Search NASA⌕ Search

SEARCH · Search NASA

Results for “grazing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Detection of Vegetation Trends in Highly Variable Environments After Grazing Exclusion in Mongolia

Aims: Environmental variability (e.g. in precipitation) has a large effect on vegetation dynamics, and this often makes it difficult to assess the recovery of vegetation after a disturbance. In this study, we assessed vegetation recovery trends in response to grazing exclusion while considering for the annual environmental variability. Location: Two regions with highly variable precipitation: a steppe near Mandalgobi, in Mongolia's Central Gobi province, and a desert steppe near Bulgan, in Mongolia's South Gobi province. Methods: Changes in vegetation were observed along grazing gradients at the above two sites, and vegetation thresholds were identified. We established reference plots in pre-threshold areas along the grazing gradients. We removed the impact of livestock grazing at various locations along the grazing gradients by establishing exclosures, and investigated vegetation from 2005 to 2013. We developed a smoothed hierarchical model within a Bayesian framework, and examined the effect of grazing exclusion on vegetation, focusing especially on the extent of grass cover recovery. In addition, we compared soil nutrient conditions in the reference plots and inside and outside each exclosure along the grazing gradients. Results: Temporal trends in the cover of perennial grass in each plot inside and outside of the exclosures largely coincided, irrespective of grazing intensity, and exclosure had no effect (Bulgan) or a negative effect (Mandalgobi) on vegetation recovery. Soil nutrient content was not significantly affected by exclosure at a given distance from the grazing source, but decreased significantly with decreasing grazing intensity. Thus, recovery of the land from a post-threshold state may not be apparent even after 9 yr of grazing exclusion in environments with highly variable precipitation. Conclusion: The effect of exclosure duration on perennial grass cover was limited, even after controlling for environmental variability. Once a vegetation threshold has been crossed, merely removing livestock from the landscape may not be sufficient for that area to recover.

Bayesian statistics;Drought;Environmental variabil↗
NASA NTRS2023

Southern Idaho Ecological Conservation: Investigating the Impact of Targeted Grazing to Improve Wetland Habitat in the Sterling Wildlife Management Area

Wetland ecosystems are vital for biodiversity conservation and ecosystem services. The Sterling Wildlife Management Area in Bingham County, Idaho, has management concerns about decadent and accumulated vegetation growth encroaching on wetland habitat, which presents challenges for wildlife, decreases biodiversity, and limits public access. Targeted grazing has been proposed as a sustainable alternative to chemical herbicides or burning. Land managers introduced targeted cattle grazing in January 2021 to reduce biomass. NASA DEVELOP partnered with the Idaho Department of Fish and Game to determine the impact of grazing using NASA Earth observations from Landsat 8 Operational Land Imager (OLI) in Google Earth Engine (GEE). Images were processed with TerrSet’s Land Change Modeler and ArcGIS Pro’s Change Detection Wizard to understand land changes following grazing. A Normalized Difference Vegetation Index (NDVI) analysis was performed to assess impacts on vegetation productivity and compare variance in biomass before and after grazing. A Normalized Difference Water Index (NDWI) was used to compare changes in the wetland and its vegetation content to evaluate the suitability of the area for migratory birds post-grazing. Results showed a decrease in the vegetation index and an increase in the water index postgrazing. The DEVELOP team’s analysis suggests that grazing helps break down thick, senesced vegetation and increase soil moisture. Providing a workflow model will aid partners in continuing to monitor this management area and other management areas across the state.

change detection↗
NASA NTRS1976

A theoretical study of the acoustic impedance of orifices in the presence of a steady grazing flow

An analysis of the oscillatory fluid flow in the vicinity of a circular orifice with a steady grazing flow is presented. The study is similar to that of Hersh and Rogers but with the addition of the grazing flow. Starting from the momentum and continuity equations, a considerably simplified system of partial differential equations is developed with the assumption that the flow can be described by an oscillatory motion superimposed upon the known steady flow. The equations are seen to be linear in the region where the grazing flow effects are dominant, and a solution and the resulting orifice impedance are presented for this region. The nonlinearity appears to be unimportant for the usual conditions found in aircraft noise suppressors. Some preliminary conclusions of the study are that orifice resistance is directly proportional to grazing flow velocity (known previously from experimental data) and that the orifice inductive (mass reactance) end correction is not a function of grazing flow. This latter conclusion is contrary to the widely held notion that grazing flow removes the effect of the orifice inductive end correction. This conclusion also implies that the experimentally observed total inductance reduction with grazing flow might be in the flow within the orifice rather than in the end correction.

