized-mode (ELM) experimental database. In this work, we use the BOUT++ six-field two-fluid code to simulate the onset of the ELM in the CFETR steady-state scenario. The ELM size is around 0.2% in nonlinear simulations, which is in the experimental range of the grassy ELM discharges, 0.1%–1% observed in multiple tokamak devices. Linear and nonlinear simulations show that the dominant high-n ballooning modes peak around n = 40. Compared to type-I ELM crashing dynamics, grassy ELM crashing has a smaller initial crash and is then followed by three phases of turbulence spreading, which are dominated by multi-modes, a high-n mode of n = 45 and low-n mode of n = 5, respectively. In contras to type-I ELM, the perturbation of the high-n mode has a narrow width around ψ = 0.95, and magnetic island formation and reconnection occur only beyond ψ = 0.95, leading to a small initial crash. Mode–mode interaction in the multi-mode coexistence stage stops the growth of individual modes and reduces the transport of particles and heat, and these are the two reasons why the ELM size is small. In–out asymmetry of transient heat flux with a ratio of E out /E in = 3.5 is found during grassy ELM crash. The rise and delay times of the heat flux match the calculation from the free-streaming model. To evaluate the erosion of the divertor target, the energy fluence at the outer divertor target is calculated, which is 0.029 MJ m -2 , 5.5 times smaller than the tungsten melting limit 0.16 MJ m -2 . The calculated energy fluency still follows the experimental scaling law from type-I ELM experiments. The fluctuation eddies in the toroidal direction show a filament structure at the outer mid-plane. Parallel heat flux patterns with a toroidal mode number n = 10 are found at the outer divertor with an amplitude of 680 MW m -2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Access and limits of RMP ELM suppression with n = 1 fields in DIII-D

This work reports on DIII-D experiments aimed at extending resonant magnetic perturbation (RMP) suppression of edge localized modes (ELMs) to n = 1 fields, where n is the toroidal mode number. Modeling of the 3D ideal MHD plasma response to the RMPs using the GPEC code is used to quantify edge and core resonant fluxes, guiding experimental strategies to increase plasma resilience against core error field penetration, optimize multicoil phasing, and explore higher q 95 operation. In DIII-D, ELM mitigation is regularly observed across a wide range of n = 1 RMP scenarios. A ∼100 ms phase of complete ELM suppression was achieved at q 95 ∼ 3.9 using an odd-parity coil configuration. The suppressed phase exhibited clear signatures of RMP ELM suppression, including the elimination of Dα spikes, increased pedestal rotation, enhanced magnetic response, and elevated broadband density turbulence. An optimized coil configuration for edge-to-core resonant flux did show increased edge resonance indicated by increased density pumpout, but did not yield RMP ELM suppression. At q 95 ∼ 5.1, a bifurcation to a grassy-like ELM regime occurred, while large type-I ELMs persisted. These results demonstrate progress in experimental access to n = 1 RMP ELM suppression in DIII-D, motivating further study for robust access. This work also highlights the potential role of 3D edge stability as well as rational surface alignment in RMP ELM suppression access, which has important implications for the use of low-n RMPs in future reactor-scale devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Effects of radial transport on divertor power and particle flux widths under different operational regimes in EAST

Here, a study of the effects of radial transport on the outer divertor particle and power flux widths (λ js and λ q ) is carried out using plasmas under different operational regimes in the Experimental Advanced Superconducting Tokamak (EAST). In the EAST experiments, the λ js values measured during the grassy intra- and inter-ELM phases are similar, and the averaged value of λ js during grassy ELMy discharges is found to be smaller than that of the intra-ELM phase of type-I ELMy discharges but larger than that of the inter-ELM phase of type-I ELMy discharges. Simulations of scans of the radial particle and heat transport coefficients, D and χ e , performed using the BOUT++ transport code show that both λq and λjs increase with D and χe, especially when D or χ e is larger than a threshold value, indicating that background turbulence starts to matter in the determination of λ q and λ js when D or χ e surpasses the threshold value. A comparison between the simulation of the D scan and the experimental results shows that the different values of λ js obtained under different plasma operational regimes are probably due to the different intensities of background turbulence, which is beyond the scope of Goldston's heuristic drift-based model as reported by Goldston et al (2012 Nucl. Fusion 52 013009), since their model was derived by assuming that turbulent transport does not exceed a certain level. The ratio of λ js to λ q is greatly affected by the radial transport; however, simulations carried out using Scrape-off Layer Plasma Simulation (SOLPS) show that divertor geometry and plasma density have big influences on λ js , and thus could also affect the ratio of λ js to λ q .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Investigation of performance enhancement by balanced double-null shaping in KSTAR

We report experimental observations on the effect of plasma boundary shaping towards balanced double-null (DN) configuration on the plasma performance in KSTAR. The transition from a single-null to a DN configuration resulted in improved plasma performance, manifested through changes in the pedestal region, decreased density, and core MHD activity variation. Specifically, the DN transition led to a wider and higher pedestal structure, accompanied by grassy edge-localized modes (ELMs) characteristics. The density decrease was a prerequisite for performance enhancement during DN shaping, increasing fast ion confinement. Optimizing the plasma near the core region was associated with the suppression of sawtooth instabilities and the occurrence of fishbone modes during the DN transition. Integrated modeling demonstrated that secondary effects of the DN shaping could increase core thermal energy confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