Search NASA⌕ Search

SEARCH · Search NASA

Results for “homojunction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

SnS Homojunction Solar Cell with n-Type Single Crystal and p-Type Thin Film

Herein, a pn homojunction SnS solar cell is fabricated for the first time by the deposition of p-type SnS polycrystalline thin films on the recently reported large n-type SnS single crystals. The p-type thin films consist of columnar grains that grow along the <100> direction, which is the same orientation as the n-type single crystal. In addition, the interface of the pn homojunctions is void-free and compositionally sharp. The SnS homojunction solar cell achieves an open-circuit voltage (VOC) of 360 mV, which is as large as the highest VOC of previously reported SnS-based heterojunction solar cells. The built-in potential of the homojunction cell is 0.92 eV, which is close to the bandgap energy of SnS (≈1.1 eV), and larger than reported for heterojunctions (≈0.7 eV). The resulting 1.4% conversion efficiency (n) of the homojunction solar cell is smaller than the record 4–5% in heterojunctions, mainly due to the low short-circuit current density (J SC ) of 7.5 mA cm -2 . Once the device structure of the homojunction cell is optimized to efficiently collect the photogenerated carriers and achieve a comparable J SC as the conventional heterojunction cells (≈25 mA cm -2 ), high n exceeding 4–5% will be realized with improving the VOC.

14 SOLAR ENERGY↗
DOE OSTI2021

Phase-enabled metal-organic framework homojunction for highly selective CO 2 photoreduction

Conversion of clean solar energy to chemical fuels is one of the promising and up-and-coming applications of metal–organic frameworks. However, fast recombination of photogenerated charge carriers in these frameworks remains the most significant limitation for their photocatalytic application. Although the construction of homojunctions is a promising solution, it remains very challenging to synthesize them. Herein, we report a well-defined hierarchical homojunction based on metal–organic frameworks via a facile one-pot synthesis route directed by hollow transition metal nanoparticles. The homojunction is enabled by two concentric stacked nanoplates with slightly different crystal phases. The enhanced charge separation in the homojunction was visualized by in-situ surface photovoltage microscopy. Moreover, the as-prepared nanostacks displayed a visible-light-driven carbon dioxide reduction with very high carbon monooxide selectivity, and excellent stability. Our work provides a powerful platform to synthesize capable metal–organic framework complexes and sheds light on the hierarchical structure-function relationships of metal–organic frameworks.

14 SOLAR ENERGY↗
DOE OSTI2022

n-Type doping of a solution processed p-type semiconductor using isoelectronic surface dopants for homojunction fabrication

The p-n junction is one of the fundamental requirements for a practical semiconductor-based electronic device. Designing a heterojunction comprising of dissimilar p-type and n-type semiconductors calls for careful energy level considerations, both when selecting the semiconductor materials as well as the metal contacts. A homojunction based on a single semiconductor simplifies this task, as energy levels of the p-type and n-type materials are already fairly similar, allowing for easier selection of contacts. Traditionally, homojunctions rely on doping of a bulk semiconductor to achieve p- and n-type transport through controlled addition of aliovalent dopants via energy-intensive processes such as ion implantation or thermal annealing. Exact control of doping in nanocrystalline semiconductors is significantly more challenging, due to self-purification effects. However, owing to their large surface areas, surface moieties can be utilized to both dope the nanostructures as well as tune their energy levels. Here, we present a facile technique based on an isoelectronic surface dopant in order to achieve p- and n-type materials based on the same semiconductor. We show that thin p-type colloidal Bi 2 Te 3 nanowires can be switched to n-type through surface functionalization, thus increasing the availability of new nanocrystalline solution-processable p-n homojunctions.

