The Essence and Efficiency Limits of Bulk-Heterostructure Organic Solar Cells: A Polymer-to-Panel Perspective
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
We systematically investigated the microstructural evolution of heteroepitaxial SrTiO{sub 3} (STO) thin films grown on a single crystal LaAlO{sub 3} (LAO) (001) substrate, focusing on the response of the STO/LAO interface to Ne{sup 2+} irradiation at room temperature. Cross sectional transmission electron microscope (TEM) analysis reveals that the LAO crystal amorphizes first after a relatively low dose of damage followed by the amorphization of the STO film after irradiation to a higher dose. While the critical dose to amorphize differs between each material, amorphization begins at the interface and proceeds outward in both cases. Thus, a crystalline/amorphous interface first forms at the STO/LAO interface by a dose of 1 dpa, and then an amorphous/amorphous interface forms when the dose reaches 3 dpa. Scanning TEM and x-ray energy dispersive spectroscopy indicate no significant heavy cation elemental diffusion, though electron energy loss spectroscopy reveals a redistribution of oxygen across the film/substrate interface after Ne{sup 2+} irradiation. Atomistic calculations are used to interpret the experimental findings in terms of the defect properties in each of the two component phases.
Experimental verification of the microscopic origin of resistance switching in metal/oxide/metal heterostructures is needed for applications in non-volatile memory and neuromorphic computing. Numerous reports suggest that resistance switching in NiO is caused by local reduction of the oxide layer into nanoscale conducting filaments, but few reports have shown experimental evidence correlating electroforming with site-specific changes in composition. We have investigated the mechanisms of reversible and irreversible electroforming in 250–500 nm wide pillars patterned from a single Ta/Ti/Pt/Ti-doped NiO/Pt/Ta heterostructure and have shown that these can coexist within a single sample. We performed in situ transmission electron microscopy (TEM) electroform- ing and switching on each pillar to correlate the local electron transport behavior with microstructure and composition in each pillar. DFT calculations fitted to electron energy loss spectroscopy data showed that the Ti-doped NiO layer is partially reduced after reversible electroforming, with the formation of oxygen vacancies ordered into lines in the <110> direction. However, under the same probing conditions, adjacent pillars show irreversible electroforming caused by electromigration of metallic Ta to form a single bridge across the oxide layer. We propose that the different electroforming behaviors are related to microstructural variations across the sample and may lead to switching variability.
Many complex oxides display an array of structural instabilities often tied to altered electronic behavior. For oxide heterostructures, several different interfacial effects can dramatically change the nature of these instabilities. Here, we investigate LaAlO{sub 3}/SrTiO{sub 3} (001) heterostructures using synchrotron x-ray scattering. We find that when cooling from high temperature, LaAlO{sub 3} transforms from the Pm3{sup ¯}m to the Imma phase due to strain. Furthermore, the first 4 unit cells of the film adjacent to the substrate exhibit a gradient in rotation angle that can couple with polar displacements in films thinner than that necessary for 2D electron gas formation.
We report significant advances in understanding and reducing nonradiative Shockley-Read-Hall recombination in polycrystalline CdSe x Te 1-x , leading to microsecond charge carrier lifetimes. In undoped Al 2 O 3 -passivated heterostructures we find external radiative efficiency 0.2%, quasi-Fermi level splitting 950 mV, mobility 100 cm 2 /(Vs), and diffusion length 14 µm. In solar cells measured lifetimes can exceed 1 µs. We interpret this data to indicate MgZnO/CdSeTe interface recombination velocity <; 100 cm/s. Based on our results, it appears CdTe PV technology has potentially overcome longstanding “recombination lifetime” limitation and in the near future will transition to improving other aspects of device design.
In this paper, we present theoretically that the thermoelectric figure of merit for a semiconductor material with a small band gap can be significantly enhanced near the intrinsic doping regime at high temperatures via the suppression of bipolar thermal conductivity when the minority carriers are selectively blocked by heterostructure barriers. This scheme is particularly effective in nanostructured materials where the lattice thermal conductivity is lowered by increased phonon scatterings at the boundaries, so that the electronic thermal conductivity including the bipolar term is limiting the figure of merit $zT$. We show that $zT$ can be enhanced to above 3 for p-type PbTe, and above 2 for n-type PbTe at 900 K with minority carrier blocking, when the lattice thermal conductivity is as low as 0.3 W/m K.
We use planar metamaterial resonators to enhance, by more than two orders of magnitude, the optical second harmonic generation, in the near infrared, obtained from intersubband transitions in III-Nitride heterostructures. The improvement arises from two factors: employing an asymmetric double quantum well design and aligning the resonators’ cross-polarized resonances with the intersubband transition energies. The resulting nonlinear metamaterial operates at wavelengths where single photon detection is available, and represents a new class of sources for quantum photonics related phenomena.
Uniaxial strain has been widely used as a powerful tool for investigating and controlling the properties of quantum materials. However, existing strain techniques have so far mostly been limited to use with bulk crystals. Although recent progress has been made in extending the application of strain to two-dimensional van der Waals (vdW) heterostructures, these techniques have been limited to optical characterization and extremely simple electrical device geometries. Here, we report a piezoelectric-based in situ uniaxial strain technique enabling simultaneous electrical transport and optical spectroscopy characterization of dual-gated vdW heterostructure devices. Critically, our technique remains compatible with vdW heterostructure devices of arbitrary complexity fabricated on conventional silicon/silicon dioxide wafer substrates. We demonstrate a large and continuously tunable strain of up to –0.15% at millikelvin temperatures, with larger strain values also likely achievable. We quantify the strain transmission from the silicon wafer to the vdW heterostructure, and further demonstrate the ability of strain to modify the electronic properties of twisted bilayer graphene. Our technique provides a highly versatile new method for exploring the effect of uniaxial strain on both the electrical and optical properties of vdW heterostructures and can be easily extended to include additional characterization techniques.
