Search NASA⌕ Search

SEARCH · Search NASA

Results for “index reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Multiscale modeling and nonlinear model predictive control for flue gas desulfurization

The primary source of sulfur dioxide (SO 2 ) emissions is flue gas from fossil fuels-based power plants. SO 2 emissions are known to not only cause health issues, but also have an adverse effect on the environment in various ways. Several Flue Gas Desulfurization (FGD) technologies have been incorporated in power plants. The most popular technology is Wet FGD, where a limestone slurry is used to absorb SO 2 from the flue gas. A detailed droplet scale model describing the instantaneous and finite rate chemistry is developed. The ill-posed Differential-Algebraic Equation (DAE) droplet model is reformulated to a well-posed index-1 DAE through index reduction. The droplet model is integrated with the bulk phase by incorporating gas-liquid mass transfer, and an oxidation reactor model to simulate the dynamic operation of the counter-current spray scrubber. As a result, the model has a well-conditioned Jacobian and overcomes the modeling challenges of previous works and enables numerical solution without requiring carefully selected initialization or specialized solution procedures. The model is successfully validated using power plant measurements, and nonlinear model predictive control (NMPC) studies are demonstrated to optimize recycle stream flowrates to minimize pumping costs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Solving differential‐algebraic equations in power system dynamic analysis with quantum computing

Abstract Power system dynamics are generally modeled by high dimensional non‐linear differential‐algebraic equations (DAEs) given a large number of components forming the network. These DAEs' complexity can grow exponentially due to the increasing penetration of distributed energy resources, whereas their computation time becomes sensitive due to the increasing interconnection of the power grid with other energy systems. This paper demonstrates the use of quantum computing algorithms to solve DAEs for power system dynamic analysis. We leverage a symbolic programming framework to equivalently convert the power system's DAEs into ordinary differential equations (ODEs) using index reduction methods and then encode their data into qubits using amplitude encoding. The system non‐linearity is captured by Hamiltonian simulation with truncated Taylor expansion so that state variables can be updated by a quantum linear equation solver. Our results show that quantum computing can solve the power system's DAEs accurately with a computational complexity polynomial in the logarithm of the system dimension. We also illustrate the use of recent advanced tools in scientific machine learning for implementing complex computing concepts, that is, Taylor expansion, DAEs/ODEs transformation, and quantum computing solver with abstract representation for power engineering applications.

computational complexity↗
DOE OSTI2021

Integrated assessment model diagnostics: key indicators and model evolution

Integrated assessment models (IAMs) form a prime tool in informing climate mitigation strategies. Diagnostic indicators that allow to compare these models can help to describe and explain differences in model projections. This also increases transparency and comparability. Earlier, the IAM community has developed an approach to diagnose models (Kriegler et al., 2015). Here we build on this, by proposing a selected set of well-defined indicators as a community standard, similar to metrics used for other modeling communities such as climate models. These indicators are the relative abatement index (RAI), emission reduction type index (ERT), inertia timescale (IT), fossil fuel reduction (FFR), transformation index (TI) and cost per abatement value (CAV). We apply the approach to 17 IAMs, including both older version as well as their latest versions, as applied in the IPCC 6th Assessment Report (AR6). The study shows that the approach can be easily applied and allows for comparison of model versions in time. The indicators and their trends can often be explained in terms of model characteristics and changes. We show that together, the set of six indicators can provide an useful indication of the main traits of the model and can roughly indicate the general model behavior. The results also show that there is often a considerable spread across the models. Interestingly, the diagnostic values often change for different model versions, but there does not seem to be a distinct trend across the different models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Quantification of Swelling in Hematite Pellets Reduced Using Hydrogen–Nitrogen Gas Mixture

Iron ore pellets are reduced in a 50%H 2 –50%N 2 1 atm gas mixture at 750, 800, 850, 900, and 950 °C while simultaneously documenting swelling (change in pellet radius) and weight change. Swelling increases with increasing temperature, with catastrophic swelling (>20% of reduction swelling index) observed at 850, 900, and 950 °C. As the pellet is reduced, the pellet radius increases until 40–50% reduction is achieved, followed by a decrease in diameter beyond 40–50% reduction at 750 and 850 °C. At 950 °C, the pellet radius continues to increase with additional pellet reduction without any subsequent decrease in diameter. Scanning electron microscopy (SEM) analysis shows that the neighboring grains inside the pellet sinter together at 750 and 850 °C, whereas the individual grains sinter internally at 950 °C. SEM analysis and observations suggest that the reduction process at 750 and 850 °C can be approximated as a topochemical reaction process, while the reduction process at 950 °C can no longer be approximated as a topochemical reaction process. In conclusion, an empirical equation for the radius of the pellet is derived with fitting parameters dependent on temperature and the degree of reduction of the pellet undergoing reduction based on the experimental data.

