Search NASA⌕ Search

SEARCH · Search NASA

Results for “ignition prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Assessment of Enthalpy-Based Conditional Moment Closure Models in Predicting Ignition of Lean and Stoichiometric PRF-Air Mixtures with Temperature Inhomogeneity

Accurate prediction of the ignition delay in turbulent flows is important in developing advanced combustion technology for internal combustion engines. Enthalpy-based conditional moment closure (CMC) models are assessed with 2-D direct numerical simulation (DNS) data for ignition of homogeneous PRF-air mixtures with temperature inhomogeneity in homogeneous isotropic turbulence. The sensible-enthalpy-based CMC model is compared with the total-enthalpy-based formulation, with the focus being placed on assessing the capability of the CMC models in predicting ignition processes under different engine conditions. A priori analysis shows that the total-enthalpy-based CMC gives good predictions of the heat release rates in the lean mixtures when the temperature inhomogeneity level is low, but leads to significant overprediction under the stoichiometric condition regardless of the thermal stratification levels. On the other hand, the sensible enthalpy formulation performs well for all conditions considered in this study due to the suppressed conditional temperature fluctuations. A mapping method to model conditional scalar dissipation rates and probability density function of sensible enthalpy is also assessed.

Wang, Wei↗

Machine learning-assisted early ignition prediction in a complex flow

Machine learning methods are used to improve the efficiency by which turbulence-resolved simulations predict whether a hydrogen jet in air crossflow will successfully ignite. The flush-mounted jet issues perpendicularly from the wall of a low-speed wind tunnel into a turbulent boundary layer wherein a laser-induced optical breakdown (LIB) hotspot is deposited. A detailed hydrogen chemical mechanism is used to model the radicals and any subsequent chemical reactions. A dielectric-barrier discharge actuator generates body forces and hydrogen radicals near the jet orifice. Here we focus on the success or not of the ignition based on LIB location. A challenge is that definitive determination of this requires long simulations, up to 440 µs after the LIB deposition. This is particularly expensive since multiple simulations are required to find the threshold. To reduce the computational effort, three short-time (91 µs) criteria are proposed, evaluated, and compared: a constructed criterion based on detailed observations of radicals near the stoichiometric surface and two machine learning approaches, each trained on 38 realizations. The constructed criterion provides a low-cost estimate of the ignition boundary that is unambiguous in 45 of the 50 training and test trials, so only 10% of them would need to be simulated longer. The trained neural networks correctly predict outcomes in all cases evaluated, with the more automated procedure—a convolutional neural network (CNN) trained on two-dimensional images—providing the most definitive outcome prediction. From the CNN, a sensitivity analysis is used to determine which kernel features from the two-dimensional input data, as defined by intermediate-layer network weights, are important for identifying ignition.

42 ENGINEERING↗

A statistical model to predict ignition probability

Ignition capability is a critical design constraint for aeronautical gas turbines. However the current trend toward overall lean burn is detrimental to the engine ignition and relight and the ignition system must be adapted to ensure a fast and reliable light-round in all circumstances. As ignition is a stochastic phenomenon, the optimization of an ignition system requires to build ignition probability maps, which is difficult and costly with either experiment or numerical simulation as both require many tests. Here, this work proposes a model to predict the ignition probability map, knowing only flow statistics in non-reacting conditions, i.e., with only one test. The originality of the model is to construct statistics of the flame kernel trajectory, which are then combined with local flow indicators to evaluate the ignition probability at the considered sparking location. Application to a swirled burner operated in premixed, non-premixed and spray combustion modes illustrates the model concepts and demonstrates its ability to recover the experimental ignition map with good accuracy.

42 ENGINEERING↗

The impact of the third O 2 addition reaction network on ignition delay times of neo-pentane

In this work, we studied the oxidation of neo-pentane by combining experiments, theoretical calculations, and mechanistic developments to elucidate the impact of the 3rd O 2 addition reaction network on ignition delay time predictions. The experiments are based on photoionization mass spectrometry in jet-stirred and time-resolved flow reactors allowing for sensitive detection of the keto-hydroperoxide (KHP) and keto-dihydroperoxide (KDHP) intermediates. With neo-pentane exhibiting a unique symmetric molecular structure, which consequently results only in single KHP and KDHP isomers, theoretical calculations of ionization and fragment appearance energies and of absolute photoionization cross sections enabled the unambiguous identification and quantification of the KHP intermediate. Its temperature and time-resolved profiles together with calculated and experimentally observed KHP-to-KDHP signal ratios were compared to simulation results based on a newly developed mechanism that describes the 3rd O 2 addition reaction network. A satisfactory agreement has been observed between the experimental data points and the simulation results, thus adding confidence to the model's overall performance. Finally, this mechanism was used to predict ignition delay times reported previously in shock tube and rapid compression machine experiments (J. Bugler et al., Combust. Flame 163 (2016) 138–156). While the model accurately reproduces the experimental data, simulations with and without the 3rd O 2 addition reaction network included reveal only a negligible effect on the predicted ignition delay times at 10 and 20 atm. According to model calculations, low temperatures and high pressures promote the importance of the 3rd O2 addition reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PREDICTION OF CYCLIC VARIABILITY AND KNOCK-LIMITED SPARK ADVANCE (KLSA) IN SPARK-IGNITION (SI) ENGINE

