Search NASA⌕ Search

SEARCH · Search NASA

Results for “landcover classification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Application of SEASAT-1 Synthetic Aperture Radar (SAR) data to enhance and detect geological lineaments and to assist LANDSAT landcover classification mapping

Digital SEASAT-1 synthetic aperture radar (SAR) data were used to enhance linear features to extract geologically significant lineaments in the Appalachian region. Comparison of Lineaments thus mapped with an existing lineament map based on LANDSAT MSS images shows that appropriately processed SEASAT-1 SAR data can significantly improve the detection of lineaments. Merge MSS and SAR data sets were more useful fo lineament detection and landcover classification than LANDSAT or SEASAT data alone. About 20 percent of the lineaments plotted from the SEASAT SAR image did not appear on the LANDSAT image. About 6 percent of minor lineaments or parts of lineaments present in the LANDSAT map were missing from the SEASAT map. Improvement in the landcover classification (acreage and spatial estimation accuracy) was attained by using MSS-SAR merged data. The aerial estimation of residential/built-up and forest categories was improved. Accuracy in estimating the agricultural and water categories was slightly reduced.

Sekhon, R.↗
NASA NTRS1985

Comparison of MSS and TM Data for Landcover Classification in the Chesapeake Bay Area: a Preliminary Report

An area bordering the Eastern Shore of the Chesapeake Bay was selected for study and classified using unsupervised techniques applied to LANDSAT-2 MSS data and several band combinations of LANDSAT-4 TM data. The accuracies of these Level I land cover classifications were verified using the Taylor's Island USGS 7.5 minute topographic map which was photointerpreted, digitized and rasterized. The the Taylor's Island map, comparing the MSS and TM three band (2 3 4) classifications, the increased resolution of TM produced a small improvement in overall accuracy of 1% correct due primarily to a small improvement, and 1% and 3%, in areas such as water and woodland. This was expected as the MSS data typically produce high accuracies for categories which cover large contiguous areas. However, in the categories covering smaller areas within the map there was generally an improvement of at least 10%. Classification of the important residential category improved 12%, and wetlands were mapped with 11% greater accuracy.

Mulligan, P. J.↗
DOE OSTI2024

United States Multi-Sector Dynamics land use and land cover base maps to support Human-Earth System Modeling

Datasets are land use and land cover (LULC) rasterized base maps at 30-m resolution for the conterminous United States (CONUS) for the years 2008, 2011, 2016, and 2019. Separate base maps are provided where LULC classifications are thematically congruent with Community Land Model (CLM), Land Use Harmonization (LUH2), and Global Change Analysis Model (GCAM), and a detailed decomposition of all combined land classes into a Multisector Dynamics (MSD) LULC product. Base maps were developed using empirically derived satellite (National Land Cover Dataset, MODIS) and combined observation datasets (Crop Data Layer, Protected Areas Database) and represent the most up-to-date accurate information on LULC in the CONUS. The four datasets encompass four different landcover classification systems: MSD Layers - The raw landcover classes obtained from reclassifying NLCD and USDA Crop data layers into a respective landcover class GCAM Layers - The MSD classes mosaiced, reclassified, and combined into the respective GCAM landcover classes CLM Layers - Similar process to GCAM layers, but mosaiced, reclassified, and combined MSD layers to their respective PFT classes LUH2 Layers - Similar process to both GCAM and CLM Layers, but mosaiced, reclassified and combined the MSD layers to align with the respective states

Food↗
NASA NTRS1987

Use of topographic and climatological models in a geographical data base to improve Landsat MSS classification for Olympic National Park

An unsupervised computer classification of vegetation/landcover of Olympic National Park and surrounding environs was initially carried out using four bands of Landsat MSS data. The primary objective of the project was to derive a level of landcover classifications useful for park management applications while maintaining an acceptably high level of classification accuracy. Initially, nine generalized vegetation/landcover classes were derived. Overall classification accuracy was 91.7 percent. In an attempt to refine the level of classification, a geographic information system (GIS) approach was employed. Topographic data and watershed boundaries (inferred precipitation/temperature) data were registered with the Landsat MSS data. The resultant boolean operations yielded 21 vegetation/landcover classes while maintaining the same level of classification accuracy. The final classification provided much better identification and location of the major forest types within the park at the same high level of accuracy, and these met the project objective. This classification could now become inputs into a GIS system to help provide answers to park management coupled with other ancillary data programs such as fire management.

