SEARCH · Search NASA

Results for “horseshoe vortex”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Streakline flow visualization study of a horseshoe vortex in a large-scale, two-dimensional turbine stator cascade

Neutrally buoyant helium-filled bubbles were observed as they followed the streamlines in a horseshoe vortex system around the vane leading edge in a large-scale, two-dimensional, turbine stator cascade. Bubbles were introduced into the endwall boundary layer through a slot upstream of the vane leading edge. The paths of the bubbles were recorded photographically as streaklines on 16-mm movie film. Individual frames from the film have been selected, and overlayed to show the details of the horseshoe vortex around the leading edge. The transport of the vortex across the passage near the leading edge is clearly seen when compared to the streaks formed by bubbles carried in the main stream. Limiting streamlines on the endwall surface were traced by the flow of oil drops.

Gaugler, R. E.↗

NASA NTRS1979

Streakline flow visualization study of a horseshoe vortex in a large-scale, two-dimensional turbine stator cascade

Neutrally bouyant helium-filled bubbles were observed as they followed the streamlines in a horseshoe vortex system around the vane leading edge in a large scale, two dimensional, turbine stator cascade. Inlet Reynolds number, based on true chord, ranged between 100,000 to 300,000. Bubbles were introduced into the endwall boundary layer through a slot upstream of the vane leading edge. The paths of the bubbles were recorded photographically as streaklines on 16 mm movie film. Individual frames from the film were selected, and overlayed to show the details of the horseshoe vortex around the leading edge. The transport of the vortex across the passage near the leading edge is clearly seen when compared to the streaks formed by bubbles carried in the main stream. Limiting streamlines on the endwall surface were traced by the flow of oil drops.

Gaugler, R. E.↗

NASA NTRS1986

Measurements of a turbulent horseshoe vortex formed around a cylinder

An experimental investigation was conducted to characterize a symmetrical horseshoe vortex system in front of and around a single large-diameter right cylinder centered between the sidewalls of a wind tunnel. Surface flow visualization and surface static pressure measurements as well as extensive mean velocity and pressure measurements in and around the vortex system were acquired. The results lend new insight into the formation and development of the vortex system. Contrary to what has been assumed previously, a strong vortex was not identified in the streamwise plane of symmetry, but started a significant angular distance away from it. Rather than the multiple vortex systems reported by others, only a single primary vortex and saddle point were found. The scale of the separation process at the saddle point was much smaller than the scale of the approaching boundary layer thickness. Results of the present study not only shed light on such phenomena as the nonsymmetrical endwall flow in axial turbomachinery but can also be used as a test case for three-dimensional computational fluid mechanics computer codes.

Eckerle, W. A.↗

NASA NTRS1986

Horseshoe vortex formation around a cylinder

An experimental investigation was conducted to characterize a symmetrical horseshoe vortex system in front of and a around a single large-diameter right cylinder centered between the sidewalls of a wind tunnel. Surface flow visualization anad surface static pressure measurements as well as extensive mean velocity and pressure measurements in and around the vortex system were acquired. The results lend new insight into the formation and development of the vortex system. Contrary to what has been assumed previously, a strong vortex was not identified in the streamwise plane of symmetry, but started a significant angular distance away from it. Rather than the multiple vortex systems reported by others, only a single primary vortex and saddle point were found. The scale of the separation process at the saddle point was much smaller than the scale of the approaching bundary layer thickness. Results of the present study not only shed light on such phenomena as the nonsymmetrical endwall flow in axial turbomachinery but can also be used as a test case for three-dimensional computational fluid mechanics computer codes.

Eckerle, W. A.↗

NASA NTRS1982

Flow visualization study of the horseshoe vortex in a turbine stator cascade

Flow visualization techniques were used to show the behavior of the horseshoe vortex in a large scale turbine stator cascade. Oil drops on the end wall surface flowed in response to local shear stresses, indicating the limiting flow streamlines at the surface. Smoke injected into the flow and photographed showed time averaged flow behavior. Neutrally bouyant helium filled soap bubbles followed the flow and showed up on photographs as streaks, indicating the paths followed by individual fluid particles. Preliminary attempts to control the vortex were made by injecting air through control jets drilled in the end wall near the vane leading edge. Seventeen different hole locations were tested, one at a time, and the effect of the control jets on the path follwed by smoke in the boundary layer was recorded photographically.

