Search NASA⌕ Search

SEARCH · Search NASA

Results for “grid size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

An Assessment of the Differences Between Spatial Resolution and Grid Size for the SMAP Enhanced Soil Moisture Product over Homogeneous Sites

Satellite-based passive microwave remote sensing typically involves a scanning antenna that makes measurements at irregularly spaced locations. These locations can change on a day to day basis. Soil moisture products derived from satellite-based passive microwave remote sensing are usually resampled to a fixed Earth grid that facilitates their use in applications. In many cases the grid size is finer than the actual spatial resolution of the observation, and often this difference is not well understood by the user. Here, this issue was examined for the Soil Moisture Active Passive (SMAP) enhanced version of the passive-based soil moisture product, which has a grid size of 9-km and a nominal spatial resolution of 33-km. In situ observations from core validation sites were used to compute comparison metrics. For sites that satisfied the established reliability and scaling criteria, the impact of validating the 9-km grid product with in situ data collected over a 9-km versus a 33-km domain was very small for the sites studied (0.039 cu. m/cu. m unbiased root mean square difference for the 9-km case versus 0.037 cu. m/cu. m for the 33-km case). This result does not mean that the resolution of the product is 9-km but that for the conditions studied here the soil moisture estimated from in situ observations over 9-km is a close approximation of the soil moisture estimated from in situ observations over the 33-km resolution. The implication is that using the enhanced SMAP product at its grid resolution of 9-km should not introduce large errors in most applications.

Soil moisture↗
NASA NTRS1981

A method of selecting grid size to account for Hertz deformation in finite element analysis of spur gears

A method of selecting grid size for the finite element analysis of gear tooth deflection is presented. The method is based on a finite element study of two cylinders in line contact, where the criterion for establishing element size was that there be agreement with the classical Hertzian solution for deflection. The results are applied to calculate deflection for the gear specimen used in the NASA spur gear test rig. Comparisons are made between the present results and the results of two other methods of calculation. The results have application in design of gear tooth profile modifications to reduce noise and dynamic loads.

Coy, J. J.↗
NASA NTRS2003

Kinetic Simulation of Inhomogeneous Plasma with a Variable Sized Grid System

Space plasmas are usually inhomogeneous and irregular. Particle in cell (PIC) plasma simulations, however, often consider the plasma to be homogeneous and periodic. Here non-periodic PIC simulations with inhomogeneities in the density, temperature and background magnetic field are considered. Boundary conditions and a variable sized grid system are discussed, along with an application to a magnetospheric plasma physics problem in the auroral zone.

Schriver, David↗
NASA NTRS1996

A Cell-Centered Multigrid Algorithm for All Grid Sizes

Multigrid methods are optimal; that is, their rate of convergence is independent of the number of grid points, because they use a nested sequence of coarse grids to represent different scales of the solution. This nesting does, however, usually lead to certain restrictions of the permissible size of the discretised problem. In cases where the modeler is free to specify the whole problem, such constraints are of little importance because they can be taken into consideration from the outset. We consider the situation in which there are other competing constraints on the resolution. These restrictions may stem from the physical problem (e.g., if the discretised operator contains experimental data measured on a fixed grid) or from the need to avoid limitations set by the hardware. In this paper we discuss a modification to the cell-centered multigrid algorithm, so that it can be used br problems with any resolution. We discuss in particular a coarsening strategy and choice of intergrid transfer operators that can handle grids with both an even or odd number of cells. The method is described and applied to linear equations obtained by discretization of two- and three-dimensional second-order elliptic PDEs.

