Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydride conductors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Defect Chemistry and Hydrogen Transport in La/Sr-Based Oxyhydrides

Oxyhydrides in the series La 2 – y Sr y LiH 1 + y O 3 – y are attractive materials for solid-state hydride electrolytes. However, their chemical stability is poor, and thus far only La 2 LiHO 3 (y = 0) has been demonstrated in a working fuel cell. Using a first-principles approach to study defect chemistry and stability, we find that La 2 LiHO 3 can be stabilized over a range of H-rich, O-poor chemical conditions, while Sr 2 LiH 3 O has low stability. Here, defects are critical for ionic transport and for stability, particularly in Sr 2 LiH 3 O, in which anion antisites and H vacancies readily form. In fact, we show that the ground-state structure of Sr 2 LiH 3 O is inherently disordered. La 2 LiHO 3 has low conductivity, which we connect to the high formation energy of defects such as VO and OH that are necessary for hydride conduction. When Sr 2 LiH 3 O is grown under carefully selected conditions, V H + defects can be made prevalent; these defects give rise to much higher ionic conductivity than can be obtained in La 2 LiHO 3 . In general, we show that the choice of synthesis conditions is vital when seeking to optimize the stability and ionic conductivity of these oxyhydrides, thereby tailoring them for use in solid-state hydrogen fuel cells.

08 HYDROGEN↗

Temperature Dependent Local Atomic Structure and Vibrational Dynamics of Barium Hydride and Calcium Hydride

Solid-state ionic conductors that exhibit pure ionic transport of hydride anions are rare. Here, we investigate two alkaline earth metal hydrides, barium hydride and calcium hydride, using neutron scattering techniques to understand how the local atomic environment plays a role in the diffusion of hydride ions. At high temperatures, barium hydride exhibits exceptional transport properties with ionic conductivities that are higher than those of many of the typical proton and oxide ion conductors in use today. Total neutron scattering and pair distribution function analysis reveal how a structural phase transition converts barium hydride from a modest ionic conductor into a fast ionic conductor through the introduction of disorder, deuterium site splitting, and dynamic structural fluctuations. Furthermore, neutron vibrational spectroscopy is employed to probe changes in the temperature evolution of the lattice dynamics and local energy landscape. These results improve our fundamental knowledge of the interplay between structure and dynamics governing a rare conduction process of hydride ions in solid-state materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uncovering the hydride ion diffusion pathway in barium hydride via neutron spectroscopy

Solid state materials possessing the ability for fast ionic diffusion of hydrogen have immense appeal for a wide range of energy-related applications. Ionic hydrogen transport research is dominated by proton conductors, but recently a few examples of hydride ion conductors have been observed as well. Barium hydride, BaH 2 , undergoes a structural phase transition around 775 K that leads to an order of magnitude increase in the ionic conductivity. This material provides a prototypical system to understand hydride ion diffusion and how the altered structure produced by the phase transition can have an enormous impact on the diffusion. We employ quasielastic and inelastic neutron scattering to probe the atomic scale diffusion mechanism and vibrational dynamics of hydride ions in both the low- and high-temperature phases. Jump lengths, residence times, diffusion coefficients, and activation energies are extracted and compared to the crystal structure to uncover the diffusion pathways. We find that the hydrogen jump distances, residence times, and energy barriers become reduced following the phase transition, allowing for the efficient conduction of hydride ions through a series of hydrogen jumps of length L = 3.1 Å.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Drastic reduction in the surface recombination velocity of crystalline silicon passivated with catalytic chemical vapor deposited SiN{sub x} films by introducing phosphorous catalytic-doped layer

We improve the passivation property of n-type crystalline silicon (c-Si) surface passivated with a catalytic chemical vapor deposited (Cat-CVD) Si nitride (SiN{sub x}) film by inserting a phosphorous (P)-doped layer formed by exposing c-Si surface to P radicals generated by the catalytic cracking of PH{sub 3} molecules (Cat-doping). An extremely low surface recombination velocity (SRV) of 2 cm/s can be achieved for 2.5 Ω cm n-type (100) floating-zone Si wafers passivated with SiN{sub x}/P Cat-doped layers, both prepared in Cat-CVD systems. Compared with the case of only SiN{sub x} passivated layers, SRV decreases from 5 cm/s to 2 cm/s. The decrease in SRV is the result of field effect created by activated P atoms (donors) in a shallow P Cat-doped layer. Annealing process plays an important role in improving the passivation quality of SiN{sub x} films. The outstanding results obtained imply that SiN{sub x}/P Cat-doped layers can be used as promising passivation layers in high-efficiency n-type c-Si solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Prediction of p K a s of Late Transition‐Metal Hydrides via a QM/QM Approach