Rice, E. J.↗
NASA NTRS1979

Effect of grazing flow on the acoustic impedance of Helmholtz resonators consisting of single and clustered orifices

A semiempirical fluid mechanical model is derived for the acoustic behavior of thin-walled single orifice Helmholtz resonators in a grazing flow environment. The incident and cavity sound fields are connected in terms of an orifice discharge coefficient whose values are determined experimentally using the two-microphone method. Measurements show that at high grazing flow speeds, acoustical resistance is almost linearly proportional to the grazing flow speed and almost independent of incident sound pressure. The corresponding values of reactance are much smaller and tend towards zero. For thicker-walled orifice plates, resistance and reactance were observed to be less sensitive to grazing flow as the ratio of plate thickness to orifice diameter increased. Loud tones were observed to radiate from a single orifice Helmholtz resonator due to interaction between the grazing flow shear layer and the resonator cavity. Measurements showed that the tones radiated at a Strouhal number equal to 0.26. The effects of grazing flow on the impedance of Helmholtz resonators consisting of clusters of orifices was also studied. In general, both resistance and reaction were found to be virtually independent of orifice relative spacing and number. These findings are valid with and without grazing flow.

Hersch, A. S.↗
NASA NTRS1992

The influence of grazing on surface climatological variables of tallgrass prairie

Mass and energy exchange between most grassland canopies and the atmosphere are mediated by grazing activities. Ambient temperatures can be increased or decreased by grazers. Data have been assembled from simulated grazing experiments on Konza Prairie Research Natural Area and observations on adjacent pastures grazed by cattle show significant changes in primary production, nutrient content, and bidirectional reflectance characteristics as a function of grazing intensity. The purpose of this research was to provide algorithms that would allow incorporation of grazing effects into models of energy budgets using remote sensing procedures. The approach involved: (1) linking empirical measurements of plant biomass and grazing intensities to remotely sensed canopy reflectance, and (2) using a higher resolution, mechanistic grazing model to derive plant ecophysiological parameters that influence reflectance and other surface climatological variables.

Seastedt, T. R.↗
NASA NTRS1993

Near grazing scattering from non-Gaussian ocean surfaces

We investigate the behavior of the scattered electromagnetic waves from non-Gaussian ocean surfaces at near grazing incidence. Even though the scattering mechanisms at moderate incidence angles are relatively well understood, the same is not true for near grazing rough surface scattering. However, from the experimental ocean scattering data, it has been observed that the backscattering cross section of a horizontally polarized wave can be as large as the vertical counterpart at near grazing incidence. In addition, these returns are highly intermittent in time. There have been some suggestions that these unexpected effects may come from shadowing or feature scattering. Using numerical scattering simulations, it can be shown that the horizontal backscattering cannot be larger than the vertical one for the Gaussian surfaces. Our main objective of this study is to gain a clear understanding of scattering mechanisms underlying the near grazing ocean scattering. In order to evaluate the backscattering cross section from ocean surfaces at near grazing incidence, both the hydrodynamic modeling of ocean surfaces and an accurate near grazing scattering theory are required. For the surface modeling, we generate Gaussian surfaces from the ocean surface power spectrum which is derived using several experimental data. Then, weakly nonlinear large scale ocean surfaces are generated following Longuet-Higgins. In addition, the modulation of small waves by large waves is included using the conservation of wave action. For surface scattering, we use MOM (Method of Moments) to calculate the backscattering from scattering patches with the two scale shadowing approximation. The differences between Gaussian and non-Gaussian surface scattering at near grazing incidence are presented.

Kim, Yunjin↗
NASA NTRS1973

A model for the pressure excitation spectrum and acoustic impedance of sound absorbers in the presence of grazing flow.

A unification of the theory of the nonlinear acoustic resistance of Helmholtz resonators including grazing flow is presented. The nonlinear resistance due to grazing flow is considered to be caused by an exciting pressure spectrum produced by the interaction of the grazing flow and the jets flowing from the resonator orifices. With this exciting pressure spectrum the resonator can be treated in the same manner as a resonator without grazing flow but with an exciting acoustic spectrum. One of the important implications of this model is that a multiple-degree-of-freedom resonator can be analyzed with grazing flow. Using the grazing flow pressure spectrum, the nonlinear acoustic resistance can be properly distributed among the several elements of the resonator.

Rice, E. J.↗
NASA NTRS1976

Orifice resistance for ejection into a grazing flow

To explain the decrease in orifice resistance with the addition of grazing flow, the flow from an orifice was modeled by using an inviscid analysis which is valid when the orifice flow total pressure is nearly the same as the free stream grazing flow total pressure. For steady outflow from an orifice into a grazing flow, the orifice flow can enter the main grazing flow in an inviscid manner without generating large eddies to dissipate the kinetic energy of the jet. From the analysis, a simple closed-form solution was developed for the steady resistance for ejection from an orifice into a grazing-flow field. The calculated resistance compare favorably with data for a flow regime where the total pressure difference between the grazing flow and the orifice flow is small.