Engine knock remains one of the major barriers to further improve the thermal efficiency of spark-ignition (SI) engines. SI engine is usually operated at knock-limited spark advance (KLSA) to achieve possibly maximum efficiency with given engine hardware and fuel properties. Co-optimization of fuels and engines is promising to improve engine efficiency, and predictive computational fluid dynamics (CFD) models can be used to facilitate this process. However, cyclic variability of SI engine demands that multi cycle results are required to capture the extreme conditions. In addition, Mach Courant Friedrichs-Lewy (CFL) number of 1 is desired to accurately predict the knock intensity (KI), resulting in unaffordable computational cost. In this study, a new approach to numerically predict KLSA using large Mach CFL of 50 with ten consecutive cycle simulation is proposed. This approach is validated against the experimental data for a boosted SI engine at multiple loads and spark timings with good agreements in terms of cylinder pressure, combustion phasing, and cyclic variation. Engine knock is predicted with early spark timing, indicated by significant pressure oscillation and end-gas heat release. Maximum amplitude of pressure oscillation analysis is performed to quantify the KI, and the slope change point in KI extrema is used to indicate the KLSA accurately. Using a smaller Mach CFL number of 5 also results in the same conclusions, thus demonstrating that this approach is insensitive to the Mach CFL number. The use of large Mach CFL number allows us to achieve fast turn-around time for multicycle engine CFD simulations.

CCV↗

Prospects and Limitations of Predicting Fuel Ignition Properties from Low-Temperature Speciation Data

Using chemical kinetic modeling and statistical analysis, we investigate the possibility of correlating key chemical “markers”–typically small molecules–formed during very lean (φ ~ 0.001) oxidation experiments with near-stoichiometric (φ ~ 1) fuel ignition properties. One goal of this work is to evaluate the feasibility of designing a fuel-screening platform, based on small laboratory reactors that operate at low temperatures and use minimal fuel volume. Buras et al. [Combust. Flame2020,216, 472–484] have shown that convolutional neural net (CNN) fitting can be used to correlate first-stage ignition delay times (IDTs) with OH/HO2 measurements during very lean oxidation in low-T flow reactors with better than factor-of-2 accuracy. In this work, we test the limits of applying this correlation-based approach to predict the low-temperature heat release (LTHR) and total IDT, including the sensitivity of total IDT to the equivalence ratio, φ. We demonstrate that first-stage IDT can be reliably correlated with very lean oxidation measurements using compressed sensing (CS), which is simpler to implement than CNN fitting. LTHR can also be predicted via CS analysis, although the correlation quality is somewhat lower than for first-stage IDT. In contrast, the accuracy of total IDT prediction at φ = 1 is significantly lower (within a factor of 4 or worse). Furthermore, these results can be rationalized by the fact that the first-stage IDT and LTHR are primarily determined by low-temperature chemistry, whereas total IDT depends on low-, intermediate-, and high-temperature chemistry. Oxidation reactions are most important at low temperatures, and therefore, measurements of universal molecular markers of oxidation do not capture the full chemical complexity required to accurately predict the total IDT even at a single equivalence ratio. As a result, we find that φ-sensitivity of ignition delay cannot be predicted at all using solely correlation with lean low-T chemical speciation measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting fusion ignition at the National Ignition Facility with physics-informed deep learning

Here, an inertial confinement fusion experiment, carried out at the National Ignition Facility, has achieved ignition by generating fusion energy exceeding the laser energy that drove the experiment. Prior to the experiment, a generative machine learning model that combines radiation hydrodynamics simulations, deep learning, experimental data, and Bayesian statistics was used to predict, with a probability greater than 70%, that ignition was the most likely outcome for this shot.

