Ligand-field transitions in tertiary phosphine and arsine complexes of ruthenium /II/ and osmium /II/.
Ligand field transitions in tertiary phosphine and arsine complexes of ruthenium and osmium
Crosby, G. A.↗
SEARCH · Search NASA
Results for “ligand fields”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electronic spectra and photophysics of platinum(II) complexes with alpha-diimine ligands - Solid-state effects. I - Monomers and ligand pi dimers
Two types of emission behavior for Pt(II) complexes containing alpha-diimine ligands have been observed in dilute solution. If the complex also has weak field ligands such as chloride, ligand field (d-d) excited states become the lowest energy excited states. If only strong field ligands are present, a diimine 3(pi-pi/asterisk/) state becomes the lowest. In none of the cases studied did metal-to-ligand charge transfer excited state lie lowest.
Miskowski, Vincent M.↗
Photochemistry of monodentate and bidentate carbonato complexes of rhodium (3)
A scheme for the photochemical fixation of water is proposed which involves a five-step reaction sequence; the first step involves the 2 electron reduction of a metal by a coordinated carbonate ligand, with corresponding oxidation of the carbonate to CO2 and O2. Ligand field photolysis of trans- (RH(en)2 H2O CO3) ClO4, and (Rh(en)2 CO3) CLO4 have been studied in the solid state and in aqueous solution at various pH values. Both salts are photoinert in the solid phase, but are quite photoreactive in aqueous solution. In solution, the monodentate ion undergoes efficient isomerization to a mixture of cis and trans - (Rh(en)2 H2O CO3)+, presumably with water exchange. A minor pH increase upon photolysis is evidence of inefficient carbonate (CO3 =) release, with formation of (Rh(en)2 (H2O)2)3+. In contrast, aqueous solutions of the bidentate carbonato complex undergo efficient pH decrease upon ligand field photolysis. Changes in the electronic spectrum (200-500 nm) and pH changes indicate that the desired redox is occurring. The pH increase is due to the aqueous behavior of CO2.
Sheridan, P. S.↗
Analysis of fluorescence spectra of rare-earth chelates. II - Dipyridyl complexes of europic chloride.
Fluorescence spectrum analysis of europic chloride dipyridyl chelates, deriving molecular geometric arrangement and interatomic distances from calculated ligand-field parameters
Bjorklund, S.↗
Mars - Photodesorption from mineral surfaces and its effects on atmospheric stability
Kinetic constraints are employed to identify the reactive chemisorbed complexes, to describe the mechanism of UV-accelerated desorption from Fe (+2) on mineral surfaces, and to estimate the photodesorption rate on Mars. In particular, it is proposed that gases such as O2, CO2, CO, H2O and N2 undergo an adsorption-desorption process at octahedrally coordinated Fe (+2) surface sites to produce seven-coordinate transition-state complexes. The ligand field stabilization energy acquired by these complexes lies between 16 and 18 kcal per mole. Published photocatalysis data are used to assess the role of photodesorption in Martian atmospheric chemistry and stability.
Huguenin, R. L.↗
Investigation of the effects of cobalt ions on epoxy properties
The effects of Co(acac)sub x complexes on MY-720 epoxy properties have been investigated. It appears that Co2(+) ions form antibonding or nonbonding orbitals which increase the free volume and also reduce the cohesiveness of the host epoxy. The effects of Co2(+) ions, on the other hand, seem to result in increased Cohesiveness of the epoxy. The experimental values of magnetic moments of both types of ions in MY-720 suggest that the orbital momentum contributions of the (3d) electrons are partially conserved, though the effect is more pronounced for Co2(+) ions. The coordination environment of the cobalt ions in the host epoxy does not appear to be uniquely defined. These results indicate that the effects of metal ions on resin properties cannot be easily predicted on the basis of ligand field theory argument alone. Complex interactions between metal ions and host epoxy molecular structure suggest the desirability of parallel experimental investigations of electronic, magnetic, and mechanical properties of metal ion-containing epoxy samples for comparison with theory.
Singh, J. J.↗
On the electronic structure and spectrum of CuF2 and CuCl2
Results are reported from SDCI and CPF ab initio computations for the ground and low-lying states of CuF2 and CuCl2. A large Gaussian basis set with functions up to the g level is employed, and the results are presented in tables and characterized in detail. Particular attention is given to the bond distances and force constants for the ligand-field states and the bond distances for the charge-transfer states. Good agreement is obtained between the CPF and SDCI values and with published experimental data.
Bauschlicher, Charles W., Jr.↗
The permanent electric dipole moment of CaOH
The X 2 Sigma(+), A 2Pi, and B 2Sigma(+) states of CaOH are characterized theoretically and experimentally, with a focus on the value of the permanent electric dipole moment (mu). Calculations based on SCF and SDCI studies of CaOH (Bauschlicher et al., 1984 and 1986) give mu values of 0.98, 0.49, and 0.11 D for the X, A, and B states, respectively, in good agreement with experiments in which the pure rotational spectra of these states were not detected. Modified Rittner (1951) and ligand-field models of these states are explored in detail, and the applicability of these results to observational searches for CaOH in circumstellar envelopes is indicated.