Three implicit solvation models, the conductor‐like polarizable continuum model (C‐PCM), the conductor‐like screening model (COSMO), and universal implicit solvent model (SMD), combined with a hybrid two layer QM/QM approach (ONIOM), were utilized to calculate the p K a values, using a direct thermodynamic scheme, of a set of Group 10 transition metal (TM) hydrides in acetonitrile. To obtain the optimal combination of quantum methods for ONIOM calculations with implicit solvation models, the influence of factors, such as the choice of density functional and basis set, the atomic radii used to build a cavity in the solvent, and the size of the model system in an ONIOM scheme, was examined. Additionally, the impact of Grimme's empirical dispersion correction and exact exchange was also investigated. The results were calibrated by experimental data. This investigation provides insight about effective models for the prediction of thermodynamic properties of TM‐containing complexes with bulky ligands. © 2019 Wiley Periodicals, Inc.

Patel, Prajay↗

Preparation of Ag Schottky contacts on n-type GaN bulk crystals grown in nitrogen rich atmosphere by the hydride vapor phase epitaxy technique

Electrical properties of Schottky contacts on n-type GaN grown in nitrogen rich atmosphere with different N/Ga ratios by hydride vapor phase epitaxy were investigated. We show that tunneling of electrons from the conduction band of GaN to the metal is dominant in our samples. The quality of Schottky contacts does not only depend on surface preparation but also on the growth conditions of the crystals. Schottky contacts on these crystals show an increasing deterioration when higher N/Ga growth ratios are used. We correlate our results with the presence of negatively charged gallium vacancies in the samples. These charges compensate the positively charged donors and lead to a significant increase in series resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Frustrated incomplete donor ionization in ultra-low resistivity germanium films

The relationship between carrier concentration and donor atomic concentration has been determined in n-type Ge films doped with P. The samples were carefully engineered to minimize non-active dopant incorporation by using specially designed P(SiH{sub 3}){sub 3} and P(GeH{sub 3}){sub 3} hydride precursors. The in situ nature of the doping and the growth at low temperatures, facilitated by the Ge{sub 3}H{sub 8} and Ge{sub 4}H{sub 10} Ge sources, promote the creation of ultra-low resistivity films with flat doping profiles that help reduce the errors in the concentration measurements. The results show that Ge deviates strongly from the incomplete ionization expected when the donor atomic concentration exceeds N{sub d} = 10{sup 17} cm{sup −3}, at which the energy separation between the donor and Fermi levels ceases to be much larger than the thermal energy. Instead, essentially full ionization is seen even at the highest doping levels beyond the solubility limit of P in Ge. The results can be explained using a model developed for silicon by Altermatt and coworkers, provided the relevant model parameter is properly scaled. The findings confirm that donor solubility and/or defect formation, not incomplete ionization, are the major factors limiting the achievement of very high carrier concentrations in n-type Ge. The commercially viable chemistry approach applied here enables fabrication of supersaturated and fully ionized prototypes with potential for broad applications in group-IV semiconductor technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A model for arsenic anti-site incorporation in GaAs grown by hydride vapor phase epitaxy

