Search NASA⌕ Search

SEARCH · Search NASA

Results for “impression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Empirical Analysis of the Subjective Impressions and Objective Measures of Domain Scientists’ Visual Analytic Judgments

Scientists often use specific data analysis and presentation methods familiar within their domain. But does high familiarity drive better analytical judgment? This question is especially relevant when familiar methods themselves can have shortcomings: many visualizations used conventionally for scientific data analysis and presentation do not follow established best practices. This necessitates new methods that might be unfamiliar yet prove to be more effective. But there is little empirical understanding of the relationships between scientists’ subjective impressions about familiar and unfamiliar visualizations and objective measures of their visual analytic judgments. To address this gap and to study these factors, we focus on visualizations used for comparison of climate model performance. We report on a comprehensive survey-based user study with 47 climate scientists and present an analysis of : i) relationships among scientists’ familiarity, their perceived lev- els of comfort, confidence, accuracy, and objective measures of accuracy, and ii) relationships among domain experience, visualization familiarity, and post-study preference.

Dasgupta, Aritra↗

Unique p-n Heterostructured Water-Borne Nanoparticles Exhibiting Impressive Charge-Separation Ability

The ecofriendly synthesis of organic semiconductors with heterojunctions is of interest and requires surfactants to stabilize colloidal nanoparticles (NPs) in aqueous solution. The use of conventional surfactants results in p-n heterostructured NPs, in which both p- and n-type semiconductors are phase separated and confined within a core surrounded by the surfactant shell. The performances of these devices, however, are not comparable to those of solid organic semiconductor films. Further efforts are required to understand and control the morphological structure of the nanoparticles to improve their performances. Here, by using a new class of polyethyleneglycol-based surfactant, PEG-C60, we synthesized unique p-n heterostructured water-borne NPs that comprise a p-type semiconductor core and an n-type PEG-C60 shell. We demonstrate that the morphology gives rise to charge separation superior to conventional water-borne NPs. These PEG-C60-based water-borne NPs can, thus, provide a new paradigm in the current field of water-based organic semiconductor colloids.

Water-borne nanoparticles, Water-based colloids, P↗

Influence of Ca and Sr Addition on Impression Creep Behavior of Mg-4Al-RE Alloy

The impression creep behavior of Mg-4Al-RE-0.8Ca-0.2Sr (AEXJ4110) alloy was investigated under the applied stresses of 55, 75, 95 MPa and the temperatures of 398, 423, 448 K on a special apparatus. The results showed that the microstructure of AEXJ4110 alloy consisted of acicular Al{sub 11}La{sub 3}, granular Al{sub 2}La, bone shape Al{sub 2}Ca and fish-bone shape Al{sub 4}Sr. The impression creep resistance of AE41 alloy was improved by adding Ca and Sr. The primary impression creep depth of AEXJ4110 alloy was increased with increasing applied stress and temperature. The creep strain rates of AEXJ4110 alloy under different stresses and temperatures were a power function of time. The constitutive equation of steady-state impression creep for AEXJ4110 alloy can be written as ε-dot {sub s}=9.71×10{sup −3}(E/T)(σ/E){sup 4.3}exp ((−100.449+3368.98(σ/E))/RT) with stress exponent n 4.3 and creep activation energy Q{sub c} about 100.449 kJ/mol. The impression creep mechanism of AEXJ4110 alloy in the temperature range of 398-448 K and stress range of 55-95 MPa is controlled by dislocation climb dominated by self-diffusion of magnesium atoms impeded by the precipitated phases with high melting temperatures.

36 MATERIALS SCIENCE↗

Effect of Boron Addition on Creep Strain during Impression Creep of P91 Steel

In an attempt to understand the effect of boron addition on creep deformation behavior under high stress and high temperature in martensitic P91 steel, impression creep tests were carried out on boron-free P91 (P91) and boron-added P91 (P91B) steels. The experimental program consisted of three steps, i.e., characterization of as-received steels by microhardness, optical microscopy (OM), transmission electron microscopy (TEM), electron backscattered diffraction (EBSD) and wavelength-dispersive spectroscopy (WDS); impression creep tests at 445 MPa and 625 °C on as-received steels; characterization at deformed plastic zones of impression-crept specimens by microhardness, OM, EBSD, TEM and WDS. Impression creep tests were run till a depth of penetration of 1.8 mm was achieved for both cases which ensured a sufficient plastic zone underneath indenter for subsequent microstructural investigations. Coarsening of M{sub 23}C{sub 6} carbides was observed in P91 steel during high-temperature creep loading, which leads to extensive strain hardening in deformed plastic region, resulting in impaired creep performance. On the contrary, dynamic recrystallization in P91B steel results in formation of small strain-free grains during creep loading which are responsible for increased resistance of the material to shear stresses during an impression creep test.