Cibula, William G.↗
NASA NTRSDate not supplied

Assessing Alaskan boreal forest landcover affected by climate-wildfire interactions from ground truth surveys and NASA airborne remote sensing

Alaska’s boreal forest is facing unprecedented challenges under rapid climate warming (increasingly severe fires, droughts, pest/disease outbreaks) that may destabilize its function as a global carbon sink. Forests near Fairbanks may be especially vulnerable, impacting air quality and ecosystem services. We combined GT (ground truthing) with Airborne Visible InfraRed Imaging Spectrometer (AVIRIS-NG) images collected by the NASA Arctic-Boreal Vulnerability Experiment (ABoVE) program (2017-2019) to assess landcover change at five recently burned sites (2001-2019) of different fire severities and moisture regimes within 30 miles of Fairbanks. GT included tree seedling counts, understory % cover and >50% leaf canopy color assessment. 36 circular plots (1/30 ha radius) including 6 moderate to severely burned plots were selected across sites. 31 additional sites including 12 burned sites were geotagged in photos. AVIRIS images were processed from 29 spectral bands selected to identify changes in chlorophyll and water content. Images were segmented into natural boundaries (polygons) using ENVI 5.5 software. A spectral library of 8 AVIRIS bands with high between-class/low within-class variation was used in two random forest models to predict vegetation classes (model 1: 12 classes, model 2: 14 classes) in each AVIRIS scene, using 20% of the data as training data. Model 2 classified 20% more polygons overall, but only 42% of GT/geotagged polygons were correctly classified by both models. More forest sites were correctly classified (63%) than open vegetation (32%) or post-fire sites (46%). 50% of aspen forest and post-fire polygons were misclassified as shrubland. GT revealed that post-fire plots supported 134,000 (± 48,000) tree seedlings and saplings ha-1 (0.2 - 4 m height, 64% deciduous) versus 2500 (± 2100) shrubs ha-1 (1-6 m height). > 50% canopy browning was observed in conifer forest (8 plots) with no signs of insect infestation. Canopy herbivory > 50% (leaf miner, leaf beetle) and moose herbivory of tree bark was seen across aspen sites. Our study suggests: 1) low canopy vegetation presents challenges for improved landcover classification, and 2) aspen forest should be differentiated in vegetation maps which would aid in tracking herbivory.

Alaska↗
NASA NTRS2024

San Joaquin Valley Health & Air Quality II: Assessing Urban Heat Island Distribution and its Intersections with Air Quality to Understand Converging Vulnerabilities

The city of Stockton, California, located within the San Joaquin Valley (SJV), is a major hub for agricultural production and has endured the continuous threat to community health from nitrogen dioxide (NO 2 ) and increasing temperatures. The convergence of these issues occurs within historically segregated communities that are disproportionately facing health risks related to heat and air quality. Little Manila Rising (LMR), a social and environmental justice (EJ) advocacy non-profit, partnered with NASA DEVELOP for a second term project to evaluate county wide urban heat islands, sociodemographic vulnerability, landcover classification, and the convergence of these variables. We utilized Landsat 8 Thermal Infrared Sensor (TIRS) and Operational Land Imager (OLI) data to produce a land surface temperature (LST) and Normalized Difference Vegetation Index map. They added Centers for Disease Control (CDC) socioeconomic data from 2020 to identify which communities in Stockton were more susceptible to these environmental factors. Additionally, we used NAIP imagery to create a landcover map differentiating developed infrastructure from tree canopy cover. We discovered that south Stockton, where LMR resides, had the worst convergence of heat, air pollution, low canopy coverage and sociodemographic vulnerability compared to northern and rural parts of the city. This was further substantiated by statistical analysis showing a strong positive relationship between areas of high LST and low vegetation. The results provided LMR with compelling evidence to use in their EJ advocacy, and in their efforts to inform state officials of the discriminatory issues they face.