42 ENGINEERING↗
DOE OSTI2022

Developing CdTe homojunctions applying high throughput deposition

In this project, we attempted to make CdTe homojunctions using single crystal p-type doped substrates and closed-space sublimation epitaxy (CSSE) n-type doped films. The project included modeling which determined the ideal thickness for the n-type layer as being <200 nm. Boules of high concentration indium-doped CdTe and CdSe 0.4 Te 0.6 (CST) were grown using modified vertical Bridgman (MVB) methods. Similarly, iodine-doped CdTe crystals were grown for the first time. Washington State University (WSU) stock phosphorus-doped CdTe was used as the p-type substrate layer. The crystals were characterized by Hall effect and time-resolved photoluminescence (TRPL, for electrical properties), photoluminescence microscopy (for uniformity), X-ray diffraction (for crystal structure), and glow discharge mass spectrometry (GDMS, for dopant and impurity concentration). CdTe:I crystals were also characterized by visible and infrared transmission measurements, and various Cd or Te heat treatments were performed to assess changes in optical and electrical properties. The grown n-type materials – CdTe:In, CdSe0.4Te0.6:In, and CdTe:I – were provided to the National Renewable Energy Laboratory (NREL) for growth of CSSE thick films for characterization by two photon TRPL (for carrier lifetime), electron back-scatter diffraction (EBSD, to assess epitaxy), and Hall effect. Several measurements of secondary ion mass spectroscopy (SIMS) were performed. Nearly 100% of the indium from the crystal was incorporated into the measured thick films, while only ~2-22% of the iodine from the crystal was incorporated. The net result of the diffusion issue is that homojunction devices created using CSSE have a buried homojunction, as indicated by the near infrared peak in the external quantum efficiency (EQE). Various parameterization of front and back contacts suggested that the poor device performance was primarily a result of this buried junction and not due to other effects. There may also be an issue with the CSSE film lifetime in addition to the dopant profile.

14 SOLAR ENERGY↗
DOE OSTI2025

Pseudotunnel Magnetoresistance in Twisted van der Waals Fe 3 GeTe 2 Homojunctions

Abstract Twistronics, a novel engineering approach involving the alignment of van der Waals (vdW) integrated two‐dimensional materials at specific angles, has recently attracted significant attention. Novel nontrivial phenomena have been demonstrated in twisted vdW junctions (the so‐called magic angle), such as unconventional superconductivity, topological phases, and magnetism. However, there have been only few reports on integrated vdW layers with large twist angles θ t , such as twisted interfacial Josephson junctions using high‐temperature superconductors. Herein, vdW homojunctions of the thin‐magnetic flakes, Fe 3 GeTe 2 (FGT), with large θ t ranging from 0° to 90°, without inserting any tunnel barriers are assembled. Nevertheless, these vdW homojunctions exhibit tunnel‐magnetoresistance (TMR) like behavior (pseudo‐TMR (PTMR) effect) with the ratios highly sensitive to the θ t values, revealing that the vdW gap at the junction interface between the twisted FGT layers behaves like a tunnel barrier and the θ t serves a control parameter for PTMR by drastically varying magnitudes of the lattice‐mismatch and the subsequent appearance of antiferromagnetic (AFM) spin alignment. First‐principles calculations considering vacuum gaps indicate strong dependence of TMR on the θ t driven by the sixfold screw rotational symmetry of bulk FGT. The present homojunctions hold promise as a platform for novel AFM spin‐dependent phenomena and spintronic applications.

Obata, Reiji [Faculty of Science and Engineering A↗
DOE OSTI2020

Fully Transparent GaN Homojunction Tunnel Junction-Enabled Cascaded Blue LEDs.

A sidewall activation process was optimized for buried magnesium-doped p-GaN layers yielding a significant reduction in tunnel junction-enabled light emitting diode (LED) forward voltage. This buried activation enabled the realization of cascaded blue LEDs with fully transparent GaN homojunction tunnel junctions. The initial optimization of buried p-GaN activation was performed on PN junctions grown by metal organic chemical vapor deposition (MOCVD) buried under hybrid tunnel junctions grown by MOCVD and molecular beam epitaxy. Next the activation process was implemented in cascaded blue LEDs emitting at 450 nm, which were enabled by fully transparent GaN homojunction tunnel junctions. The tunnel junction-enabled multi-active region blue LEDs were grown monolithically by MOCVD. This work demonstrates a state-of-the-art tunnel junction-enabled cascaded LED utilizing homojunction tunnel junctions which do not contain any heterojunction interface.

42 ENGINEERING↗
DOE OSTI2024

Work Function Tuning of a Weak Adhesion Homojunction for Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have demonstrated a comparable efficiency to Si-based cells. However, the buried interface with weak adhesion remains a critical issue since the ion migration enhanced by the built-in electric field at this interface might lead to instability. We report here that adjusting the energy-level alignment at the weak adhesion homojunction interface can mitigate ion migration and thereby enhance the stability and photovoltaic performance of PSCs. Functional molecules with self-assembled monolayer characteristics were introduced to the surface of the SnO2 layer using silane derivatives, which tuned the work function of the homojunction depending on the functional groups in the molecules and thereby significantly reduced the built-in electric field. The PSC exhibited a power conversion efficiency (PCE) of 25.3%. The maximum power point (MPP) tracking under continuous illumination confirmed that the device retained more than 97% of its initial PCE, even after 1,000 h.