Gjesdal, Thor↗
DOE OSTI2020

PBX9502 PAGOSA/SURF Calibration for 100 µm Grid Size

There are two methods to calibrate the SURF reactive burn explosives model.The first is to calibrate using Pop plot data. Because there are only two main parameters in SURF, called A and B, there is just enough flexibility in SURF to determine the Pop plot line, i.e., equivalent information to a slope and a single point on the line. However, due to the linearity of the Pop plot being based on logarithmic scales, a slight deviation off the Pop plot (though the fit to the Pop plot might be very good overall) can make considerable difference when comparing with the velocity profile data. The second calibration method thusly focuses strongly on matching entire velocity profile data. This is to say that individual velocity profiles extracted from embedded gages (in the case of PBX 9502, we refer to R. Gustavsen’s experimental data) may fit poorly, while the overall fit to the Pop plot may seem reasonable. In addition, there are other factors that could produce slightly different calibrations for SURF, while leading to an overall acceptable fit to data. One of those may be the physics code used and here we use Pagosa. Another is mesh size dependence. A third one stems from fitting a reactive burn model being done in conjunction with an equation of state (EOS) of the reactants and one for the products – different EOS can result in slightly different parameterizations. Finally, there are several secondary material parameters in SURF, and the overall fit will depend on the entire parameterization. The goal of this report is to clarify some of our previously made statements about SURF calibration, as well as to redo a systematic calibration using 100 µm grid resolution.

42 ENGINEERING↗
NASA NTRS1980

Variable-grid-size transformation for solving nonsimilar laminar and turbulent boundary-layers

A numerical code has been developed to calculate nonsimilar boundary-layers (either laminar, transitional, or turbulent). The formulation of the equations of motion employs two transformations for the y-coordinate which provide a dense spacing of points near the wall and, therefore, can provide engineering solutions using relatively few points in the y-direction. The turbulent viscosity is correlated in terms of a length scale, which is in turn a function of the physical y-coordinate and of the mean-flow velocity gradient at that point. The boundary-layer solutions computed using the present code are compared with theoretical solutions presented by other investigators and with data from the literature. Comparisons with the data indicate that the theoretical solutions provide suitable values for the pitot-pressure profiles and the displacement thickness. Significant differences exist in the one comparison between the theoretical and the experimental heat-transfer rates for hypersonic flow past a flat plate.

Bertin, J. J.↗
NASA NTRS1988

Parametric study of grid size, time step and turbulence modeling on Navier-Stokes computations over airfoils

An upwind-biased implicit approximate factorization algorithm is applied to several steady and unsteady turbulent flows. The thin layer form of the compressible Navier-Stokes equation is used. Both the flux vector splitting and flux difference splitting methods are used to determine fluxes, and the results are compared. Flux difference splitting predicts results more accurately than flux vector splitting on a given mesh size, but, in its present implementation, is more severely limited by the maximum CFL number for unsteady time accurate flows. Physical aspects of the computations are also examined. An equilibrium turbulent boundary layer model computes generally better steady and unsteady results than a nonequilibrium model when there is little to no boundary layer separation. Conversely, when a significant region of separation exists, the nonequilibrium model performs in better agreement with experiment.

Rumsey, Christopher L.↗
NASA NTRS1993

Nonhydrostatic effects in numerical modeling of mesoscale convective systems and baroclinic waves

The present investigation is concerned with the role of convection upon mesoscale modeling results, particularly when the grid resolution becomes small enough that there is not a clear scale separation between the explicitly resolved circulations and the parameterized clouds. In those situations, the vertical accelerations in explicitly resolved circulations become strong enough that the hydrostatic assumption may no longer be valid. These concerns arise from interests in improving mesoscale modeling per se and in improving the subgrid-scale parameterizations in global models. The hydrostatic and the nonhydrostatic options of the Colorado State University Regional Atmospheric Modeling System were used to simulate dry gravity currents in two dimensions, using several different horizontal grid sizes. With horizontal grid intervals of 10 km or less, nonhydrostatic simulations produce wider and colder heads and weaker but wider forced updrafts than do the hydrostatic simulations. Comparing the hydrostatic and nonhydrostatic models show that the difference between the vertical mass fluxes is much less than the difference between the vertical velocities. When the grid is fine enough to resolve the head of the gravity current, horizontal convergence at the gust front extends upwards almost to the head of the cold air. Vertical mass flux in the forced updraft at the front varies with horizontal grid size mainly as a function of the height of the simulated head. For coarser grids, which do not resolve the head, vertical mass flux at all heights decreases with increasing horizontal grid size. A comparison on nonhydrostatic simulations with horizontal grid intervals of 1 km and 2 km illustrates how decreasing the grid size does not necessarily increase the intensity of the resolved circulation. The smaller grid enables the simulated gravity current to entrain a bubble of warm air behind the head, which results in a weaker circulation with a shorter head and weaker updraft.

