Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion concentration polarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Current–Induced Ion Concentration Polarization at a Perfect Ion–Exchange Patch in an Infinite Insulating Wall

This research examines theoretically the ion concentration polarization, ion fluxes, and electrostatic fields near an ion exchange patch in the wall of an electrified fluidic channel. These phenomena are important in related microfluidic ion-preconcentration systems. Under an electric field, counterions enter the ion-exchange patch at one side and leave at the other, with salt depletion occurring near the entrance and accumulation near the exit. Furthermore, the high patch conductivity and the concentration profiles lead to local electric field perturbations that may facilitate preconcentration. This study includes analytical expressions of ion concentrations and electrochemical potentials at small to moderate electric fields, as well as numerical simulations. Additionally, a simple matrix of polynomial coefficients (obtained via fitting of numerical data) enables analytical calculation of the 2-dimensional concentration profiles at all electric fields within the range investigated in the numerical simulations. This is possible because a single dimensionless parameter controls this problem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Salt Removal by Unipolar Ion Conduction in Ion Concentration Polarization Desalination

Chloride ion, the majority salt in nature, is ~52% faster than sodium ion (D Na+ = 1.33, D Cl- = 2.03[10 -9 m 2 s -1 ]). Yet, current electrochemical desalination technologies (e.g. electrodialysis) rely on bipolar ion conduction, removing one pair of the cation and the anion simultaneously. Here, we demonstrate that novel ion concentration polarization desalination can enhance salt removal under a given current by implementing unipolar ion conduction: conducting only cations (or anions) with the unipolar ion exchange membrane stack. Combining theoretical analysis, experiment, and numerical modeling, we elucidate that this enhanced salt removal can shift current utilization (ratio between desalted ions and ions conducted through electrodes) and corresponding energy efficiency by the factor ~(D - –D + )/(D - + D + ). Specifically for desalting NaCl, this enhancement of unipolar cation conduction saves power consumption by ~50% in overlimiting regime, compared with conventional electrodialysis. Recognizing and utilizing differences between unipolar and bipolar ion conductions have significant implications not only on electromembrane desalination, but also energy harvesting applications (e.g. reverse electrodialysis).

42 ENGINEERING↗

Ion concentration polarization causes a nearly pore-length-independent conductance of nanopores

There has been a great amount of interest in nanopores as the basis for sensors and templates for preparation of biomimetic channels as well as model systems to understand transport properties at the nanoscale. The presence of surface charges on the pore walls has been shown to induce ion selectivity as well as enhance ionic conductance compared to uncharged pores. Here, using three-dimensional continuum modeling, we examine the role of the length of charged nanopores as well as applied voltage for controlling ion selectivity and ionic conductance of single nanopores and small nanopore arrays. First, we present conditions where the ion current and ion selectivity of nanopores with homogeneous surface charges remain unchanged, even if the pore length decreases by a factor of 6. This length-independent conductance is explained through the effect of ion concentration polarization (ICP), which modifies local ionic concentrations, not only at the pore entrances but also in the pore in a voltage-dependent manner. We describe how voltage controls the ion selectivity of nanopores with different lengths and present the conditions when charged nanopores conduct less current than uncharged pores of the same geometrical characteristics. The manuscript provides different measures of the extent of the depletion zone induced by ICP in single pores and nanopore arrays, including systems with ionic diodes. In conclusion, the modeling shown here will help design selective nanopores for a variety of applications where single nanopores and nanopore arrays are used.

Cain, DaVante↗

Purification of ultra-high saline and contaminated water by multi-stage ion concentration polarization (ICP) desalination

A water stream is passed between two juxtaposed similar ion exchange membranes (AEMs or CEMs), forming an ion depletion and ion enrichment zones when an electric field is applied. As cations are selectively transferred through the CEMs, for example, anions are relocated in order to achieve electro-neutrality, resulting in the concentration drop (increase) in ion depletion (enrichment) zone. Trifurcation of the output channel allows collection of concentrated, dilute and intermediate streams, with the intermediate stream serving as input to the next stage of a serialized implementation.