GaAs growth by hydride vapor phase epitaxy (HVPE) has regained interest as a potential route to low cost, high efficiency thin film photovoltaics. In order to attain the highest efficiencies, deep level defect incorporation in these materials must be understood and controlled. The arsenic anti-site defect, As{sub Ga} or EL2, is the predominant deep level defect in HVPE-grown GaAs. In the present study, the relationships between HVPE growth conditions and incorporation of EL2 in GaAs epilayers were determined. Epitaxial n-GaAs layers were grown under a wide range of deposition temperatures (T{sub D}) and gallium chloride partial pressures (P{sub GaCl}), and the EL2 concentration, [EL2], was determined by deep level transient spectroscopy. [EL2] agreed with equilibrium thermodynamic predictions in layers grown under conditions in which the growth rate, R{sub G}, was controlled by conditions near thermodynamic equilibrium. [EL2] fell below equilibrium levels when R{sub G} was controlled by surface kinetic processes, with the disparity increasing as R{sub G} decreased. The surface chemical composition during growth was determined to have a strong influence on EL2 incorporation. Under thermodynamically limited growth conditions, e.g., high T{sub D} and/or low P{sub GaCl}, the surface vacancy concentration was high and the bulk crystal was close to equilibrium with the vapor phase. Under kinetically limited growth conditions, e.g., low T{sub D} and/or high P{sub GaCl}, the surface attained a high GaCl coverage, blocking As adsorption. This competitive adsorption process reduced the growth rate and also limited the amount of arsenic that incorporated as As{sub Ga}. A defect incorporation model which accounted for the surface concentration of arsenic as a function of the growth conditions, was developed. This model was used to identify optimal growth parameters for the growth of thin films for photovoltaics, conditions in which a high growth rate and low [EL2] could be attained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification of titanium-hydrogen complexes with up to four hydrogen atoms in silicon

Using high-resolution Laplace deep level transient spectroscopy studies, several TiH-related complexes (E40′, E170, E170′, and E260) were observed in wet-chemically etched and H-plasma treated n-type Si. We assign E40′ and E170 to two different configurations of Ti with one H atom. Both of them are shown to behave as single donor states with an activation enthalpy of E{sub C} − 0.07 eV (E40′) and E{sub C} − 0.34 eV (E170) in the upper half of Si. E170′ with an activation energy of E{sub C} − 0.37 eV is correlated with the donor state of the Ti{sub i}H{sub 2} defect, whereas E260 is attributed to the donor state of Ti{sub i}H{sub 3}. Besides the TiH defects, the presence of electrically inactive TiH{sub 4} is reported. No titanium-hydrogen-related levels were observed in p-type Si.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Distribution of free carriers near heavily-doped epitaxial surfaces of n-type Ge(100) upon HF and HCl treatments

Carrier distributions near n-type epitaxially-grown Ge(100) surfaces with high impurity concentrations (1 × 10{sup 20} cm{sup −3}) were studied using high resolution electron energy loss spectroscopy (HREELS) upon surface treatments in aqueous solutions of HF and HCl. After surface treatments with HCl and HF, the molecular vibration modes distinctly showed either chloride or hydride terminations of Ge surfaces with negligible oxidation. The free-carrier concentration profile was inferred from the conduction band plasmon measurements as a function of the incident electron energies employing a dielectric theory simulation with a 4-layer structure and an effective electron mass of 0.02m{sub 0}. A carrier-free layer of 40 and 24 Å were derived for HCl- and HF-treated Ge(100), respectively. The surface band bending was estimated to be 0.32 eV for HF-treated Ge. HCl-treated Ge surfaces showed a band bending of 0.91 eV attributed to the strong effect of the surface Cl-Ge dipole.

36 MATERIALS SCIENCE↗

Electrochemical extraction of hydrogen isotopes from Li/LiT mixtures

In this study, we propose a new methodology for lithium hydride electrolysis which can be extended for the extraction of hydrogen isotopes from molten lithium. This new process utilizes a ceramic lithium ion conductor that can be directly immersed in molten lithium to facilitate the electrochemical extraction of hydrogen isotopes in the molten state. The extraction of hydrogen isotopes from lithium is necessary for the safe and reliable operation of fusion reactors that utilize molten metals as a coolant and/or as tritium breeder blanket in the system. A number of technologies for hydrogen isotope extraction from molten lithium have been proposed that can facilitate the extraction of hydrogen isotopes. However, they require a series of complicated mechanical steps (expensive mechanical parts with limited lifetimes) in order to carry out the separation and prevent impurities build up in the extraction process. Our proposed electrochemical process can potentially simplify the isotope extraction process by eliminating many of the mechanical parts and being able to integrate this technology within the fusion reactor to perform the extraction in-line. To determine the feasibility of this process, a proof of concept was demonstrated experimentally utilizing a solid state lithium ion conductor to facilitate the electrochemical extraction of hydrogen and deuterium from lithium in the molten state. The extraction of hydrogen and deuterium from molten lithium was verified during this experiment and indicates this new process is a potential alternative for other processes used for the extraction of hydrogen isotopes. Process modeling was also performed to understand the energy requirements and electrode areas needed for decomposing different concentrations of tritium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogen in energy and information sciences