Cohen, Charles↗
NASA NTRS2012

Error Estimates of the Ares I Computed Turbulent Ascent Longitudinal Aerodynamic Analysis

Numerical predictions of the longitudinal aerodynamic characteristics for the Ares I class of vehicles, along with the associated error estimate derived from an iterative convergence grid refinement, are presented. Computational results are based on an unstructured grid, Reynolds-averaged Navier-Stokes analysis. The validity of the approach to compute the associated error estimates, derived from a base grid to an extrapolated infinite-size grid, was first demonstrated on a sub-scaled wind tunnel model at representative ascent flow conditions for which the experimental data existed. Such analysis at the transonic flow conditions revealed a maximum deviation of about 23% between the computed longitudinal aerodynamic coefficients with the base grid and the measured data across the entire roll angles. This maximum deviation from the wind tunnel data was associated with the computed normal force coefficient at the transonic flow condition and was reduced to approximately 16% based on the infinite-size grid. However, all the computed aerodynamic coefficients with the base grid at the supersonic flow conditions showed a maximum deviation of only about 8% with that level being improved to approximately 5% for the infinite-size grid. The results and the error estimates based on the established procedure are also presented for the flight flow conditions.

Abdol-Hamid, Khaled S.↗
NASA NTRSDate not supplied

A Review on Sensor Spatial Resolution and A Proposal on Grid Pixel Sizing

Sensor spatial resolution (SSR) is a determining factor in developing remote sensing instruments for earth observations. The SSR is defined as the full width at half maximum (FWHM) of sensor point/line spread function (PSF/LSF). This presentation first discusses large variations in image absolute SSR and SSR ratios to ground sampling distance (GSD) or grid pixel size from multiple instruments including AVHRR (Advanced Very-High Resolution Radiometer), MODIS (Moderate Resolution Imaging Spectroradiometer), VIIRS (Visible Infrared Imaging Radiometer Suite), WorldView and Planet. When the physics based SSR is more than twice the nominal grid pixel size, a more appropriate grid pixel size is proposed.

Guoqing (Gary) Lin↗
NASA NTRS2002

Mesoscale Convective Systems During SCSMEX: Simulations with a Regional Climate Model and a Cloud-Resolving Model

The South China Sea Monsoon Experiment (SCSMEX) was conducted in May-June 1998. One of its major objectives is to better understand the key physical processes for the onset and evolution of the summer monsoon over Southeast Asia and southern China. Multiple observation platforms (e.g., upper-air soundings, Doppler radar, ships, wind profilers, radiometers, etc.) during SCSMEX provided a first attempt at investigating the detailed characteristics of convection and circulation changes associated with monsoons over the South China Sea region. SCSMEX also provided precipitation derived from atmospheric budgets and comparison to those obtained from the Tropical Rainfall Measuring Mission (TRMM). In this paper, a regional scale model (with grid size of 20 km) and Goddard Cumulus Ensemble (GCE) model (with 1 km grid size) are used to perform multi-day integration to understand the precipitation processes associated with the summer monsoon over Southeast Asia and southern China. The regional climate model is used to understand the soil-precipitation interaction and feedback associated with a flood event that occurred in and around China's Yantz River during SCSMEX Sensitivity tests on various land surface models, sea surface temperature (SST) variations, and cloud processes are performed to understand the precipitation processes associated with the onset of the monsoon over the S. China Sea during SCSMEX. These tests have indicated that the land surface model has a major impact on the circulation over the S. China Sea. Cloud processes can effect the precipitation pattern while SST variation can effect the precipitation amounts over both land and ocean. The exact location (region) of the flooding can be effected by the soil-rainfall feedback. The GCE-model results captured many observed precipitation characteristics because it used a fine grid size. For example, the model simulated rainfall temporal variation compared quite well to the sounding-estimated rainfall. The results show there are more latent heat fluxes prior to the onset of the monsoon. However, more rainfall was simulated after the onset of the monsoon. This modeling study indicates the latent heat fluxes (or evaporation) have more of an impact on precipitation processes and rainfall in the regional climate model simulations than in the cloud-resolving model simulations. Research is underway to determine if the difference in the grid sizes or the moist processes used in these two models is responsible for the differing influence of surface fluxes an precipitation processes.