Urban Heat Islands↗
NASA NTRSDate not supplied

Remote Sensing of Lineage Functional Types for Modeling and Monitoring Biodiversity

Hyperspectral remote sensing has the potential to continuously scale plant function and plant diversity information from landscape to global extents. Numerous studies have indicated that VSWIR (400-2500 nm) reflectance properties of vegetation capture evolutionarily conserved biochemical, structural, and other functional attributes of plant species. Spectral properties conserved in plants provide the opportunity to both 1) aggregate species into lineages with improved classification accuracy and 2) link those lineages directly to plant traits. Full realization of this goal will enable parameterization of Land Surface Models (LSMs) with remotely sensed information, e.g., canopy nitrogen, and better representations of biodiversity and functional diversity in biogeographic studies. In this study, we use hyperspectral AVIRIS data from the 2013 HyspIRI campaign over the Southern Sierra Nevada, California flight box to investigate the potential for incorporating evolutionary thinking into landcover classification. We link the airborne hyperspectral data with vegetation plot data from roughly 1372 surveys and a phylogeny representing 1361 species. We aggregate species into lineages ranging from species level groups down to similar number of Plant Functional Types as often used in LSMs. We assessed the ability of Random Forest and Partial Least Squares Discriminant Analysis to discriminate across these different phylogenetic scales and determine the optimal number of lineages to classify. Although there are some temporal and spatial differences in our training data, our best approaches achieved moderate classification accuracy (Kappa > 0.65). Given an optimal number of lineages, we explored approaches to improve classifications including machine learning and unmixing approaches. This work suggests that lineage-based methods may be a promising way to leverage the huge amounts of data that will come from high resolution and high return interval hyperspectral data planned for the Surface Biology and Geology mission with sparsely sampled existing ground-based ecological data.

Hyperspectral↗
NASA NTRSDate not supplied

Evaluating Changes in Freshwater Health in the Tonlé Sap Basin using Remotely Sensed Data

The Tonlé Sap lake and river basin provide freshwater resources to about 4.5 million people in central Cambodia. Accelerating dam construction, intensifying agriculture, deforestation, and changing climate patterns threaten the health of the lake and the food security of nearby communities. NASA DEVELOP collaborated with Conservation International to calculate multiple components of the ecosystem vitality indicator of the Freshwater Health Index for Tonlé Sap lake from 2000 – 2020 using remote sensing. Landcover classifications, lake level altimetry, groundwater storage and nutrient flows were derived from multiple satellites including Landsat 5, Landsat 7, Landsat 8, Sentinel-2, the Global Precipitation Measurement (GPM)mission, and the Gravity Recovery and Climate Experiment (GRACE). Additionally, the Soil and Water Assessment Tool (SWAT) was used to analyze nutrient flow and water quality in the basin. A breakdown in the volume and regularity of annual lake levels from 2000-2020 was observed, reflecting increased pressure on water supply and agricultural productivity. A decrease in landcover naturalness was also observed and at least 8% of forested areas in the basin were lost while rice harvest intensity increased throughout the study period. Additionally, an initial water quality analysis was demonstrated using SWAT. Continued collaboration with Conservation International and local representatives will guide the remaining water quality analyses and allow them to make informed decisions regarding freshwater management and resource allocation in the Tonlé Sap lake and river basin.

Adriana Le Compte↗
NASA NTRS1982

Updating Landsat-derived land-cover maps using change detection and masking techniques

The California Integrated Remote Sensing System's San Bernardino County Project was devised to study the utilization of a data base at a number of jurisdictional levels. The present paper discusses the implementation of change-detection and masking techniques in the updating of Landsat-derived land-cover maps. A baseline landcover classification was first created from a 1976 image, then the adjusted 1976 image was compared with a 1979 scene by the techniques of (1) multidate image classification, (2) difference image-distribution tails thresholding, (3) difference image classification, and (4) multi-dimensional chi-square analysis of a difference image. The union of the results of methods 1, 3 and 4 was used to create a mask of possible change areas between 1976 and 1979, which served to limit analysis of the update image and reduce comparison errors in unchanged areas. The techniques of spatial smoothing of change-detection products, and of combining results of difference change-detection algorithms are also shown to improve Landsat change-detection accuracies.