Spears, Brian K. [Lawrence Livermore National Labo↗

An Experimental Study of Uncertainty Considerations Associated with Predicting Auto-ignition Timing using Livengood-Wu Integral Method

The application of the Livengood-Wu (LW) integral method as a tool to estimate knock onset in spark ignited (SI) engines and combustion phasing in advanced compression ignition (ACI) engines has been demonstrated through simulations several times. In this study, the effect of uncertainties associated with parameters required for the LW integral method, when used as a tool for model based control of ignition timing in an ACI engine, were experimentally studied using five full boiling range gasoline fuels. As a first step, the method was applied to experimental data from a rapid compression machine and it was found that the ability of the LW integral method to predict ignition timing was very sensitive to the performance of the chemical kinetic model of each fuel. The method was subsequently applied to experimental data from a single-cylinder gasoline engine with simple approximations for the LW integral input parameters, and it was found that the predicted time of ignition was significantly different from the actual start of combustion. Systematic evaluation of various parametric uncertainties conducted thereafter showed that the uncertainty in cylinder charge temperature has the greatest influence. Improved methods of estimating cylinder charge temperature are proposed to account for the previously determined corrections, to enable the use of the LW integral method for model based control of ignition timing.

Compression Ignition↗

Modeling Nanosecond-Pulsed Spark Discharge and Flame Kernel Evolution

Dilute combustion, either using exhaust gas recirculation or with excess air, is considered a promising strategy to improve the thermal efficiency of internal combustion engines. However, the dilute air-fuel mixture, especially under intensified turbulence and high-pressure conditions, poses significant challenges for ignitability and combustion stability, which may limit the attainable efficiency benefits. In-depth knowledge of the flame kernel evolution to stabilize ignition and combustion in a challenging environment is crucial for effective engine development and optimization. To date, a comprehensive understanding of ignition processes that result in the development of fully predictive ignition models usable by the automotive industry does not yet exist. Spark-ignition consists of a wide range of physics that includes electrical discharge, plasma evolution, joule-heating of gas, and flame kernel initiation and growth into a self-sustainable flame. In this study, an advanced approach is proposed to model spark-ignition energy deposition and flame kernel growth. To decouple the flame kernel growth from the electrical discharge, a nanosecond-pulsed high-voltage discharge is used to trigger spark-ignition in an optically accessible small ignition test vessel with a quiescent mixture of air and methane. Initial conditions for the flame kernel, including its thermodynamic state and species composition, are derived from a plasma-chemical equilibrium calculation. The geometric shape and dimension of the kernel are characterized using a multi-dimensional thermal plasma solver. Here, the proposed modeling approach is evaluated using a high-fidelity computational fluid dynamics procedure to compare the simulated flame kernel evolution against flame boundaries from companion Schlieren images.

42 ENGINEERING↗

Electron Captures on {sup 14}N as a Trigger for Helium Shell Detonations

White dwarfs (WDs) that accrete helium at rates ∼10{sup −8} M{sub ⊙} yr{sup −1}, such as those in close binaries with sdB stars, can accumulate large (≳0.1 M{sub ⊙}) helium envelopes, which are likely to detonate. We perform binary stellar evolution calculations of sdB+WD binary systems with MESA, incorporating the important reaction chain {sup 14}N(e{sup −},ν){sup 14}C(α,γ){sup 18}O (NCO), including a recent measurement for the {sup 14}C(α,γ){sup 18}O rate. In large accreted helium shells, the NCO reaction chain leads to ignitions at the dense base of the freshly accreted envelope, in contrast to 3α ignitions, which occur away from the base of the shell. In addition, at these accretion rates, the shells accumulate on a timescale comparable to their thermal time, leading to an enhanced sensitivity of the outcome on the accretion rate history. Hence, time dependent accretion rates from binary stellar evolution are necessary to determine the helium layer mass at ignition. We model the observed sdB+WD system CD −30{sup ∘}11223 and find that the inclusion of these effects predicts ignition of a 0.153 M{sub ⊙} helium shell, nearly a factor of two larger than previous predictions. A shell with this mass will ignite dynamically, a necessary condition for a helium shell detonation.

79 ASTRONOMY AND ASTROPHYSICS↗

Parameterization of a Cookoff Model for LX-07

A thermal decomposition model for PBX 9501 (95% HMX, 2.5% Estane® binder, 2.5% BDNPA/F nitro-plasticizer) was implemented by Dickson, et. al. The objective in this study is to estimate parameters associated with this kinetics model so it can be applied to carry out thermal ignition predictions for LX-07 (90% HMX, 10% Viton binder). LX-07 thermal ignition experiments have been carried out using the “Sandia Instrumented Thermal Ignition Apparatus”, SITI. The SITI design consists of solid cylinders (1” diameter × 1” height) of high explosive (HE) confined by a cylindrical aluminum case. An electric heater is wrapped around the outer surface of the case. This heater produces a temperature heating ramp on the outer surface of the case. Internal thermocouples measure the HE temperature rise from the center to locations close to the HE-aluminum interface. The energetic material is heated until thermal ignition occurs. A two–dimensional axisymmetric heat conduction finite element model is used to simulate these experiments. The HE thermal decomposition kinetics is coupled to a heat conduction model trough the definition of an energy source term. The parameters used to define the HE thermal decomposition model are optimized to obtain a good agreement with the experimental time to thermal ignition and temperatures. Also, heat capacity and thermal conductivity of the LX-07 mixture were estimated using temperatures measured at the center of the HE before the solid to solid HMX phase transition occurred.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Analysis of light-off during oxidation of reactant mixtures on Pt/Al 2 O 3 using micro-kinetic models

