Search NASA⌕ Search

SEARCH · Search NASA

Results for “high-Tc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Synthesis of Mg2IrH5: A potential pathway to high-Tc hydride superconductivity at ambient pressure

Following long-standing predictions associated with hydrogen, high-temperature superconductivity has recently been observed in several hydride-based materials. Nevertheless, these high-Tc phases only exist at extremely high pressures, and achieving high transition temperatures at ambient pressure remains a major challenge. Recent predictions of the complex hydride Mg2IrH6 may help overcome this challenge with calculations of high-Tc superconductivity (65K

High-temperature superconductors↗
NASA NTRS1988

Effect of processing parameters on the characteristics of high-Tc superconductor YBa2Cu3Oy

SEM, thermogravimetric analysis, powder X-ray diffraction,and measurements of electrical resistivity and magnetic susceptibility, are presently used to characterize the influence of sintering temperature, sintering and annealing atmospheres, and quench-rate on the properties of the YBa2Cu3Oy superconducting oxide. It is established that annealing in oxygen, together with slow cooling rates, are required for preparation of high-Tc superconductors with sharp transitions; rapid quenching from high temperature does not yield good superconductors, due to low oxygen content.

Bansal, Narottam P.↗
NASA NTRS1989

Synthesis and characterization of high-Tc superconductors in the Tl-Ca-Ba-Cu-O system

Both Tl2Ca2Ba2Cu3O10 and TlCa3BaCu3O8.5 are investigated for superconductivity as a function of the sintering temperature, time, atmosphere, and quench rate in an effort to synthesize the high-Tc superconducting phase in the thallium system. The samples are characterized by electrical resistivity measurements, X-ray diffraction, and scanning electron microscopy. Samples of starting composition Tl2Ca2Ba2Cu3O10 fired in air at 860-900 C and rapidly quenched show a Tc of 96-107 K. In contrast, specimens of starting composition TlCa3BaCu3O8.5 when baked at 900 C and slowly cooled in oxygen superconduct at 116 K and above and consist of Tl2Ca2Ba2Cu3O(10+x) as the dominant phase. The results also show that, in contrast to the case of YBa2Cu3O(7-x), doping with a small concentration of fluorine sharpens the resistive transition and produces a large Tc increase in thallium-based superconductors.

Bansal, Narottam P.↗
NASA NTRS1988

Superconductivity in the high-Tc Bi-Ca-Sr-Cu-O system - Phase identification

Four phases are observed in superconducting Bi-Ca-Sr-Cu-O samples. The superconducting phase, with onset temperature near 120 K, is a 15.4-A-layered compound with composition near Bi2Ca1Sr2Cu2O9 and an A-centered orthorhombic unit subcell 5.41 x 5.44 x 30.78 A. X-ray diffraction and electron microscopy data are consistent with a structure of alternating perovskite and Bi2O2 layers. High-resolution transmission electron microscopy images reveal a b-axis superstructure of 27.2 A, numerous (001) stacking faults, and other defects.

Hazen, R. M.↗
NASA NTRS1988

Crystallography, chemistry and structural disorder in the new high-Tc Bi-Ca-Sr-Cu-O superconductor

Diffraction experiments are reported which indicate that the new Bi-Ca-Sr-Cu-O layer-structure superconductor possesses a primitive orthorhombic unit cell with probable space group Pnnn. The material exhibits severe structural disorder which is primarily related to stacking within the layers. The apparent orthorhombic structure is an average resulting from orthorhombic material mixed with monoclinic domains in two twinned orientations. Two distinct types of structural disorder that are common in materials synthesized to date are also described. This disorder complicates the crystallographic analysis and suggests that X-ray and neutron diffraction methods may yield only an average structure.

Veblen, D. R.↗
NASA NTRS1988

Systematic variation of magnetic-field penetration depth in high-Tc superconductors studied by muon-spin relaxation

The muon relaxation rate (sigma) was measured in the high critical temperature superconductors YBa2Cu3O(x) for x = 6.66, 6.95, 7.0, and La1.85 SrO.15 CuO4 in transverse external magnetic fields 1 is approximately 4 kG. A simple relation is found which connects the transition temperature T(c), the magnetic field penetration depth lambda(L), the carrier concentration n(s) and the effective mass m* as T(c) varies as sigma which varies as 1/lambda(L) squared which varies as n(s)/m*. The linear dependence T(c) varies as n(s)/m* suggests a high energy scale for the coupling between superconducting carriers.

