Search NASA⌕ Search

SEARCH · Search NASA

Results for “lagrange interpolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Interpolation And FFT Of Near-Field Antenna Measurements

Bivariate Lagrange interpolation applied to plane-polar measurement scans. Report discusses recent advances in application of fast-Fourier-transform (FFT) techniques to measurements of near radiation fields of antennas on plane-polar grid. Attention focused mainly on use of such measurements to calculate far radiation fields. Also discussion of use of FFT's in holographic diagnosis of distortions of antenna reflectors. Advantage of scheme, it speeds calculations because it requires fewer data and manipulations of data than other schemes used for this purpose.

Gatti, Mark S.↗
NASA NTRS1992

Design of an essentially non-oscillatory reconstruction procedure in finite-element type meshes

An essentially non oscillatory reconstruction for functions defined on finite element type meshes is designed. Two related problems are studied: the interpolation of possibly unsmooth multivariate functions on arbitary meshes and the reconstruction of a function from its averages in the control volumes surrounding the nodes of the mesh. Concerning the first problem, the behavior of the highest coefficients of two polynomial interpolations of a function that may admit discontinuities of locally regular curves is studied: the Lagrange interpolation and an approximation such that the mean of the polynomial on any control volume is equal to that of the function to be approximated. This enables the best stencil for the approximation to be chosen. The choice of the smallest possible number of stencils is addressed. Concerning the reconstruction problem, two methods were studied: one based on an adaptation of the so called reconstruction via deconvolution method to irregular meshes and one that lies on the approximation on the mean as defined above. The first method is conservative up to a quadrature formula and the second one is exactly conservative. The two methods have the expected order of accuracy, but the second one is much less expensive than the first one. Some numerical examples are given which demonstrate the efficiency of the reconstruction.

Abgrall, Remi↗
NASA NTRS1992

Curvilinear-Interpolation Program

INTERP2 is interactive program solving interpolation problems quickly and accurately. Solves for unknown based on true relationship among given values, whether linear or nonlinear. Using Lagrange interpolating polynomial, INTERP2 "draws" curve through input data points and interpolates to obtain f(x) for known x expediently. Written in BASIC.

Coppi, Michael J.↗
NASA NTRS1991

Design of an essentially non-oscillatory reconstruction procedure on finite-element type meshes

An essentially non-oscillatory reconstruction for functions defined on finite-element type meshes was designed. Two related problems are studied: the interpolation of possibly unsmooth multivariate functions on arbitrary meshes and the reconstruction of a function from its average in the control volumes surrounding the nodes of the mesh. Concerning the first problem, we have studied the behavior of the highest coefficients of the Lagrange interpolation function which may admit discontinuities of locally regular curves. This enables us to choose the best stencil for the interpolation. The choice of the smallest possible number of stencils is addressed. Concerning the reconstruction problem, because of the very nature of the mesh, the only method that may work is the so called reconstruction via deconvolution method. Unfortunately, it is well suited only for regular meshes as we show, but we also show how to overcome this difficulty. The global method has the expected order of accuracy but is conservative up to a high order quadrature formula only. Some numerical examples are given which demonstrate the efficiency of the method.

Abgrall, R.↗
NASA NTRS2006

Development of a Boundary Layer Property Interpolation Tool in Support of Orbiter Return To Flight

A new tool was developed to predict the boundary layer quantities required by several physics-based predictive/analytic methods that assess damaged Orbiter tile. This new tool, the Boundary Layer Property Prediction (BLPROP) tool, supplies boundary layer values used in correlations that determine boundary layer transition onset and surface heating-rate augmentation/attenuation factors inside tile gouges (i.e. cavities). BLPROP interpolates through a database of computed solutions and provides boundary layer and wall data (delta, theta, Re(sub theta)/M(sub e), Re(sub theta)/M(sub e), Re(sub theta), P(sub w), and q(sub w)) based on user input surface location and free stream conditions. Surface locations are limited to the Orbiter s windward surface. Constructed using predictions from an inviscid w/boundary-layer method and benchmark viscous CFD, the computed database covers the hypersonic continuum flight regime based on two reference flight trajectories. First-order one-dimensional Lagrange interpolation accounts for Mach number and angle-of-attack variations, whereas non-dimensional normalization accounts for differences between the reference and input Reynolds number. Employing the same computational methods used to construct the database, solutions at other trajectory points taken from previous STS flights were computed: these results validate the BLPROP algorithm. Percentage differences between interpolated and computed values are presented and are used to establish the level of uncertainty of the new tool.