homojunction↗
DOE OSTI2024

Free-Charge Carrier Generation in Homojunction Non-Polymeric Organic Semiconductor Films - The Role of the Optical Frequency Dielectric Constant

Engineering the dielectric constant (..epsilon..) to lower the exciton binding energy of the light-absorbing semiconductor can improve organic photovoltaic (OPV) device performance. Here, a series of materials are reported with 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (INCN) acceptor end groups and a central glycolated bis(4H-cyclopenta[2,1-b:3,4-b']dithiophene) unit with large low-frequency (..epsilon..lf = 7.4-7.9 at 0.1-0.2 MHz) and optical-frequency (..epsilon..opt up to 6.6 at 2 x 1014 Hz) dielectric constants. The INCN end groups differed in whether they were protonated, chlorinated, or fluorinated, with the latter having the highest ..epsilon..opt. An ..epsilon..opt of 6.6 is predicted to lead to a low exciton binding energy of ~0.04 eV. Time-resolved microwave conductivity measurements showed a temperature-dependent yield-mobility product, with it increasing linearly from 340 K. The onset temperature was near that required to overcome the calculated exciton binding energy and indicates increased free charge generation in a homojunction film. Room temperature transient absorption spectroscopy revealed that photoexcitation rapidly converted to a lower energy state that was consistent with the formation of polarons or a charge transfer state. This work provides experimental evidence of the importance of ..epsilon..opt for the generation of free charges, and a strategy for development of efficient single chromophore homojunction OPV devices.

charge generation↗
DOE OSTI2021

Direct observation of negative differential resistance in WS2 homojunction

Vertical tunneling junctions showing negative differential resistance (NDR) are realized in WS2 homojunction devices. Mono-/multilayered single crystalline WS2 is grown using chemical vapor deposition. NDR is observed through resonant tunneling in Au/bi-layer WS2/Au and Pt/few-layered WS2/Au tunneling junctions by back-gating at room temperature. While two-dimensional materials have been a central focus of materials research during the past decade, exploiting novel properties in diverse layers of these materials is emerging with new designs for electronic devices. Our results pave the way for novel resonant tunneling devices presenting a route to fabricate homojunction WS2 with simple fabrication techniques.

Hsu, Bo (ORCID:0000000201714211)↗
DOE OSTI2022

Powerful Organic Molecular Oxidants and Reductants Enable Ambipolar Injection in a Large-Gap Organic Homojunction Diode

Doping has proven to be a critical tool for enhancing the performance of organic semiconductors in devices like organic light-emitting diodes. However, the challenge in working with high-ionization-energy (IE) organic semiconductors is to find p-dopants with correspondingly high electron affinity (EA) that will improve the conductivity and charge carrier transport in a film. Here, we use an oxidant that has been recently recognized to be a very strong p-type dopant, hexacyano-1,2,3-trimethylene-cyclopropane (CN6-CP). The EA of CN6-CP has been previously estimated via cyclic voltammetry to be 5.87 eV, almost 300 meV higher than other known high-EA organic molecular oxidants. We measure the frontier orbitals of CN6-CP using ultraviolet and inverse photoemission spectroscopy techniques and confirm a high EA value of 5.88 eV in the condensed phase. The introduction of CN6-CP in a film of large-band-gap, large-IE phenyldi(pyren-1-yl)phosphine oxide (POPy 2 ) leads to a significant shift of the Fermi level toward the highest occupied molecular orbital and a 2 orders of magnitude increase in conductivity. Using CN6-CP and n-dopant (pentamethylcyclopentadienyl)(1,3,5-trimethylbenzene)ruthenium (RuCp*Mes)2, we fabricate a POPy 2 -based rectifying p–i–n homojunction diode with a 2.9 V built-in potential. Blue light emission is achieved under forward bias. Furthermore, this effect demonstrates the dopant-enabled hole injection from the CN6-CP-doped layer and electron injection from the (RuCp*Mes) 2 -doped layer in the diode.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantized electronic transitions in electrodeposited copper indium selenide nanocrystalline homojunctions

