Search NASA⌕ Search

SEARCH · Search NASA

Results for “lamellar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

The stability of lamellar gamma-gamma-prime structures

The stability of stress-annealed gamma/gamma-prime lamellar structures were investigated using three nickel-base single-crystal alloys (the NASAIR 100 and two similar alloys, E and F, containing 5 and 10 wt pct Co, respectively) stress-annealed at 1000 C to form lamellae perpendicular to the applied stress. The rate of the lamellar thickening under various thermal and creep exposures was examined by SEM. For unstressed aging at 1100 C, the lamellar structures of the NASAIR and the E alloys exhibited continuous but slow lamellar coarsening, whereas the lamellae of the alloy F showed pronounced thickening plus spheroidization. Resistance to lamellar thickening was correlated with high magnitudes of lattice mismatch, which promoted a more regular lamellar structure and a finer spacing of misfit dislocations. Specimens which were tension-annealed prior to compressive creep testing exhibited an earlier onset of tertiary creep in comparison with only heat-treated specimens. This was associated with accelerated lamellar coarsening in the stress-annealed specimens.

Nathal, M. V.↗
NASA NTRS1971

Retraction of cold drawn polyethylene: the influence of lamellar thickeness and density

The role of crystal morphology in the retraction of oriented, linear polyethylene was studied utilizing samples crystallized under conditions controlled to vary, separately, lamellar crystal thickness and density. Samples were oriented in a simple shear deformation to a strain of 4.0 prior to measuring retraction tendency in creep and relaxation type tests. Characterizations of specimens were made using wide and small angle X-ray techniques. The specific morphological variations were chosen to test the hypothesis that a long range elastic restoring force can originate in conjunction with deformation of lamellar crystals and the consequent increase in lamellar crystal surface area and surface free energy. The results support this hypothesis.

Falender, J. R.↗
NASA NTRS1972

Retraction of cold-drawn polyethylene - Influence of lamellar thickness and density.

The role of crystal morphology in the retraction of oriented linear polyethylene was studied utilizing samples crystallized under conditions controlled to vary, separately, lamellar crystal thickness and density. Samples were oriented in a simple shear deformation to a strain of 4.0 prior to measuring retraction tendency in creep- and relaxation-type tests. Characterizations of specimens were made using wide- and small-angle x-ray techniques. The specific morphological variations were chosen to test the hypothesis that a long-range elastic restoring force can originate in conjunction with deformation of lamellar crystals and the consequent increase in lamellar crystal surface area and surface free energy. The results support this hypothesis.

Falender, J. R.↗
NASA NTRS1977

Spherical lamellar grating interferometer for airborne astronomical observations of far infrared objects

A lamellar-grating interferometer designed for airborne IR astronomy is described, and its response to a laboratory far-IR source and to Jupiter as viewed from NASA's Kuiper Airborne Observatory is discussed. The theory of lamellar-grating interferometers is reviewed, advantages over Michelson interferometers are noted, and the optical arrangement for the lamellar-grating instrument is indicated. The response of the instrument is illustrated using purged and unpurged spectra of a 1000-K blackbody source as well as a raw spectrum of Jupiter containing many absorption features (probably telluric) identified with rotation bands of H2O. It is noted that the interferometer's self-collimation allows for efficient operation with a minimum of auxiliary optics.

Pipher, J. L.↗
NASA NTRS1988

Formation of the lamellar structure in Group IA and IIID iron meteorites

Analytical EM, light microscopy, and electron microprobe analysis are used to study the lamellar plessite structure of Group IA and IIID iron meteorites. The alpha lamellae in IIID structures contained a compositional gradient from 6.1 + or - 0.7 wt pct Ni at the center of the alpha lamellae to 3.6 + or - 0.5 wt pct at the alpha/gamma interface. For the Group IA irons, compositions of 4 wt pct Ni in alpha and about 48 wt pct Ni in gamma are found. Convergent beam electron diffraction was used to characterize the orientation relations at the alpha/gamma interface in the lamellar regions of both Group IA and IIID. The phase transformations responsible for the observed lamellar structure in the IA and IIID chemical groups were also investigated.

Kowalik, J. A.↗
NASA NTRS1981

A quantitative study of factors influencing lamellar eutectic morphology during solidification

The factors that influence the shape of the solid-liquid interface of a lamellar binary eutectic alloy are evaluated. Alloys of carbon tetrabromide and hexachloroethane which serve as a transparent analogue of lamellar metallic eutectics are used. The observed interface shapes are analyzed by computer-aided methods. The solid-liquid interfacial free energies of each of the individual phases comprising the eutectic system are measured as a function of composition using a 'grain boundary groove' technique. The solid-liquid interfacial free energy of the two phases are evaluated directly from the eutectic interface. The phase diagram for the system, the heat of fusion as a function of composition, and the density as a function of composition are measured. The shape of the eutectic interface is controlled mainly by the solid-liquid and solid-solid interfacial free energy relationships at the interface and by the temperature gradient present, rather than by interlamellar diffusion in the liquid at the interface, over the range of growth rates studied.

Kaukler, W. F. S.↗
NASA NTRS1985

The role of near-surface plastic deformation in the wear of lamellar solids

It is shown in this paper that the role of surface and near-surface plastic deformation is especially significant in both sliding and abrasive wear of lamellar composites. Lamellar structures were produced artificially from alternate layers of pure copper and pure tin or lead foils. The resulting composites were tested in three different wear tests: single-pass abrasion by a sharp, hard abrader; multiple-pass rubbing by a hard, rounded abrader; and pin-on-disk sliding. In each case the counterface was a hard alloy steel. Tests were run with the composite lamellae in two orientations: perpendicular and parallel to the sliding direction. It was found that the composites had much less wear resistance and greater abradability when oriented perpendicular to the rub direction. The mechanisms for wear particle removal and the role of plastic deformation in the process were studied by plasticity analysis and by microscopic (SEM and optical) observation.