Greene, Francis A.↗
DOE OSTI2025

A high-order computational framework for particle-resolved simulations of disperse multiphase flows

This work presents a high-order numerical approach for particle-resolved simulations of disperse multiphase flows, where the Navier-Stokes equations for fluid flow are solved using a high-order spectral element method in the Eulerian framework, and the particle phase is directly simulated with a discrete element method. The coupling between particles and fluids is explicitly handled using an adapted direct-forcing immersed boundary method. Unlike the conventional schemes, a high-order barycentric Lagrange interpolation method and a Gaussian projection kernel are used to ensure accurate momentum exchange between local boundary points and surrounding fluid nodes in the framework of high-order fluid solver. Benchmark tests of increasing complexity are conducted to demonstrate the accuracy and efficiency of our method. Here, it is found that our approach exhibits an excellent convergence performance, as the fluid element/grid is refined and the number of boundary points increases. Compared to conventional low-order methods, the proposed high-order framework enables the use of substantially larger fluid elements while maintaining high accuracy in modeling fluid-particle interactions, owing to the enhanced resolution of high-order basis functions. Moreover, since the primary unknowns are stored at element or grid nodes, the high-order approach offers improved efficiency in both CPU memory usage and total computational cost.

42 ENGINEERING↗
DOE OSTI2024

Simple and General Unitarity Conserving Numerical Real-Time Propagators of the Time-Dependent Schrödinger Equation Based on Magnus Expansion

Magnus expansion (ME) provides a general way to expand the real-time propagator of a time-dependent Hamiltonian within the exponential such that the unitarity is satisfied at any order. Here, we use this property and explicit integration of Lagrange interpolation formulas for the time-dependent Hamiltonian within each time interval and derive approximations that preserve unitarity for the differential time evolution operators of general time-dependent Hamiltonians. The resulting second-order approximation is the same as using the average of Hamiltonians for two end points of time. We identify three fourth-order approximations involving commutators of Hamiltonians at different times and also derive a sixth-order expression. A test of these approximations along with other available expressions for a two-state time-dependent Hamiltonian with sinusoidal time dependences provides information on the relative performance of these approximations and suggests that the derived expressions can serve as useful numerical tools for time evolution in time-resolved spectroscopy, quantum control, quantum sensing, real-time ab initio quantum dynamics, and open system quantum dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Quantum error mitigation by layerwise Richardson extrapolation

A widely used method for mitigating errors in noisy quantum computers is Richardson extrapolation, a technique in which the overall effect of noise on the estimation of quantum expectation values is captured by a single parameter that, after being scaled to larger values, is eventually extrapolated to the zero-noise limit. We generalize this approach by introducing layerwise Richardson extrapolation (LRE), an error mitigation protocol in which the noise of different individual layers (or larger chunks of the circuit) is amplified and the associated expectation values are linearly combined to estimate the zero-noise limit. The coefficients of the linear combination are analytically obtained from the theory of multivariate Lagrange interpolation. LRE leverages the flexible configurational space of layerwise unitary folding, allowing for a more nuanced mitigation of errors by treating the noise level of each layer of the quantum circuit as an independent variable. Furthermore, we provide numerical simulations demonstrating scenarios where LRE achieves superior performance compared to traditional (single-variable) Richardson extrapolation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Explicit Form for the Most General Lorentz Transformation Revisited

Explicit formulae for the 4×4 Lorentz transformation matrices corresponding to a pure boost and a pure three-dimensional rotation are very well known. Significantly less well known is the explicit formula for a general Lorentz transformation with arbitrary non-zero boost and rotation parameters. We revisit this more general formula by presenting two different derivations. The first derivation (which is somewhat simpler than previous ones appearing in the literature) evaluates the exponential of a 4×4 real matrix A, where A is a product of the diagonal matrix diag(+1,−1,−1,−1) and an arbitrary 4×4 real antisymmetric matrix. The formula for expA depends only on the eigenvalues of A and makes use of the Lagrange interpolating polynomial. The second derivation exploits the observation that the spinor product η†σ¯μχ transforms as a Lorentz four-vector, where χ and η are two-component spinors. The advantage of the latter derivation is that the corresponding formula for a general Lorentz transformation Λ reduces to the computation of the trace of a product of 2×2 matrices. Both computations are shown to yield equivalent expressions for Λ.

