SEARCH · Search NASA

Results for “gravitational settling velocity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

16 records

All sources NASA NTRS DOE OSTI

NASA NTRS2026

Modeling Large Dust Aerosols in the Community Earth System Model Version 2 (CESM2)

Dust aerosols have a wide size distribution from less than 0.1 to over 100 μm and dominate Earth's atmospheric aerosol mass. However, most Earth system models (ESMs) inadequately represent dust aerosols larger than 10 μm in diameter, limiting the accuracy of the simulated dust cycle and climate impacts. Here, we introduce a new modeling framework that captures the full observed size distribution of dust aerosols, incorporating recent advances into a mineral-resolved version of the Community ESM, while addressing known issues in previous versions. Comprehensive evaluation against diverse observations of bulk dust and component minerals demonstrates that the model reproduces the observed dust cycle across particle sizes. Incorporating the previously unrepresented large-dust fractions substantially alters dust budget estimates, highlighting potential changes in simulated climate impacts and underscoring the importance of comprehensive size-resolved dust modeling. Despite these advancements, uncertainties persist. Our results indicate that a size-dependent reduction in settling velocity is required to reproduce the observed dust size distribution downwind of source regions. Specifically, in the new model, the gravitational settling velocity of dust particles larger than 10 μm in diameter must be reduced by as much as 85% to achieve agreement with observations. This empirical reduction serves as a constraint on physics-based models of dust settling. Future developments should address misrepresented physical processes that hinder accurate modeling of the large dust aerosol transport. Expanding observational data sets covering the full-size distribution is also essential to better constrain the dust cycle and improve the representation of dust optical properties and climate effects.

mineral dust↗

NASA NTRS1999

Laminar Dust Flames: A Program of Microgravity and Ground Based Studies at McGill

Fundamental knowledge of heterogeneous combustion mechanisms is required to improve utilization of solid fuels (e.g. coal), safe handling of combustible dusts in industry, and solid propulsion systems. The objective of the McGill University research program on dust combustion is to obtain a reliable set of data on basic combustion parameters for dust suspensions (i.e. laminar burning velocity, flame structure, quenching distance, flammability limits, etc.) over a range of particle sizes, dust concentrations, and types of fuel. This set of data then permits theoretical models to be validated and, when necessary, new models to be developed to describe the detailed reaction mechanisms and transport processes. Microgravity is essential to the generation of a uniform dust suspension of arbitrary particle size and concentration. When particles with a characteristic size on the order of tens of microns are suspended, they rapidly settle in a gravitational field. To maintain a particulate in suspension for time duration adequate to carry out combustion experiments invariably requires continuous convective flow in excess of the gravitational settling velocity (which is comparable with and can even exceed the dust laminar burning velocity). This makes the experiments turbulent in nature and thus renders it impossible to study laminar dust flames. Even for small particle sizes on the order of microns, a stable laminar dust flow can be maintained only for relatively low dust concentrations at normal gravity conditions. High dust loading leads to gravitational instability of the dust cloud and to the formation of recirculation cells in the dust suspension in a confined volume, or to the rapid sedimentation of the dense dust cloud, as a whole, in an unconfined volume. Many important solid fuels such as carbon and boron also have low laminar flame speeds (of the order of several centimeters per second). Convection that occurs in combustion products due to buoyancy disrupts the low speed dust flames and makes observation of such flames at normal gravity difficult.