Gaugler, R. E.↗

NASA NTRS1988

The mean flow structure around and within a turbulent junction or horseshoe vortex. II - The separated and junction vortex flow

Five-hole probe measurements of the flow through the separation region and in the vortex system of an incompressible subsonic flow around and within a turbulent junction or horseshoe vortex are reported. Mean velocity, static pressure, and total pressure results are presented. The streamwise vorticity field is obtained from the measured velocity field. Flow visualization results for the floor and cylinder surface agree well with the flow field data.

Pierce, F. J.↗

NASA NTRS1989

A multi-domain spectral computation of three-dimensional laminar horseshoe vortex flow using incompressible Navier-Stokes equations

Multidomain spectral methods are presently used to numerically simulate a strut-wall intersection's laminar horseshoe vortex flow through direct solution of the three-dimensional, incompressible, time-dependent Navier-Stokes equations. Direct expansion in Chebyshev polynomials and spectral element method spatial discretization of flow dependence are used to achieve high-order accuracy, and minimal dispersion errors. Low and moderate Reynolds number results are presented to illustrate the method application.

Tan, C. S.↗

NASA NTRS1988

The mean flow structure around and within a turbulent junction or horseshoe vortex. I - The upstream and surrounding three-dimensional boundary layer

An experimental study of the mean flow structure upstream, around, and in a turbulent junction or horseshoe vortex is presented for the case of an incompressible subsonic flow. Mean velocity field and turbulent kinetic energy field measurements (obtained with hot film anemometry) and local wall shear stress measurements are used to monitor the upstream and surrounding three-dimensional turbulent boundary layer-like flow away from separation. Freestream or edge velocity and floor static pressure results are reported.

Menna, J. D.↗

NASA NTRS1985

A computational study of saddle point separation and horseshoe vortex system

Incompressible flow around a cylinder-end wall junction has been simulated by solving the incompressible Navier-Stokes equations in three dimensions. The equations, cast in generalized curvilinear coordinates, are solved in time as a hyperbolic system by adding a pressure term in the continuity equation and are marched to a steady state. Various physical quantities associated with the saddle point of separation and the horseshoe vortex system are calculated. Computational and experimental results are generally consistent. The skin friction and the pressure distribution on the end wall are consistent with the physics of the problem. Secondary flows both in front of the cylinder and behind it are predicted that are in qualitative agreement with flow visualization results. The calculations also indicate a strongly nonuniform pressure loading along the length of the cylinder. A new mechanism for the existence of the recirculation bubbles behind the cylinder-end wall with relatively low ratio of cylinder height to the approaching boundary layer thickness is observed which is markedly different from its two-dimensional counterpart.

Kaul, U. K.↗

DOE OSTI2025

Multimode turbulent flow measurements using magnetic resonance imaging- and laser-based techniques and computational fluid dynamics simulations

We studied the flow field characteristics of a turbulent flow over a regularized cube array with a perpendicular injection flow through the floor between the second and third cubical elements, representing the complex flow interactions of a 3D jet and the wake flows behind cubical obstacles. Four different experimental measurements were performed: two magnetic resonance imaging-based measurements for three-dimensional three-component velocity (MRV) and concentration (MRC) and two laser-based techniques, particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF), for two-dimensional two-component velocity and concentration measurement, respectively. The mainstream Reynolds number is Re = 15 000⁠, based on the primary inlet velocity U m and channel height D H ⁠, whereas the injector Reynolds number is Re j = 3400⁠, based on the injector velocity U j and the injector's exit width D j ⁠. Numerical simulations were performed for the studied flow configuration of turbulent flow over a regularized cube array using Reynolds-averaged Navier–Stokes (RANS) and large-eddy simulation (LES) approaches. Results obtained from experimental measurements—including MRV, MRC, PIV, and PLIF—as well as RANS and LES simulations are discussed and compared along several horizontal and vertical planes of the studied configuration. In addition, 3D turbulent flow structures, such as leading-edge vortex, horseshoe vortex, and jet shear-layer vortex, and the isosurfaces of scalar concentration successfully revealed by MRV and MRC techniques were found to be in very good agreement with those 3D features extracted from RANS and LES simulations. In conclusion, the high-resolution experimental and numerical database obtained from this study could be useful for validation and verification of numerical codes.