Kim, Bumjoo↗

Operando FTIR investigation of salt dynamics in Li-ion batteries during fast charging

Li-ion batteries, when charged at fast-charging rates ($>$2C), suffer from reduced lifetimes and can undergo catastrophic failure. During high-rate charging, Li-ions are unable to rapidly transport through high-loading electrodes ($>$4 mAh cm −2 ). This results in unequal charge distributions, potentials, and utilization of the active material, which can lead to Li plating. Li-ion concentration polarization, in which Li-ions deplete in the anode and accumulate in the cathode during charging, precedes Li plating. An operando FTIR-ATR graphite/NMC cell developed in this research captured Li-ion concentration polarization in real-time. During fast charging, decreases in Li-ion concentration ($>$95%) were measured at the back of the anode. This is the first verification of complete Li-ion depletion within the anode at high C-rates. The measurements also showed graphite stage transition. A P2D model was developed for comparison to the operando measurements. The measurements agreed with the model in some cases, but disparities existed at high C-rates and loadings. In the experiment, the Li-ion concentration often failed to recover to 1.2 M until several hours after charging, whereas the model Li-ion concentration rapidly recovered. The contrast between the model and experiment results indicates that further investigation is required to improve understanding of Li-ion concentration dynamics during fast charging.

25 - ENERGY STORAGE↗

Ion concentration polarization-electrocoagulation hybrid water treatment system

Between two juxtaposed similar ion exchange membranes (AEMs or CEMs), an ion depletion zone and ion enrichment zone are generated under an electric field. As cations are selectively transferred through the CEMs, for example, anions are relocated in order to achieve electro-neutrality, resulting in the concentration drop (increase) in ion depletion (enrichment) zone. The use of a sacrificial metal anode allows electrocoagulation (EC) concurrently with ICP thereby permitting concentration of both ionic and non-ionic impurities to occur at the same time within the same cell or device.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electro-osmo-dialysis through nanoporous layers physically conjugated to micro-perforated ion-exchange membranes: Highly selective accumulation of trace coions

This study explores theoretically and numerically the phenomenon of counter-flow accumulation of trace coions during electro-osmo-dialysis through composite membranes containing nanoporous and perforated ion-exchange layers. The combination of charged nanopores and perforations allows electroosmosis, and ion concentration polarization appears near the ion-exchange layer. Accumulation of trace coions occurs because their advective and electromigration flow velocity components have opposite signs and are locally compensating in depletion regions where electric fields are high. This local compensation of flow components can give rise to high accumulation factors (>1000 in some cases) for trace coions at some distance from the interface between the nanoporous and ion-exchange layers. Moreover, the extent of this accumulation depends on the trace-coion diffusion coefficient. The resulting selectivity between different coions might serve as a basis for environmentally friendly separation of ionic species such as synthetic peptides or rare-earth elements. For example, a periodic process might include accumulation followed by species release into smaller volumes of solution. For both rare-earth ions and peptide-like species, the accumulation selectivity between ions with small differences in mobilities depends on system parameters such as nanoporous-layer thickness, distance between the perforations, and the zeta potential of the nanopore surface. Here, the use of optimal values of these membrane parameters may enable tuning of the electro-osmo-dialysis system for separation of specific ions. Modelling reveals that despite inhomogeneous patterns of fluid and ion flows close to the nanoporous/perforated ion-exchange interface, at relatively short distances from this interface (less than half the distance between the perforations) all the flows become practically one-dimensional (1D). Similarly, the concentration profiles of trace coions also become 1D. The flow one-dimensionality at short distances from the current-polarized interface enables a simple 1D approximation that is useful for an approximate analysis of trends in this multi-parameter system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrokinetic Phenomena Enhanced Lithium-Ion Transport in Leaky Film for Stable Lithium Metal Anodes

The application of lithium (Li) metal anodes in Li metal batteries has been hindered by growth of Li dendrite which leads to short cycling life. Here a Li-ion-affinity leaky film as a protection layer is reported to promote a dendrite-free Li metal anode. The leaky film induces electrokinetic phenomena to enhance Li-ion transport, leading to a reduced Li-ion concentration polarization and homogenous Li-ion distribution. As a result, the dendrite-free Li metal anode during Li plating/stripping is demonstrated even at an extremely high deposition capacity (6 mA h cm -2 ) and current density (40 mA cm -2 ) with improved Coulombic efficiencies. A full-cell battery with the leaky-film protected Li metal as anode and high-areal-capacity LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM-811) (~4.2 mA h cm -2 ) or LiFePO 4 (~3.8 mA h cm -2 ) as cathode shows improved cycling stability and capacity retention, even at lean electrolyte conditions.

