Search NASA⌕ Search

SEARCH · Search NASA

Results for “heavy atom effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Photooxidation of Organic Sulfide Enhanced by Heavy Atom Effect in Porphyrin Metal–Organic Frameworks with a Sea Topology

The photoactivity of three porphyrin-based metal-organic frameworks (PMOFs) incorporating Al, Ga, and In nodes was systematically evaluated using the photooxidation of an organic sulfide (2-chloroethyl ethyl sulfide, or CEES; a mustard gas simulant). Faster photodegradation of CEES was observed for PMOFs with heavier metal nodes, placing In-PMOF as the most efficient photocatalyst in the series. Guided by this insight, we developed CSLA-10, a MOF integrating In nodes and Sn-doped porphyrin linker to synergistically amplify heavy-atom effects at both the nodes and ligand levels. CSLA-10 exhibited the fastest reported CEES photooxidation to date, achieving a half-life of 38 s in methanol under blue LED irradiation. When grafted onto textiles, CSLA-10 enabled solvent-free CEES degradation in air/O 2 with a half-life of 2.7 min and complete conversion within 7 min, representing the most rapid full degradation reported under solvent-free conditions. Furthermore, this work establishes a dual heavy-atom strategy for enhancing intersystem crossing and singlet oxygen generation in porphyrin MOFs, providing a rational design principle for next-generation photocatalysts for the degradation of toxic organic sulfides.

Metal-organic frameworks↗
DOE OSTI2025

Substituent effect on napthodithiophene-fused porphyrins: Understanding the unusual trend of fluorescence quantum yield quenching

A series of π-extended porphyrins containing thiophene units was prepared to investigate an unusual trend observed in the fluorescence quantum yield of naphtho[2,1-b:3,4-b']dithiophene-fused porphyrins. Monobenzoporphyrins carrying 2-thiophenyl (vinyl thiophene porphyrin) groups (2VTP, 2VTBr and Br2VTP) (numbering 2 and 3 refers to the position of sulfur on the thiophene ring) were synthesized through a Heck-based cascade reaction followed by a newly developed bromination method. These were converted to naphtho[2,1-b:3,4-b']dithiophene-fused porphyrin derivatives (FBr2VTP and F2VTBr) via ring closure with an intramolecular Scholl reaction. Increasingly larger Stokes shifts with a higher number of bromo groups were observed in the unfused π-extended molecular systems, reflecting the heavy atom effect. Fluorescence spectroscopy further confirmed the unusual trend seen in the previous work: structural rigidification in naphtho[2,1-b:3,4-b']dithiophene-fused porphyrins leads to longer fluorescence lifetimes but unexpectedly lowers the quantum yield. Adding one bromo group to the naphtho[2,1-b:3,4-b']dithiophene unit does not change this trend. Furthermore, the presence of two bromo groups prevents the quantum yield from dropping. DFT, TDDFT, and NICS analyses suggest a drastic change in aromaticity in the pyrrole ring where the naphtho[2,1-b:3,4-b']dithiophene is fused in FBr2VTP, which might contribute to the quantum yield reductions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Thorough Characterization of the Tellurocyanate Anion

Tellurocyanate, [TeCN] − , is the heaviest group 16 congener of the cyanate anion, [OCN] − . Due to the relative instability of the C─Te bond, tellurocyanate chemistry has seen only scarce attention. Here, we present the facile synthesis and thorough characterization of [K@crypt-222][TeCN]. The anion is essentially linear with interatomic distances C─N = 1.150(6)Å and C─Te = 2.051(4)Å, thus approximating a C≡N triple bond and for C─Te a bond order between 1 and 2. Fully 13 C and 15 N labeled [Te 13 C 15 N] − allowed for the extraction of chemical shifts and all possible coupling constants ( 13 C = 77.8 ppm, 15 N = 285.7 ppm, 125 Te = −566 ppm, 1 J 13C-15N = 8 Hz, 1 J 13C-125Te = 748 Hz, 2 J1 5N-125Te = 55 Hz), which were also determined independently by quantum chemical calculations. In the series [ChCN] − (Ch = O─Te), [TeCN] − shows the strongest spin-orbit coupling (SOC) induced heavy-atom effect on the light-atom shielding (SO-HALA-effect). In contrast, 15 N shifts are also well described without considering relativistic effects and/or SOC. Negative-ion photoelectron spectroscopy was used to extract the electron affinity (EA = 3.034 eV) and spin-orbit splitting (3807 cm −1 ) of [TeCN] • . These values continue the trends of falling EA and rising SOC in the series [ChCN] • .