Computational fluid dynamics↗

NASA NTRS1992

Investigation of three-dimensional flow field in a turbine including rotor/stator interaction. II - Three-dimensional flow field at the exit of the nozzle

The nozzle exit flowfield was measured at two axial locations with a miniature five-hole probe. Measurements were taken from hub-to-tip, blade-to-blade at 21 radial locations and at two axial locations downstream of the nozzle trailing edge to resolve the flowfield accurately including the nozzle wake, secondary flow region, horseshoe vortex and losses. All three components of the velocity, stagnation pressure, static pressure, and pitch and yaw angles have been resolved very accurately. The wake data seems to indicate that the decay of the wake is faster than the wake of an isolated nozzle row. The cause of this is attributed to the presence of the rotor downstream. A distinct vortex core has been observed near the tip. The indications are that the horseshoe vortex and the passage vortex have merged to produce a single loss core region. Roughly a third of the blade height passage near the tip and a third of the blade height near the hub is dominated by secondary flow, passage vortex and the horseshoe vortex phenomena. Only the middle third of the nozzle behaves as per design. These and other data are presented, interpreted and synthesized to understand the nozzle flowfield.

Zaccaria, M.↗

NASA NTRS1987

An investigation of the flow characteristics in the blade endwall corner region

Studies were undertaken to determine the structure of the flow in the blade end wall corner region simulated by attaching two uncambered airfoils on either side of a flat plate with a semicircular leading edge. Detailed measurements of the corner flow were obtained with conventional pressure probes, hot wire anemometry, and flow visualization. The mean velocity profiles and six components of the Reynolds stress tensor were obtained with an inclined single sensor hot wire probe whereas power spectra were obtained with a single sensor oriented normal to the flow. Three streamwise vortices were identified based on the surface streamlines, distortion of total pressure profiles, and variation of mean velocity components in the corner. A horseshoe vortex formed near the leading edge of the airfoil. Within a short distance downstream, a corner vortex was detected between the horseshoe vortex and the surfaces forming the corner. A third vortex was formed at the rear portion of the corner between the corner vortex and the surface of the flat plate. Turbulent shear stress and production of turbulence are negligibly small. A region of negative turbulent shear stress was also observed near the region of low turbulence intensity from the vicinity of the flat plate.

Hazarika, Birinchi K.↗

NASA NTRS1986

Three-dimensional fluid flow phenomena in the blade end wall corner region

Flow visualization, static and total pressure measurements, and mean velocity profile measurements with a single-sensor inclined hot wire probe, are used in a study of three-dimensional flow at a turbine blade end wall corner region for six critical axial stations along the blade chord. Three vortices are identified: (1) a horseshoe vortex near the leading edge; (2) a corner eddy between the horseshoe vortex and the corner; and (3) a vortex at the rear portion of the corner due to the corner eddy's secondary flow. Attention is given to the relative size and rate-of-spread of the vortices in the streamwise direction.

