SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Molecular mean excitation energies for ionic bonded molecules calculated according to the local plasma approximation are compared to the Bragg rule. Adjustments of 15% are calculated for LiF in agreement with experiments while 6% adjustments are predicted for HF and 3% for LiH.
The XON molecules (X=H, F, and Cl) have been studied using the singles and doubles coupled-cluster method that includes a perturbational estimate of the effects of connected triple excitations, CCSD(T), in conjunction with a double polarized triple-zeta basis set. The equilibrium geometries, dipole moments, harmonic vibrational frequencies and infrared intensities have been predicted. The X-O bond distance is shown to be abnormally long for X=F and Cl, and this is attributed to the degree of ionic bonding and the stability of NO(+). Based on Mulliken population analyses, it is shown that there is a significant degree of X(-), ON(+) ionic bonding character for FON and ClON, whereas for HON the ionic character is reduced and best described as H(+), NO(-). The stability of the XON molecule relative to the XNO isomer is shown to increase in the order HON<FON<ClON, although even ClON is 27.0 plus or minus 1.0 kcal/mol (0 K) less stable than ClNO. The XON (left and right arrow) XNO transition states are also investigated. FON and ClON possess the lowest barrier heights to isomerization (7.2 plus or minus 1.0 kcal/mol at 0 K), but these are sufficiently large to suggest that isomerization should not be rapid at low temperatures.
The local plasma model is used to study the effects of the chemical and physical state of a medium on its stopping power. The relationship between that model and a more exact quantum treatment of bound systems is elucidated by examining related quantities in both theories for the case of one and two-electron systems. Atomic mean excitation energies and straggling parameters in the local plasma model are compared with the accurate calculations of Inokuti et al. (1975, 1978, 1981). The use of the Gordon-Kim electron gas model of molecular bonding is used to determine the effects of covalent chemical bond shifts on the mean excitation energies for elements of the first two rows. Calculations of mean excitation energies of ionic bonded substances are presented, and the mean excitation energies of metals are discussed.
The K emission spectrum of oxygen and fluorine from a number of simple oxides and fluorides is divided into three to six sub-peaks. The spectra of many of these oxides and fluorides resemble one another owing to their basically ionic bonding. Certain sub-peaks, however, are ascribed to cross-over transitions and partially covalent energy levels. The different fluorine spectrum of Teflon is due to the hybrid nature of its covalent bonds.
Ionene polymers are polyammonium salts with positive nitrogens in the backbone, resulting from the polycondensation of diamines with dihalides or from the polycondensation of halo amines. The mechanism of formation of ionene polymers of different structures and their biological activity is reviewed. The antimicrobial and antifungal properties are compared with low molecular weight ammonium salts. Ionenes were found to combine with DNA by means of ionic bonds to yield similar complexes to those obtained with polyamines (spermine and spermidine). They also combine with nerve cell receptors and exercise a more powerful and longer duration ganglionic blocking action than their monomeric analogs. The antiheparin activity of ionenes and the thromboresistance of elastomeric ionene heparin coatings is described. The enhanced biological activity of ionenes as compared with low molecular weight compounds is attributed to a cooperative effect of a large number of positive charges on the polymeric chains.
Improvements in analytical technique, study of multielement partitioning in natural systems, and improvements in ionic radius values have permitted construction of Onuma diagrams, in which the logarithm of partition coefficient is plotted versus ionic radius. The optimum radii, corresponding to crystallographic sites, do change in response to changes in major element composition for any particular mineral-type. In natural systems elements compete for sites rather than substituting for another element. It is proposed on empirical grounds, for equilibrium ionic bonding, that Onuma diagram curves for a particular lattice site are parabolic near optimum radius, linear elsewhere, parallel for different valences, and mirror images on opposite sides of optimum. Deviations may be due to overlapping peaks, liquid structure, polyvalence, bonding differences, contamination, kinetics, alteration, etc. However, dominant crystal-chemical control is indicated.
The interaction of strontium films with the underlaying Si (100) surface and the Sr-promoted low-temperature oxidation of Si were investigated, using XPS, at three different Sr coverages (theta): theta = 0.55 monolayer (ML), theta = 1 ML, and theta = 1.85 ML. Oxygen adsorption was studied both at room temperature and at 500 C, and at oxygen exposures up to 2 x 10 to the 6th L (1 L = 10 to the -6th torr) and 2 x 10 to the 5th L, respectively. The XPS spectra of the Si2p, O1s, and Sr3d core levels were measured for the atomically clean Si, the Sr-covered Si, and for the Sr-covered Si after each oxygen exposure. Results indicate that Sr interacts with the Si(100) surface forming a strong ionic bond, and that Sr promotes the oxidation of the Si (100) surface.