Bonding analysis↗
DOE OSTI2025

Electron correlation and relativistic effects in the excited states of radium monofluoride

Highly accurate and precise electronic structure calculations of heavy radioactive atoms and their molecules are important for several research areas, including chemical, nuclear, and particle physics. Ab initio quantum chemistry can elucidate structural details in these systems that emerge from the interplay of relativistic and electron correlation effects, but the large number of electrons complicates the calculations, and the scarcity of experiments prevents insightful theory-experiment comparisons. Here we report the spectroscopy of the 14 lowest excited electronic states in the radioactive molecule radium monofluoride (RaF), which is proposed as a sensitive probe for searches of new physics. The observed excitation energies are compared with state-of-the-art relativistic Fock-space coupled cluster calculations, which achieve an agreement of ≥99.64% (within ~12 meV) with experiment for all states. Guided by theory, a firm assignment of the angular momentum and term symbol is made for 10 states and a tentative assignment for 4 states. The role of high-order electron correlation and quantum electrodynamics effects in the excitation energies is studied and found to be important for all states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Results of the AGR-5/6/7 UCO TRISO fuel irradiation test in the Advanced Test Reactor

AGR-5/6/7 was the last in a series of irradiation experiments sponsored by the U.S. Department of Energy in support of the development and qualification of TRISO coated particle fuel for use in a high-temperature gas-cooled reactor. This experiment was conducted to verify the performance of the reference-design TRISO-coated low-enriched UCO fuel for modular high-temperature gas-cooled reactor normal operating conditions and to explore fuel performance at temperatures substantially beyond those typical of normal operation. A total of 194 UCO fuel compacts in five capsules were irradiated in the Advanced Test Reactor for 360.9 effective full-power days, achieving final burnup ranging from 5.66% to 15.26% fissions per initial heavy metal atom and fast neutron fluence ranging from 1.62 × 10 25 to 5.55 × 10 25 n/m 2 (E > 0.18 MeV). Calculated time-averaged fuel temperatures ranged from 467 °C to 1432 °C, with a peak fuel temperature of 1536 °C. During the first five irradiation cycles (∼180 effective full-power days), 85m Kr fission gas release-rate-to-birth-rate ratios were 10 −7 –10 −6 , indicating no particle failures. Near the end of the sixth cycle, a substantial number of in-pile particle failures occurred in Capsule 1. The fission gas release from this capsule impacted the readings from the other four capsules and led to unreliable fission gas release measurements for all capsules during the last four cycles. A preliminary post-irradiation examination of Capsule 1 fuel and internal components revealed the in-pile particle failures resulted from operational issues with the capsule, not subpar performance of the fuel particles.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Final state interactions for high energy scattering off atomic electrons

We consider the scattering of high energy leptons off bound atomic electrons focusing primarily on final state interactions between the outgoing energetic electron, and the heavy residual charged “debris” in the final state. These effects are inherently absent from calculations for a free electron at rest. Coulomb exchanges are enhanced by the large number of electrons in the atomic debris, and are unsuppressed by nonrelativistic velocities in the debris. We find that these exchanges can be resummed using operator methods, and cancel at the level of the cross section until at least 𝑂⁡(𝛼 3 ). Furthermore, we argue that both final and initial state Coulomb exchanges (enhanced by the number of electrons in the atom) do not affect the cross section until at least 𝑂⁡(𝛼 3 ). Transverse photon couplings to nonrelativistic electrons are proportional to their small velocities, and rotational invariance suppresses their contribution to 𝑂⁡(𝛼 3 ). Our results are relevant for precision experiments involving neutrinos, electrons, positrons, and muons scattering off of atomic electrons in a fixed target.