08 HYDROGEN↗
DOE OSTI2026

Strong Sensitivity of Simulated Biomass Burning Aerosol Transport and Radiative Effects Over the South Atlantic to Carbonaceous Aerosol Aging and Particle Density

Biomass burning aerosol (BBA) impacts climate through aerosol‐cloud‐radiation interactions, but models disagree on the sign and magnitude of BBA radiative effects. We quantify the sensitivity of BBA radiative effects and transport to three BBA‐relevant processes and properties: parameterized oxidative aging of organic aerosol (OA), a combined change to black carbon (BC) density and the method for calculating aerosol refractive index, and reduction in OA density. We evaluate Unified Model simulations against two aircraft campaigns from summer 2017 over the Southeast Atlantic. The model generally performs well, such that discrepancies between the observational data sets may sometimes limit the precision of the evaluation. Our newly developed aging parameterization reproduces observed OA:BC mass ratios well and allows modeled OA:BC to decrease with smoke age, but increases bias in aerosol extinction and changes the BBA radiative effect little (+0.12 W m -2 ). We calculate aerosol refractive index using either a volume‐weighted component average or the Maxwell‐Garnett (MG) mixing assumption, which represents BC as small inclusions in a host material. Compared to MG mixing, the volume‐weighted average refractive index and reduced BC density increase aerosol absorption, substantially increasing the total BBA radiative effect (+2.66 W m -2 ) and amount of BBA transported across the ocean through BC self‐lofting. Reducing OA density to better match literature values changes the total BBA radiative effect by −1.96 W m -2 . Changes to direct radiative effects exceed changes to cloud radiative effects. Our findings emphasize the sensitivity of aerosol radiative effects and transport to these processes and properties, which we suggest could be improved in climate models.

Southeast Atlantic↗
DOE OSTI2025

Regime Characterization of Offshore Wind Resource Using Unsupervised Learning

Predictability of wind resource conditions is critical for offshore wind design and operations. While many studies of extreme wind conditions focus on specific events such as low-level jets or ramps, these rely on threshold definitions that limit generality. Here we present a data-driven framework that combines principal component analysis (PCA), self-organizing maps (SOM), and k-means clustering to classify wind resource conditions as typical and anomalous from climatological data. Anomalies are defined not by fixed thresholds but by flagging samples located far from SOM node centers inside the baseline SOM structure. This reframes extremes as rare ebents and hence, likely difficult to anticipate by numerical weather prediction models. We applied this approach to 23 years (2000–2022) of hourly profiles from the NOW-23 hindcast model at the Humboldt Wind Energy Area. Classification is conducted on a feature space consisting of 10 m wind speed and direction, bulk shear and veer across 30–270 m, and a low-level jet index. Dimensionality reduction is achieved through PC. A 2 × 3 OM lattice trained on the PCA vectors identified six baseline regimes spanning weak to strong flow states. High quantization-error profiles are identified and re-clustered into four anomalous regimes. The baseline regimes exhibited clear seasonal and diurnal cycles. Meanwhile, the anomalous regimes represented <10 % of all hours but showed distinct combinations of speed, shear, and veer, when compared to the baseline regimes. Anomalous regimes are typically short-lived (~few hours), yet their transitions can lead to hub-height wind changes of −18 to +9 m s -1 . For a representative 15 MW turbine, these shifts imply rapid swings in capacity factor from near-full output to negligible generation. Validation with lidar buoy data showed 51% agreement in SOM labels across ~6,000 overlapping hours, with most mismatches confined to adjacent speed classes. HRRR comparisons further revealed that anomalous regimes were disproportionately associated with forecast biases exceeding 5 m s -1 . Together, these results reframe extremes in offshore wind from absolute maxima or minima to weather states that are difficult to anticipate from models.