25 ENERGY STORAGE↗

Light ion concentrations and fluxes in the polar regions during magnetically quiet times

Ion concentrations, flow velocities, and fluxes, measured by the ion mass spectrometer on the Isis 2 satellite for periods around the solstices and equinoxes of 1971 and 1972, have been used in a study of the polar wind morphology during magnetically quiet times. The results confirm the major tenets of polar wind theories; namely, that an upward flow of both H(+) and He(+) ions exists at all times over the entire polar region; H(+) fluxes are of the order of 10 to the 8th ions/sq cm s in both summer and winter polar regions. O(+) is the dominant ion specie at 1400-km altitude in regions of strong H(+) flows, and H(+) is depleted over the entire region where the polar wind flows. H(+) fluxes tend to be lower in winter than in summer, whereas He(+) fluxes are a factor of 10 higher in winter and tend to follow the neutral helium concentration near the F2 maximum. The latter agree well with model calculations of flux in the winter but lie above the model values by a factor of 2 in the summer. H(+) fluxes also agree well with ion flow models.

Hoffman, J. H.↗

Cation-Specific Electrokinetic Separations Using Prussian Blue Intercalation Reactions

In this work, we report a new approach for forming ion depletion zones (IDZs) using intercalation reactions at an electrochemically controlled Prussian blue (PB) film. The experiments described here were performed using a microfluidic device, wherein a charged fluorophore in solution was used as a proxy to monitor IDZ formation. In the presence of K + , intercalation reactions proceed readily to form an IDZ, and thus enrich the fluorophore up to 37-fold. In the presence of the larger hydrated Li + or tetrabutylammonium (TBA + ) ions, however, ion intercalation proceeded less quickly than with K + . Slower ion intercalation resulted in a weaker IDZ and correspondingly lower enrichment factors of eight- and six-fold, respectively. These results are significant because they show that PB intercalation reactions selectively form an IDZ. Accordingly, we anticipate that these findings will lead to a better understanding and further interesting applications of intercalation materials like PB for efficient and selective enrichment and separations.

99 GENERAL AND MISCELLANEOUS↗

Concentration-Polarization-Induced Precipitation and Ionic Current Oscillations with Tunable Frequency

At the nanoscale, charges present at the surfaces of liquid–solid interfaces greatly influence the properties of ions and molecules present in the solution, and can lead to nanoscale effects such as ion selectivity, ion current rectification, and modulation of local ionic concentrations. Concentration polarization is another nanoscale phenomenon whereby ion concentrations are enriched at one opening of an ion-selective nanopore and depleted at the other. We demonstrate that when a nanopore is in contact with a weakly soluble salt present at a concentration below its solubility product, concentration polarization can lead to locally enhanced ionic concentrations and precipitation of the salt. Formed precipitates partially or fully occlude the nanopore’s opening as indicated by a measured transient decrease of the nanopore’s conductance. We have confirmed experimental conditions at which the locally created precipitate is either pushed through or dissolved, clearing the pore entrance and allowing the precipitation reaction to occur again. The dynamic process of precipitate formation and dissolution is observed as ion current fluctuations and oscillations with frequencies reaching 200 Hz. The frequency of the system operation exceeds other nanopore-based oscillators by 2 orders of magnitude, which we believe stems from the 30 nm length of the pores examined here, versus ~10 μm long pores reported before.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Medium controlled aggregative growth as a key step in mesoporous silica nanoparticle formation