A 16-residue peptide [(Ala-Glu-Ala-Glu-Ala-Lys-Ala-Lys)2] has a characteristic beta-sheet circular dichroism spectrum in water. Upon the addition of salt, the peptide spontaneously assembles to form a macroscopic membrane. The membrane does not dissolve in heat or in acidic or alkaline solutions, nor does it dissolve upon addition of guanidine hydrochloride, SDS/urea, or a variety of proteolytic enzymes. Scanning EM reveals a network of interwoven filaments approximately 10-20 nm in diameter. An important component of the stability is probably due to formation of complementary ionic bonds between glutamic and lysine side chains. This phenomenon may be a model for studying the insoluble peptides found in certain neurological disorders. It may also have implications for biomaterials and origin-of-life research.
The universal energy relation, discovered for metallic and covalent solids as well as nuclear matter, is tested for diatomic molecules. It is found that it applies well to covalent diatomic bonds, but that ionic diatomic bonds are in a distinct class. A simple extension of the universal binding energy relation that includes the effects of ionicity ensues. It yields accurate prediction of spectroscopic data for both ionic and covalent bonds in 150 molecules. The form of the covalent part is given by the universal relation, suggesting an intimate relationship between the energetics of solids and diatomic molecules.
Anharmonic vibrational frequencies and intensities are calculated for 1:1 and 2:2 (HCl)(sub n)(NH3)(sub n) and (HCl)(sub n)(H2O)(sub n) complexes, employing the correlation-corrected vibrational self-consistent field method with ab initio potential surfaces at the MP2/TZP computational level. In this method, the anharmonic coupling between all vibrational modes is included, which is found to be important for the systems studied. For the 4:4 (HCl)(sub n)(H2O)(sub n) complex, the vibrational spectra are calculated at the harmonic level, and anharmonic effects are estimated. Just as the (HCl)(sub n)(NH3)(sub n) structure switches from hydrogen-bonded to ionic for n=2, the (HCl)(sub n)(H2O)(sub n) switches to ionic structure for n=4. For (HCl)2(H2O)2, the lowest energy structure corresponds to the hydrogen-bonded form. However, configurations of the ionic form are separated from this minimum by a barrier of less than an O-H stretching quantum. This suggests the possibility of experiments on ionization dynamics using infrared excitation of the hydrogen-bonded form. The strong cooperative effects on the hydrogen bonding, and concomitant transition to ionic bonding, makes an accurate estimate of the large anharmonicity crucial for understanding the infrared spectra of these systems. The anharmonicity is typically of the order of several hundred wave numbers for the proton stretching motions involved in hydrogen or ionic bonding, and can also be quite large for the intramolecular modes. In addition, the large cooperative effects in the 2:2 and higher order (HCl(sub n)(H2O)(sub n) complexes may have interesting implications for solvation of hydrogen halides at ice surfaces.
A three-parameter expression that gives an accurate fit to diatomic potential curves over the entire range of separation for charge transfers between 0 and 1. It is based on a generalization of the universal binding-energy relation of Smith et al. (1989) with a modification that describes the crossover from a partially ionic state to the neutral state at large separations. The expression is tested by comparison with first-principles calculations of the potential curves ranging from covalently bonded to ionically bonded. The expression is also used to calculate spectroscopic constants form a curve fit to the first-principles curves. A comparison is made with experimental values of the spectroscopic constants.
This book on computer-aided design of polymers and composites introduces and discusses the subject from the viewpoint of atomic and molecular models. Thus, the origins of stiffness, strength, extensibility, and fracture toughness in composite materials can be analyzed directly in terms of chemical composition and molecular structure. Aspects of polymer composite reliability are considered along with characterization techniques for composite reliability, relations between atomic and molecular properties, computer aided design and manufacture, polymer CAD/CAM models, and composite CAD/CAM models. Attention is given to multiphase structural adhesives, fibrous composite reliability, metal joint reliability, polymer physical states and transitions, chemical quality assurance, processability testing, cure monitoring and management, nondestructive evaluation (NDE), surface NDE, elementary properties, ionic-covalent bonding, molecular analysis, acid-base interactions, the manufacturing science, and peel mechanics.