17 WIND ENERGY↗
DOE OSTI2024

Light Duty Engine Performance Characteristics with Dimethyl Ether and Propane

Here, this paper explores the performance characteristics of a compression ignition HYUNDAI 2.2L engine operating with Dimethyl Ether (DME). Test are carried out at three operating conditions that weigh heavily in the FTP75 certification cycle (1000rpm-12Nm, 1500rpm-50Nm, 2000rpm-100Nm). The engine features a high-pressure common rail fuel injection system designed to operate with liquified gases. The main component of the fuel system is a high-pressure pump that incorporates an electronic inlet metering valve commanded on a crank-angle base to control the rail pressure. The pump, which requires no pressure regulator, provides the flow needed to the injectors without flow returning to the inlet. This novel fueling system is leveraged in tests that are conducted to examine the impact of EGR, combustion phasing, injection pressure on efficiency and emissions. In addition, the impact of introducing 15% Propane by mass is examined. During the tests, the engine ECU is aided by an Engine Controller High Speed Oversight unit (ECHO) to provide combustion phasing control, improved cylinder-to-cylinder uniformity, and an effective optimization over the testing effort. The use of DME and Propane allowed for peak thermal efficiency of nearly 43%. These fuels enable significant carbon index (CI) reductions over the baseline Diesel fuel, with indications that 50% reduction in CO 2 over the Diesel engine are possible.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Implications of Changes in Water Stress and Precipitation Extremes for Cocoa Production in Côte D'ivoire and Ghana

ABSTRACT Climate change induces high variability in drought patterns and extreme precipitation indices in rainfed cocoa farming, impacting cocoa production. This study evaluated water stress, meteorological and agricultural drought conditions, and critical extreme precipitation indices in the world's two largest cocoa‐producing nations from 1981 to 2022. The results revealed a significant reduction in total annual precipitation (PRCPTOT), in the last three decades, with the greatest decline in the 1991–2000 and 2011–2022 periods. Ghana experienced the most significant reduction up to 15% (200 mm/year) in the last decade, attributed to a substantial decrease in wet days number (RR1) up to 25 days per year, a reduction in maximum consecutive wet days (CWD) up to 6 days per year, and an increase in maximum consecutive dry days (CDD) up to 15 days per year. Moreover, there was a notable decline in the Simple Daily Intensity Index (SDII), with reductions of up to 4 mm/day in certain areas, contributing to increased drought frequency, severity, and duration. In the most recent decade (2011–2022), particularly during the extremely dry years of 2013 and 2015, cocoa‐growing regions in Ghana (GHA) and eastern Côte d'Ivoire (CIV) experienced prolonged agricultural drought expressed by soil moisture deficit, typically extending from May to September. Additionally, large portions of central and eastern Ghana, as well as northeastern Côte d'Ivoire experienced sustained water stress, with over three consecutive months of total monthly precipitation falling below 100 mm, negatively impacting cocoa productivity. The decrease in the yield in the range of 2.5% to 37% was noted in the dry years and the following years, varying according to the country depending on the severity of the drought. Sensitivity analysis highlights cocoa yield's responsiveness to drought and water stress, particularly in specific years when water stress occurred, such as 1984,1985, 1989, 1995, 1999, 2000, and 2008. Considering the observed trends in precipitation patterns and their impact on cocoa production, it is crucial to acknowledge the inherent uncertainty of future precipitation patterns due to climate change. To address this challenge effectively, our study underscores the importance of identifying and closely monitoring regions currently facing water stress, as determined by precipitation and drought indicators. Over the analysed period (1981–2022), we have noted shifts in the distribution of water‐stressed areas, highlighting the dynamic nature of this issue. Consequently, we advocate for a targeted approach to implement cocoa supplementary irrigation in consistently water‐stressed regions.

Obahoundje, Salomon [International Water Managemen↗
DOE OSTI2024

A Growing Braking Index and Spin-down Swings for the Pulsar PSR B0540–69

The way pulsars spin down is not understood in detail, but a number of possible physical mechanisms produce a spin-down rate that scales as a power of the rotation rate ($\dot{v}$ α-$v$ n ), with the power-law index n called the braking index. PSR B0540−69 is a pulsar that in 2011, after 16 yr of spinning down with a constant braking index of 2.1, experienced a giant spin-down change and a reduction of its braking index to nearly zero. Here, we show that, following this episode, the braking index monotonically increased during a period of at least 4 yr and stabilized at ∼1.1. We also present an alternative interpretation of a more modest rotational irregularity that occurred in 2023, which was modeled as an anomalous negative step of the rotation rate. Our analysis shows that the 2023 observations can be equally well described as a transient swing of the spin-down rate (lasting ∼65 days), and the Bayesian evidence indicates that this model is strongly preferred.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Alternative Vector PWM for CSI Common-Mode Voltage Reduction During Voltage-Boost Operation with Low Modulation Index