Atoms↗
DOE OSTI2025

Relativistic core–valence-separated equation-of-motion coupled-cluster singles and doubles method: Efficient implementation and benchmark calculations

An efficient implementation for the relativistic exact two-component core–valence-separated equation-of-motion coupled-cluster singles and doubles (X2C-CVS-EOM-CCSD) method is reported. The explicit exclusion of pure valence excitations in the EOM-CCSD excited-state eigenvalue equations significantly improves the efficiency for calculations of core-excited states. Benchmark relativistic CVS-EOM-CC calculations with systematic inclusion of relativistic, correlation, and basis-set effects are shown to provide highly accurate results for core ionized and excited states involving heavy atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Impact of atomic substitution on core-hole relaxation dynamics: A study of Br 2 and IBr

Understanding inner-shell decay processes in heavy-element molecules is essential for unraveling x-ray-induced photodynamics and advancing molecular imaging techniques. Here, in this study, we investigate the influence of atomic substitution on core-hole relaxation dynamics and molecular fragmentation in Br 2 and IBr, initiated by x-ray ionization absorption at the Br K-edge. Using a combination of x-ray/ion coincidence measurements and Monte Carlo/molecular dynamics simulations, we track the charge distribution and the kinetic energy release (KER) of fragment ions with a total charge from 2+ to 8+. For both molecules, the simulated KER values show good agreement with experiment across different fragmentation channels. Our comparison reveals that substituting Br with the heavier I atom in IBr has a minimal impact on the inner-shell electronic decay process but significantly influences nuclear motion, leading to slower dissociation and thus a KER close to the Coulomb limit—an effect attributed to the atomic mass. These findings highlight the interplay between electronic and nuclear effects in molecular fragmentation, particularly in heavy-element species, and provide new insights into medical therapies, structural biology, and astrophysics.

Bhat, Nivedita [Argonne National Laboratory (ANL),↗
DOE OSTI2026

Relativistic Exact Two-Component Theory in the Generalized Pseudospectral Representation

We present a formulation and implementation of exact two-component (X2C) relativistic theory in the generalized pseudospectral representation. When combined with the Hartree-Fock-Slater framework, this approach enables efficient and accurate treatments of scalar-relativistic and spin-orbit effects in atomic electronic structures without the computational overhead of four-component methods. Benchmark calculations across light and heavy elements demonstrate that the our X2C scheme yields substantially more accurate relativistic corrections to core-electron binding energies than perturbational Breit-Pauli treatments while converging more rapidly with respect to basis size. The method provides an improved computational framework for modeling ultrafast x-ray-induced processes in heavy-element systems.

