Revisiting the impact of dissipation on time-reversed one-axis-twist quantum-sensing protocols
Not Available
Koppenhöfer, Martin (ORCID:0000000301623261)↗
SEARCH · Search NASA
Results for “impact dissipation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
On the analytical treatment of impact in finite element modeling
Two simplified impact models which could be used in conjunction with finite element modeling of impacted structures are considered. The two methods are: a previously developed localized finite element impulse-momentum procedure for nondissipative impacts, and a simple gap element consisting of a parallel linear spring and damper useful in dissipative impacts. Results are presented for axial impact of an initially stationary rod. Impulse-momentum theory used in conjunction with finite element modeling was found to result in energy variations unrelated to physical behavior; these variations are reduced as the finite element model is refined.
Jeffrey, Glenda L.↗
Local imaging of diamagnetism in proximity-coupled niobium nanoisland arrays on gold thin films.
In this work, we study the effect of engineered disorder on the local magnetic response of proximity-coupled superconducting island arrays by comparing scanning superconducting quantum interference device (SQUID) susceptibility measurements to a model in which we treat the system as a network of one-dimensional (1D) superconductor-normal-metal-superconductor Josephson junctions, each with a Josephson coupling energy E-J determined by the junction length or distance between islands. We find that the disordered arrays exhibit a spatially inhomogeneous diamagnetic response which, for low local applied magnetic fields, is well described by this junction network model, and we discuss these results as they relate to inhomogeneous 2D superconductors. Our model of the static magnetic response of the arrays does not fully capture the onset of nonlinearity and dissipation with increasing applied field, as these effects are associated with vortex motion due to the dynamic nature of the scanning SQUID susceptometry measurement. This work demonstrates a model 2D superconducting system with engineered disorder, and it highlights the impact of dissipation on the local magnetic properties of 2D superconductors and Josephson junction arrays.
Bishop-Van Horn, Logan↗
Fire and smoke retardant materials development
The research to provide a mechanism for dissipation of impact energy in filled polymers by using fillers with a low modulus coating is reported which will dissipate energy through shearing and crazing instead of fracture. The approach offers the advantages of low cost, low toxicity, and applicability to various resins.
Mueller, W. A.↗
Improved Damage Resistant Composite Materials Incorporating Shape Memory Alloys
Metallic shape memory alloys (SMA) such as nitinol have unique shape recovery behavior and mechanical properties associated with a material phase change that have been used in a variety of sensing and actuation applications. Recent studies have shown that integrating nitinol-SMA actuators into composite materials increases the composite material's functionality. Hybrid composites of conventional graphite/epoxy or glass/epoxy and nitinol-SMA elements can perform functions in applications where monolithic composites perform inadequately. One such application is the use of hybrid composites to function both in load bearing and armor capacities. While monolithic composites with high strength-to-weight ratios function efficiently as loadbearing structures, because of their brittle nature, impact loading can cause significant catastrophic damage. Initial composite failure modes such as delamination and matrix cracking dissipate some impact energy, but when stress exceeds the composite's ultimate strength, fiber fracture and material perforation become dominant. One of the few methods that has been developed to reduce material perforation is hybridizing polymer matrix composites with tough kevlar or high modulus polyethynylene plies. The tough fibers increase the impact resistance and the stiffer and stronger graphite fibers carry the majority of the load. Similarly, by adding nitinol-SMA elements that absorb impact energy through the stress-induced martensitic phase transformation, the composites' impact perforation resistance can be greatly enhanced. The results of drop-weight and high velocity gas-gun impact testing of various composite materials will be presented. The results demonstrate that hybridizing composites with nitinol-SMA elements significantly increases perforation resistance compared to other traditional toughening elements. Inspection of the composite specimens at various stages of perforation by optical microscope illustrates the mechanisms by which perforation is initiated. Results suggest that the out-of-plane transverse shear properties of the composite and nitinol elements have a significant effect on the perforation resistance. Applications that can utilize the hybrid composites effectively will also be presented with the experimental studies.