Baumeister, K. J.↗
NASA NTRS1996

Grazing-Activated Production of Dimethyl Sulfide (DMS) by two clones of Emiliania huxleyi

Emiliania huxleyi clones CCMP 370 and CCMP 373 produced similar amounts of dimethylsulfoniopropionate (DMSP) during axenic exponential growth, averaging 109 mM internal DMSP. Both clones had detectable DMSP lyase activity, as measured by production of dimethyl sulfide (DMS) during in vitro assays of crude cell preparations, but activities and conditions differed considerably between clones. Clone 373 had high activity; clone 370 had low activity and required chloride. For both strains, enzyme activity per cell was constant during exponential growth, but little DMS was produced by healthy cells. Rather, DMS production was activated when cells were subjected to physical or chemical stresses that caused cell lysis. We propose that DMSP lyase and DMSP are segregated within these cells and re-action only under conditions that result in cell stress or damage. Such activation occurs during microzooplankton grazing. When these clones were grazed by the dinoflagellate Oxyrrhis marina, DMS was produced; ungrazed cells, as well as those exposed to grazer exudates and associated bacteria, generated no DMS. Grazing of clone 373 produced much more DMS than grazing of clone 370, consistent with their relative in vitro DMSP lyase activities. DMS was only generated when cells were actually being grazed, indicating that ingested cells were responsible for the DMS formation. We suggest that even low levels of grazing can greatly accelerate DMS production.

Wolfe, Gordon V.↗
NASA NTRS1973

A model for the pressure excitation spectrum and acoustic impedance of sound absorbers in the presence of grazing flow

The acoustic impedance of sound absorbers in the presence of grazing flow is essential information when analyzing sound propagation within ducts. A unification of the theory of the nonlinear acoustic resistance of Helmholtz resonators including grazing flow is presented. The nonlinear resistance due to grazing flow is considered to be caused by an exciting pressure spectrum produced by the interaction of the grazing flow and the jets flowing from the resonator orifices. With this exciting pressure spectrum the resonator can be treated in the same manner as a resonator without grazing flow but with an exciting acoustic spectrum.

Rice, E. J.↗
NASA NTRS1975

Visual study of the effect of grazing flow on the oscillatory flow in a resonator orifice

Grazing flow and oscillatory flow in an orifice were studied in a plexiglass flow channel with a single side branch Helmholtz resonator using water as the fluid medium. An oscillatory flow was applied to the resonatory cavity, and color dyes were injected in both the orifice and the grazing flow field to record the motion of the fluid. The flow regimes associated with linear and nonlinear (high sound pressure level) impedances with and without grazing flows were recorded by a high-speed motion-picture camera. Appreciable differences in the oscillatory flow field were seen in the various flow regimes. With high grazing flows, the outflow and inflow from the resonator cavity are found to be asymmetric. The visual study confirms that jet energy loss during flow into a resonator cavity is much larger than the loss for ejection from the cavity into the grazing flow. For inflow into the resonator cavity, the effective orifice area was significantly reduced.

Baumeister, K. J.↗
NASA NTRS1976

Effect of grazing flow on steady-state resistance of isolated square-edged orifices

Steady state diagnostic testing of an isolated orifice has shown the nature of the interaction between grazing and orifice flow causing the large increase in orifice resistance for both inflow and outflow. A simple inviscid interaction model is developed which uses thin aerofoil theory to account for pressure forces exerted at the interface between the orifice and grazing flow together with a one-dimensional discharge coefficient concept. The effect of grazing flow boundary layer thickness is also included in the model. Resistance measurements for each orifice tested, over a wide range of grazing flow speeds and flow rates, collapse into a single curve when plotted in terms of effective discharge coefficient against orifice to grazing velocity ratio. The correlation curves for inflow and outflow are different. Data for clustered orifices collapse in the same way as those for the single orifice. The effect of boundary layer thickness is compared with model predictions.

Rogers, T.↗
NASA NTRS1979

Effect of grazing flow on the nonlinear acoustic behavior of helmholtz resonators

A semi empirical fluid mechanical model is derived of the acoustic behavior of thin walled single orifice Helmholtz resonators in a grazing flow environment. The model assumes that the flow field incident to a resonator orifice consists of a spherical sound particle velocity field superimposed upon a mean grazing flow. The incident and cavity sound fields are connected in terms of an orifice discharge coefficient whose values are determined experimentally using the two microphone method. With regard to its application to rocket motor interiors, the most important finding of this study is that the acoustic impedance of Helmholtz resonators is affected by grazing flow when the product of the amplitude of the sound pressure incident to the resonator orifice and the rocket motor interior mean grazing flow speed are less than 0.5. For values greater than 0.5, the acoustic impedance is independent of the grazing flow.