Kennedy, F. E.↗
NASA NTRS1990

Effect of convection on the microstructure of a lamellar eutectic growing with a stepped interface

A two dimensional model developed to study the influence of convective flow on the concentration field ahead of a growing lamellar eutectic is described when one phase projects out into the melt creating a stepped interface. The two dimensional convective flow field, which is periodic in the horizontal direction, was computed numerically using the software FLUENT. The velocity field generated due to the flow of melt over the steps was then incorporated into a finite difference scheme employed to solve the concentration field. The average interfacial composition was calculated and converted to lamellar spacing using the Jackson and Hunt minimum supercooling criterion. It was found that a stepped interface is more sensitive to convection than a planar interface.

Seth, Jayshree↗
NASA NTRS1991

Sintering of two phase lamellar microstructures

The effect of an inert phase on neck growth rates during sintering of lamellar structures is described. Sintering diagrams are constructed for an aggregate of two-phase Cu spheres with lamellar microstructure containing an inert phase. It is shown that the regions corresponding to lattice diffusion domination shrink due to the inert phase presence. As the dispersion becomes finer, the alterations in the map become substantial.

Courtney, T. H.↗
NASA NTRS1991

Effect of convection on the microstructure of a lamellar eutectic growing with a stepped interface

A two dimensional model developed to study the influence of convective flow on the concentration field ahead of a growing lamellar eutectic is described when one phase projects out into the melt creating a stepped interface. The two dimensional convective flow field, which is periodic in the horizontal direction, was computed numerically using the software FLUENT. The velocity field generated due to the flow of melt over the steps was then incorporated into a finite difference scheme employed to solve the concentration field. The average interfacial composition was calculated and converted to lamellar spacing using the Jackson and Hunt minimum supercooling criterion. It was found that a stepped interface is more sensitive to convection than a planar interface.

Seth, Jayshree↗
NASA NTRS2001

Lamellar Spacing Selection in Al-Si Eutectic System: a Theoretical Investigation

It is well known that irregular eutectics such as Al-Si and Fe-C exhibit larger lamellar spacings and undercoolings compared to the predictions made by the Jackson and Hunt (JH) theory. In this paper, we reexamine the JH theory and relax some of the assumptions used in that treatment. The modified theoretical model has enhanced capabilities to predict the lamellar spacing in both regular and irregular eutectics. For the Al-Si system in particular we identified two different spacing selection mechanisms:a) for a particular growth rate, a nearly isothermal interface can be achieved at a unique minimum spacing lambda(sub I); b) the average spacing in the microstructure (lambda(sub av) greater than lambda(sub I)) is essentially dictated by the undercooling of the faceted phase. Based on the modified theoretical model a semi-empirical expression has been developed to account for the influence of the temperature gradient. Application of a Mullin and Sekerka type stability analysis for eutectics will also be presented and the results compared to the modified JH model. It will be shown that the both theoretical approaches are in good agreement with each other and also with the published experimental measurements.

Catalina, Adrian V.↗
NASA NTRS1971

Calculated lamellar binding. I

Van der Walls bound lamellar solids interlayer binding energy computational model, discussing talc and pyrophyllite equilibrium stacking arrangements and force constants

Phillips, J. M.↗
NASA NTRS1976

Alloy and structural optimization of a directionally solidified lamellar eutectic alloy

Mechanical property characterization tests of a directionally solidified Ni-20 percent Cb-2.5 percent Al-6 percent Cr cellular eutectic turbine blade alloy demonstrated excellent long time creep stability and indicated intermediate temperature transverse tensile ductility and shear strength to be somewhat low for turbine blade applications. Alloy and structural optimization significantly improves these off-axis properties with no loss of longitudinal creep strength or stability. The optimized alloy-structure combination is a carbon modified Ni-20.1 percent Cb-2.5 percent Al-6.0 percent Cr-0.06 percent C composition processed under conditions producing plane front solidification and a fully-lamellar microstructure. With current processing technology, this alloy exhibits a creep-rupture advantage of 39 C over the best available nickel base superalloy, directionally solidified MAR M200+ Hf. While improved by about 20 percent, shear strength of the optimized alloy remains well below typical superalloy values.

Sheffler, K. D.↗
NASA NTRS1992

A modal analysis of lamellar diffraction gratings in conical mountings

A rigorous modal analysis of lamellar grating, i.e., gratings having rectangular grooves, in conical mountings is presented. It is an extension of the analysis of Botten et al. which considered non-conical mountings. A key step in the extension is a decomposition of the electromagnetic field in the grating region into two orthogonal components. A computer program implementing this extended modal analysis is capable of dealing with plane wave diffraction by dielectric and metallic gratings with deep grooves, at arbitrary angles of incidence, and having arbitrary incident polarizations. Some numerical examples are included.

Li, Lifeng↗
NASA NTRS1993

Lamellar olivine in the Divnoe achondrite: Evidence for high-pressure exsolution?

The olivine-rich Divnoe achondrite contains numerous large olivine grains which have a lamellar or banded appearance in back-scattered electron images, caused by minor compositional differences. One such grain, viewed in transmitted light, displays a system of lamellae with the same orientation and scale as the compositional banding. The only process known to produce such structure and chemical variability in olivine grains is high-pressure transformations between alpha-, beta- and gamma-olivines, but in other meteorites and in experimental products the structure is approximately 100 times finer than the Divnoe lamella.

Petaev, M. I.↗