Tao, W.-K.↗
DOE OSTI2022

Numerical and experimental investigation of the flame kernel growth in a methane/air mixture near the lean flammability limit

Lean combustion has the potential to improve the thermal efficiency of spark-ignition engines, but it faces the significant challenge of increased cycle-to-cycle variation due to low mixture reactivity and unstable flame dynamics. Computational fluid dynamics (CFD) employing predictive models can guide engine design and optimize operating strategies for lean combustion. However, ignition and combustion models have rarely been validated at fuel-lean conditions, and a fundamental understanding of the early flame kernel growth process is also lacking for a successful sub-model development. Here, the present study develops a numerical simulation framework used to investigate early flame kernel growth in methane/air mixtures. A nanosecond-pulsed discharge (NPD) approach is employed to effectively decouple the flame kernel growth from the electrical discharge due to their difference in timescales, and equivalence ratios near the experimentally measured lean flammability limit (LFL) are selected to focus on challenging mixture conditions. Three numerical investigations, such as the choice of turbulence modeling, grid size, and grid control strategies, are examined to match both LFL and flame kernel structure measured from experiments. It is demonstrated that a quasi-direct numerical simulation (QDNS) with a fixed grid embedding of 10 μm can predict the LFL as φ CFD =0.61 and match the displacement speed of the kernel’s boundary marked in schlieren images. To predict the LFL and flame kernel shape, a fine grid (Δ≤12.5 μm) is needed to capture the consumption of formaldehyde (CH 2 O) in kernel’s reaction branches attached to the anode, and adaptive mesh refinement is replaced with the fixed embedding due to loss of simulation accuracy. Also, it is found that a large-eddy simulation (LES) using the Dynamic Structure model is not suitable for the NPD-induced flame kernel simulation because artificial sub-grid turbulent kinetic energy induced by shock dynamics alters the flow velocity calculation, resulting in divergence of LES from QDNS. Lastly, the simulation well matches the experimental data for the flame kernel evolution in three mixture conditions (φ = 0.7, 0.61, 0.55), showing toroidal flame kernel expansion and flame kernel growth/extinction.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1983

An orthogonal coordinate grid following the three-dimensional viscous flow over a concave surface

Swept wings designed for laminar flow control exhibit both centrifugal and crossflow instabilities which produce streamwise vortices that can lead to early transition from laminar to turbulent flow in the presence of Tollmien-Schlichting waves. This paper outlines an iterative algorithm for generation of an orthogonal, curvilinear, coordinate grid following the streamlines of the three-dimensional viscous flow over a swept, concave surface. The governing equations for the metric tensor are derived from the Riemann-Christoffel tensor for an Euclidian geometry. Unit vectors along streamline, normal and binormal directions are determined. The governing equations are not solved directly, but are employed only as compatibility equations. The scale factor for the streamline coordinate is obtained by an iterative integration scheme on a 200 x 100 x 5 grid, while the other two scale factors are determined from definitions. Sample results are obtained which indicate that the compatibility equation error decreases linearly with grid step size. Grids smaller than 200 x 100 x 5 are found to be inadequate to resolve the grid curvature.