Goroshin, Sam↗

NASA NTRS1995

Microgravity combustion of dust clouds: Quenching distance measurements

The current level of physical understanding of dust combustion phenomena is still in a rudimentary state compared with the understanding of gas combustion processes. The reason for such a lack of fundamental understanding is partially based on the complexity of multiphase combustion and the enormous diversity of chemical-physical properties of heterogeneous combustible mixtures but is largely due to difficulties in the experimental investigation of dust combustion. The influence of gravity on a dust suspension is the main reason. First of all, when particulates (either solid particles or liquid droplets) with a characteristic size of the order of tens of microns are suspended, they rapidly settle in the gravitational field. To maintain a particulate suspension for a time duration adequate to carry out combustion experiments invariably requires continuous convection of particulates at or in excess of the gravitational settling velocity. Of necessity, this makes the experiments turbulent in character and makes it impossible to study laminar dust flames. For particle sizes of the order of microns a stable laminar dust flow can be maintained only for relatively small dust concentrations (e.g., for low fuel equivalence ratios) at normal gravity conditions. High dust loading leads to gravitational instability of the dust cloud and to the formation of recirculation cells in a dust suspension in a confined volume, or to the rapid sedimentation of the dense dust cloud as a whole in an unconfined volume. In addition, many important solid fuels such as low volatile coal, carbon, and boron have low laminar flame speeds (of the order of several centimeters per second). Gravitational convection that occurs in combustion products due to the buoyancy forces disrupts low speed dust flames and, therefore, makes observation of such flames at normal gravity impossible. The only way to carry out 'clean' fundamental experiments in dust combustion over a wide range of dust cloud parameters is in a gravity-free environment. Access to the microgravity environment provided by the use of large-scale drop towers, parabolic flights of aircraft and rockets, and shuttle and space station orbits has permitted now to proceed with a systematic program of dust combustion microgravity research. For example, the NASA-Lewis drop tower and a Lear jet parabolic flight aircraft were used by Ross et al. and by Berlad and Tangirala for experiments with Iycopodium/air mixtures. The Japan Microgravity Center drop shaft (JAMIC) where a microgravity condition of 10(exp -4) g for 10 s is available, was recently used by Kobayashi, Niioka et al. for measuring flame propagation velocities in polymethyl methacrylate dust/air suspensions. Microgravity dust combustion experiments were started at McGill University in the early 90's under the sponsorship of the Canadian Space Agency. Several generations of dust combustion platforms permitting dust combustion microgravity experiments to be carried out on board a parabolic flight aircraft (KC-135, NASA) have been designed and tested. The experimental data and experience gained from this research allowed us to design and build in a current phase of this program the microgravity apparatus for the visual observation of freely propagating constant pressure laminar dust flames. Quenching distances in aluminum dust suspensions have been measured in a wide range of dust cloud parameters in ground-based experiments and in recent microgravity experiments (KC-135 parabolic flights, Houston, February 1995).

Goroshin, S.↗

NASA NTRS2022

Analysis and Impact of the Hunga Tonga-Hunga Ha’apai Stratospheric Water Vapor Plume

On Jan. 15, 2022, the Hunga Tonga-Hunga Ha’apai eruption injected SO2 and H2O into the 31 middle stratosphere. The eruption produced a persistent mid-stratospheric sulfate aerosol and H2O layer mostly confined to Southern Hemisphere (SH) tropics (Eq. to 30°S). These layers are still present in the tropics 5 ½ months after the eruption. The SH tropical confinement is simulated using a trajectory model. Measurements following the eruption show that the H2O layer is slowly rising while the aerosol layer is descending. The H2O layer’s upward movement is consistent with the residual vertical velocity. Gravitationally settling explains the descent of the aerosol layer. A -4K temperature anomaly coincident with the H2O enhancement is observed and is caused by thermal adjustment to the additional H2O IR cooling. A simple model of volcanic water injection at the time of the eruption simulates the observed vertical distribution H2O.

Atmospheric science↗

NASA NTRS2022

Importance of Different Parameterization Changes for the Updated Dust Cycle Modeling in the Community Atmosphere Model (Version 6.1)

The Community Atmosphere Model (CAM6.1), the atmospheric component of the Community Earth System Model (CESM; version 2.1), simulates the life cycle (emission, transport, and deposition) of mineral dust and its interactions with physio-chemical components to quantify the impacts of dust on climate and the Earth system. The accuracy of such quantifications relies on how well dust-related processes are represented in the model. Here we update the parameterizations for the dust module, including those on the dust emission scheme, the aerosol dry deposition scheme, the size distribution of transported dust, and the treatment of dust particle shape. Multiple simulations were undertaken to evaluate the model performance against diverse observations, and to understand how each update alters the modeled dust cycle and the simulated dust direct radiative effect. The model–observation comparisons suggest that substantially improved model representations of the dust cycle are achieved primarily through the new more physically-based dust emission scheme. In comparison, the other modifications induced small changes to the modeled dust cycle and model–observation comparisons, except the size distribution of dust in the coarse mode, which can be even more influential than that of replacing the dust emission scheme. We highlight which changes introduced here are important for which regions, shedding light on further dust model developments required for more accurately estimating interactions between dust and climate.

mineral dust parameterizations↗

NASA NTRS1978

Induced velocities of grains embedded in a turbulent gas

A theory is presented for the dynamics of dust particles in an incompressible turbulent fluid. Grain-gas coupling occurs through friction forces that are proportional to the mean grain velocity relative to the gas. This test particle theory is applied to the case of Kolmogoroff spectrum in a protostellar cloud. The mean turbulence induced grain velocity and the mean turbulent relative velocity of two grains are calculated. Whereas the former should determine the dust scale height, grain-grain collisions are influenced by the latter. For a reasonable strength of turbulence, the mean induced relative velocity of two particles turns out to be at least as large as the corresponding terminal velocity difference during gravitational settling.