Uemura, Y. J.↗
DOE OSTI2026

A high-efficiency cryogenic neutron spin flipper for IMAGINE-X at the high flux isotope reactor

The Laue neutron macromolecular crystallography beamline, IMAGINE, at the High Flux Isotope Reactor (HFIR) is undergoing a major upgrade to incorporate the dynamic nuclear polarization (DNP) technique. Upon completion, the new IMAGINE-X instrument is expected to enhance the signal-to-noise ratio of the diffraction data by an order of magnitude. To take full advantage of the benefits of DNP, both a highly polarized neutron beam and a high-efficiency neutron spin flipper are required. We have developed a compact cryogenic spin flipper utilizing the Meissner effect in high-Tc yttrium–barium–copper–oxide superconducting films. The flipper has been successfully tested at two HFIR neutron development beamlines, Larmor and Poplar, with neutron wavelengths of 5.3 and 2.4 Å respectively. At Larmor, a flipping efficiency of 0.995 ± 0.004 was achieved for 5.3 Å neutrons, and at Poplar, efficiency of up to 0.9987 ± 0.0004 was obtained for 2.4 Å neutrons. Both tests demonstrated the flipper’s excellent performance and suitability for integration into IMAGINE-X.

Fu, Sichao [Oak Ridge National Laboratory (ORNL), ↗
DOE OSTI2026

Superconductivity in Ruddlesden–Popper nickelates: a review of recent progress, focusing on thin films

The discovery of superconductivity with Tc ∼ 80 K in the nickelate Ruddlesden-Popper bilayer La3Ni2O7 at high pressure has opened a new platform for unconventional superconductivity, followed by the subsequent observation of superconductivity in trilayer La4Ni3O10, also at high pressure. Remarkably, ambient-pressure superconductivity was also observed recently in La3Ni2O7 ultra-thin films when grown on substrates that provide compressive strain. This discovery significantly extends the type of experimental techniques that can be used in nickelates, previously limited due to the high-pressure constraint. Discussing the similarities and differences among these nickel oxides will provide new insights into understanding the mechanism of high-Tc superconductivity in correlated electron systems. In this paper, we review the experimental and theoretical progress on Ruddlesden–Popper nickelates, with emphasis on thin films, and discuss future perspectives and research directions.

Zhang, Yang [ORNL] (ORCID:0000000336235883)↗
DOE OSTI2025

Synthesis and electronic characterization of Nd2−xSrxNiO4 thin films (0≤x≤1.4)

Layered nickelates have been studied extensively over the last three decades due to their structural similarities to the high-Tc superconducting cuprates. Using reactive oxide molecular beam epitaxy (MBE), we synthesize Nd2−xSrxNiO4 thin films for x=0−1.4 to probe the properties and electronic structure as a function of hole doping. The samples with lower doping show semiconducting behavior across the temperatures probed with an onset of metallic conductivity at x=1.4. We also present polarization-dependent O K and Ni L2,3 x-ray absorption spectra to track the evolution of the oxygen-nickel hybridization, distribution of holes between O 2p and Ni 3d states and the nickel oxidation state across the series. Angle-resolved photoemission spectroscopy (ARPES) measurements reveal a Fermi surface that comprises a cupratelike hole pocket of dx2−y2 character with an additional electron pocket of d3z2−r2 character at Γ. The emergence of a quasiparticle peak at the Fermi vector for x=1.4 corroborates the insulator-to-metal transition at x∼1. Finally, observe a fully two-dimensional Fermi surface with no momentum-dependent pseudogap, in contrast to measurements of the related bulk compound, Eu0.9Sr1.1NiO4.

Taylor, Nicole K↗
NASA NTRS1987

Magnetic field penetration depth of La(1.85)Sr(0.15)CuO4 measured by muon spin relaxation

Muon-spin-relaxation measurements have been performed on a high-Tc superconductor La(1.85)Sr(0.15)CuO4. In an external transverse magnetic field of 500 G, a magnetic field penetration depth of 2000 A at T = 10 K has been determined from the muon-spin-relaxation rate which increased with decreasing temperature below Tc. From this depth and the Pauli susceptibility, the superconducting carrier density is estimated at 3 x 10 to the 21st per cu cm. The zero-field relaxation rates above and below Tc were equal, which suggests that the superconducting state in this sample is not associated with detectable static magnetic ordering.

