Search NASA⌕ Search

SEARCH · Search NASA

Results for “impurity disorder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Resolving Configurational Disorder for Impurities in a Low-Entropy Phase

Hematite (α-Fe 2 O 3 ) exerts a strong control over the transport of minor but critical metals in the environment and is used in multiple industrial applications; the photocatalysis community has explored the properties of hematite nanoparticles over a wide range of transition metal dopants. Nonetheless, simplistic assumptions are used to rationalize the local coordination environment of impurities in hematite. Here, we use ab initio molecular dynamics (AIMD)-guided structural analysis to model the extended X-ray absorption fine structure (EXAFS) of Cu 2+ - and Zn 2+ -doped hematite nanoparticles. Specific defect–impurity associations were identified, and the local coordination environments of Cu and Zn both displayed considerable configurational disorder that, in aggregate, approached Jahn–Teller-like distortion for Cu but, in contrast, maintained hematite-like symmetry for Zn. This study highlights the role of defects in accommodating impurities in a nominally low-entropy phase and the limits to traditional shell-by-shell fitting of EXAFS for dopants/impurities in unprecedented bonding environments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Niobium in the clean limit: An intrinsic type-I superconductor

Niobium is one of the most researched superconductors, both theoretically and experimentally. It is enormously significant in all branches of superconducting applications, from powerful magnets to quantum computing. It is therefore imperative to understand its fundamental properties in great detail. In this work, we use the results of recent microscopic calculations of anisotropic electronic, phonon, and superconducting properties, and apply a thermodynamic criterion for the type of superconductivity, more accurate and straightforward than a conventional Ginzburg-Landau parameter κ-based delineation, to show that pure niobium is a type-I superconductor in the clean limit. However, disorder (impurities, defects, strain, stress) pushes it to become a type-II superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Electromagnetic Response of Superconducting RF Cavities

Recently reported anomalies in frequency shift of order δƒ ~ 0.1–10 kHz for Niobium SRF cavities in a narrow temperature region near T c ≃ 9 K are sensitive to the surface preparation and Nitrogen doping. We developed methods for calculating the surface current response of Nb SRF cavities, as well as the resonant frequency shift and quality factor, as functions of temperature, frequency and disorder based on the Keldysh formulation of the theory for nonequilibrium superconductivity coupled with Maxwell’s theory and boundary conditions for the response functions and electromagnetic field. We show that the anomaly is sensitive to impurity disorder. Our results for the anomaly in the frequency shift are in good agreement with experimental results for Nb with an anisotropic gap on the Fermi surface and inhomogeneous non-magnetic disorder. We also show that the quality factor as a function of the impurity scattering rate is maximum for in SRF cavities with intermediate disorder, ℏ/τΔ~O(1) with the maximum $Q$ decreasing with increasing frequency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Polar Nanodomains in a Ferroelectric Superconductor

The mechanisms by which itinerant carriers compete with polar crystal distortions is a key unresolved issue for polar superconductors, which offer new routes to unconventional Cooper pairing. Strained, doped SrTiO 3 films undergo successive ferroelectric and superconducting transitions, making them ideal candidates to elucidate the nature of this competition. Here, we reveal these interactions using scanning transmission electron microscopy studies of the evolution of polar nanodomains as a function of doping. These nanodomains are a precursor to the ferroelectric phase and a measure of long-range Coulomb interactions. With increasing doping, the magnitude of the polar displacements, the nanodomain size, and the Curie temperature are systematically suppressed. In addition, we show that disorder caused by the dopant atoms themselves presents a second contribution to the destabilization of the ferroelectric state. Furthermore, the results provide evidence for two distinct mechanisms that suppress the polar transition with doping in a ferroelectric superconductor.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Disentangling Electronic Transport and Hysteresis at Individual Grain Boundaries in Hybrid Perovskites via Automated Scanning Probe Microscopy