Paine, Jeffrey S. N.↗
The Influence of Carbon Fiber Composite Specimen Design Parameters on Artificial Lightning Strike Current Dissipation and Material Thermal Damage
Previous artificial lightning strike direct effect research has examined a broad range of specimen design parameters. No works have studied how such specimen design parameters and electrical boundary conditions impact the dissipation of electric current flow through individual plies. This article assesses the influence of carbon fiber composite specimen design parameters (design parameters = specimen size, shape, and stacking sequence) and electrical boundary conditions on the dissipation of current and the spread of damage resulting from Joule heating. Thermal-electric finite element (FE) modelling is used and laboratory scale (<1 m long) and aircraft scale (>1 m long) models are generated in which laminated ply current dissipation is predicted, considering a fixed artificial lightning current waveform. The simulation results establish a positive correlation between the current exiting the specimen from a given ply and the amount of thermal damage in that ply. The results also establish that the distance to ground, from the strike location to the zero potential boundary conditions (ground), is the controlling factor which dictates the electric current dissipation in each ply. Significantly, this distance to ground is dependent on each of the specimen shape, dimensions, stacking sequence, and location of ground boundary conditions. Therefore, it is not possible to decouple current dissipation and damage from specimen design and boundary condition setup. However, it is possible to define a specimen size for a given specimen shape, stacking sequence, and waveform which limit the influence of specimen dimensions on the resulting current distribution and damage. For a rectangular specimen design which appears in literature multiple times, as 100 × 150 mm and with a stacking sequence of [45/0/-45/90] 4s , a specimen design of greater than 300 × 200 mm is required to limit the influence of specimen dimensions on current distribution and damage.
36 MATERIALS SCIENCE↗
Analysis of energy dissipation and deposition in elastic bodies impacting at hypervelocities
A series of impact problems were analyzed using the Eulerian hydrocode CTH. The objective was to quantify the amount of energy dissipated locally by a projectile-infinite plate impact. A series of six impact problems were formulated such that the mass and speed of each projectile were varied in order to allow for increasing speed with constant kinetic energy. The properties and dimensions of the plate were the same for each projectile impact. The resulting response of the plate was analyzed for global Kinetic Energy, global momentum, and local maximum shear stress. The percentage of energy dissipated by the various hypervelocity impact phenomena appears as a relative change of shear stress at a point away from the impact in the plate.
Medina, David F.↗
Dissipation and Bathymetric Sensitivities in an Unstructured Mesh Global Tidal Model
Abstract The mechanisms and geographic distribution of global tidal dissipation in barotropic tidal models are examined using a high resolution unstructured mesh finite element model. Mesh resolution varies between 2 and 25 km and is especially focused on inner shelves and steep bathymetric gradients. Tidal response sensitivities to bathymetric changes are examined to put into context response sensitivities to frictional processes. We confirm that the Ronne Ice Shelf dramatically affects Atlantic tides but also find that bathymetry in the Hudson Bay system is a critical control. We follow a sequential frictional parameter optimization process and use TPXO9 data‐assimilated tidal elevations as a reference solution. From simulated velocities and depths, dissipation within the global model is estimated and allows us to pinpoint dissipation at high resolution. Boundary layer dissipation is extremely focused with 1.4% of the ocean accounting for 90% of the total. Internal tide friction is much more distributed with 16.7% of the ocean accounting for 90% of the total. Often highly regional dissipation can impact basin‐scale and even ocean wide tides. Optimized boundary layer friction parameters correlate very well with the physical characteristics of the locality with high friction factors associated with energetic tidal regions, deep ocean island chains, and ice covered areas. Global complex M 2 tide errors are 1.94 cm in deep waters. Total global boundary layer and internal tide dissipation are estimated, respectively, at 1.83 and 1.49 TW. This continues the trend in the literature toward attributing more dissipation to internal tides.
54 ENVIRONMENTAL SCIENCES↗
The intact capture of hypervelocity dust particles using underdense foams
The impact of a hypervelocity projectile (greater than 3 km/s) is a process that subjects both the impactor and the impacted material to a large transient pressure distribution. The resultant stresses cause a large degree of fragmentation, melting, vaporization, and ionization (for normal densities). The pressure regime magnitude, however, is directly related to the density relationship between the projectile and target materials. As a consequence, a high-density impactor on a low-density target will experience the lowest level of damage. Historically, there have been three different approaches toward achieving the lowest possible target density. The first employs a projectile impinging on a foil or film of moderate density, but whose thickness is much less than the particle diameter. This results in the particle experiencing a pressure transient with both a short duration and a greatly reduced destructive effect. A succession of these films, spaced to allow nondestructive energy dissipation between impacts, will reduce the impactor's kinetic energy without allowing its internal energy to rise to the point where destruction of the projectile mass will occur. An added advantage to this method is that it yields the possibility of regions within the captured particle where a minimum of thermal modification has taken place. Polymer foams have been employed as the primary method of capturing particles with minimum degradation. The manufacture of extremely low bulk density materials is usually achieved by the introduction of voids into the material base. It must be noted, however, that a foam structure only has a true bulk density of the mixture at sizes much larger than the cell size, since for impact processes this is of paramount importance. The scale at which the bulk density must still be close to that of the mixture is approximately equal to the impactor. When this density criterion is met, shock pressures during impact are minimized, which in turn maximizes the probability of survival for the impacting particle. The primary objectives of the experiment are to (1) Examine the morphology of primary and secondary hypervelocity impact craters. Primary attention will be paid to craters caused by ejecta during hypervelocity impacts of different substrates. (2) Determine the size distribution of ejecta by means of witness plates and collect fragments of ejecta from craters by means of momentum-sensitive mcropore foam. (3) Assess the directionality of the flux by means of penetration-hole alignment of thin films placed above the cells. (4) Capture intact the particles that perforated the thin film and entered the cell. Capture media consisted of both previously flight-tested micropore foams and aerogel. The foams had different latent heats of fusion and, accordingly, will capture particles over a range of momenta. Aerogel was incorporated into the cells to determine the minimum diameter than can be captured intact.