Beyond its fascinating chemistry as the first element in the Periodic Table, hydrogen is of high societal importance in energy technologies and of growing importance in energy-efficient computing. In energy, hydrogen has reemerged as a potential solution to long-term energy storage and as a carbon-free input for materials manufacturing. Its utilization and production rely on the availability of proton-conducting electrolytes and mixed proton–electron conductors for the components in fuel cells and electrolyzers. In computing, proton mediation of electronic properties has garnered attention for electrochemically controlled energy-efficient neuromorphic computing. Incorporation of substitutional and interstitial hydride ions in oxides, though only recently established, enables tuning of electronic and magnetic properties, inviting a range of possible exotic applications. This article addresses common themes in the fundamental science of hydrogen incorporation and transport in oxides as relevant to pressing technological needs. The content covers (1) lattice (or bulk) mechanisms of hydrogen transport, primarily addressing proton transport, but also touching on hydride ion transport; (2) interfacial transport; (3) exploitation of extreme external drivers to achieve unusual response; and (4) advances in methods to probe the hydrogen environment and transport pathway. The snapshot of research activities in the field of hydrogen-laden materials described here underscores exciting recent breakthroughs, remaining open questions, and breathtaking experimental tools now available for unveiling the nature of hydrogen in solid-state matter.

08 HYDROGEN↗

Investigation of the stability of Co-doped apatite ionic conductors in NH{sub 3}

Hydrogen powered solid oxide fuel cells (SOFCs) are of enormous interest as devices for the efficient and clean production of electrical energy. However, a number of problems linked to hydrogen production, storage and transportation are slowing down the larger scale use of SOFCs. Identifying alternative fuel sources to act as intermediate during the transition to the full use of hydrogen is, therefore, of importance. One excellent alternative is ammonia, which is produced on a large scale, is relatively cheap and has the infrastructure for storage and transportation already in place. However, considering that SOFCs operate at temperatures higher than 500 {sup o}C, a potential problem is the interaction of gaseous ammonia with the materials in the cathode, anode and solid electrolyte. In this paper, we extend earlier work on high temperature reactions of apatite electrolytes with NH{sub 3} to the transition metal (Co) doped systems, La{sub 9.67}Si{sub 5}CoO{sub 26} and La{sub 10}(Si/Ge){sub 5}CoO{sub 26.5}. A combination of PXRD, TGA and XAFS spectroscopy data showed a better structural stability for the silicate systems. Apatite silicates and germanates not containing transition metals tend to substitute nitride anions for their interstitial oxide anions, when reacted with NH{sub 3} at high temperature and, consequentially, lower the interstitial oxide content. In La{sub 9.67}Si{sub 5}CoO{sub 26} and La{sub 10}(Si/Ge){sub 5}CoO{sub 26.5} reduction of Co occurs as a competing process, favouring lower levels of nitride-oxide substitution. -- Graphical Abstract: In reactions between the apatites La{sub 9.67}Si{sub 5}CoO{sub 26} and La{sub 10}(Si/Ge){sub 5}CoO{sub 26.5} and NH{sub 3} (g) at temperatures T>500 {sup o}C, the partial substitution of the Si and Ge by Co seems to discourage O{sup 2-}/N{sup 3-} substitution in favour of the reduction of the metal. Display Omitted

36 MATERIALS SCIENCE↗

Brønsted acid-base reactions with anhydrous sulfamates as a pathway to [SO 3 N] 3- -containing compounds: Preparation of Li 3 SO 3 N

Li 3 SO 3 N has been prepared by the mechanochemical reaction between lithium sulfamate (LiSO 3 NH 2 ) and lithium amide or lithium hydride. This is the first example of an anhydrous compound containing the rare [SO 3 N] 3- polyanion. Li 3 SO 3 N adopts the low-temperature Pmn21β structure of isoelectronic Li 3 PO 4 . Structural refinement from neutron powder diffraction data supports disordering of nitrogen over two of the three anion sites, although a fully disordered model cannot be conclusively refuted. While the compound is a poor ionic conductor, it is electrochemically stable to at least 5 V vs. Li + /Li 0 . This simple mechanochemical pathway should be suitable for preparing a host of other alkali-rich nitrogen-containing polyanionic compounds.