Voelk, H. J.↗

NASA NTRS2001

Effective Gravitational Temperature in Sedimentation

Particle Image Velocimetry (PIV) is used to study the slow settling motions of spheres in suspensions ranging from dilute to highly concentrated, 0.05 less than phi less than 0.50. During sedimentation, velocity fluctuations are found to be organized into regions of characteristic size L approximately 11 a phi(exp-1/3) and buoyant mass DELTA m given by the rms density fluctuations in a region of size L(sup 3) assuming random statistics with excluded volume effects. A simple model accurately predicts the magnitudes of the velocity fluctuations DELTA V. Finally, we find a new universal relation for particle diffusion during sedimentation that can be written in a Stokes-Einstein type form as D approximately (DELTA mg L)/(6 pi eta L), where the effective temperature DELTA mg L is the gravitational potential energy of density fluctuations.

Segre, Philip N.↗

NASA NTRS2002

Effective Gravitational Temperature in Sedimentation

Particle Image Velocimetry (PIV) is used to study the slow settling motions of spheres in suspensions ranging from dilute to highly concentrated, 0.0001 less than phi less than 0.50. During sedimentation, particle velocity fluctuations are found to be organized into regions of characteristic size xi approx. parallel to (alpha)phi(sup -1/3). A simple model, based upon buoyant mass fluctuations (Delta)m given by random density fluctuations in a region of size xi, accurately predicts the magnitudes of the velocity fluctuations (Delta)V. We also find a new universal relation for particle diffusion during sedimentation. It can be written in a Stokes-Einstein form as D approx. (Delta m g xi)/(6pi eta xi), where the effective temperature Delta m g xi is the gravitational potential energy of density fluctuations. In addition related experiments examining inertial effects and transient states, that are aimed at uncovering the origin of the new length-scale xi, will also be given.

Segre, Philip N.↗

NASA NTRS2000

Correlations and Gravitational Temperature in Settling Suspensions

Particle Image Velocimetry (PIV) is used to study the slow settling motions of spheres in suspensions ranging from dilute to highly concentrated, 0.05 less than phi less than 0.50. During sedimentation, velocity fluctuations are found to be organized into regions of characteristic size L approximately equal to 11 a phi(exp -1/3) and buoyant mass DELTA m given by the rms density fluctuations in a region of size L(exp 3) assuming random statistics. A simple model incorporating the suspension viscosity and excluded volume effects accurately predicts the magnitudes of the observed velocity fluctuations DELTA V. These lead to a universal relation for particle diffusion that can be written in a Stokes-Einstein type form as D approximately equal to (DELTA m gL)/(6 pi (eta)L).

Segre, Philip N.↗

NASA NTRS1993

Collective effects of temperature gradients and gravity on droplet coalescence

The interaction and coalescence of small spherical drops in dilute, homogeneous dispersions are considered theoretically under conditions, where drop motion results from gravity settling and thermocapillary migration acting simultaneously. A trajectory analysis is used to predict pairwise collision rates, and population dynamics equations are solved to predict the time evolution of the droplet size distribution. The rate of droplet collisions and growth may be reduced dramatically by antiparallel alignment of the gravitational and thermocapillary velocities. For such antiparallel alignment with the gravitational relative velocity exceeding the thermocapillary relative velocity for two widely separated drops, there is a 'collision-forbidden region' in parameter space. This occurs because the gravitational relative velocity decays more rapidly with decreasing separation distance between the drops than does the thermocapillary relative velocity, and so the resultant relative velocity along the line-of-centers from these two sources combined becomes zero at a finite separation and the drops are unable to collide. As a result, small drops which initially collide and coalesce due to thermocapillary motion will only grow until they reach a critical size for which the oppositely directed gravitational motion balances the thermocapillary motion.