Underlying the rapidly increasing photovoltaic efficiency and stability of metal halide perovskites (MHPs) is the advancement in the understanding of the microstructure of polycrystalline MHP thin film. Over the past decade, intense efforts have been aimed at understanding the effect of microstructures on MHP properties, including chemical heterogeneity, strain disorder, phase impurity, etc. It has been found that grain and grain boundary (GB) are tightly related to lots of microscale and nanoscale behavior in MHP thin films. Atomic force microscopy (AFM) is widely used to observe grain and boundary structures in topography and subsequently to study the correlative surface potential and conductivity of these structures. For now, most AFM measurements have been performed in imaging mode to study the static behavior; in contrast, AFM spectroscopy mode allows us to investigate the dynamic behavior of materials, e.g., conductivity under sweeping voltage. However, a major limitation of AFM spectroscopy measurements is that they require manual operation by human operators, and as such only limited data can be obtained, hindering systematic investigations of these microstructures. Here, we designed a workflow combining the conductive AFM measurement with a machine learning (ML) algorithm to systematically investigate grain boundaries in MHPs. The trained ML model can extract GBs locations from the topography image, and the workflow drives the AFM probe to each GB location to perform a current–voltage (IV) curve automatically. Then, we are able to have IV curves at all GB locations, allowing us to systematically understand the property of GBs. Using this method, we discovered that the GB junction points are less conductive, potentially more photoactive, and can play critical roles in MHP stability, while most previous works only focused on the difference between GB and grains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Pick-and-Place Transfer of Arbitrary-Metal Electrodes for van der Waals Device Fabrication

Van der Waals electrode integration is a promising strategy to create nearly perfect interfaces between metals and 2D materials, with advantages such as eliminating Fermi-level pinning and reducing contact resistance. However, the lack of a simple, generalizable pick-and-place transfer technology has greatly hampered the wide use of this technique. Here, we demonstrate the pick-and-place transfer of prefabricated electrodes from reusable polished hydrogenated diamond substrates without the use of any sacrificial layers due to the inherent low-energy and dangling-bond-free nature of the hydrogenated diamond surface. The technique enables transfer of arbitrary-metal electrodes and an electrode array, as demonstrated by successful transfer of eight different elemental metals with work functions ranging from 4.22 to 5.65 eV. We also demonstrate the electrode array transfer for large-scale device fabrication. The mechanical transfer of metal electrodes from diamond to van der Waals materials creates atomically smooth interfaces with no interstitial impurities or disorder, as observed with cross-section high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. As a demonstration of its device application, we use the diamond transfer technique to create metal contacts to monolayer transition metal dichalcogenide semiconductors with high-work-function Pd, low-work-function Ti, and semimetal Bi to create n- and p-type field-effect transistors with low Schottky barrier heights. We also extend this technology to air-sensitive materials (trilayer 1T’ WTe 2 ) and other applications such as ambipolar transistors, Schottky diodes, and optoelectronics. This highly reliable and reproducible technology paves the way for new device architectures and high-performance devices.

2D materials↗
DOE OSTI2024

Electronic conductivity in metal-graphene composites: the role of disordered carbon structures, defects, and impurities

Abstract This paper explores the transport properties of aluminum-carbon composite material via ab initio methods. Interfacial and electronic dynamics of the aluminum-graphene interface structure were investigated using models of amorphous graphene added to an aluminum matrix. We examine the impact on electronic conduction caused by the presence of nitrogen impurities within the interfacial amorphous graphene layer. We elucidate the conduction mechanisms by using a projection of the electronic conductivity into space.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Anomalous Hall effects in chiral superconductors

We report theoretical results for the electronic contribution to thermal and electrical transport for chiral superconductors belonging to even or odd-parity E 1 and E 2 representations of the tetragonal and hexagonal point groups. Chiral superconductors exhibit novel properties that depend on the topology of the order parameter and Fermi surface, and—as we highlight—the structure of the impurity potential. An anomalous thermal Hall effect is predicted and shown to be sensitive to the winding number, ν, of the chiral order parameter via Andreev scattering that transfers angular momentum from the chiral condensate to excitations that scatter off the random potential. For heat transport in a chiral superconductor with isotropic impurity scattering, i.e., point-like impurities, a transverse heat current is obtained for ν = ± 1, but vanishes for | ν | > 1. This is not a universal result. For finite-size impurities with radii of order or greater than the Fermi wavelength, R ≥ ℏ / p f, the thermal Hall conductivity is finite for chiral order with | ν | ≥ 2, and determined by a specific Fermi-surface average of the differential cross-section for electron-impurity scattering. Our results also provide quantitative formulae for analyzing and interpreting thermal transport measurements for superconductors predicted to exhibit broken time-reversal and mirror symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Quantum Quench Dynamics–Crossover Phenomena in Nonequilibrium Correlated Quantum Systems (Final Technical Report)