36 MATERIALS SCIENCE↗

Impressed Sources and Fields in the Volume-Integral-Equation Formulation of Electromagnetic Scattering by a Finite Object: A Tutorial

Although free space cannot generate electromagnetic waves, the majority of existing accounts of frequency-domain electromagnetic scattering by particles and particle groups are based on the postulate of existence of an impressed incident field, usually in the form of a plane wave. In this tutorial we discuss how to account for the actual existence of impressed source currents rather than impressed incident fields. Specifically, we outline a self-consistent theoretical formalism describing electromagnetic scattering by an arbitrary finite object in the presence of arbitrarily distributed impressed currents, some of which can be far removed from the object and some can reside in its vicinity, including inside the object. To make the resulting formalism applicable to a wide range of scattering-object morphologies, we use the framework of the volume integral equation formulation of electromagnetic scattering, couple it with the notion of the transition operator, and exploit the fundamental symmetry property of this operator. Among novel results, this tutorial includes a streamlined proof of fundamental symmetry (reciprocity) relations, a simplified derivation of the Foldy equations, and an explicit analytical expression for the transition operator of a multi-component scattering object.

Symmetry relations↗

Objective analysis of impressed chisel toolmarks

Historical and recent challenges to the practice of comparative forensic examination have created a driving force for the formation of objective methods for toolmark identification. In this study, fifty sequentially manufactured chisels were used to create impression toolmarks in lead (500 toolmarks total). An algorithm previously used to statistically separate known matching and nonmatching striated screwdriver marks and quasi-striated plier marks was used to evaluate the chisel marks. Impression toolmarks, a more complex form of toolmark, pose a more difficult test for the algorithm that was originally designed for striated toolmarks. Lastly, results show in this instance that the algorithm can separate matching and nonmatching impression marks, providing further validation of the assumption that toolmarks are identifiably unique.

47 OTHER INSTRUMENTATION↗

A method for the compensation of the effects of surface cloth impressions on polar backscatter applied to porous epoxy and biaxial graphite/epoxy composites

The anisotropy of polar backscatter from graphite/epoxy composites is a potentially useful parameter for the characterization of porosity levels. However, the effects of release-cloth impressions on measured integrated polar backscatter levels are sufficient to inhibit the detection of porosity with this method. Recently, we developed a theoretical model to predict the frequency distribution of the backscattered power along the high-symmetry directions of release-cloth impressions. This study investigates experimentally the usefulness of limiting the bandwidth to regions not dominated by the scattering from the surface impressions, hence increasing the probability of detecting flaws such as porosity.

Madaras, Eric I.↗

Tool for Taking Clay Impressions

Clay impression of small parts taken with tool consisting of hollow tube closed at one end. Slots at other end admit part short distance into tube. Impression used to make silicone rubber mold for examination.

Duncan, R. S.↗

Effects of bleeder cloth impressions on the use of polar backscatter to detect porosity

The influence of the nature of the composite's surface on ultrasonic polar backscatter measurements for detecting and characterizing porosity in composite laminates is studied, focusing on the effects of bleeder cloth impressions noted by Bar-Cohen (1987). The results indicate that the presence of the bleeder cloth impressions substantially influences the degree of anisotropy. It is found that, for relatively thin samples in which selective time gating is not feasible, the state of the insonified surface and the state of the back surface both influence the received signal.

Handley, S. M.↗

Measured effects of surface cloth impressions on polar backscatter and comparison with a reflection grating model

This paper focuses on the nature of a typical composite surface and its effects on scattering. Utilizing epoxy typical of that in composites and standard composite fabrication methods, a sample with release cloth impressions on its surface is produced. A simple model for the scattering from the surface impressions of this sample is constructed and then polar backscatter measurements are made on the sample and compared with the model predictions.