Likens, W.↗
NASA NTRS2001

AVIRIS Land-Surface Mapping in Support of the Boreal Ecosystem-Atmosphere Study (BOREAS)

A key scientific objective of the original Boreal Ecosystem-Atmospheric Study (BOREAS) field campaign (1993-1996) was to obtain the baseline data required for modeling and predicting fluxes of energy, mass, and trace gases in the boreal forest biome. These data sets are necessary to determine the sensitivity of the boreal forest biome to potential climatic changes and potential biophysical feedbacks on climate. A considerable volume of remotely-sensed and supporting field data were acquired by numerous researchers to meet this objective. By design, remote sensing and modeling were considered critical components for scaling efforts, extending point measurements from flux towers and field sites over larger spatial and longer temporal scales. A major focus of the BOREAS follow-on program is concerned with integrating the diverse remotely sensed and ground-based data sets to address specific questions such as carbon dynamics at local to regional scales. The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) has the potential of contributing to BOREAS through: (1) accurate retrieved apparent surface reflectance; (2) improved landcover classification; and (3) direct assessment of biochemical/biophysical information such as canopy liquid water and chlorophyll concentration through pigment fits. In this paper, we present initial products for major flux tower sites including: (1) surface reflectance of dominant cover types; (2) a land-cover classification developed using spectral mixture analysis (SMA) and Multiple Endmember Spectral Mixture Analysis (MESMA); and (3) liquid water maps. Our goal is to compare these land-cover maps to existing maps and to incorporate AVIRIS image products into models of photosynthetic flux.

Roberts, Dar A.↗
NASA NTRS2002

The NASA John C. Stennis Environmental Geographic Information System

Contents include the following: 1. Introduction: Background information. Initial applications of the SSC EGIS. Ongoing projects. 2.Scope of SSC EGIS. 3. Data layers. 4. Onsite operations. 5. Landcover classifications. 6. Current activities. 7. GIS/Key. 8. Infrastructure base map - development. 9. Infrastructure base map - application. 10. Incorrected layer. 11. Corrected layer. 12. Emergency environmental response tool. 13. Future directions. 14. Bridging the gaps. 15. Environmental geographical information system.

Cohan, Tyrus↗
NASA NTRS2019

Satellite-Based Assessment of Grassland Conversion and Related Fire Disturbance in the Kenai Peninsula, Alaska

Spruce beetle-induced (Dendroctonus rufipennis (Kirby)) mortality on the Kenai Peninsula has been hypothesized by local ecologists to result in the conversion of forest to grassland and subsequent increased fire danger. This hypothesis stands in contrast to empirical studies in the continental US which suggested that beetle mortality has only a negligible effect on fire danger. In response, we conducted a study using Landsat data and modeling techniques to map land cover change in the Kenai Peninsula and to integrate change maps with other geospatial data to predictively map fire danger for the same region. We collected Landsat imagery to map land cover change at roughly five-year intervals following a severe, mid-1990s beetle infestation to the present. Landcover classification was performed at each time step and used to quantify grassland encroachment patterns over time. The maps of land cover change along with digital elevation models (DEMs),temperature, and historical fire data were used to map and assess wildfire danger across the study area. Results indicate the highest wildfire danger tended to occur in herbaceous and black spruce land cover types, suggesting that the relationship between spruce beetle damage and wildfire danger in costal Alaskan forested ecosystems differs from the relationship between the two in the forests of the coterminous United States. These change detection analyses and fire danger predictions provide the Kenai National Wildlife Refuge (KENWR) ecologists and other forest managers a better understanding of the extent and magnitude of grassland conversion and subsequent change in fire danger following the 1990s spruce beetle outbreak.