Wang, Xubo↗
DOE OSTI2025

AGR-5/6/7 Irradiation Test Final As-run Report

This document presents the as-run analysis of the Advanced Gas Reactor (AGR)-5/6/7 irradiation experiment. AGR-5/6/7 is the last of a series of experiments conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory in support of the development and qualification of tri-structural isotropic low-enriched fuel for use in high-temperature gas-cooled reactors. The test train contained five separate capsules that were independently controlled and monitored. Each capsule contained multiple 24.91-mm-long and 12.25-mm-dimeter compacts filled with low-enriched uranium carbide/oxide tri-structural isotropic fuel particles. The objectives of the AGR-5/6/7 experiment were to: • Irradiate reference-design fuel particles to support fuel qualification. • Establish operating margins for the fuel, beyond normal operating conditions. • Provide irradiated-fuel performance data and irradiated-fuel samples for post-irradiation examination and safety testing. The primary objective of the AGR-5/6 test (Capsules 1, 2, 4, and 5) was to verify the successful performance of the reference-design fuel under normal operating conditions. The AGR-7 test (Capsule 3) was designed to explore fuel performance at higher temperatures. Its primary objective was to demonstrate the capability of the fuel to withstand conditions beyond normal operating conditions, in support of plant design and licensing. AGR-5/6/7 will also provide irradiated-fuel performance data based on the fission gas release from particles during irradiation. To achieve the test objectives, the AGR-5/6/7 experiment was irradiated in the northeast flux trap of the ATR with a planned duration of 500 effective full-power days. The northeast flux trap was selected because its larger diameter provided greater flexibility for test-train design compared to the Large B positions used for the AGR-1 and AGR-2 irradiations, significantly enhancing test capabilities for the combined irradiation campaigns. Due to delays in the ATR schedule, the AGR-5/6/7 irradiation was significantly shorter than the originally planned 13-cycle schedule. Irradiation began on February 16, 2018 and ended on July 22, 2020, spanning nine ATR cycles (162B–168A) over two and a half years. Thus, the AGR-5/6/7 fuel compacts were irradiated for a total of approximately 360.9 effective full-power days. Final burnup values, on a per-compact basis, ranged from 5.66 to 15.26% fissions per initial heavy metal atom, while fast fluence values ranged from 1.62 to 5.55 × 1025 n/m2 (E >0.18 MeV). Time-averaged volume-averaged fuel temperatures on a capsule basis at the end of irradiation ranged from 756°C in Capsule 5 to 1313°C in Capsule 3 excluding days with significantly lower temperature during the two short powered axial locator mechanism cycles, 163A and 167A. By the end of irradiation, 48 out of 54 installed thermocouples had failed (the bottom three capsules lost all thermocouples). During the first five cycles (162B – 165A), the fission-gas isotope release-rate-to-birthrate (R/B) ratios were stable in the 10-8–10-6 range, and no in-pile particle failures were observed based on the gross gamma counts. During this time, the high exposed kernel fraction and high fuel particle temperatures in Capsule 1 led to a maximum R/B value of around 2 ? 10-6 for Kr-85m. The fission gas release in all capsules started to increase from the second half of Cycle 166A, when a large number of in-pile particle failures occurred in Capsule 1 and a gas line problem in this capsule caused fission gas leakage at various degrees into the other four capsules. This gas line problem also prevented a fission gas release measurement for Capsule 1 during the last three cycles due to gas flow isolation. By the end of irradiation, it is estimated that approximately 15 particles failed in Capsule 3, which was considered possible because the experiment was designed to operate beyond the high-temperature gas-cooled reactor normal operating temperature range. A few hundred in-pile particle failures were estimated for Capsule 1 by the end of Cycle 166A, but the total number of failures is unknown due to the lack of fission gas release data in the later cycles. Additionally, four potential in-pile failures were identified for Capsule 2 during the last cycle, Cycle 168A. In contrast, no in-pile failures were identified in the top two capsules (4 and 5) based on the absence of the typical spikes in gross gamma counts and low failure estimates using the AGR-3/4 R/B per exposed kernel model.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Unveiling Swift Heavy Ion Track Morphology in Sr-Based High-Entropy Perovskites

The incorporation of multiple cations on a single lattice site in the high-entropy oxides is considered the key driving factor for modifying the known atomic-level response to energetic ion irradiation due to the presence of structural disorder; however, these effects are not well-understood yet. In this work, we present atomic-level insight into irradiation-induced nanoscale phase transformations in a perovskite-structured high-entropy oxide, Sr(Zr 0.2 Sn 0.2 Ti 0.2 Hf 0.2 Nb 0.2 )O 3 (Sr(HE)O 3 ), subjected to 774 MeV swift Xe heavy ions, where damage is dominated by inelastic ion−lattice interactions. While these ions generally are known to create nanoscale disordered channels, “ion tracks”, along the penetration direction in the material, this study shows the formation of discontinuous and partially recrystallized ion tracks in Sr(HE)O 3 . Compared to SrTiO 3 irradiated under identical energy loss conditions, the ion tracks in Sr(HE)O 3 exhibit significantly reduced diameters and a markedly different interfacial structure. Notably, the crystalline−amorphous interface in Sr(HE)O 3 shows minimal lattice distortion, confined to approximately 2−3 monolayers, in contrast to the extended disordered shell commonly observed in SrTiO 3 . Using in situ atomic-resolution electron microscopy, we further demonstrate that the amorphous/disordered regions within Sr(HE)O 3 ion tracks remain highly stable under electron irradiation, whereas tracks in SrTiO 3 readily recrystallize. This enhanced stability is attributed to the dominance of structural and chemical complexity arising from multiple B-site cations, which suppress defect migration and templated recrystallization driven by electronic excitations and local heating. Overall, this study highlights how high-entropy oxide chemistry fundamentally reshapes irradiation damage evolution, offering insights into defect formation and phase stability under extreme conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Half-life determination of heavy ions in a storage ring considering feeding and depleting background processes