Near monodisperse mesoporous silica nanoparticles (MSN) represent a promising and rapidly developing type of mesoporous silica materials; however, the vast data on their synthesis remains unorganized and ill-understood. We systematically studied the formation of MSN under basic and neutral conditions using various temperatures, CTAB concentrations, hydrolyzing agents (triethanolamine, ammonia, phosphate buffers), and media with different colloidal stabilization properties (with ethanol as a cosolvent and monovalent salts). In the typical conditions for the preparation of stable MSN colloids, the particle size was controlled by colloidal stabilization by the medium (solvent type, ionic strength, and surfactant concentration) in agreement with the “aggregative growth” mechanism, rather than by solely the hydrolysis and condensation rates conventionally used for data interpretation in the classical nucleation theory. Medium properties (pH, ion types and concentration, polarity) also defined the efficiency of silica-surfactant cooperative self-assembly, which directly affected the porosity, mesopore size and pore wall thickness. Interestingly, this traditional silica-surfactant route showed a limited effect on the particle size, emphasizing the dominating role of colloidal stabilization in the studied reaction conditions. In situ pH measurements showed that every reaction medium has unique pH evolution profiles depending on the buffer capacity, hydrolysis and condensation rates. Reaction systems that fail to maintain the working pH can lead to non-porous products or undesired particle morphology and size distribution. The established particle formation mechanism allowed us to formulate comprehensive guidelines for preparing relatively concentrated colloids of near monodisperse (PDI 5–15%) mesoporous 30–700 nm silica spheres with variable porosity and mesopore size. Here, these findings will be particularly useful in designing new mesoporous silica-containing materials for biomedical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a compact electron ion coincidence analyzer using a coaxially symmetric mirror electron energy analyzer and a miniature polar-angle-resolved time-of-flight ion mass spectrometer with four concentric anodes

A compact electron ion coincidence (EICO) analyzer that uses a coaxially symmetric mirror electron energy analyzer and a miniature polar-angle-resolved time-of-flight ion mass spectrometer with four concentric anodes was developed for surface science and surface analysis. The apparatus is especially useful in the study of ion desorption stimulated by an Auger process because information on the mass, yield, desorption polar angle, and kinetic energy of ions can be obtained for the selected core-ionization-final-states or the selected Auger-final-states. The analyzer can be used also for analysis of the configuration of specific surface molecules because the desorption polar angles reflect the direction of surface bonds. The EICO analyzer was evaluated by measuring polar-angle-resolved-ion yield spectra and coincidence spectra of Auger-electron and polar-angle-resolved H{sup +} from condensed water.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Estimation of Heavy Ion Densities From Linearly Polarized EMIC Waves At Earth

Linearly polarized EMIC waves are expected to concentrate at the location where their wave frequency satisfies the ion-ion hybrid (IIH) resonance condition as the result of a mode conversion process. In this letter, we evaluate absorption coefficients at the IIH resonance in the Earth geosynchronous orbit for variable concentrations of helium and azimuthal and field-aligned wave numbers in dipole magnetic field. Although wave absorption occurs for a wide range of heavy ion concentration, it only occurs for a limited range of azimuthal and field-aligned wave numbers such that the IIH resonance frequency is close to, but not exactly the same as the crossover frequency. Our results suggest that, at L = 6.6, linearly polarized EMIC waves can be generated via mode conversion from the compressional waves near the crossover frequency. Consequently, the heavy ion concentration ratio can be estimated from observations of externally generated EMIC waves that have polarization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Norbornene-Based Polymer Electrolytes for Lithium Cells

Norbornene-based polymers have shown promise as solid electrolytes for lithium-based rechargeable electrochemical cells. These polymers are characterized as single-ion conductors. Single-ion-conducting polymers that can be used in lithium cells have long been sought. Single-ion conductors are preferred to multiple-ion conductors as solid electrolytes because concentration gradients associated with multiple-ion conduction lead to concentration polarization. By minimizing concentration polarization, one can enhance charge and discharge rates. Norbornene sulfonic acid esters have been synthesized by a ring-opening metathesis polymerization technique, using ruthenium-based catalysts. The resulting polymer structures (see figure) include sulfonate ionomers attached to the backbones of the polymer molecules. These molecules are single-ion conductors in that they conduct mobile Li+ ions only; the SO3 anions in these polymers, being tethered to the backbones, do not contribute to ionic conduction. This molecular system is especially attractive in that it is highly amenable to modification through functionalization of the backbone or copolymerization with various monomers. Polymers of this type have been blended with poly(ethylene oxide) to lend mechanical integrity to free-standing films, and the films have been fabricated into solid polymer electrolytes. These electrolytes have been demonstrated to exhibit conductivity of 2 10(exp -5)S/cm (which is high, relative to the conductivities of other solid electrolytes) at ambient temperature, plus acceptably high stability. This type of norbornene-based polymeric solid electrolyte is in the early stages of development. Inasmuch as the method of synthesis of these polymers is inherently flexible and techniques for the fabrication of the polymers into solid electrolytes are amenable to optimization, there is reason to anticipate further improvements.

Cheung, Iris↗