wildfire↗
NASA NTRS2019

Improved assessment of mangrove forests in Sundarbans East Wildlife Sanctuary using WorldView 2 and TanDEM-X high resolution imagery

Recent developments of remote sensing techniques which can capture both the structure and function of the ecosystem provide a more representative view of the landscape. These unique Earth observations were used to help improve traditional forestry surveys by providing species-specific land cover classes for mangrove forests in the Sundarbans East Wildlife Sanctuary. By combining optical data from WorldView2 (WV2; 2 m pixel) and a canopy height model derived using radar data from TanDEM-X (TDX; 12 m pixel), we identified nine mangrove and five non-mangrove classes by following an Iterative Self-Organizing Data Analysis Algorithm. Three dominant mangrove species accounted for nearly 50% of the sanctuary. Heritieria fomes disproportionately covered the largest area at 43%, overturning previous field-based estimates of Excoecaria agallocha dominance. E. agallocha and Sonneratia apetala, covered 3% and 1.47% of the sanctuary, respectively. Four mixed species classes were also identified with clear vegetation zonation patterns that trended toward species homogeneity with increasing distance from shore. The overall land cover accuracy (WV2: 89.33%; WV2-TDX: 89.89%), the Kappa Coefficient (WV2:0.88; WV2-TDX: 0.89) and change statistics between WV2 and WV2-TDX landcover classifications indicate that the WV2 imagery can separate mangrove community types without structural data. The combination of the land cover classifications and the canopy height model indicated that H. fomes were not only the most dominant forest but also, on average, the tallest (12.3 m) among the other eight mangrove types. Our large-scale mapping with high resolution optical and radar platforms can capture subtle changes in mangrove vegetation and canopy structural gradients more accurately and be used to monitor biodiversity changes and Aichi Biodiversity Targets and Indicators, which would contribute to biodiversity policy updating.

Md Mizanur Rahman↗
NASA NTRS2021

Maya Forest Water Resources II: Mapping Inundation Below the Forest Canopy in the Maya Tri-National Forest

To monitor seasonal flooding within the tri-National Maya Forest the team completed the methodology started by the Summer 2021 term to analyze changes in inundation dynamic throughout 2017. The team analyzed inundation dynamics in Google Earth Engine (GEE) using Earth observation products from the Landsat 8 Operational Land Imager (OLI), Advanced Land Observing Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR) 2, and International Space Station (ISS) Global Ecosystem Dynamics Investigation LiDAR (GEDI). The team improved the landcover classification using the Random Forest algorithm in GEE by adding canopy height data derived from GEDI, elevation and slope data from Copernicus, and additional multi-spectral band ratios from Landsat 8. The pixel-based land cover classification produced an overall accuracy of 88%. Experiments measuring inundation extent using L-band SAR included comparing results with a priori knowledge, topography datasets, and auxiliary datasets. We iteratively tested and found threshold values for identifying forested inundation using the ratio for HH divided by HV. The resulting methodology and products helped end users from Belize’s Land Information Center (LIC) and Forest Department, Guatemala’s Center for Monitoring and Evaluation (CEMEC), and Mexico’s El Colegio de la Frontera Sur (ECOSUR) manage land and water resources and protect communities.

Stephanie Jiménez↗
NASA NTRS2024

Iona Ecological Conservation: Utilizing Earth Observations to Understand Landscape Patterns and Assist in Wildlife Management in Iona National Park, Angola

Following the end of the Angolan civil war in 2002, human and livestock populations have increased exponentially within Iona National Park. An ongoing drought since 2017 has brought these people and livestock into increasing competition with local wildlife for resources – highlighting a conservation challenge that will become more entrenched as the effects of anthropogenic climate change increase. In 2019, African Parks began co-managing Iona National Park in Angola with the Angolan government, hoping to enact scientifically grounded management strategies to meet this challenge. To accomplish this, African Parks needed contemporary and historic information on the spatial distribution of landcover types within Iona and adjacent areas. We constructed and applied a Random Forest classifier in Google Earth Engine to multispectral imagery gathered from Landsat 5, 7, 8 and Sentinel-1 and 2 to meet this need. Using the classifier, we generated a time-series of land cover maps between 1990–2023, from which landscape metrics and change detection analysis were calculated to show how certain habitats and formations had changed over time. The resulting maps have producer and user’s accuracies above 87% and show four broad landcover regions within the study area. Notably, we observed a decrease in the park’s diversity as per the Shannon Diversity Index – an index that considers the richness of classes, as well the evenness of their distribution. A lack of arid specific land cover indices and ground-truthed training data from earlier years limited the accuracy and resolution of our landcover maps. However, this project still demonstrates that Earth observations can be used to form the basis of conservation policy in arid environments, where ground-truth data may be difficult to obtain or non-existent.