An elementary step mechanism, which accounts for adsorption, desorption and surface reaction steps is proposed for co-oxidation of CO, propylene, hydrogen and ethane on Pt/Al 2 O 3 . Parameter estimation is used to determine the kinetic parameters for these steps, which depend on platinum loading and dispersion. A micro-kinetic model is proposed for water-gas shift reaction that captures the experimental trend observed during co-oxidation of CO/H 2 . This mechanism is used to predict hysteresis features during oxidation and co-oxidation reactions. The oxidation of all the individual reactants exhibits regular hysteresis and the model predicts the experimentally observed inverse hysteresis during co-oxidation of CO and C 3 H 6 . The inverse hysteresis is caused by surface intermediates formed during C 3 H 6 oxidation. These surface intermediates block the active sites, decreasing the light-off activity of CO during ramp down. The developed micro-kinetic model can also explain steam reforming of propylene and ethane on Pt/Al 2 O 3 . We also compare the predicted hysteresis during CO oxidation by global and micro-kinetic models. The predicted ignition temperature by both global and micro-kinetic models is almost same. However, the predicted extinction temperature by the global and micro-kinetic models is rather different. This behavior is due to different rate determining step during ramp down period.

42 ENGINEERING↗

Primordial Black Hole Triggered Type Ia Supernovae. I. Impact on Explosion Dynamics and Light Curves

Primordial black holes (PBHs) in the asteroid-mass window are compelling dark matter candidates, made plausible by the existence of black holes and by the variety of mechanisms of their production in the early Universe. If a PBH falls into a white dwarf (WD), the strong tidal forces can generate enough heat to trigger a thermonuclear runaway explosion, depending on the WD’s mass and the PBH’s orbital parameters. In this work, we investigate the WD explosion triggered by the passage of a PBH. We perform 2D simulations of the WD undergoing thermonuclear explosion in this scenario, with the predicted ignition site as a parameter assuming the deflagration–detonation transition model. We study the explosion dynamics, and predict the associated light curves and nucleosynthesis. We find that the model sequence predicts light curves which align with the Phillips relation (B max versus ΔM 15 ). Our models hint at a unifying approach in triggering Type Ia supernovae without involving two distinctive evolutionary tracks.

Dark matter↗

Experimental and modeling studies of a biofuel surrogate compound: laminar burning velocities and jet-stirred reactor measurements of anisole

Lignocellulosic biomass is a promising alternative fuel source which can promote energy security, reduce greenhouse gas emissions, and minimize fuel consumption when paired with advanced combustion strategies. Pyrolysis is used to convert lignocellulosic biomass into a complex mixture of phenolic-rich species that can be used in a transportation fuel. Anisole (or methoxybenzene) can be used as a surrogate to represent these phenolic-rich species. Anisole also has attractive properties as a fuel component for use in advanced spark-ignition engines because of its high blending research octane number of 120. Presented in the current work are new measurements of laminar burning velocities, jet-stirred reactor (JSR) speciation of anisole/O 2 /N 2 mixtures, and the development and validation of a detailed chemical kinetic mechanism for anisole. Homogeneous, steady state, fixed gas temperature, perfectly stirred reactor CHEMKIN simulations were used to validate the mechanism against the current JSR measurements and published JSR experiments from CNRS-Nancy. Pyrolysis and oxidation simulations were based on the experimental reactant compositions and thermodynamic state conditions including P = 1 bar and T = 675–1275 K. The oxidation compositions studied in this work span fuel-lean (φ = 0.5), stoichiometric, and fuel rich (φ = 2.0) equivalence ratios. Laminar burning velocities were measured on a heat flux stabilized burner at an unburnt T = 358 K, P = 1 bar and simulated using the CHEMKIN premixed laminar flame speed module. Ignition delay times of anisole were then simulated at conditions relevant to advanced combustion strategies. Current laminar burning velocity measurements and predicted ignition delay times were compared to gasoline components (e.g., n-heptane, iso-octane, and toluene) and gasoline surrogates to highlight differences and similarities in behavior. Reaction path analysis and sensitivity analysis were used to explain the pathways relevant to the current studies. Under pyrolysis and oxidative conditions, unimolecular decomposition of anisole to phenoxy radicals and methyl radicals was found to be important due to the relatively low bond strength between the oxygen and methyl group, ~65 kcal/mol. Finally, reactions of these abundant phenoxy radicals with O 2 were found to be critical to accurately reproduce anisole's reactivity.

10 SYNTHETIC FUELS↗