This paper proposes a new pulse-width modulation (PWM) scheme named alternative vector PWM (AVM) algorithm that reduces the common-mode voltage (vCM) generated by a 3-phase current source inverter (CSI) during operation within a portion of its voltage-boost regime when the CSI’s modulation index is below 1/3–√(=0.5774). Three different active current vector pairs (one conventional pair with adjacent active current vectors and two proposed pairs with non-adjacent active current vectors) are used to reduce vCM based on the CSI’s output voltage conditions. Experimental results confirm significant reductions in major vCM spectral components by up to approx. 85% between the 3rd harmonic of the fundamental frequency and the CSI’s PWM frequency, validating the advantages of the proposed AVM algorithm over the conventional PWM.

42 ENGINEERING↗
DOE OSTI2021

Warm Phase of AMV Damps ENSO Through Weakened Thermocline Feedback

Abstract Interactions between ocean basins affect El Niño–Southern Oscillation (ENSO), altering its impacts on society. Here, we explore the effect of Atlantic Multidecadal Variability (AMV) on ENSO behavior using idealized experiments performed with the NCAR‐CESM1 model. Comparing warm (AMV+) to cold (AMV−) AMV conditions, we find that ENSO sea surface temperature (SST) anomalies are reduced by ∼10% and ENSO precipitation anomalies are shifted to the west during El Niño and east during La Niña. Using the Bjerknes stability index, we attribute the reduction in ENSO variability to a weakened thermocline feedback in boreal autumn. In AMV+, the Walker circulation and trade winds strengthen over the tropical Pacific, increasing the background zonal SST gradient. The background changes shift ENSO anomalies westwards, with wind stress anomalies more confined to the west. We suggest the changes in ENSO‐wind stress decrease the strength of the thermocline feedback in the east, eventually reducing ENSO growth rate.

Trascasa‐Castro, Paloma↗
DOE OSTI2025

Observations and modeling reveal that heatwaves reduce photosynthesis, plant carbon reserves, and net carbon uptake

Heatwaves threaten ecosystem carbon balances, yet the mechanisms driving short-term carbon flux responses remain poorly understood. Here, integrating high-frequency eddy covariance (EC) data from 140 global flux tower sites (872 site-years) with detailed process-based modeling, we examine ecosystem responses during and immediately after heatwaves. We show that heatwaves caused a −40% (range [−29%, −128%]) reduction in net ecosystem productivity (NEP) compared to pre-heatwave values, with this reduction persisting over the following two weeks (−38% range [+3%, −154%]). We attributed NEP decreases to photosynthesis decreases more than to ecosystem respiration (RE) increases. Forest sites had greater NEP decreases during heatwaves than non-forest sites, but remained carbon sinks afterwards, indicating resilience. Our modeling analysis of extreme heatwaves at selected EC sites shows that decreased photosynthesis, increased maintenance respiration, and decreased plant non-structural carbon reserves during heatwaves drive carbon cycle changes that persist for weeks. Consistent with phenocam observations, we modeled a reduction in leaf area index caused by reduced non-structural carbon reserves, leading to early leaf senescence and longer-term impacts. Ongoing increases in heatwaves are therefore likely to reduce NEP across a range of ecosystems, exacerbating carbon cycle feedback.

carbon cycle↗
DOE OSTI2022

An experimental approach for crown to whole-canopy defoliation in forests

Canopy defoliation is an important source of disturbance in forest ecosystems that has rarely been represented in large-scale manipulation experiments. Scalable crown to canopy level experimental defoliation is needed to disentangle the effects of variable intensity, timing, and frequency on forest structure, function, and mortality. We present a novel pressure-washing-based defoliation method that can be implemented at the canopy-scale, throughout the canopy volume, targeted to individual leaves or trees, and completed within a timeframe of hours or days. Pressure washing proved successful at producing consistent leaf-level and whole-canopy defoliation, with 10%–20% reduction in leaf area index and consistent leaf surface area removal across branches and species. This method allows for stand-scale experimentation on defoliation disturbance in forested ecosystems and has the potential for broad application. Studies utilizing this standardized method could promote mechanistic understanding of defoliation effects on ecosystem structure and function and development of synthetic understanding across forest types, ecoregions, and defoliation sources.