Pairing semiconductors with electrochemical processing offers an untapped opportunity to create novel nanostructures for practical devices. Here we report the results of one such pairing: the in-situ formation of highly-doped, interface-matched, sharp nanocrystalline homojunctions (NHJs) with single step electrodeposition of two copper-indium-selenide (CISe) compounds on flexible foil. It produces a homogenous film, comprising inherently ordered, 3-dimensional interconnected network of pn -CISe NHJs. These CISe NHJs exhibit surprising non-linear emissions, quantized transitions, large carrier mobility, low trap-state-density, long carrier lifetime and possible up-conversion. They facilitate efficient separation of minority carriers, reduce recombination and essentially function like quantum materials. This approach mitigates the material issues and complex fabrication of incumbent nanoscale heterojunctions; it also overcomes the flexibility and scale-up challenges of conventional planar pn junctions. The self-stabilized CISe NHJ film can be roll-to-roll processed in ambient atmosphere, thus providing a promising platform for a range of optoelectronic technologies. This concept exemplified by CISe compounds can be adapted to create nano-scale pn junctions with other inorganic semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Van der Waals Nanowires with Continuously Variable Interlayer Twist and Twist Homojunctions

Abstract Moiré patterns at van der Waals interfaces between twisted 2D crystals give rise to distinct optoelectronic excitations, as well as, narrowly dispersive bands responsible for correlated electron phenomena. Contrasting with the conventional, mechanically stacked planar twist moirés, recent work shows twisted van der Waals interfaces spontaneously formed in nanowires of layered crystals, where Eshelby twist due to axial screw dislocations stabilizes a chiral structure with small interlayer rotation. Here, the realization of tunable twist in germanium(II) sulfide (GeS) van der Waals nanowires is reported. Tapered nanowires host continuously variable interlayer twist. Homojunctions between dislocated (chiral) and defect‐free (achiral) segments are obtained by triggering the emission of axial dislocations during growth. Measurements across such junctions, implemented here using local absorption and luminescence spectroscopy, provide a convenient tool for detecting twist effects. The results identify a versatile system for 3D twistronics, probing moiré physics, and for realizing moiré architectures without equivalent in planar systems.

Sutter, Peter↗
DOE OSTI2022

Quasi‐Homojunction Organic Nonfullerene Photovoltaics Featuring Fundamentals Distinct from Bulk Heterojunctions

Abstract In contrast to classical bulk heterojunction (BHJ) in organic solar cells (OSCs), the quasi‐homojunction (QHJ) with extremely low donor content (≤10 wt.%) is unusual and generally yields much lower device efficiency. Here, representative polymer donors and nonfullerene acceptors are selected to fabricate QHJ OSCs, and a complete picture for the operation mechanisms of high‐efficiency QHJ devices is illustrated. PTB7‐Th:Y6 QHJ devices at donor:acceptor (D:A) ratios of 1:8 or 1:20 can achieve 95% or 64% of the efficiency obtained from its BHJ counterpart at the optimal D:A ratio of 1:1.2, respectively, whereas QHJ devices with other donors or acceptors suffer from rapid roll‐off of efficiency when the donors are diluted. Through device physics and photophysics analyses, it is observed that a large portion of free charges can be intrinsically generated in the neat Y6 domains rather than at the D/A interface. Y6 also serves as an ambipolar transport channel, so that hole transport as also mainly through Y6 phase. The key role of PTB7‐Th is primarily to reduce charge recombination, likely assisted by enhancing quadrupolar fields within Y6 itself, rather than the previously thought principal roles of light absorption, exciton splitting, and hole transport.

Chemistry↗
DOE OSTI2024

Single-event burnout in homojunction GaN vertical PiN diodes with hybrid edge termination design

GaN devices play a major role in modern electronics, providing high-power handling, efficient high-frequency operation, and resilience in harsh environments. However, electric field crowding at the edge of the anode often limits its full potential, leading to single-event effects (SEEs) at lower bias voltages under heavy ion radiation. Here, in this work, we report on the performance of homojunction GaN vertical PiN diodes with a hybrid edge termination design under heavy ion irradiation, specifically, oxygen ions, chlorine ions, Cf-252 fission fragments, and alpha particles from an Am-241 source. The unique hybrid edge termination (HET) design provides better electric field management, preventing breakdown from occurring at the edge of the anode at lower voltages. The results of this study reveal that these devices exhibit excellent tolerance to 12-MeV oxygen and 16-MeV chlorine ions, owing to their low linear energy transfer (LET) and range in GaN. However, single-event burnout (SEB) is observed during the Cf-252 exposure at about 50% of the diodes' electrical breakdown voltage due to the presence of higher LET and longer-range ions. Optical and scanning electron microscopy (SEM) reveal that the damage that caused by SEB lies close to the center of these devices rather than the anode edge. Devices with junction termination extension (JTE) instead of HET edge termination also show similar SEB when irradiated with Cf-252 fission fragments. Physical damage due to SEB occurs at the edge of the anode for these devices. These comparative results show the benefits of HET for enhancing the resistance of GaN-based PiN diodes to heavy ion irradiation.

42 ENGINEERING↗