Maag, Carl R.↗
Instabilities and phase transitions in architected metamaterials: a gradient-enhanced continuum approach
Architected metamaterials such as foams and lattices exhibit a wide range of properties governed by microstructural instabilities and emerging phase transitions. Their macroscopic response–including energy dissipation during impact, large recoverable deformations, morphing between configurations, and auxetic behavior–remains difficult to capture with conventional continuum models, which often rely on discrete approaches that limit scalability. In this work, we propose a nonlocal continuum formulation that captures both stable and unstable responses of elastic architected metamaterials. The framework extends anisotropic hyperelasticity by introducing nonlocal variables and internal length scales reflective of microstructural features. Local polyconvex free-energy models are systematically augmented with two families of non-(poly)convex energies, enabling both metastable and bistable responses. Implementation in a finite element framework enables solution using a hybrid monolithic–staggered strategy. Simulations capture densification fronts, forward and reverse transitions, hysteresis loops, imperfection sensitivity, and globally coordinated auxetic modes. Overall, this framework provides a robust foundation for accelerated modeling of instability-driven phenomena in architected metamaterials, while enabling extensions to anisotropic, dissipative, and active systems as well as integration with data-driven and machine learning approaches.
42 ENGINEERING↗
Increased damping through captured powder in additive manufacturing
This paper describes the retention of metal powder within additively manufactured structures to achieve increased damping. In this work, solid and hollow (powder filled) aluminum cylinders were fabricated in using laser powder bed fusion where the internal, captured powder in the hollow cylinders served as an energy dissipation mechanism. Impact testing was completed to compare the frequency response functions of three cylinder geometries: one solid cross-section and two hollow cross-sections with different inner diameters and, therefore, different powder volumes. Increased damping with larger inner diameter was observed. The damping was quantified using a structural damping model.
36 MATERIALS SCIENCE↗
Lessons Learned from US Experience with Biofuels: Comparing the Hype with the Evidence
Biofuel production in the United States, primarily from corn, has more than doubled since 2007, leading to concerns about its unintended consequences for agricultural and fuel markets. To examine the validity of these concerns and inform the debate about biofuels and their impacts, we review ex ante projections and ex post evidence of the effects of biofuels on land use, food and fuel prices, and greenhouse gas (GHG) emissions. We find that biofuels expansion contributed to an initial significant increase in agricultural commodity prices, but these impacts have dissipated over time as crop productivity has increased and cropping patterns have changed. Simulated estimates of indirect land use change and the related GHG emissions intensity of biofuels have also declined sharply from their early levels, which is consistent with ex post evidence. Additionally, growth in biofuel production caused a very modest reduction in fossil fuel prices, implying a small fuel rebound effect. Overall, estimates imply that first-generation biofuels from corn have a lower carbon intensity than gasoline. Lastly, learning by doing, economies of scale, and technological improvements have made biofuels from corn increasingly competitive, reducing the need for subsidies and import tariffs. We conclude with a discussion of the lessons learned from the US biofuels experience.
09 BIOMASS FUELS↗
Measuring Loss Tangents of Substrates for Superconducting Qubits with Part-per-Billion Precision
We report precision measurements of dielectric loss tangents in substrates for superconducting qubits using an ultra-high quality factor niobium SRF cavity operating at millikelvin temperatures and low electric fields. Multiple substrate types and surface treatments are compared to assess how processing impacts microwave dissipation. The RF results are correlated with materials analysis, including ToF-SIMS and XPS, to identify dominant loss mechanisms. This combined study links microscopic surface chemistry to macroscopic performance and provides a framework for materials-driven improvements in qubit coherence and device design.