Forestry↗
DOE OSTI2025

Electrosynthesis of high purity ethylene using high-index facet Cu 2 O nanocrystals electrocatalyst

Electrochemical CO 2 reduction reaction (eCO2RR) to multi-carbon (C 2+ ) products with copper-based catalysts is often limited by poor selectivity. This challenge arises from the concurrent formation of various intermediates, dictated by the atomic arrangement and electronic properties of surface atoms. In this study, we found that copper (I) oxide (Cu 2 O) nanocrystals with 50 facets (50F-NC), predominantly featuring (211) facets that offers high density of under-coordinated sites, demonstrate superior ethylene (C 2 H 4 ) selectivity of 92% ± 2 with an overall current density of 212 mA/cm 2 at -650 mV vs RHE. Furthermore, after one month of storage in a 1 M KOH electrolyte, this catalyst demonstrated a C 2 H 4 Faradaic efficiency of 87% highlighting its stabile structure under strong alkaline environments. Here, operando electrochemical Raman spectroscopy revealed enhanced CO* intermediate coverage on the 50F-NC catalyst, correlating with improved C-C coupling. SEM, TEM, and XPS analyses, along with DFT calculations, suggested that Cu sites on the (211) facet of 50F-NC and those at the Cu/Cu 2 O interface formed in-situ due to the surface reconstruction during the reaction, are likely active sites for effective C-C coupling and sustained high-rate C 2 H 4 production.

Cu nano particle↗
DOE OSTI2022

Seven days of ischemic preconditioning augments hypoxic exercise ventilation and muscle oxygenation in recreationally trained males

This investigation sought to assess whether single or repeated bouts of ischemic preconditioning (IPC) could improve oxyhemoglobin saturation ([Formula: see text]) and/or attenuate reductions in muscle tissue saturation index (TSI) during submaximal hypoxic exercise. Fifteen healthy young men completed submaximal graded exercise under four experimental conditions: 1) normoxia (NORM), 2) hypoxia (HYP) [oxygen fraction of inspired air ([Formula: see text]) = 0.14, ∼3,200 m], 3) hypoxia preceded by a single session of IPC (IPC1-HYP), and 4) hypoxia preceded by seven sessions of IPC, one a day for 7 consecutive days (IPC7-HYP). IPC7-HYP heightened minute ventilation (V̇e) at 80% HYP peak cycling power output ( W peak ) (+10.47 ± 3.35 L·min −1 , P = 0.006), compared with HYP, as a function of increased breathing frequency. Both IPC1-HYP (+0.17 ± 0.04 L·min −1 , P < 0.001) and IPC7-HYP (+0.16 ± 0.04 L·min −1 , P < 0.001) elicited greater oxygen consumption (V̇o 2 ) across exercise intensities compared with NORM, whereas V̇o 2 was unchanged with HYP alone. [Formula: see text] was unchanged by either IPC condition at any exercise intensity, yet the reduction of muscle TSI during resting hypoxic exposure was attenuated by IPC7-HYP (+9.9 ± 3.6%, P = 0.040) compared with HYP, likely as a function of reduced local oxygen extraction. Considering all exercise intensities, IPC7-HYP attenuated reductions of TSI with HYP (+6.4 ± 1.8%, P = 0.001). Seven days of IPC heightens ventilation, posing a threat to ventilatory efficiency, during high-intensity submaximal hypoxic exercise and attenuates reductions in hypoxic resting and exercise muscle oxygenation in healthy young men. A single session of IPC may be capable of modulating hypoxic ventilation; however, our present population was unable to demonstrate this with certainty.