Science & Technology - Other Topics↗
NASA NTRS1973

A new technique for calculating reentry base heating

The laminar base flow field of a two-dimensional reentry body has been studied by Telenin's method. The flow domain was divided into strips along the x-axis, and the flow variations were represented by Lagrange interpolation polynomials in the transformed vertical coordinate. The complete Navier-Stokes equations were used in the near wake region, and the boundary layer equations were applied elsewhere. The boundary conditions consisted of the flat plate thermal boundary layer in the forebody region and the near wake profile in the downstream region. The resulting two-point boundary value problem of 33 ordinary differential equations was then solved by the multiple shooting method. The detailed flow field and thermal environment in the base region are presented in the form of temperature contours, Mach number contours, velocity vectors, pressure distributions, and heat transfer coefficients on the base surface. The maximum heating rate was found on the centerline, and the two-dimensional stagnation point flow solution was adquate to estimate the maximum heating rate so long as the local Reynolds number could be obtained.

Meng, J. C. S.↗
NASA NTRS1975

High resolution frequency analysis techniques with application to the redshift experiment

High resolution frequency analysis methods, with application to the gravitational probe redshift experiment, are discussed. For this experiment a resolution of .00001 Hz is required to measure a slowly varying, low frequency signal of approximately 1 Hz. Major building blocks include fast Fourier transform, discrete Fourier transform, Lagrange interpolation, golden section search, and adaptive matched filter technique. Accuracy, resolution, and computer effort of these methods are investigated, including test runs on an IBM 360/65 computer.

Decher, R.↗
NASA NTRS1988

FFT applications to plane-polar near-field antenna measurements

The four-point bivariate Lagrange interpolation algorithm was applied to near-field antenna data measured in a plane-polar facility. The results were sufficiently accurate to permit the use of the FFT (fast Fourier transform) algorithm to calculate the far-field patterns of the antenna. Good agreement was obtained between the far-field patterns as calculated by the Jacobi-Bessel and the FFT algorithms. The significant advantage in using the FFT is in the calculation of the principal plane cuts, which may be made very quickly. Also, the application of the FFT algorithm directly to the near-field data was used to perform surface holographic diagnosis of a reflector antenna. The effects due to the focusing of the emergent beam from the reflector, as well as the effects of the information in the wide-angle regions, are shown. The use of the plane-polar near-field antenna test range has therfore been expanded to include these useful FFT applications.

Gatti, Mark S.↗
NASA NTRS1994

Discrete-Layer Piezoelectric Plate and Shell Models for Active Tip-Clearance Control

The objectives of this work were to develop computational tools for the analysis of active-sensory composite structures with added or embedded piezoelectric layers. The targeted application for this class of smart composite laminates and the analytical development is the accomplishment of active tip-clearance control in turbomachinery components. Two distinct theories and analytical models were developed and explored under this contract: (1) a discrete-layer plate theory and corresponding computational models, and (2) a three dimensional general discrete-layer element generated in curvilinear coordinates for modeling laminated composite piezoelectric shells. Both models were developed from the complete electromechanical constitutive relations of piezoelectric materials, and incorporate both displacements and potentials as state variables. This report describes the development and results of these models. The discrete-layer theories imply that the displacement field and electrostatic potential through-the-thickness of the laminate are described over an individual layer rather than as a smeared function over the thickness of the entire plate or shell thickness. This is especially crucial for composites with embedded piezoelectric layers, as the actuating and sensing elements within these layers are poorly represented by effective or smeared properties. Linear Lagrange interpolation polynomials were used to describe the through-thickness laminate behavior. Both analytic and finite element approximations were used in the plane or surface of the structure. In this context, theoretical developments are presented for the discrete-layer plate theory, the discrete-layer shell theory, and the formulation of an exact solution for simply-supported piezoelectric plates. Finally, evaluations and results from a number of separate examples are presented for the static and dynamic analysis of the plate geometry. Comparisons between the different approaches are provided when possible, and initial conclusions regarding the accuracy and limitations of these models are given.

