Greener pathways for energy-intensive commodity chemicals: opportunities and challenges
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Not provided.
Organic semiconducting polymers are exciting materials for electronic applications because of their good mechanical and optoelectronic properties. A major advantage of organic semiconductors is their solution processability. This allows access to a variety of simple and cost-effective device fabrication methods compared to the expensive, high-temperature processing methods required for silicon-based electronics. However, these materials often have low solubility, which limits their processing to toxic halogenated solvents. Also, their limited solubility often leads to interfacial mixing during device fabrication. Herein, this work explores the incorporation of environmentally friendly carbohydrate side chains in conjugated polymers to enhance processability in eco-friendly solvents. Moreover, a mild postprocessing treatment was designed to enable solvent resistance. Isoindigo-based polymers with varied ratios of acetyl-protected galactose side chains were synthesized to improve solubility in o-anisole in the protected state, while inducing solvent resistance through intramolecular hydrogen bonding in the deprotected state. Solvent resistance was confirmed both visually upon submersion in various solvents and using UV–visible spectroscopy. Importantly, the mild basic treatment to achieve solvent resistance has no negative impact on the electronic performance of these materials in organic field-effect transistors, even after subsequent submersion in various solvents, making them a valuable platform for the production of green processable multilayer electronics.
N-methyl-2-pyrrolidone (NMP) is the normally used solvent for cathode processing in lithium battery field. However, its high toxicity attracted more and more environmental scrutiny and was restricted by many chemical legislations in industry applications. So, it is necessary to find a greener and safer alternative to replace it. Dihydrolevoglucosenone (Cyrene), a newly reported green dipolar aprotic solvent, has very similar solvent properties as NMP, making it a very attractive candidate. The possibility to use Cyrene to replace NMP for NMC 811 cathode fabrication was studied. Although PVDF binder has very poor solubility in Cyrene at room temperature, increasing temperature can significantly change this. High temperature (above 80 °C) electrode processing with Cyrene gives promising performance, which is comparable to the conventional NMP fabricated electrode. A proof of principle was provided: Cyrene can be a good green alternative to replace NMP. So, the positive results reported here may also lead to a search for more Cyrene-like green solvents that have a higher solubility for PVDF, or of PVDF-like binders that are more soluble in Cyrene, to help making the electrode processing much greener.
Green chemistry is a set of principles for assessing, developing, and implementing methods that are safer, more efficient, and less detrimental to the environment. The analytical method greenness score (AMGS) is one of many metrics that attempt to evaluate traditional liquid chromatography (LC) based on the energy consumption of the instrument and the safety, health risks, and environmental impact of the solvents employed. Unfortunately, in practice, the AMGS is primarily focused on traditional separation methods in the pharmaceutical industry and is not amenable to cutting-edge separation science, including miniaturization. To broaden this scope, the unified Analytical Method Greenness Score (uAMGS) is presented here, which clarifies and expands on the underlying mathematics and incorporates both dimensional and uncertainty analysis, enabling its application to a broader range of analytical techniques. The uAMGS is used to compare the greenness of two distinct methods: single-molecule microscopy (SMM) and high-performance liquid chromatography (HPLC), which were used to collect equivalent data. uAMGS determines that SMM is significantly greener than HPLC due primarily to decreased solvent consumption. Overall, the uAMGS should allow chemists ranging from undergraduates to industrial PhDs to assess the greenness of a wide range of separations.