remote sensing↗
NASA NTRS1984

A comparison of the usefulness of canonical analysis, principal components analysis, and band selection for extraction of features from TMS data for landcover analysis

Three feature extraction methods, canonical analysis (CA), principal component analysis (PCA), and band selection, have been applied to Thematic Mapper Simulator (TMS) data in order to evaluate the relative performance of the methods. The results obtained show that CA is capable of providing a transformation of TMS data which leads to better classification results than provided by all seven bands, by PCA, or by band selection. A second conclusion drawn from the study is that TMS bands 2, 3, 4, and 7 (thermal) are most important for landcover classification.

Boyd, R. K.↗
NASA NTRS1979

LANDSAT Remote Sensing: Observations of an Appalachian mountaintop surface coal mining and reclamation operation

The potential benefits of using LANDSAT remote sensing data by state agencies as an aide in monitoring surface coal mining operations are reviewed. A mountaintop surface mine in eastern Kentucky was surveyed over a 5 year period using satellite multispectral scanner data that were classified by computer analyses. The analyses were guided by aerial photography and by ground surveys of the surface mines procured in 1976. The application of the LANDSAT data indicates that: (1) computer classification of the various landcover categories provides information for monitoring the progress of surface mining and reclamation operations; (2) successive yearly changes in barren and revegetated areas can be qualitatively assessed for surface mines of 100 acres or more of disrupted area; (3) barren areas consisting of limestone and shale mixtures may be recognized, and revegetated areas in various stages of growth may be identified against the hilly forest background.

Source record↗
NASA NTRS2012

An Automated Algorithm to Screen Massive Training Samples for a Global Impervious Surface Classification

An algorithm is developed to automatically screen the outliers from massive training samples for Global Land Survey - Imperviousness Mapping Project (GLS-IMP). GLS-IMP is to produce a global 30 m spatial resolution impervious cover data set for years 2000 and 2010 based on the Landsat Global Land Survey (GLS) data set. This unprecedented high resolution impervious cover data set is not only significant to the urbanization studies but also desired by the global carbon, hydrology, and energy balance researches. A supervised classification method, regression tree, is applied in this project. A set of accurate training samples is the key to the supervised classifications. Here we developed the global scale training samples from 1 m or so resolution fine resolution satellite data (Quickbird and Worldview2), and then aggregate the fine resolution impervious cover map to 30 m resolution. In order to improve the classification accuracy, the training samples should be screened before used to train the regression tree. It is impossible to manually screen 30 m resolution training samples collected globally. For example, in Europe only, there are 174 training sites. The size of the sites ranges from 4.5 km by 4.5 km to 8.1 km by 3.6 km. The amount training samples are over six millions. Therefore, we develop this automated statistic based algorithm to screen the training samples in two levels: site and scene level. At the site level, all the training samples are divided to 10 groups according to the percentage of the impervious surface within a sample pixel. The samples following in each 10% forms one group. For each group, both univariate and multivariate outliers are detected and removed. Then the screen process escalates to the scene level. A similar screen process but with a looser threshold is applied on the scene level considering the possible variance due to the site difference. We do not perform the screen process across the scenes because the scenes might vary due to the phenology, solar-view geometry, and atmospheric condition etc. factors but not actual landcover difference. Finally, we will compare the classification results from screened and unscreened training samples to assess the improvement achieved by cleaning up the training samples. Keywords:

Tan, Bin↗