Madaras, Eric I.↗

Impression Testing of Self-Healing Polymers

As part of the BIOSANT program (biologically-inspired smart nanotechnology), scientists at NASA-Langley have identified a "self-healing" plastic that spontaneously closes the hole left by the passage of a bullet. To understand and generalize the phenomenon in question, the mechanical properties responsible for this ability are being explored. Low-rate impression testing was chosen to characterize post-yield material properties, and it turned out that materials that heal following ballistic puncture also show up to 80% healing of the low-rate impression. Preliminary results on the effects of temperature and rate of puncture are presented.

Hinkley, Jeffrey A.↗

Addendum to "Impressed Sources and Fields in the Volume-Integral-Equation Formulation of Electromagnetic Scattering by a Finite Object: A Tutorial"

Our recent tutorial referred to in the title has summarized a general theoretical formalism of electromagnetic scattering by an arbitrary finite object in the presence of arbitrarily distributed impressed currents. This addendum builds on the tutorial to provide a streamlined discussion of specific far-field limits and the corresponding reciprocity relations by introducing appropriate far-field operators and linear maps and deriving the reciprocity relations through the pseudo adjoint of these maps. We thereby extend the compact operator calculus used previously to consider the fields and sources near or inside the scattering object.

Impressed Sources↗

Formability of a wrought Mg alloy evaluated by impression testing

This study is focused on furthering our understanding of the different factors that influence the formability of Magnesium alloys. Towards this end, formability studies were undertaken on a wrought Mg-2Zn-1Mn (ZM21) alloy. In contrast to conventional formability studies, the impression testing method was adopted here to evaluate the formability parameter, B, at temperatures ranging from 298 to 473 K. The variation of B of ZM21 with temperature and its rather limited values were discussed in the light of different deformation mechanisms such as activation of twinning, slip, grain boundary sliding (GBS) and dynamic recrystallization (DRX). It was found that the material characteristics such as grain size, texture and testing conditions such as temperature and strain rate, were key determinants of the mechanism of plastic deformation. A by-product of this analysis was the observation of an interesting correlation between the Zener-Hollomon parameter, Z, and the ability of Mg alloys to undergo DRX.

Formability↗

Impressions of the Meson Spectrum: Hybrids & Exotics, present and future

It has long been expected that the spectrum of hadrons in QCD would be far richer and extensive than experiment has so far revealed. While there have been experimental hints of this richness for some time, it is really only in the last few years that dramatic progress has been seen in the exploration both experimentally and in calculations on the lattice. Precision studies enabled by new technology both with detectors and high performance computations are converging on an understanding of the spectrum in strong coupling QCD. These methodologies are laying the foundation for a decade of potential discovery that electro and photoproduction experiments at Jefferson Lab, which when combined with key results on B and charmonium decays from both e+e? and pp colliders, should turn mere impressions of the light meson spectrum into a high definition picture.

Pennington, Michael R.↗

Observations and impressions from lunar orbit

On Apollo 16, the command module pilot made observations of particular surface features and processes to complement photographic and other remotely sensed data. Emphasis was placed on geological problems that required the extreme dynamic range and color sensitivities of the human eye; repetitive observations of varying sun angles and viewing directions; and, in some cases, on-the-scene interpretations. Visual observations and impressions recorded during the mission verified the effectiveness of the hardware and techniques used. The orbiting observer functioned both as a sensor, in otherwise inaccessible areas such as earthshine and shadows, and as a designator of potentially significant data that were acquired on the photographic record.

Mattingly, T. K.↗

Borescope Device Takes Impressions In Ducts

Maneuverable device built around borescope equipped to make impression molds of welded joints in interior surfaces of ducts. Molds then examined to determine degress of mismatch in welds. Inserted in duct, and color-coded handles on ends of cables used to articulate head to maneuver around corners. Use of device fairly easy and requires little training.

Walter, Richard F.↗

Method and apparatus for non-destructive evaluation of composite materials with cloth surface impressions

A method and related apparatus for nondestructive evaluation of composite materials by determination of the quantity known as Integrated Polar Backscatter, which avoids errors caused by surface texture left by cloth impressions by identifying frequency ranges associated with peaks in a power spectrum for the backscattered signal, and removing such frequency ranges from the calculation of Integrated Polar Backscatter for all scan sites on the composite material is presented.

Madras, Eric I.↗