In this project we have developed analytical and numerical tools to study the interplay between interactions, dimensionality, fluctuations and disorder in quantum impurity systems. We have studied the transient dynamics following a quench, i.e. the sudden change in a control variable of the model Hamiltonian, which offers a unique way to examine the system’s spatial, temporal and energetic structure. Specifically, we have investigated how crossover scales, i.e. given by Kondo couplings, are affected by disorder. We have addressed a wide range of phenomena, such as the effects of static disorder on dynamical screening of magnetic impurities, and the influence of a fully time-fluctuating bath environment on the dephasing of system qubits. We have found that many of these systems exhibit fascinating counterintuitive behavior, such as e.g. the possibility of asymptotic unitary time evolution in specifically conditioned system-bath Hamiltonians. From a technical point of view, we have developed a supersymmetric formalism to analyze scaling functions of disordered quantum impurity spin chains, we generalized the strong-coupling real-space renormalization group method to probe the quench dynamics of higher-dimensional quantum impurity systems, and we devised a master equation approach that included the effects of a fully fluctuating environment. This way, we have addressed a very broad spectrum of transient phenomena in quantum impurity systems, with disorder ranging from the quenched to the annealed limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Imaging local luminescence variations in CdSe 0.1 Te 0.9 thin films grown by the colossal grain growth process

Clear visualization and understanding of luminescence properties of grain interiors and grain boundaries in polycrystalline thin-film photovoltaic materials are crucial to achieving high-performance solar cells. Luminescence-based measurements, for example, reveal sub-bandgap energetic disorder or impurity-related radiative transitions in these materials, and when performed in the absolute scale, they can show the extent of voltage-limiting non-radiative recombination. Here we use a hyperspectral imaging technique to investigate inter- and intra-grain photoluminescence variations in polycrystalline CdSe 0.1 Te 0.9 films made by the colossal grain growth process. We observe that grain boundaries show higher luminescence than grain interiors for all energies below the bandgap energy. Multiple distinct sub-bandgap defect transitions are detected and determined to be related to donor-acceptor pair impurities. A comparison of the excitation-intensity-dependent photoluminescence at the grain boundaries with grain interiors suggests that carrier concentration is higher at grain boundaries. This finding is supported by photoemission electron microscopy imaging of the films, showing approximately 70 meV upward energy shift in the band structure at the grain boundaries. Finally, we investigate a dramatic thermal quenching behavior related to the donor-acceptor pairs luminescence over a temperature range and use a rate-equation model to attribute it to the sudden redirection of the radiative recombination channels to non-radiative channels with increasing temperature.

14 SOLAR ENERGY↗
DOE OSTI2022

Computationally Accelerated Discovery of High Entropy Pyrochlore Oxides

High entropy ceramics provide enhanced flexibility for tailoring a wide range of physical properties, emerging from the diverse chemical and configurational degrees of freedom. Expanding upon the endeavors of recently synthesized high entropy ceramics in rock salt, fluorite, spinel, and perovskite structures, we explore the relative feasibility of formation of high entropy pyrochlore oxides, A 2 B 2 O 7 , with multication occupancy of the B-site, estimated from first-principles-based thermodynamic descriptors. Subsequently, we used Monte Carlo simulations to estimate the phase composition, oxygen vacancy concentration, and local ionic segregation as a function of temperature and oxygen partial pressure. In synergy with the theoretical calculations, we have investigated the synthesis of several multicomponent oxides with a pyrochlore composition, related to our computational investigations, resulting in four phase pure and one 97.4% pure high entropy pyrochlore oxides. Ultimately, our approach allows us to evaluate potential impurity phases, ionic disorder, and oxygen vacancy concentration in response to the experimental variables, thereby making realistic predictions that can direct and accelerate experimental synthesis of novel multicomponent ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electrical and Magnetic Properties of FeGa 3 with Antisite Disorder