Heavy-ion storage rings have relatively large momentum acceptance which allows for multiple ion species to circulate at the same time. This needs to be considered in radioactive decay measurements of highly charged ions, where atomic charge exchange reactions can significantly alter the intensities of parent and daughter ions. In this study, we investigate this effect using the decay curves of ion numbers in the recent 205 Tl 81+ bound-state beta decay experiment conducted using the Experimental Storage Ring at GSI Darmstadt. To understand the intricate dynamics of ion numbers, we present a set of differential equations that account for various atomic and nuclear reaction processes—bound state beta decay, atomic electron recombination and capture, and electron ionization. By incorporating appropriate boundary conditions, we develop a set of differential equations that accurately simulate the decay curves of various simultaneously stored ions in the storage ring: 205 Tl 81+ , 205 Pb 81+ , 205 Pb 82+ , 200 Hg 79+ , and 200 Hg 80+ . Through a quantitative comparison between simulations and experimental data, we provide insights into the detailed reaction mechanisms governing stored heavy ions within the storage ring. Our approach effectively models charge-changing processes, reduces the complexity of the experimental setup, and provides a simpler method for measuring the decay half-lives of highly charged ions in storage rings.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Nuclear Structure Studies for Schiff Moment Enhancement

One of the major open questions in modern physics is the origin of the matter-antimatter asymmetry observed in the universe. While the Standard Model contains sources of charge-parity (CP) violation, they appear insufficient to explain the observed dominance of matter over antimatter. As a result, searches for additional sources of CP violation are an important area of contemporary nuclear and particle physics. Atomic electric dipole moments (EDMs) provide sensitive probes of CP-violating interactions. In heavy nuclei, the observable atomic EDM can be enhanced through the presence of a nuclear Schiff moment, which arises from CP-violating nuclear forces and nuclear structure effects. The review paper Nuclear Schiff Moments and CP Violation by Jonathan Engel provides an overview of the theoretical framework connecting CP violation, nuclear structure, and Schiff moments. The long-term goal of this project is to contribute to the identification and characterization of nuclei that may exhibit enhanced Schiff moments. Such nuclei are often associated with strong octupole correlations or low-energy parity-doublet structures that can amplify CP-violating effects. This report summarizes progress made during the initial phase of the project, including a survey of candidate isotopes and preparation for nuclear-structure calculations using the HFODD code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Direct reactions with the AT-TPC

Direct reactions are crucial tools for accessing properties of the atomic nucleus. Fundamental and exotic phenomena such as collective modes, pairing, weakbinding effects and evolution of single-particles energies can be investigated in peripheral collisions between a heavy nucleus and a light target. The necessity of using inverse kinematics to reveal how these structural properties change with isospin imbalance renders direct reactions a challenging technique when using the missing mass method. In this scenario, Active Target Time Projection Chambers (AT-TPC) have demonstrated an outstanding performance in enabling these types of reactions even under conditions of very low beam intensities. The AT-TPC of the Facility for Rare Isotope Beams (FRIB) is a next generation multipurpose Active Target. When operated inside a solenoidal magnet, direct reactions benefit from the measurement of the magnetic rigidity that enables particle identification and the determination of the excitation energy with high resolution without the need of auxiliary detectors. Additionally, the AT-TPC can be coupled to a magnetic spectrometer improving even further its spectroscopic investigation capability. In this contribution, we discuss inelastic scattering and transfer reaction data obtained via the AT-TPC and compare them to theory. In particular, we present the results for the 14 C(p,p′) and 12 Be (p,d) 11 Be reactions. For 14 C, we compare the experimental excitation energy of the first 1 – excited state with coupled-cluster calculationsbased on nuclear interactions from chiral effective field theory and with available shell-model predictions. For 12 Be, we determine the theoretical spectroscopic factors of the 12 Be (p,d) 11 Be transfer reaction in the shell modeland compare them to the experimental excitation spectrum from a qualitative standpoint.