Dagenhart, J. R↗
NASA NTRS1987

Studies of pressure-velocity coupling schemes for analysis of incompressible and compressible flows

Two pressure-velocity coupling schemes, both of which solve the fully implicit discretized equations governing the flow of fluids were examined, and the capability of performing large Reynolds number, low Mach number compressible flow calculations were assessed. The semi-implicit iterative SIMPLE algorithm is extended to handle transient compressible flow calculations. This extension takes into account a strong coupling between the pressure and temperature through a correction procedure, based on the equations of state. Results obtained from the extended SIMPLE algorithm are then compared to similar results obtained from the non-iterative PISO algorithm. Both time-dependent and steady state calculations were performed using an axisymmetric 2:1 pipe expansion geometry and laminar flow conditions corresponding to Reynolds number of 1000 and Mach number of 2.0. For calculations simulating a time-dependent compression/expansion process, both schemes exhibit transient features in excellent agreement with each other, and moreover, the PISO method shows a significant computational time reduction of 60 percent over the SIMPLE scheme, regardless of the time step size or grid size employed. The effects of numerical diffusion are shown to be significant in these calculations. For steady state compressible flows, however, the SIMPLE algorithm displays increasing computational efficiency over the PISO method as the time step sizes employed to reach steady state conditions are decreased.

Burgreen, Gregory Wayne↗
NASA NTRS1991

Verification of the proteus two-dimensional Navier-Stokes code for flat plate and pipe flows

The Proteus Navier-Stokes Code is evaluated for 2-D/axisymmetric, viscous, incompressible, internal, and external flows. The particular cases to be discussed are laminar and turbulent flows over a flat plate, laminar and turbulent developing pipe flows, and turbulent pipe flow with swirl. Results are compared with exact solutions, empirical correlations, and experimental data. A detailed description of the code set-up, including boundary conditions, initial conditions, grid size, and grid packing is given for each case.

Conley, Julianne M.↗
NASA NTRS1991

Verification of the Proteus two-dimensional Navier-Stokes code for flat plate and pipe flows

The Proteus Navier-Stokes Code is evaluated for two-dimensional/axisymmetric, viscous, incompressible, internal and external flows. The particular cases to be discussed are laminar and turbulent flows over a flat plate, laminar and turbulent dveloping pipe flows and turbulent pipe flow with swirl. Results are compared with exact solutions, empirical correlations and experimental data. A detailed description of the code set-up, including boundary conditions, intitial conditions, grid size and grid packing is given for each case.

Conley, Julianne M.↗
NASA NTRS2017

DPW-VI Results Using FUN3D with Focus on k-kL-MEAH2015 (k-kL) Turbulence Model

The Common Research Model wing-body configuration is investigated with the k-kL-MEAH2015 turbulence model implemented in FUN3D. This includes results presented at the Sixth Drag Prediction Workshop and additional results generated after the workshop with a nonlinear Quadratic Constitutive Relation (QCR) variant of the same turbulence model. The workshop provided grids are used, and a uniform grid refinement study is performed at the design condition. A large variation between results with and without a reconstruction limiter is exhibited on "medium" grid sizes, indicating that the medium grid size is too coarse for drawing conclusions in comparison with experiment. This variation is reduced with grid refinement. At a fixed angle of attack near design conditions, the QCR variant yielded decreased lift and drag compared with the linear eddy-viscosity model by an amount that was approximately constant with grid refinement. The k-kL-MEAH2015 turbulence model produced wing root junction flow behavior consistent with wind tunnel observations.

Abdol-Hamid, K. S.↗
NASA NTRS1996

Multiple Coarse Grid Multigrid Methods for Solving Elliptic Problems

In this paper we describe some classes of multigrid methods for solving large linear systems arising in the solution by finite difference methods of certain boundary value problems involving Poisson's equation on rectangular regions. If parallel computing systems are used, then with standard multigrid methods many of the processors will be idle when one is working at the coarsest grid levels. We describe the use of Multiple Coarse Grid MultiGrid (MCGMG) methods. Here one first constructs a periodic set of equations corresponding to the given system. One then constructs a set of coarse grids such that for each grid corresponding to the grid size h there are four grids corresponding to the grid size 2*h. Multigrid operations such as restriction of residuals and interpolation of corrections are done in parallel at each grid level. For suitable choices of the multigrid operators the MCGMG method is equivalent to the Parallel Superconvergent MultiGrid (PSMG) method of Frederickson and McBryan. The convergence properties of MCGMG methods can be accurately analyzed using spectral methods.

Xiao, Shengyou↗