Hersh, A. S.↗
NASA NTRS2019

Effect of Grazing Flow on Grooved Over-the-Rotor Acoustic Casing Treatments

After testing grooved over-the-rotor acoustic casing treatments on a turbofan rotor, a follow-on study was performed to investigate the effect of flow on grooved acoustic liners. The experiment was performed to understand the scaling of acoustic liner absorption with grazing flow and investigate a potential noise source from grooved acoustic liners. Acoustic liner absorption and reflection characteristics were quantified by examining the reduction in amplitude of a plane wave traveling over 2 inch liners with grazing flow. For all liners tested, as the grazing flow Mach number is increased, the absorption curves broadened and the frequency of peak absorption decreased. Grazing flow over a series of grooves was found to generate resonances up to 152 dB sound pressure level. Adding acoustic treatment to the bottom of these grooves was found to reduce the magnitude of this resonance by up to 10 dB sound pressure level and increase its frequency by up to 10%. The quantification of the grazing flow effect and identification of a mechanism behind the noise penalty from the prior turbofan rotor experiment will aid in the design of future over-the-rotor treatments.

acoustic↗
NASA NTRS1975

The effect of grazing flow on the steady state resistance of square-edged orifices

A simple inviscid interaction model has been developed which uses thin airfoil theory to account for pressure forces exerted at the interface between the orifice and grazing flow together with a one-dimensional discharge coefficient concept. The effect of grazing flow boundary layer thickness was also included in the model. Resistance measurements for a wide range of grazing flow speeds and orifice flow rates collapse into a single curve when plotted in terms of effective discharge coefficient versus orifice-to-grazing velocity ratio. The correlation curves for inflow and outflow are different. Data for clustered orifices collapse in the same way as the single orifice. The effect of boundary layer thickness is compared with model predictions. The effect of orifice length-diameter ratio is shown to be significant for inflow but negligible for outflow.

Rogers, T.↗
NASA NTRS1976

A theoretical study of the acoustic impedance of orifices in the presence of a steady grazing flow

Oscillatory fluid flow in the vicinity of a circular orifice with a steady grazing flow is analyzed. A simplified system of partial differential equations is obtained by starting with the momentum and continuity equations and by assuming that the flow can be represented as an oscillatory motion superimposed on the (known) steady flow. It is found that the equations are linear in the region where grazing-flow effects dominate; a solution and the resultant orifice impedance are given for this region. It is tentatively concluded that orifice resistance is directly proportional to grazing-flow velocity and that the orifice inductive end correction is not a function of grazing flow.

Rice, E. J.↗
NASA NTRS1979

Application of a finite element method for computing grazing incidence wave structure in an impedance tube - Comparison with experiment

The acoustic performance of a liner specimen, in a grazing incidence impedance tube, is analyzed using a finite element method. The liner specimen was designed to be a locally reacting, two-degree-of-freedom type with the resistance and reactance provided by perforated facesheets and compartmented cavities. Measured and calculated wave structures are compared for both normal and grazing incidence from 0.3 to 1.2 kHz. A finite element algorithm was incorporated into an optimization loop in order to predict liner grazing incidence impedance from measured SWR and null position data. Results suggest that extended reaction effects may have been responsible for differences between normal and grazing incidence impedance estimates.

Lester, H. C.↗
NASA NTRS1986

Grazing incidence optics; Proceedings of the Meeting, Orlando, FL, Apr. 3, 4, 1986

Papers are presented on the diffraction-limited performance of grazing incidence optical systems; transverse ray aberrations of Wolter type 1 telescopes; hybrid X-ray telescope systems; surface characterization of grazing incidence optics in the extreme UV and X-ray regions; and the surface roughness properties of synchrotron radiation optics. Topics discussed include the simulation of free-abrasive grinding of grazing incidence mirrors with vertical-honing and flexible blades; mirrors for the Extreme Ultraviolet Explorer; the design and development of conical X-ray imaging mirrors; thermal loading considerations for synchrotron radiation mirrors; and grazing incidence optics for synchrotron radiation insertion-device beams. Consideration is given to the interpretation of glancing incidence scattering measurements; damage processes in short wavelength coated FEL optics; the replication of grain incidence optics; and the assembly and alignment of the Technology Mirror Assembly.

Osantowski, John F.↗