active target↗
DOE OSTI2026

AGR-5/6/7 Ceramography Report

The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program was established in 2002 to conduct research and development on tri-structural isotropic (TRISO)-coated particle fuel for High Temperature Gas-cooled Reactors (HTGRs). All AGR irradiations have been completed: AGR-1 (Collin 2015), AGR-2 (Collin 2014), AGR-3/4 (Collin 2016) and AGR-5/6/7 (Pham 2021). The objectives of each program are presented in Figure 1.1. The purpose of the AGR-5/6/7 program was to provide a baseline fuel qualification data set to support licensing, deployment, and operation of HTGRs in the United States. To achieve these goals, the program includes fuel fabrication, irradiations of TRISO fuels and high-temperature materials, safety testing and post-irradiation examination (PIE), fuel performance modeling, and fission product (FP) transport (Sharp 2020). The AGR-5/6/7 work continues as a final irradiation program of the Advanced Reactor Technologies (ART) program, that began in February 2018 and ended in July 2020. The AGR-5/6/7 fuel compacts were irradiated for a total of approximately 360.9 effective full power days (EFPDs) (Stempien 2023), resulting in final burn-up values, on a per-compact basis, ranging from 5.66% to 15.26% fissions per initial heavy metal atom (FIMA), and fast fluence values ranging from 1.62×1025 n/m2 to 5.55×1025 n/m2 (E >0.18 MeV) (Stempien 2022)

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Systems-To-Atoms (S2A): enabling hydrogen for climate security

The project addresses a critical gap in hydrogen infrastructure by integrating system-level energy models with atomic-scale material simulations in a unified Systems-to-Atoms (S2A) framework. The motivation stems from the need to develop efficient, cost-effective, and durable hydrogen transport and utilization technologies to support decarbonization of hard-to-electrify sectors such as heavy-duty transportation. Current system models lack awareness of material performance mechanisms, while material-scale models do not account for system-level usage and variability. To bridge this divide, the team developed a co-simulation capability linking techno-economic analyses, reactor/process-flow modeling, and molecular-scale catalysis simulations. Applied to hydrogen delivery in California, the framework enabled comparative evaluations of compressed, cryogenic, and liquid organic hydrogen carrier (LOHC) pathways, highlighting how catalyst operation and unit process efficiency influence overall performance. The results demonstrate that no single material or transport mode is universally optimal; instead, heterogeneous solutions tuned to specific operational contexts deliver better performance. The project delivers a new capability for cross-scale material co-design, advancing hydrogen infrastructure readiness and informing DOE and LLNL missions in climate and energy resilience.

organic↗
DOE OSTI2025

Flux effects in precipitation under irradiation simulation of Fe-Cr alloys

Radiation-enhanced precipitation of Cr-rich α’ in irradiated Fe-Cr alloys, which results in hardening and embrittlement, depends on the irradiating particle and the displacement per atom (dpa) rate. Here, we utilize a Cahn-Hilliard phase-field based approach, that includes simple models for nucleation, irradiating particle and rate dependent radiation-enhanced diffusion and cascade mixing to simulate α’ evolution under neutrons, heavy ions, and electron irradiations. Different irradiating particles manifest very different cascade mixing efficiencies. The model was calibrated using neutron data. For cascade inducing neutron/heavy-ion dpa rates at 300 °C between 10-8 and 10-6 dpa/s the model predicts approximately constant number density, decreasing radius, decreasing α’ Cr composition, and lower α’ volume fraction. The model then predicts a dramatic transition to no α’ formation above approximately 10-5 dpa/s, while electron irradiation, with weak mixing, had little effect at dpa rates up to 10-3 dpa/s. These model predictions are consistent with experiments. We explain the results in terms of the flux dependence of the radiation enhanced diffusion, cascade mixing, and their ratio, which all vary significantly in relevant flux ranges for neutron and cascade inducing ion irradiations. These results show that both cascade mixing and radiation enhanced diffusion must be accounted for when attempting to emulate neutron-irradiation effects using accelerated ion irradiations.

Ke, Jia-Hong↗
DOE OSTI2025

Jump-Start U.S. Manufacturing of High-Performance Permanent Magnets

Gas atomized feedstock powders for Nd-Fe-B based magnets are more robust and cost effective than the strip-cast sheet currently used as feedstock for milling by the magnet industry. However, gas atomized powder’s crystallinity and grain boundary phases are less ideal than the strip cast flake. We proposed to optimize the atomization process as well as the powder chemistry to address this issue and to eliminate heavy rare earth elements from these magnet alloys. Our goal is to help GKN-Hoeganaes, a US metal powder company, who used to make Nd-Fe-B magnets, to bring back US manufacturing of these high energy density permanent magnets.

36 MATERIALS SCIENCE↗