Heyliger, P. R.↗
NASA NTRS2012

Large Eddy Simulation (LES) of Particle-Laden Temporal Mixing Layers

High-fidelity models of plume-regolith interaction are difficult to develop because of the widely disparate flow conditions that exist in this process. The gas in the core of a rocket plume can often be modeled as a time-dependent, high-temperature, turbulent, reacting continuum flow. However, due to the vacuum conditions on the lunar surface, the mean molecular path in the outer parts of the plume is too long for the continuum assumption to remain valid. Molecular methods are better suited to model this region of the flow. Finally, granular and multiphase flow models must be employed to describe the dust and debris that are displaced from the surface, as well as how a crater is formed in the regolith. At present, standard commercial CFD (computational fluid dynamics) software is not capable of coupling each of these flow regimes to provide an accurate representation of this flow process, necessitating the development of custom software. This software solves the fluid-flow-governing equations in an Eulerian framework, coupled with the particle transport equations that are solved in a Lagrangian framework. It uses a fourth-order explicit Runge-Kutta scheme for temporal integration, an eighth-order central finite differencing scheme for spatial discretization. The non-linear terms in the governing equations are recast in cubic skew symmetric form to reduce aliasing error. The second derivative viscous terms are computed using eighth-order narrow stencils that provide better diffusion for the highest resolved wave numbers. A fourth-order Lagrange interpolation procedure is used to obtain gas-phase variable values at the particle locations.

Bellan, Josette↗
NASA NTRS1986

Higher-order flux difference splitting schemes for the Euler equations using upstream interpolations

A class of explicit two time-level, 2p + 1 space-point, (2p 1)-th order, upwind-biased flux difference splitting schemes are proposed for the numerical advection based on Lagrange's interpolation, and the method is an accord with the physical domain of dependence. A normalized Jacobian coefficient matrix is introduced to convert the schemes to hyperbolic systems of conservation laws, and approaches to make the higher-order schemes total variation stable are discussed. Accuracy and stability of the present schemes are examined, and implicit total variation diminishing schemes are developed for steady-state calculations.Application to gasdynamic problems for both steady and unsteady flows covering a wide range of Mach numbers is considered, and results for a blast wave passing a cylinder, and head-on collision of two blast waves over a circular arc, are presented. The flow patterns were found to be symmetric, and good resolution of flow structures was obtained.

Yang, J. Y.↗
DOE OSTI2023

Securely Aggregated Coded Matrix Inversion

Coded computing is a method for mitigating straggling workers in a centralized computing network, by using erasure-coding techniques. Federated learning is a decentralized model for training data distributed across client devices. In this work we propose approximating the inverse of an aggregated data matrix, where the data is generated by clients; similar to the federated learning paradigm, while also being resilient to stragglers. To do so, we propose a coded computing method based on gradient coding. We modify this method so that the coordinator does not access the local data at any point; while the clients access the aggregated matrix in order to complete their tasks. Here, the network we consider is not centrally administrated, and the communications which take place are secure against potential eavesdroppers.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2010

A New Representative for Small-Body Gravity Estimation

One of the options proposed in the 2009 Review of the U. S. Human Spaceflight Plans Committee calls for the consideration of robotic and human missions to asteroids. Beginning in 2000, the NEAR Shoemaker spacecraft inserted into orbit about the asteroid 433 Eros, and studied it for a year before landing. The Hayabusa satellite journeyed to 25143 Itokawa, and operated in a proximity of the asteroid for several months before landing to collect a return sample. Additionally, the DAWN satellite, which was launched in 2007, will explore the dwarf-planet Ceres and the asteroid 4 Vesta in the next three years. These are just several examples of current interests in exploring asteroids. In this paper, we explore an alternative for estimating the gravity field of a small body using observations of an orbiting satellite. Our approach uses two new mathematical tools, the quadratures (on a sphere) invariant under the icosahedral group, and a multiresolution representation of the gravity potential. With the near optimal quadratures on the sphere, we minimize the number of parameters needed to recover a function. Also, instead of estimating the coefficients of the spherical harmonics, the new quadratures allow us to estimate directly the values of the gravity field since they offer an analogue of the Lagrange-type interpolation.

Jones, Brandon A.↗