The bauxite-derived adsorbent, activated alumina (AA), has a current annual global market of over 600 million USD, and of this, more than one-third of AA is used for defluoridation of fluoride-bearing water. The commonly used Bayer process for production of AA suffers from thermodynamic inefficiency, thereby raising costs, and also causes significant environmental damage. Here, we evaluate three other bauxite-derived adsorbents as alternatives to AA for water defluoridation: Mildly processed bauxite, thermally activated bauxite, and acid-treated thermally activated bauxite (ATAB). We first determine the energy intensity and resource efficiency of these three new adsorbents throughout their (future, anticipated) manufacturing processes and compare their defluoridation performance in the laboratory. Then, we quantify the carbon footprints of the three adsorbents via the product life-cycle approach, from their manufacturing to their applications in defluoridation. The results reveal that these three adsorbents exhibit less energy intensity and higher resource efficiency, thereby lowering their carbon footprints by 2-20×, relative to an equivalent amount of AA. We also estimate the operating costs of manufacturing and potential revenues from carbon offsets for each of the three adsorbents. Replacement of about 33 000 tonnes per year of AA currently used for wastewater treatment with equivalent ATAB could annually reduce annual manufacturing costs by 4.7 million USD and additionally generate 79 200 tonnes CO 2 offsets. Finally, this study supports decision-making on selecting a greener and more sustainable approach for wastewater defluoridation.
StimuFracTM, is a non-toxic stimuli-responsive fracturing fluid consisting on a CO2-reactive polymer which has shown at the lab-scale to consistently fracture rock cores at significantly lower net pressures in a range of representative geothermal pressure/temperature conditions. In this work, we report on the two main mechanisms responsible for fracturing rock at lower net pressures with this novel fracturing fluid. The first mechanism is the additional work / overpressure generated by aqueous polymer solution during its CO2-triggered volume expansion. The second mechanism is associated to a reduction in pore invasion pressure as a result of the lower interfacial tension of StimuFrac. This reduction in pore invasion pressure results in a reduction in fracturing net pressure as previously reported. The results presented in this work illustrate the potential of StimuFrac as a greener and less-energy intensive fracturing fluid for geothermal and fossil energy production.
Cost-effective yet safe creation of high-permeability reservoirs within deep bedrock is the primary challenge for the viability of enhanced geothermal systems (EGS) and unconventional oil/gas recovery. Although fracturing fluids are commonly used for oil/gas, standard fracturing methods are not developed or proven for EGS temperatures and pressures. Furthermore, the environmental impacts of currently used fracturing methods are only recently being determined. Widespread concerns about the environmental contamination have resulted in a number of regulations for fracturing fluids advocating for greener fracturing processes. To enable EGS feasibility and lessen environmental impact of reservoir stimulation, an environmentally benign, CO2-activated, rheoreversible fracturing fluid that enhances permeability through fracturing (at significantly lower effective stress than standard fracturing fluids) due to in situ volume expansion and gel formation is investigated herein. The chemical mechanism, stability, phase-change behavior, and rheology for a novel polyallylamine (PAA)-CO2 fracturing fluid was characterized at EGS temperatures and pressures. Hydrogel is formed upon reaction with CO2 and this process is reversible (via CO2 depressurization or solubilizing with a mild acid) allowing removal from the formation and recycling, decreasing environmental impact. Rock obtained from the Coso geothermal field was fractured in laboratory experiments under various EGS temperatures and pressures with comparison to standard fracturing fluids, and the fractures were characterized with imaging, permeability measurement, and flow modeling. This novel fracturing fluid and process may vastly reduce water usage and the environmental impact of fracturing practices and effectively make EGS production and unconventional oil/gas exploitation cost-effective and cleaner.
The replacement of traditional incandescent, halogen and fluorescent lamps by white light emitting diodes (WLEDs) is expected to reduce the global electricity consumption by one-third by 2030, according to the US Department of Energy. The current WLED technology uses rare-earth element (REE) based phosphor materials, which, not only is cost-intensive but also constitutes an environmental concern. Hence, researchers are in a quest for a new-generation of opto-electronic materials that can replace the conventional phosphors in WLEDs and thus aim towards a cleaner and more energy efficient lighting technology for the future. Luminescent metal–organic frameworks (LMOFs) have recently emerged as a new sub-class of MOFs which have demonstrated enormous potential for applications in sensing, imaging, optoelectronics and in solid-state lighting (SSL) technology. LMOFs could be game changers as lighting phosphors due to advantages such as high luminescence quantum yield, tunable excitation and emission which can be achieved by rational design and optimization of metal centers, linkers, and the guest molecules, facile fabrication into devices, and structural robustness. These clear advantageous features of LMOFs make them score over other contemporary materials, and enable them to be futuristic phosphor materials for WLED technology. Here, in this feature article, we will provide an overview of the most recent developments of LMOF-based phosphor materials for SSL with a special focus on WLED technology. The emphasis will be centered around REE-free LMOFs, as the aim is to direct the attention of the readers towards a more viable and greener lighting technology.