Zhang, Xiaoguang↗

NASA NTRS2023

Can the Streaming Instability Form the First Planetesimals in Globally Turbulent Protoplanetary Disks?

Understanding the formation of the first planetesimals remains key to deciphering the history of planet formation within our own solar system and beyond. Evidence from the vast meteorite record [e.g., 1] as well as observations [e.g., 2] strongly suggest that the first planetesimals, and perhaps giant planet core accretion occurred well within the first million years of disk evolution. Moreover, chemical and lithological mixing as well as observations of line-broadening in protoplanetary disks (PPDs) [e.g., 3-6] suggest that the solar system nebula in this epoch was weakly-to-moderately turbulent in the regions where particle growth is of the greatest interest [7-8]. It is a well-known though that global hydrodynamic turbulence complicates particle growth due to a slew of barriers that can slow or even stall particle or aggregate growth at pebble sizes (with corresponding small particle Stokes numbers St) that can lead to loss to the central star via radial drift before planetesimals can ever form [9,10], requiring that some other mechanism come into play that collects growth-frustrated pebbles into gravitationally bound multi-km bodies – objects that are “born big” [11]. The current leading candidate for such a “leap-frog” mechanism is the so-called Streaming Instability (SI), a gas-drag mediated momentum exchange resonance in which the relative velocity between the particle component and a rotating gaseous fluid can lead to high densities in the particle field [12], which has been invoked in a number of recent PPD models that include a turbulent intensity α [e.g., 13-14] as the defacto mechanism for planetesimal formation if conditions for the SI (depending on particle St and the solids-to-gas mass ratio) are satisfied. However, these previous works use conditions established from occurrence studies for the onset of SI in laminar disks [15-17] in which the only source of turbulence is that self-generated by the settling particle layer, and not externally driven global turbulence. Recent analytical theories of the SI subject to global turbulence predict much more stringent conditions for the effectiveness of the SI than the laminar case [18-19]. Thus, whether the efficient operation of the SI can be attained in realistic models of the solar nebula have yet to be established. In this work, we ask whether the conditions under which the SI can produce gravitationally bound particle overdensities can actually be met in the first million years of evolution in globally turbulent PPDs.

P R Estrada↗

NASA NTRS2003

Origin of Stability in Particle Sedimentation

Particle Image Velocimetry (PIV) is used to study the slow settling motions of spheres in suspensions ranging from dilute to highly concentrated, 0.0001 less than phi less than 0.50. During sedimentation, particle velocity fluctuations are found to be organized into regions of characteristic size xi approximately 11 a phi (exp -1/3). A simple model, based upon buoyant mass fluctuations DELTAm given by random density fluctuations in a region of size xi, accurately predicts the magnitudes of the velocity fluctuations DELTAV. We also find a new universal relation for particle diffusion during sedimentation. It can be written in a Stokes-Einstein form as Dapproximately(DELTAmxi)/(6pietaxi), where the effective temperature DELTAmgxi is the gravitational potential energy of density fluctuations. In addition related experiments examining inertial effects and transient states, that are aimed at uncovering the origin of the new lengthscale xi, will also be given.

Segre, Philip N.↗

NASA NTRS1997

The Growth of Planets From Planetesimals

Modern theories of star and planet formation, which are based upon observations of the Solar System and of young stars and their environments, state that planets grow from circumstellar disks of gas and dust. Interstellar dust and/or disk condensates settle towards the midplane of the disk and agglomerate into kilometer-sized solid bodies known as planetesimals. These planetesimals then interact with one another via gravitational forces and collisions. Terrestrial planets are believed to grow via pairwise accretion until the spacing of planetary orbits becomes large enough that the configuration is stable for the age of the system. Giant planets begin their growth in the same manner as do terrestrial planets, but they become -massive enough that they are able to accumulate substantial amounts of gas before the protoplanetary disk dissipates. Models for the formation of our Solar System and of the giant planets found in recent radial velocity searches are discussed.