Hazarika, B. K.↗

NASA NTRS1989

Near wall flow parameters in the blade end-wall corner region

The effects of secondary end-wall corner flows on near wall flow parameters in turbomachinary are studied. Important near wall flow parameters such as the wall shear stress vector, the mean wall pressure, the wall pressure fluctuations, and the correlation of the wall pressure fluctuation with the velocity fluctuation in three-dimensional turbulent flows are first experimentally investigated. The blade end-wall corner region is simulated by mounting airfoil section of symmetric blades on both sides of the flat plate with semicircular leading edge. Observed changes in the maximum values of the wall shear stress and its location from the corner line could be associated with the streching and attenuation of the horseshoe vortex. The values of wall pressure fluctuation intensity in the blade end-wall corner region are found to be influenced by the changes of the strength of the horseshoe vortex. The correlation of the wall pressure fluctuation with the velocity fluctuation indicated higher values of correlation coefficient in the inner region as compared to the outer region of the shear layer. The values of wall pressure-velocity correlation coefficient in the blade end-wall corner region also decrease in the streamwise direction while increasing in the presence of favorable and adverse pressure gradients.

R K Bhargava↗

NASA NTRS2016

Comparison of Experimental Surface and Flow Field Measurements to Computational Results of the Juncture Flow Model

Wing-body juncture flow fields on commercial aircraft configurations are challenging to compute accurately. The NASA Advanced Air Vehicle Program's juncture flow committee is designing an experiment to provide data to improve Computational Fluid Dynamics (CFD) modeling in the juncture flow region. Preliminary design of the model was done using CFD, yet CFD tends to over-predict the separation in the juncture flow region. Risk reduction wind tunnel tests were requisitioned by the committee to obtain a better understanding of the flow characteristics of the designed models. NASA Ames Research Center's Fluid Mechanics Lab performed one of the risk reduction tests. The results of one case, accompanied by CFD simulations, are presented in this paper. Experimental results suggest the wall mounted wind tunnel model produces a thicker boundary layer on the fuselage than the CFD predictions, resulting in a larger wing horseshoe vortex suppressing the side of body separation in the juncture flow region. Compared to experimental results, CFD predicts a thinner boundary layer on the fuselage generates a weaker wing horseshoe vortex resulting in a larger side of body separation.

Roozeboom, Nettie H.↗

NASA NTRS2016

Comparison of Experimental Surface and Flow Field Measurements to Computational Results of the Juncture Flow Model

Roozeboom, Nettie H.↗

NASA NTRS1984

Simulation of blunt-fin-induced shock wave and turbulent boundary-layer interaction

A supersonic flow over a blunt fin mounted on a flat plate is numerically simulated. The fin shock causes the boundary layer to separate and results in a complicated, three-dimensional shockwave and boundary-layer interaction. The computed result is in good agreement with the measured pressure on the fin and the flat plate. The main features, such as peak pressure on the fin leading edge and a double peak pressure on the plate, are closely predicted. The role of the horseshoe vortex is discussed. The vortex leads to the development of high-speed flow, and, hence, low-pressure regions on the fin and the plate. Different thicknesses of the incoming boundary layer have been studied. Varying the thicknesses by an order of magnitude shows that the size of the horseshoe vortex and therefore the spatial extent of the interaction are inviscid-dominated, and are weakly dependent on the Reynolds number. Colored graphics are used to show details of the interaction flow field.

Hung, C.-M.↗

NASA NTRS1985

Simulation of Blunt-Fin-Induced Shock-Wave and Turbulent Boundary-Layer Interaction

The Reynolds-averaged Navier-Stokes equations are solved numerically for supersonic flow over a blunt fin mounted on a flat plate. The fin shock causes the boundary layer to separate. which results in a complicated, three-dimensional shock-wave and boundary-layer interaction. The computed results are in good agreement with the mean static pressure measured on the fin and the flat plate. The main features, such as peak pressure on the fin leading edge and a double peak on the plate. are predicted well. The role of the horseshoe vortex is discussed. This vortex leads to the development of high-speed flow and, hence, low-pressure regions on the fin and the plate. Different thicknesses of the incoming boundary layer have been studied. Varying the thicknesses by an order of magnitude shows that the size of the horseshoe vortex and, therefore, the spatial extent of the interaction are dominated by inviscid flow and only weakly dependent on the Reynolds number. Colored graphics are used to show details of the interaction flow field.

Hung, Ching-Mao↗