Kossler, W. J.↗
NASA NTRS1988

Space power technology to meet civil space requirements

The current status of NASA R&D programs for space power systems is reviewed and illustrated with drawings and diagrams. Topics addressed include photovoltaic systems, energy-storage technology, solar-dynamic systems, the SP-100 Advanced Technology Program, Stirling engine technology, and thermal management. Consideration is given to power management and distribution, power-system autonomy, high-Tc superconductor technology, space power materials, and environmental interactions.

Vanlandingham, Earl↗
NASA NTRS1988

Nonaqueous chemical etch for YBa2Cu3O(7-x)

A nonaqueous chemical etch, with Br as the active ingredient, is described which removes the insulating hydroxides and carbonates that form on high-temperature superconductor surfaces as a result of atmospheric exposure. X-ray photoemission spectra have been recorded before and after etching YBa2Cu3O(7-x) films. It is found that, after the etch, the high binding energy O 1s and Ba 3d peaks associated with surface contaminants are greatly reduced, the Y:Ba:Cu ratio is close to the expected 1:2:3, and the oxidation state of the Cu(2+) is not affected. The resistance of an etched film reaches zero at 78 K, compared to 81 K for a similar unetched film. The suitability of other nonaqueous halogen-based etches is discussed, as is the applicability of this etch to other high-Tc superconductors.

Vasquez, R. P.↗
NASA NTRS1989

An adiabatic demagnetization refrigerator for SIRTF

An adiabatic demagnetization refrigerator (ADR) has been proposed to cool bolometric infrared detectors on the multiband imaging photometer of the Space Infrared Telescope Facility (SIRTF). One such refrigerator has been built which uses a ferric ammonium alum salt pill suspended by nylon threads in a 3-T solenoid. The resonant modes of this suspension are above 100 Hz. The heat leak to the salt pill is less than 0.5 microW. The system has a hold time at 0.1K of more than 12 h. The cold stage temperature is regulated with a feedback loop that controls the magnetic field. A second, similar refrigerator is being built at a SIRTF prototype to fly on a ballon-borne telescope. It will use a ferromagnetic shield. The possibility of using a high-Tc solenoid-actuated heat switch is also discussed.

Timbie, P. T.↗
NASA NTRS1989

Construction and performance of a high-temperature-superconductor composite bolometer

A high-Tc superconducting bolometer has been constructed using a YBa2Cu3O(x) thin-film meander line 20 microns wide and 76,000 microns long, deposited on a SrTiO3 substrate. Radiation is absorbed by a thin film of Bi with well-characterized absorption properties deposited on a Si substrate in contact with the SrTiO3. At 1.8 Hz the measured bolometer response to a 500-K blackbody is 5.2 V/W (820 V/W extrapolated to dc). The impact of apparent nonohmic behavior at the transition is discussed, as are ways of reducing the observed 1/f noise. The response time is 32 s and is dominated by the heat capacity of the SrTiO3 substrate.

Brasunas, J. C.↗
NASA NTRS1989

Processing and properties of high Tc oxide/silver matrix composite superconductors

This paper describes the processing conditions for the formation of strong flux pinning high-Tc (REE)1Ba2Cu3O7/AgO (RE-123/AgO) composites with the RE-123:AgO ratio of 3:1 and presents the magnetization and critical field data on these composites. The results obtained indicate that proper processing conditions are critical to the formation of strong flux pinning RE-123/AgO composites. Resistance measurements in a magnetic field show that the upper critical field in Y-123/AgO is about three times larger than that of the Y-123 compound.

Curreri, P. A.↗
NASA NTRS1990

Microwave characterization of high-temperature superconducting thin films using stripline resonators

A method was derived for the extraction of the surface resistivity (Rs) of high-Tc superconducting (HTS) thin films at microwave frequencies, using a stripline resonator circuit. Surface resistivity values were calculated by measuring the difference in Q-values of a stripline resonator configuration when an HTS thin film was substituted for one of the metallic ground planes. Cryogenic tests were completed for several stripline resonator structures, yielding accurate predictions of the HTS thin-film performance at frequencies between 3 and 26 GHz (in harmonics of approximately 3 GHz). These results were then used to illustrate the dependence of HTS surface resistivity on frequency and temperature in the microwave frequency band.

Macdonald, Alan D.↗