Lissauer, Jack J.↗

NASA NTRS1978

Free collapse of a rotating sphere of stars

The free-fall collapse of a system of 115,000 stars was studied by means of a three-dimensional simulation on the ILLIAC IV computer. The system started from a spherical shape with uniform density and rigid rotation which balanced the gravitational force in the equatorial plane. The system settled down into a 'hot' prolate 'bar' in about two initial rotation periods. This bar rotates about a short axis and is a long-lived form. Detailed discussion of the development of this system leads to several important dynamical inferences: (1) the first collapse does not become triaxial, and the prolate form follows much later; (2) forms seen in projection along the rotation axis are strikingly similar to forms seen in disk galaxy simulations, notwithstanding an unusual thickness along the rotation axis (this strengthens confidence in disk galaxy simulations); (3) many elliptical galaxies must be prolate objects rotating about a short axis and seen in projection; and (4) collapse models of galaxy formation lead to strongly anisotropic velocity dispersions, which are not in agreement with observation.

Miller, R. H.↗

NASA NTRS2015

Development of Test Protocols for International Space Station Particulate Filters

Air quality control on the International Space Station (ISS) is a vital requirement for maintaining a clean environment for the crew and the hardware. This becomes a serious challenge in pressurized space compartments since no outside air ventilation is possible, and a larger particulate load is imposed on the filtration system due to lack of gravitational settling. The ISS Environmental Control and Life Support System (ECLSS) uses a filtration system that has been in use for over 14 years and has proven to meet this challenge. The heart of this system is a traditional High-Efficiency Particulate Air (HEPA) filter configured to interface with the rest of the life support elements and provide effective cabin filtration. The filter element for this system has a non-standard cross-section with a length-to-width ratio (LW) of 6.6. A filter test setup was designed and built to meet industry testing standards. A CFD analysis was performed to initially determine the optimal duct geometry and flow configuration. Both a screen and flow straighter were added to the test duct design to improve flow uniformity and face velocity profiles were subsequently measured to confirm. Flow quality and aerosol mixing assessments show that the duct flow is satisfactory for the intended leak testing. Preliminary leak testing was performed on two different ISS filters, one with known perforations and one with limited use, and results confirmed that the testing methods and photometer instrument are sensitive enough to detect and locate compromised sections of an ISS BFE.Given the engineering constraints in designing spacecraft life support systems, it is anticipated that non-industry standard filters will be required in future designs. This work is focused on developing test protocols for testing the ISS BFE filters, but the methodology is general enough to be extended to other present and future spacecraft filters. These techniques for characterizing the test duct and perform leak testing can be applied to conducting acceptance testing and inventory testing for future manned exploration programs with air revitalization filtration needs, possibly even for in-situ filter element integrity testing for extensively long-duration missions. We plan to address the unique needs for test protocols for crewed spacecraft particulate filters by preparing the initial version of a standard, to be documented as a NASA Technical Memorandum (TM).

Filtration↗

NASA NTRS1993

Particle-Gas Dynamics in the Midplane of a Protoplanetary Nebula

In this paper, we study the stage of planetary formation during which the particulate material is still dispersed as centimeter-to-meter sized primordial aggregates. During this stage, particles are able to settle toward the midplane into a layer of mass density comparable to or much greater than that of the gas. Nonlinear, coupled interactions between the particles and the nebula gas become significant and ultimately determine the vertical profiles of the particle density and the mean velocities of the particles and the nearby gas. This is the environment in which the earliest planetesimals probably form. Our numerical models rely on the Reynolds averaged Navier-Stokes equations for the gas and particles and are fully viscous and turbulent (and, for the particles. compressible). Our turbulence modeling uses a Prandtl local shear parametrization, validated by laboratory experiments. We have developed a new model for particle diffusion involving the profile of the nebula gas turbulence and the particle Schmidt number, which is a function of particle size and density. We model a cool, quiescent nebula at 1 AU (280 K) and 10 AU (90 K) and a higher temperature stage (1000 K) at 1 AU. Our main results include: (a) rapid accretion of planetesimals by gravitationally unstable fragmentation on an orbital time scale (the 'Goldreich-Ward instability') is unlikely to occur until objects have already accreted by some other process to the mass of the largest known meteorite samples, if at all; (b) from 'seeds' as small as 10 m, growth of 10- to 100-km planetesimals can proceed rapidly by drift-augmented accretion in the particle-rich midplane with orbital decay of about 1% for the growing planetesimals; (c) outward transport of vapor and small entrained chips can account for significant radial compositional and mineralogical mixing in primitive meteorite parent bodies. Other implications may be drawn concerning particle random collisional velocities and the time scales of midplane turbulence.

Cuzzi, Jeffrey N.↗