The highly coherent and tightly focused x-ray beams produced by hard x-ray light sources enable the nanoscale characterization of the structure of electronic materials but are accompanied by significant challenges in the interpretation of diffraction and scattering patterns. X-ray nanobeams exhibit optical coherence combined with a large angular divergence introduced by the x-ray focusing optics. The scattering of nanofocused x-ray beams from intricate semiconductor heterostructures produces a complex distribution of scattered intensity. We report here an extension of coherent x-ray optical simulations of convergent x-ray beam diffraction patterns to arbitrary x-ray incident angles to allow the nanobeam diffraction patterns of complex heterostructures to be simulated faithfully. These methods are used to extract the misorientation of lattice planes and the strain of individual layers from synchrotron x-ray nanobeam diffraction patterns of Si/SiGe heterostructures relevant to applications in quantum electronic devices. The systematic interpretation of nanobeam diffraction patterns from semiconductor heterostructures presents a new opportunity in characterizing and ultimately designing electronic materials.
Modulation doping is one of the strategies to improve thermoelectric power factors of nanocomposites and thin-film bilayered heterostructures by effectively increasing electrical conductivity. Here, it is reported that thin-film heterostructures of heavily doped p-type organic conducting polymer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and undoped thin-film Ge can enhance thermoelectric power factor by modulation doping. The maximum power factor and Seebeck coefficient of the bilayered heterostructures are 154 µW m -1 K -2 and 398 µV K -1 , respectively, corresponding to 47-fold and 41-fold increases compared to those of bulk PEDOT:PSS and 64-fold increase compared to power factor of undoped Ge. The enhancements in power factor and Seebeck coefficient are quantitatively described by the hole transfer from PEDOT:PSS to Ge, which takes into account the band alignment at the interface detected by Kraut's method. Agreement between the simulation and experiment results also implies predictability of thermoelectric performances of nanoscale bilayered heterostructures in general, when band offset, Fermi level, and individual electronic properties are available. This work can be further extended to predict performance of other nanoscale combinations of thermoelectric and other electronic materials in general.
Localized surface plasmon resonance (LSPR) in semiconductor nanocrystals is a relatively new field of investigation that promises greater tunability of plasmonic properties compared to metal nanoparticles. A novel process by which the LSPR in semiconductor nanocrystals can be altered is through heterostructure formation arising from solution-based cation exchange. Herein, we describe the development of an analytical model of LSPR in heterostructure copper sulfide-zinc sulfide nanocrystals synthesized via a cation exchange reaction between copper sulfide (Cu 1.81 S) nanocrystals and Zn ions. The cation exchange reaction produces dual-interface, heterostructure nanocrystals in which the geometry of the copper sulfide phase can be tuned from a sphere to a thin disk separating symmetrically-grown sulfide (ZnS) grains. Drude model electronic conduction and Mie-Gans theory are applied to describe how the LSPR wavelength changes during cation exchange, taking into account the morphology evolution and changes to the local permittivity. The results of the modeling indicate that the presence of the ZnS grains has a significant effect on the out-of-plane LSPR mode. By comparing the results of the model to previous studies on solid-solid phase transformations of copper sulfide in these nanocrystals during cation exchange, we show that the carrier concentration is independent of the copper vacancy concentration dictated by its atomic phase. The evolution of the effective carrier concentration calculated from the model suggests that the out-of-plane resonance mode is dominant. The classical model was compared to a simplified quantum mechanical model which suggested that quantum mechanical effects become significant when the characteristic size is less than ~8 nm. Overall, we find that the analytical models are not accurate for these heterostructured semiconductor nanocrystals, indicating the need for new model development for this emerging field.
Emergent quantum phenomena in electronically coupled two-dimensional heterostructures are central to next-generation optical, electronic, and quantum information applications. Tailoring electronic band gaps in coupled heterostructures would permit control of such phenomena and is the subject of significant research interest. Two-dimensional polymers (2DPs) offer a compelling route to tailored band structures through the selection of molecular constituents. However, despite the promise of synthetic flexibility and electronic design, fabrication of 2DPs that form electronically coupled 2D heterostructures remains an outstanding challenge. Here, we report the rational design and optimized synthesis of electronically coupled semiconducting 2DP/2D transition metal dichalcogenide van der Waals heterostructures, demonstrate direct exfoliation of the highly crystalline and oriented 2DP films down to a few nanometers, and present the first thickness-dependent study of 2DP/MoS 2 heterostructures. In this work, control over the 2DP layers reveals enhancement of the 2DP photoluminescence by two orders of magnitude in ultrathin sheets and an unexpected thickness-dependent modulation of the ultrafast excited state dynamics in the 2DP/MoS 2 heterostructure. These results provide fundamental insight into the electronic structure of 2DPs and present a route to tune emergent quantum phenomena in 2DP hybrid van der Waals heterostructures.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Abstract not provided