Search NASA⌕ Search

SEARCH · Search NASA

Results for “grid generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Best Practices In Overset Grid Generation

Grid generation for overset grids on complex geometry can be divided into four main steps: geometry processing, surface grid generation, volume grid generation and domain connectivity. For each of these steps, the procedures currently practiced by experienced users are described. Typical problems encountered are also highlighted and discussed. Most of the guidelines are derived from experience on a variety of problems including space launch and return vehicles, subsonic transports with propulsion and high lift devices, supersonic vehicles, rotorcraft vehicles, and turbomachinery.

Chan, William M.↗
NASA NTRS1991

Algebraic grid generation for coolant passages of turbine blades with serpentine channels and pin fins

In order to study numerically details of the flow and heat transfer within coolant passages of turbine blades, a method must first be developed to generate grid systems within the very complicated geometries involved. In this study, a grid generation package was developed that is capable of generating the required grid systems. The package developed is based on an algebraic grid generation technique that permits the user considerable control over how grid points are to be distributed in a very explicit way. These controls include orthogonality of grid lines next to boundary surfaces and ability to cluster about arbitrary points, lines, and surfaces. This paper describes that grid generation package and shows how it can be used to generate grid systems within complicated-shaped coolant passages via an example.

Shih, T. I.-P.↗
NASA NTRS1995

Generating grids directly on CAD database surfaces using a parametric evaluator approach

A very important, but often overlooked step in grid generation is acquiring a suitable geometry definition of the vehicle to be analyzed. In the past, geometry was usually obtained by generating a number of cross-sections of each component. A number of recent efforts have focussed on non-uniform rational B-spline surfaces (NURBS) to provide as single type of analytic surface to deal with inside the grid generator. This approach has required the development of tools to read other types of surfaces and convert them, either exactly or by approximation, into a NURBS surface. This paper describes a more generic parametric evaluator approach, which does not rely on a particular surface type internal to the grid generation system and is less restrictive in the number of surface types that can be represented exactly. This approach has been implemented in the McDonnell Douglas grid generation system, MACGS, and offers direct access to all types of surfaces from a Unigraphics part file.

Gatzhe, Timothy D.↗
NASA NTRS1992

Multiblock grid generation for jet engine configurations

The goal was to create methods for generating grids with minimal human intervention that are applicable to a wide range of problems and compatible with existing numerical methods and with existing and proposed computers. The following topics that are related to multiblock grid generation are briefly covered in viewgraph form: finding a domain decomposition, dimensioning grids, grid smoothing, manipulating grids and decompositions, and some specializations for jet engine configurations.

Stewart, Mark E. M.↗
NASA NTRS1982

Numerical grid generation; Proceedings of the Symposium on Numerical Generation of Curvilinear Coordinate Systems and Their Use in the Numerical Solution of Partial Differential Equations, Nashville, TN, April 13-16, 1982

General curvilinear coordinate systems are considered along with the error induced by coordinate systems, basic differential models for coordinate generation, elliptic grid generation, conformal grid generation, algebraic grid generation, orthogonal grid generation, patched coordinate systems, and solid mechanics applications of boundary fitted coordinate systems. Attention is given to coordinate system control and adaptive meshes, the application of body conforming curvilinear grids for finite difference solution of external flow, the use of solution adaptive grids in solving partial differential equations, adaptive gridding for finite difference solutions to heat and mass transfer problems, and the application of curvilinear coordinate generation techniques to the computation of internal flows. Other topics explored are related to the solution of nonlinear water wave problems using boundary-fitted coordinate systems, the numerical modeling of estuarine hydrodynamics on a boundary-fitted coordinate system, and conformal grid generation for multielement airfoils.

Thompson, J. F.↗
NASA NTRS1987

Algebraic grid generation

Algebraic grid generation is the direct expression of a physical coordinate system as a function of a uniform grid in a rectangular computational coordinate system. Algebraic grid generation is based on mathematical interpolation and is presented in general terms of multivariate transfinite interpolation. The multisurface method and the two-boundary technique are described as univariate procedures that can be applied within the context of transfinite interpolation. A technique for grid clustering is described. Problems that are commonly encountered in three-dimensional grid generation are discussed and approaches for dealing with complex physical domains using multiple computational grid blocks are presented.

Smith, Robert E.↗
NASA NTRS1994

TIGGERC: Turbomachinery Interactive Grid Generator for 2-D Grid Applications and Users Guide

A two-dimensional multi-block grid generator has been developed for a new design and analysis system for studying multiple blade-row turbomachinery problems. TIGGERC is a mouse driven, interactive grid generation program which can be used to modify boundary coordinates and grid packing and generates surface grids using a hyperbolic tangent or algebraic distribution of grid points on the block boundaries. The interior points of each block grid are distributed using a transfinite interpolation approach. TIGGERC can generate a blocked axisymmetric H-grid, C-grid, I-grid or O-grid for studying turbomachinery flow problems. TIGGERC was developed for operation on Silicon Graphics workstations. Detailed discussion of the grid generation methodology, menu options, operational features and sample grid geometries are presented.