We investigated the electronic and magnetic ground states of the cage compound FeGa 3 under the presence of Fe antisite disorder (namely as Fe 0.258 Ga 0.742 ) by x-ray diffraction (XRD), Mössbauer spectroscopy (MS), magnetization and electrical resistivity. Our results show that approximately 4.5 (5)% Fe antisite occupying one of the two non-equivalent Ga sites changes significantly the electronic and magnetic ground states of the pristine compound. We uncover that Fe 0.258 Ga 0.742 undergoes two magnetic transitions, T 1 ≈ 60 K and T 2 ≈ 15 K, the latter associated with the suppression of semiconducting behavior. We focus our discussion on the role that in-gap impurity states and spin disorder play across semiconducting-metal and paramagnetic-magnetic transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Magnetic functionalization and catalytic behavior of magnetic nanoparticles during laser photochemical graphitization of polyimide

We report laser-assisted photochemical graphitization of polyimides (PIs) into functional magnetic nanocomposites using laser irradiation of PI in the presence of magnetite nanoparticles (MNPs). PI Kapton sheets covered with MNP were photochemically treated under ambient conditions using a picosecond pulsed laser (1064 nm) to obtain an electrically conductive material. Scanning electron microscopy of the treated material revealed a layered magnetic nanoparticle/graphite (MNP/graphite) nanocomposite structure. Four probe conductivity measurements indicated that the nanocomposite has an electrical conductivity of 1550 ± 60 S/m. Superconducting quantum interference device magnetometer-based magnetic characterization of the treated material revealed an anisotropic ferromagnetic response in the MNP/graphite nanocomposite compared to the isotropic response of MNP. Raman spectroscopy of the MNP/graphite nanocomposite revealed a fourfold improvement in graphitization, suppression in disorder, and decreased nitrogenous impurities compared to the graphitic material obtained from laser treatment of just PI sheets. X-ray photoelectron spectroscopy, x-ray diffraction, and energy-dispersive x-ray spectroscopy were used to delineate the phase transformations of MNP during the formation of MNP/graphite nanocomposite. Post-mortem characterization indicates a possible photocatalytic effect of MNP during MNP/graphite nanocomposite formation. Under laser irradiation, MNP transformed from the initial Fe 3 O 4 phase to γ-Fe 2 O 3 and Fe 5 C 2 phases and acted as nucleation spots to catalyze the graphitization process of PI.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning the Intrinsic Anisotropy with Disorder in the Ca K Fe 4 As 4 Superconductor

In this paper, we report on the anisotropy of the London penetration depth of CaKFe 4 As 4 , discussing how it relates to its electronic structure and how it modifies under introduction of disorder, both chemically induced (by Ni substitution) and irradiation induced (by 3.5-MeV protons). Indeed, CaKFe 4 As 4 is particularly suitable for the study of fundamental superconducting properties due to its stoichiometric composition, exhibiting clean-limit behavior in the pristine samples and having a fairly high critical temperature, T c ≈35 K. The London penetration depth λ L is measured with a microwave-coplanar-resonator technique that allows us to deconvolve the anisotropic contributions λ L,ab and λ L,c and obtain the anisotropy parameter γλ=λ L,c /λ L,ab . The γλ(T) found for the undoped pristine sample is in good agreement with previous literature and is here compared to ab initio density-functional-theory and Eliashberg calculations. The dependence of γλ(T) on both chemical and irradiation-induced disorder is discussed to highlight which method is more suitable to decrease the direction dependence of the electromagnetic properties while maintaining a high critical temperature. Lastly, the relevance of an intrinsic anisotropy such as γλ on application-related anisotropic parameters (critical current, pinning) is discussed in light of the recent employment of CaKFe 4 As 4 in the production of wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Three Jahn-Teller States of Matter in Spin-Crossover System Mn(taa)