Correction for ‘Asymmetric side-chain engineering in semiconducting polymers: a platform for greener processing and post-functionalization of organic electronics’ by Madison Mooney et al. , Polym. Chem. , 2023, https://doi.org/10.1039/d2py01244h.
Explore the source record for details and available documents.
This work evaluated the effects of partial substitution of PBAT by thermoplastic whey protein isolate (WPIT) with addition of beeswax through blends processing and their morphological, mechanical, structural, thermal and rheological properties. Whey protein isolate (WPI) was denatured at 90 °C, using glycerol as plasticizer, to be transformed in a thermoplastic material and subsequently blended with PBAT using a torque rheometer at 130 °C. Addition of 10 and 30% of WPIT in the PBAT matrix was investigated with and without beeswax. Blends were pressed as films with ~ 320 µm of thickness. Scanning electron microscopy (SEM) analysis of PBAT/WPIT blends films revealed the presence of domains. These domains are compounded of whey protein, while at the continuous phase a moderate degree of mixture between PBAT and WPIT was observed by Raman analyses. WPIT did not alter the degree of crystallinity and the glass-transition temperature (T{sub g}) of the PBAT in the blends. Thermogravimetric curves of the blends showed decomposition stages related to WPIT and PBAT phases. Thermal stability of blends decreased in comparison to WPIT, which was associated to the cleavage of disulfide bonds of WPIT during processing and causes other kind of interaction between components. Besides, blends containing WPIT remained non-rigid polymers with Young’s modulus below 70 MPa. The tensile strength and elongation at break decreased due the presence of WPIT. Beeswax did not influence the thermal and mechanical properties explored in this study.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Highlights: • Bicycle lane use is affected by parked cars and low accessibility to green spaces. • Criteria for developing bicycle lanes are determined by user experience and needs. • Public participation should play a key role for planning new bicycle lanes connecting green parks. Cities undergoing climate change and rapid urbanization are faced with significant transformational processes that affect the environment and society, challenging them to become more sustainable and resilient. The promotion of nature-based solutions represents an efficient approach to meet sustainability targets in cities and improve the quality of life of citizens. The association of large components of green infrastructure, such as urban parks, with physical activity can counteract the sedentary lifestyle endemic to cities and improve the overall health and well-being of individuals (Carrus et al., 2013, Scopelliti et al., 2016). By promoting a sustainable means of transport and connecting green spaces within a highly urbanized city, bicycle lanes represent an effective tool for associating physical activity with nature in cities allowing bicycle users to benefit from the positive health effects of nature-based solutions. Our study focuses on the potential of bicycle lanes to improve functional connectivity among green spaces. We administered 820 questionnaires in 34 green spaces (i.e., urban parks) in Bucharest, Romania, to identify the factors influencing the use of bicycle lanes connecting urban parks and to understand which planning criteria for bicycle lanes are considered as the most important by park visitors. We applied binary and ordinal logistic regressions and found that the factors affecting bicycle lane use are illegally parked cars and lack of accessibility to urban parks. The criteria preferred by park visitors for bicycle lane planning are determined by experience level and frequency of bicycle use. To develop a functional and integrated bicycle lane network that can make cities healthier and more sustainable, policy makers are advised to engage in a public participatory process and focus on the needs of bicycle users.