Miller, David P.↗
NASA NTRS1991

Grid generation and compressible flow computations about a high-speed civil transport configuration

Techniques and software are discussed for generating grids about a high-speed civil transport configuration. The configuration is defined by a computer-aided design system in wing, fuselage, tail and engine-nacelle components. Grid topology and the surfaces outlining the blocks of the topology are computed with interactive software. The volume grid is computed using software based on transfinite interpolation and Lagrangian blending functions. Several volume grids for inviscid and viscous flow have been generated using this system of codes. Demonstration flowfields around this vehicle are described.

Abolhassani, J. S.↗
NASA NTRS1991

A generalized scheme for three-dimensional hyperbolic grid generation

A hyperbolic grid generation scheme formulated from grid orthogonality and cell volume specification is generalized such that high quality three-dimensional grids can be obtained for a wide variety of geometries. The speed of the scheme is one to two orders of magnitude faster than typical elliptic grid generation methods. The robustness of the scheme is significantly enhanced by several new techniques. By using a spatially variable smoothing coefficient, orthogonality and smoothness of the grid are maintained around complex concave and convex surface topologies. A metric correction procedure is employed to guarantee that the grid marches out of a corner by bisecting the angles subtended by the neighboring points. Extra robustness at severe convex corners is achieved by special local treatments. Different extrapolation methods are used to provide smoothness at floating edges and axis regions. The versatility of the new hyperbolic grid generation scheme is demonstrated by three-dimensional grids generated for external components of the intergrated Space Shuttle vehicle and the SOFIA telescope.

Chan, William M.↗
NASA NTRS1992

An interactive multi-block grid generation system

A grid generation procedure combining interactive and batch grid generation programs was put together to generate multi-block grids for complex aircraft configurations. The interactive section provides the tools for 3D geometry manipulation, surface grid extraction, boundary domain construction for 3D volume grid generation, and block-block relationships and boundary conditions for flow solvers. The procedure improves the flexibility and quality of grid generation to meet the design/analysis requirements.

Kao, T. J.↗
NASA NTRS1988

Grid generation on and about a cranked-wing fighter aircraft configuration

Experiences at the NASA Langley Research Center generating grids about a cranked wing fighter aircraft configuration is described. A single block planar grid about the fuselage and canard used with a finite difference Navier-Stokes solver is also described. A dual block nonplanar grid about the complete configuration and used with a finite volume Euler solver is presented. The very important aspect of computing the aircraft surface grid, starting with a standardized model description, is also presented.

Smith, Robert E.↗
NASA NTRS2009

Domain Decomposition By the Advancing-Partition Method for Parallel Unstructured Grid Generation

A new method of domain decomposition has been developed for generating unstructured grids in subdomains either sequentially or using multiple computers in parallel. Domain decomposition is a crucial and challenging step for parallel grid generation. Prior methods are generally based on auxiliary, complex, and computationally intensive operations for defining partition interfaces and usually produce grids of lower quality than those generated in single domains. The new technique, referred to as "Advancing Partition," is based on the Advancing-Front method, which partitions a domain as part of the volume mesh generation in a consistent and "natural" way. The benefits of this approach are: 1) the process of domain decomposition is highly automated, 2) partitioning of domain does not compromise the quality of the generated grids, and 3) the computational overhead for domain decomposition is minimal. The new method has been implemented in NASA's unstructured grid generation code VGRID.

Pirzadeh, Shahyar Z.↗
NASA NTRS1996

Development of an Automatic Grid Generator for Multi-Element High-Lift Wings

The procedure to generate the grid around a complex wing configuration is presented in this report. The automatic grid generation utilizes the Modified Advancing Front Method as a predictor and an elliptic scheme as a corrector. The scheme will advance the surface grid one cell outward and the newly obtained grid is corrected using the Laplace equation. The predictor-corrector step ensures that the grid produced will be smooth for every configuration. The predictor-corrector scheme is extended for a complex wing configuration. A new technique is developed to deal with the grid generation in the wing-gaps and on the flaps. It will create the grids that fill the gap on the wing surface and the gap created by the flaps. The scheme recognizes these configurations automatically so that minimal user input is required. By utilizing an appropriate sequence in advancing the grid points on a wing surface, the automatic grid generation for complex wing configurations is achieved.