Physiology↗
DOE OSTI2023

Effects of forest structural and compositional change on forest microclimates across a gradient of disturbance severity

Forest structural diversity and community composition are key in regulating forest microclimates. When disturbance affects structural diversity or composition, forest microclimates may be altered due to changes in soil temperature, soil water content, and light availability. It is unclear however which structural or compositional components, when changed or to what extent, result in microclimatic change. To address this question, we used data from a large scale, manipulative stem-girdling experiment in northern, lower Michigan—the Forest Resilience and Threshold Experiment (FoRTE). FoRTE follows a factorial design with multiple levels of disturbance severity (0, 45, 65, 85%) based on targeted reductions in gross leaf area index via stem-girdling induced mortality. These disturbance severity treatments are applied in two ways: either as top-down (largest trees are killed) or bottom-up (small to medium trees killed) treatments. We examined how multiple components of structural diversity and community composition changed as a product of disturbance severity and type, and then tested for resulting effects on forest microclimates (light availability, soil temperature, and soil water), using a multivariate, Random Forest framework. We found that measures of community composition (species richness, species evenness, and Shannon-Wiener Diversity Index) and stand structure (basal area, standard deviation of DBH, tree size diversity) declined more following disturbance than did measures of canopy cover, heterogeneity, arrangement, or height. However, when changes in each variable from pre- to post-disturbance, measured as log change, were employed in a multivariate, Random Forest regression framework, structural diversity measures of heterogeneity (rugosity, top rugosity), cover (canopy cover), and arrangement (porosity) were the most influential variables, but with differences among bottom-up and top-down treatments We found that the death of large trees from disturbance impacts soil temperature, water, and light environments more substantially and uniformly across disturbance gradients than does the death of smaller trees. Furthermore, our results have implications for both statistical and process-based modeling of forest disturbance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Allocating Reserves in Active Distribution Systems for Tertiary Frequency Regulation

This paper proposes a cooperative game theory-based approach for reserve optimization to enable distributed energy resources (DERs) participate in tertiary frequency regulation. Tertiary frequency regulation schemes ensure that reserve requirements of primary and secondary frequency regulation are fulfilled with a minimum cost. While the available reserve from a single distribution system may not suffice tertiary frequency regulation, stacked reserve from several distribution systems can enable them participate in tertiary frequency regulation at scale. In this paper, a two-stage strategy is proposed to effectively and precisely allocate spinning reserve requirement from each DER in distribution systems. In the first stage, two types of characteristic functions are computed: worthiness index (WI) and power loss reduction (PLR). In the second stage, the equivalent Shapley values are computed based on the characteristic functions, which are used to determine distribution factors for reserve allocation among DERs. The effectiveness of the proposed method for allocating reserves among DERs is demonstrated through several case studies on modified versions of the IEEE 13-node and 33-node distribution systems.

Gautam, Mukesh↗
DOE OSTI2023

The Sustainability Index: a new tool to breed for reduced greenhouse-gas emissions intensity in Australian dairy cattle

Context The Australian dairy industry has a target to reduce greenhouse-gas (GHG) emissions intensity by 30% between 2015 and 2030. At the animal level, apart from nutritional modifications and other management practices, selecting animals that emit less GHG can be a cost-effective and long-term strategy. Given the world’s demand for protein is increasing, selecting for animals with lower GHG emissions per unit of production, i.e. emissions intensity, is a realistic approach that addresses the key issue of emissions reduction while maintaining farm productivity. Aim To develop a selection index for Australian dairy cattle to breed for reduced emissions intensity. Methods The Sustainability Index was built based on the existing Balanced Performance Index (BPI) but placed greater emphasis on production, survival, health and feed efficiency. Key results In August 2022, DataGene released the Sustainability Index that can be used by dairy farmers to select animals with lower environmental footprints. Compared with BPI, the weights for protein, fat, survival, mastitis resistance and feed efficiency increased by 2.6-, 1.4-, 2.8-, 1.3- and 3.8-fold respectively. It is expected that with the use of the Sustainability Index, emissions intensity will be reduced by 7.64%, 8.96% and 5.52% respectively in Holstein, Jersey and Red breeds by 2050, compared with the 2015 level. The corresponding values when selecting for BPI were 6.34%, 7.91% and 5.23% respectively. However, the trade-off in BPI when using the Sustainability Index will be AUD0.79, AUD0.83, AUD0.22 per cow per year for Holstein, Jersey and Red breeds respectively. Conclusions The current profit index BPI has contributed to reduction in emissions intensity. To enhance the rate of improvement in emissions intensity, the Sustainability Index can be used with minimal impacts on profit. Implications To breed for lower emissions intensity, farmers can select animals with high Sustainability Index values that are published on DataVat (datavat.com.au) and the Good Bulls App. To lower gross emissions, combinations of additional measures such as management of diet, adjustment to animal numbers, management of stored manure, and appropriate use of carbon neutral fertiliser, renewable fuels and energy, will need to be adopted on farms.

Agriculture↗