The transition-metal oxides are quite ionic; Mulliken population analyses for several oxides give a negative charge of about 0.7 electrons for oxygen. When the transition-metal d shell is only partially filled, the orbitals are involved in covalent bonds with O; both two-electron bonding (2)-antibonding (0) and one-electron bonding (2)-antibonding (1) bonds are formed. These covalent bonds occur in addition to the ionic bonding. There is d-sigma-O2 p sigma repulsion, and this repulsion is reduced when the d-sigma electron is promoted into an orbital which has dominantly 4sp-sigma character and is polarized away from O.
Thermoelectric materials provide a means for converting heat into electrical power using a fully solid-state device. Power-generating devices (which include individual couples as well as multicouple modules) require the use of ntype and p-type thermoelectric materials, typically comprising highly doped narrow band-gap semiconductors which are connected to a heat collector and electrodes. To achieve greater device efficiency and greater specific power will require using new thermoelectric materials, in more complex combinations. One such material is the p-type compound semiconductor Yb14MnSb11 (YMS), which has been demonstrated to have one of the highest ZT values at 1,000 C, the desired operational temperature of many space-based radioisotope thermoelectric generators (RTGs). Despite the favorable attributes of the bulk YMS material, it must ultimately be incorporated into a power-generating device using a suitable joining technology. Typically, processes such as diffusion bonding and/or brazing are used to join thermoelectric materials to the heat collector and electrodes, with the goal of providing a stable, ohmic contact with high thermal conductivity at the required operating temperature. Since YMS is an inorganic compound featuring chemical bonds with a mixture of covalent and ionic character, simple metallurgical diffusion bonding is difficult to implement. Furthermore, the Sb within YMS readily reacts with most metals to form antimonide compounds with a wide range of stoichiometries. Although choosing metals that react to form high-melting-point antimonides could be employed to form a stable reaction bond, it is difficult to limit the reactivity of Sb in YMS such that the electrode is not completely consumed at an operating temperature of 1,000 C. Previous attempts to form suitable metallization layers resulted in poor bonding, complete consumption of the metallization layer or fracture within the YMS thermoelement (or leg).
Several CSOV analyses are performed for the 1Sigma(+) state of NiCO, and it is shown that the importance of the CO sigma donation, Ni pi back donation, and interunit polarizations are virtually independent of the order of the CSOV steps, provided that the open-shell 3d sigma and 4s Ni orbitals are orthogonalized to the CO. This order of orthogonalization is consistent with the polarization of the Ni observed in the unconstrained SCF wavefunction. If instead the CO is orthogonalized to the open-shell Ni orbitals, the frozen orbital repulsion and entire CSOV analysis becomes unphysical. A comparison of the SCF and CAS SCF descriptions for the NiCO 1Sigma(+) state shows the importance of the s to d promotion and sd hybridization in reducing the repulsion and increasing the Ni to CO pi bonding. For LiF, CSOV analyses starting from both the neutral and ionic asymptotes show the bonding to be predominantly Li(+) - F(-). These examples show the uniqueness of the CSOV decomposition.
Bonding in the low-lying states of ScO, ScS, VO, and VS is theoretically studied. Excellent agreement is obtained with experimental spectroscopic constants for the low-lying states of ScO and VO. The results for VS and ScS show that the bonding in the oxides and sulfides is similar, but that the smaller electronegativity in S leads to a smaller ionic component in the bonding. The computed D0 of the sulfides are about 86 percent of the corresponding oxides, and the low-lying excited states are lower in the sulfides than in the corresponding oxides. The CPF method is shown to be an accurate and cost-effective method for obtaining reliable spectroscopic constants for these systems.
Schlosser et al. (1991) showed that the R dependence of the cohesive energy of partially ionic solids may be characterized by a two-term energy relationship consisting of a Coulomb term arising from the charge transfer, delta-Z, and a scaled universal energy function, E*(a *), which accounts for the partially covalent character of the bond and for repulsion between the atomic cores for small R; a* is a scaled length. In the paper by Schlosser et al., the normalized cohesive-energy curves of NaCl-structure alkali-halide crystals were generated with this expression. In this paper we generate the cohesive-energy curves of several families of partially ionic solids with different crystal structures and differing degrees of ionicity. These include the CsCl-structure Cs halides, and the Tl and Ag halides, which have weaker ionic bonding than the alkali halides, and which have the CsCl and NaCl structures, respectively. The cohesive-energy-curve parameters are then used to generate theoretical isothermal compression curves for the Li, Na, K, Cs, and Ag halides. We find good agreement with the available experimental compression data.
Explore the source record for details and available documents.