Three high-spin phases recently discovered in the spin-crossover system Mn(taa) are identified through analysis by a combination of first-principles calculations and Monte Carlo simulation as a low-temperature Jahn-Teller ordered (solid) phase, an intermediate-temperature dynamically correlated (liquid) phase, and an uncorrelated (gas) phase. In particular, the Jahn-Teller liquid phase arises from competition between mixing with low-spin impurities, which drive the disorder, and intermolecular strain interactions. Additionally, the latter are a key factor in both the spin-crossover phase transition and the magnetoelectric coupling. Jahn-Teller liquids may exist in other spin-crossover materials and materials that have multiple equivalent Jahn-Teller axes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Unconventional magnetotransport and antiferromagnetic order in Eu 2 ⁢InTe 5

Here, we report on the structural characterization and physical properties of Eu 2 ⁢InTe 5 , a distorted square-net motif antiferromagnetic semiconductor. Single crystal x-ray diffraction measurements reveal a distortion of the Te square-net layers such that an orthorhombic supercell is necessary to accurately describe the structure. Magnetization, resistivity, and specific heat measurements confirm antiferromagnetic ordering at 𝑇 𝑁 = 7.3K. Anisotropy in magnetization data suggests the magnetic moments are oriented parallel to the 𝑐 axis. We observe an unconventional transverse magnetoresistance and Hall resistivity in the paramagnetic state (𝑇 ≤ 80K), indicating strong coupling between localized Eu 2+ magnetic moments and conduction electrons. Resistivity and Hall measurements indicate the material is a heavily doped semiconductor, with impurity states related to disorder. Our findings highlight a relatively unexplored Eu-based antiferromagnetic semiconductor with unconventional magnetotransport behavior.

Cook, Matthew S. [Oak Ridge National Laboratory (O↗
DOE OSTI2025

Impurity-induced moment freezing in NaFe x⁢ Ru 1–x O 2

We report the impact of magnetic impurity substitution on the quantum disordered magnetic ground state of NaRuO 2 . Local S = 5/2 moments are introduced into the frustrated triangular lattice of J eff = 1/2 Ru moments via Fe substitution in NaFe x⁢ Ru 1–x O 2 , and the evolution of the magnetic ground state is reported. Local spin freezing associated with conventional spin-glass behavior is observed upon Fe substitution, marking an impurity-induced freezing of the primarily dynamic magnetic ground state in NaRuO 2 . Furthermore, local Fe moments induce a Curie-Weiss magnetic behavior in the uniform magnetic susceptibility, and the local moment magnitude is best described by dynamic Ru moments polarized about impurity sites. Furthermore, our results establish an impurity-doping phenomenology consistent with inherently dynamic moments in NaRuO 2 that are pinned by local magnetic impurities, similar to “swiss cheese” models of impurity-substituted copper oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding Heterogeneities in Quantum Materials

Quantum materials are usually heterogeneous, with structural defects, impurities, surfaces, edges, interfaces, and disorder. These heterogeneities are sometimes viewed as liabilities within conventional systems; however, their electronic and magnetic structures often define and affect the quantum phenomena such as coherence, interaction, entanglement, and topological effects in the host system. Therefore, a critical need is to understand the roles of heterogeneities in order to endow materials with new quantum functions for energy and quantum information science applications. In this article, several representative examples are reviewed on the recent progress in connecting the heterogeneities to the quantum behaviors of real materials. Specifically, three intertwined topic areas are assessed: i) Reveal the structural, electronic, magnetic, vibrational, and optical degrees of freedom of heterogeneities. ii) Understand the effect of heterogeneities on the behaviors of quantum states in host material systems. iii) Control heterogeneities for new quantum functions. This progress is achieved by establishing the atomistic-level structure-property relationships associated with heterogeneities in quantum materials. Finally, the understanding of the interactions between electronic, magnetic, photonic, and vibrational states of heterogeneities enables the design of new quantum materials, including topological matter and quantum light emitters based on heterogenous 2D materials.

36 MATERIALS SCIENCE↗