Eberhardt, Scott↗
NASA NTRS1997

Complex Volume Grid Generation Through the Use of Grid Reusability

This paper presents a set of surface and volume grid generation techniques which reuse existing surface and volume grids. These methods use combinations of data manipulations to reduce grid generation time, improve grid characteristics, and increase the capabilities of existing domain discretization software. The manipulation techniques utilize physical and computational domains to produce basis function on which to operate and modify grid character and smooth grids using Trans-Finite Interpolation, a vector interpolation method and parametric re-mapping technique. With these new techniques, inviscid grids can be converted to viscous grids, multiple zone grid adaption can be performed to improve CFD solver efficiency, and topological changes to improve modeling of flow fields can be done simply and quickly. Examples of these capabilities are illustrated as applied to various configurations.

Alter, Stephen J.↗
NASA NTRS1992

Domain modeling and grid generation for multi-block structured grids with application to aerodynamic and hydrodynamic configurations

About five years ago, a joint development was started of a flow simulation system for engine-airframe integration studies on propeller as well as jet aircraft. The initial system was based on the Euler equations and made operational for industrial aerodynamic design work. The system consists of three major components: a domain modeller, for the graphical interactive subdivision of flow domains into an unstructured collection of blocks; a grid generator, for the graphical interactive computation of structured grids in blocks; and a flow solver, for the computation of flows on multi-block grids. The industrial partners of the collaboration and NLR have demonstrated that the domain modeller, grid generator and flow solver can be applied to simulate Euler flows around complete aircraft, including propulsion system simulation. Extension to Navier-Stokes flows is in progress. Delft Hydraulics has shown that both the domain modeller and grid generator can also be applied successfully for hydrodynamic configurations. An overview is given about the main aspects of both domain modelling and grid generation.

Spekreijse, S. P.↗
NASA NTRS1994

Hyperbolic Prismatic Grid Generation and Solution of Euler Equations on Prismatic Grids

A hyperbolic grid generation method is used to generate prismatic grids and an approach using prismatic grids to solve the Euler equations is presented. The theory of the stability and feasibility of the hyperbolic grid generation method is presented. The hyperbolic grid generation method of Steger et al for structured grids is applied to a three dimensional triangularized surface definition to generate a grid that is unstructured on each successive layer. The grid, however, retains structure in the body-normal direction and has a computational cell shaped like a triangular prism. In order to take advantage of the structure in the normal direction, a finite-volume scheme that treats the unknowns along the normal direction implicitly is introduced and the flow over a sphere is simulated.

Pandya, S. A.↗
NASA NTRS1992

Enhancements to the GRIDGEN structured grid generation system for internal and external flow applications

GRIDGEN is a government domain software package for interactive generation of multiple block grids around general configurations. Though it has been freely available since 1989, it has not been widely embraced by the internal flow community due to a misconception that it was designed for external flow use only. In reality GRIDGEN has always worked for internal flow applications, and GRIDGEN ongoing enhancements are increasing the quality of and efficiency with which grids for external and internal flow problems may be constructed. The software consists of four codes used to perform the four steps of the grid generation process. GRIDBLOCK is first used to decompose the flow domain into a collection of component blocks and then to establish interblock connections and flow solver boundary conditions. GRIDGEN2D is then used to generate surface grids on the outer shell of each component block. GRIDGEN3D generates grid points on the interior of each block, and finally GRIDVUE3D is used to inspect the resulting multiple block grid. Three of these codes (GRIDBLOCK, GRIDGEN2D, and GRIDVUE3D) are highly interactive and graphical in nature, and currently run on Silicon Graphics, Inc., and IBM RS/6000 workstations. The lone batch code (GRIDGEN3D) may be run on any of several Unix based platforms. Surface grid generation in GRIDGEN2D is being improved with the addition of higher order surface definitions (NURBS and parametric surfaces input in IGES format and bicubic surfaces input in PATRAN Neutral File format) and double precision mathematics. In addition, two types of automation have been added to GRIDGEN2D that reduce the learning curve slope for new users and eliminate work for experienced users. Volume grid generation using GRIDGEN3D has been improved via the addition of an advanced hybrid control function formulation that provides both orthogonality and clustering control at the block faces and clustering control on the block interior.

Steinbrenner, John P.↗
NASA NTRS1989

Evaluation of the Dornier Gmbh interactive grid generation system

An interactive grid generation program, INGRID, is investigated and evaluated. A description of the task and work performed, a description and evaluation of INGRID, and a discussion of the possibilities for bringing INGRID into the NASA and Numerical Aerodynamic Simulator (NAS) computing environments is included. The interactive grid generation program was found to be a viable approach for grid generation and determined that it could be converted to work in the NAS environment but that INGRID does not solve the fundamentally hard problems associated with grid generation, specifically, domain decomposition.

Brown, Robert L.↗