Kurzman, Joshua A.↗

Non-noble metal based metallization systems

The results of efforts to produce a nonsilver metallization system for silicon photovoltaic cells are given. The system uses a metallization system based on molybdenum, tin, and titanium hydride. The initial work in this system was done using the MIDFILM process. The MIDFILM process attains a line resolution comparable to photoresist methods with a process related to screen printing. The surface to be processed is first coated with a thin layer of photopolymer material. Upon exposure to ultraviolet light through a suitable mask, the polymer in the non-pattern area crosslinks and becomes hard. The unexposed pattern areas remain tacky. The conductor material is then applied in the form of a dry mixture of metal which adheres to the tacky pattern area. The assemblage is then fired to ash the photopolymer and sinter the conductor powder.

Garcia, A., III↗

PHEV-EV Charger Technology Assessment with an Emphasis on V2G Operation

More battery powered electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) will be introduced to the market in 2011 and beyond. Since these vehicles have large batteries that need to be charged from an external power source or directly from the grid, their batteries, charging circuits, charging stations/infrastructures, and grid interconnection issues are garnering more attention. This report summarizes information regarding the batteries used in PHEVs, different types of chargers, charging standards and circuits, and compares different topologies. Furthermore, it includes a list of vehicles that are going to be in the market soon with information on their charging and energy storage equipment. A summary of different standards governing charging circuits and charging stations concludes the report. There are several battery types that are available for PHEVs; however, the most popular ones have nickel metal hydride (NiMH) and lithium-ion (Li-ion) chemistries. The former one is being used in current hybrid electric vehicles (HEVs), but the latter will be used in most of the PHEVs and EVs due to higher energy densities and higher efficiencies. The chargers can be classified based on the circuit topologies (dedicated or integrated), location of the charger (either on or off the vehicle), connection (conductive, inductive/wireless, and mechanical), electrical waveform (direct current (dc) or alternating current (ac)), and the direction of power flow (unidirectional or bidirectional). The first PHEVs typically will have dedicated, on-board, unidirectional chargers that will have conductive connections to the charging stations or wall outlets and will be charged using either dc or ac. In the near future, bidirectional chargers might also be used in these vehicles once the benefits of practical vehicle to grid applications are realized. The terms charger and charging station cause terminology confusion. To prevent misunderstandings, a more descriptive term of electric vehicle supply equipment (EVSE) is used instead of charging station. The charger is the power conversion equipment that connects the battery to the grid or another power source, while EVSE refers to external equipment between the grid or other power source and the vehicle. EVSE might include conductors, connectors, attachment plugs, microprocessors, energy measurement devices, transformers, etc. Presently, there are more than 40 companies that are producing EVSEs. There are several standards and codes regarding conductive and inductive chargers and EVSEs from the Society of Automotive Engineers (SAE), the Underwriter Laboratories (UL), the International Electrotechnical Commission (IEC), and the National Electric Code (NEC). The two main standards from SAE describe the requirements for conductive and inductive coupled chargers and the charging levels. For inductive coupled charging, three levels are specified: Level 1 (120 V and 12 A, single-phase), Level 2 (208 V-240 V and 32 A, single-phase), and Level 3 (208-600 V and 400 A, three-phase) . The standard for the conductive-coupled charger also has similar charging ratings for Levels 1 and 2, but it allows higher current ratings for Level 2 charging up to 80 A. Level 3 charging for this standard is still under development and considers dc charging instead of three-phase ac. More details in these areas and related references can be found in this Oak Ridge National Laboratory (ORNL) report on PHEV-EV charger technology assessment.

25 ENERGY STORAGE↗