Bafia, Daniel [Fermilab]↗
Measuring Loss Tangents of Substrates for Superconducting Qubits with Part-per-Billion Precision
We report precision measurements of dielectric loss tangents in substrates for superconducting qubits using an ultra-high quality factor niobium SRF cavity operating at millikelvin temperatures and low electric fields. Multiple substrate types and surface treatments are compared to assess how processing impacts microwave dissipation. The RF results are correlated with materials analysis, including ToF-SIMS and XPS, to identify dominant loss mechanisms. This combined study links microscopic surface chemistry to macroscopic performance and provides a framework for materials-driven improvements in qubit coherence and device design.
Bafia, Daniel [Fermilab]↗
The Function of Horn Ridges for Impact Damping
This study explores the damping effects of ram horn ridges on mechanical impacts resulting from ramming. We measured the amplitudes and frequencies of ridges along the axial (pitch) direction of the ridges of ram horns obtained from eight specimens across six different species. While the horns shared a similar spiral-shaped pattern with surface ridges, our findings show variations among the horns, including ridge spacing and growth trends. Additionally, we employed finite element analysis (FEA) to compare a ridged horn model with a non-ridged counterpart to provide an understanding of the damping characteristics of the surface ridges. Our FEA results reveal that the ridged horn decreased the initial ramming pressure by 20.7%, increased the shear stress by 66.9%, and decreased the axial strain by 27.3%, the radial strain by 16.7%, and the shear strain by 14.3% at a 50 ms impact duration compared to those of the non-ridged horn. The damping ratio was increased by 7.9% because of the ridges. This study elucidates three primary functions of the different species of ram horns’ spirals and ridges: (1) to transfer longitudinal waves into shear waves, (2) to filter shear waves, and (3) to stabilize the structure by mitigating excessive strain.
bio-inspired design↗
Monte Carlo simulation of the jet stream process
A Monte Carlo model is formulated to simulate the orbital evolution of a system of colliding particles. It is found that inelastic collision alone (even if the impact energy dissipation from collision is very large) does not lead to the formation of a narrow ring-like jet stream; instead, a flat disk structure, similar to Saturn's rings, usually results. To produce the radial focusing effect, it is argued that additional dynamical effects, which would strengthen the collisional interaction between the particles in near-circular orbits, is needed.
Ip, W.-H.↗
Climatology of Mesosphere and Lower Thermosphere Residual Circulations and Mesopause Height Derived From SABER Observations
In the mesosphere and lower thermosphere (MLT) region, residual circulations driven by gravity wave breaking and dissipation significantly impact constituent distribution and the height and temperature of the mesopause. The distribution of CO2 can be used as a proxy for the residual circulations. Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) CO2 volume mixing ratio (VMR) and temperature measurements from 2003 to 2020 are used to study the monthly climatology of MLT residual circulations and the mesopause height. Our analyses show that (a) mesopause height strongly correlates with the CO2 VMR vertical gradient during solstices; (b) mesopause height has a discontinuity at midlatitude in the summer hemisphere, with a lower mesopause height at mid-to-high latitudes as a result of adiabatic cooling driven by strong adiabatic upwelling; (c) the residual circulations have strong seasonal variations at mid-to-high latitudes, but they are more uniform at low latitudes; and (d) the interannual variability of the residual circulations and mesopause height is larger in the Southern Hemisphere (SH; 4–5 km) than in the Northern Hemisphere (NH; 0.5–1 km).
SABER↗
The importance of capturing unmodified chondritic porous micrometeorites on the space station
The survival of interplanetary dust particles (IDP's) during deceleration by the Earth's atmosphere is determined by their entry parameters, velocity, size and mass. These IDP's reach their terminal velocity at about 55 to 95 km altitude before they gradually settle to 18 to 21 km altitude where they are collected by high flying aircraft. Chondritic porous IDP's (also called chondritic porous (CP) aggregates) show properties consistent with an extraterrestrial origin. It is conceivable that CP aggregates may be collected above the Earth's atmosphere using capture devices on a space station or satellite. In order to preserve pristine CP aggregates, i.e., aggregates with minimal perturbation or degradation of its particulate matter, it is necessary to transfer the kinetic energy on impact so that a minimum amount of energy is dissipated into the impacting particle. It is likely that low-temperature minerals (e.g., layer silicates), volatile phases (e.g., sulfides), structural defects (e.g. nuclear tracks) and hydrocarbons in CP aggregates are sensitive to the efficiency of kinetic energy dissipation.
Rietmeijer, F. J. M.↗