Bauschlicher, Charles W., Jr.↗
A new analysis of charge transfer and polarization for ligand-metal bonding - Model studies of Al4CO and Al4NH3
The nature of the bonding of CO and NH3 ligands to Al is analyzed, and the intra-unit charge polarization and inter-unit donation for the interaction of ligands with metals are studied. The consequences of metal-to-ligand and ligand-to-metal charge transfer are separately considered by performing a constrained space orbital variation (CSOV) with the electrons of the metal member of the complex in the field of frozen ligand. The electrons of the metal atoms are then frozen in the relaxed distribution given by the CSOV SCF wave function and the ligand electrons are allowed to relax. Quantitative measures of the importance of inter-unit charge transfers and intra-unit polarization are obtained using results of SCF studies of Al4CO and Al4NH3 clusters chosen to simulate the adsorption of the ligands at an on-top side of the Al(111) surface. The electrostatic attraction of the effective dipole moments of the metal and ligand units makes an important contribution to the bond.
Bagus, P. S.↗
The binding energies of Cu(+)-(H2O)n and Cu(+)-(NH3)n (n = 1-4)
The successive binding energies of up to four H2O and NH3 ligands to Cu(+) are computed at the self-consistent-field and modified coupled-pair functional levels. The most stable structures are those where all ligands are equivalent. Replacing Cu(+) by a point charge gives binding energies that are in good agreement with ab initio and experimental results, and is consistent with bonding that is largely charge dipole in nature. About two-thirds of the large reduction in ligand binding energy between the second and third ligand is due to ligand-ligand repulsion, while one-third is due to increased metal-ligand repulsion resulting from a loss of sd-sigma hybridization. The first and second ligand binding energies increase substantially at the correlated level due to an improved description of sd-sigma hybridization.
Bauschlicher, Charles W., Jr.↗
Calculation of Mg(+)-ligand relative binding energies
The calculated relative binding energies of 16 organic molecules to Mg(+) are compared with experimental results where available. The geometries of the ligands and the Mg(+)-ligand complexes arc optimized at the self-consistent field level using a 6-31G* basis set. The Mg(+) binding energies are evaluated using second-order perturbation theory and basis sets of triple-sigma quality augmented with two sets of polarization functions. This level of theory is calibrated against higher levels of theory for selected systems. The computed binding energies are accurate to about 2 kcal/mol.
Partridge, Harry↗
Mg(+)-ligand binding energies
Ab initio calculations are used to optimize the structures and determine the binding energies of Mg(+) to a series of ligands. Mg(+) bonds electrostatically with benzene, acetone, H2, CO, and NH3 and a self-consistent-field treatment gives a good description of the bonding. The bonding in MgCN(+) and MgCH3(+) is largely covalent and a correlated treatment is required.
Bauschlicher, Charles W., Jr.↗
A theoretical study of Na(H2O)n(+) (n = 1-4)
The successive H2O binding energies of Na(H2O)n(+) are in excellent agreement with experiment and are rather insensitive to electron correlation since the bonding is predominantly electrostatic. A point-charge model shows that changes in the successive binding energies are due primarily to ligand-ligand repulsion. Vibrational frequencies and IR intensities are determined for Na(H2O)n(+) (n = 1-4) at the self-consistent-field and second-order Moller-Plesset levels of theory to facilitate experimental study of these ions.
Bauschlicher, Charles W., Jr.↗
A determination of Mg(+)-ligand binding energies
Theoretical calculations employing large basis sets and including correlation are carried out for Mg(+) with methanol, water, and formaldehyde. For Mg(+) with ethanol and acetaldehyde, the trends in the binding energies are studied at the self-consistent-field level. The predictions for the binding energy of Mg(+) to methanol and water of 41 + or - 5 and 36 + or - 5 kcal/mol, respectively, are much less than the experimental upper bounds, of 61 + or - 5 and 60 + or - 5 kcal mol, determined by using photodissociation techniques. The theoretical results are inconsistent with the onset of Mg(+) production observed in the photodissociation experiments, as the smallest absorptions are calculated at about 80 kcal/mol for both Mg(+)-CH3OH and Mg(+)-H2O, and these transitions are to bound excited states. The binding energy for Mg(+) with formaldehyde is predicted to be similar to Mg(+)-H2O. The relative binding energies are in reasonable agreement with experiment. The binding energy of a second water molecule to Mg(+) is predicted to be similar to the first. This suggests that the reduced reaction rate observed for the second ligand is not a consequence of a significantly smaller binding energy, at least for the smaller ligards such as those considered in this work.
Bauschlicher, Charles W., Jr.↗
The Application B3LYP to Large Systems
The application of density functional theory (DFT), using the B3LYP functional, to a series of chemical problems is described. The first involves the calculation of silica-adsorbate bond energies, including both chemical bonds and weak hydrogen bonding. The calculation of vibrational frequencies for large organic systems is discussed. For the closed shell neutral systems, the B3LYP results are similar to the self- consistent- field results, however, for the positive ions, only the B3LYP level of theory is accurate and sufficiently inexpensive to allow the study of large systems. The final application involves the calculation of successive metal-ligand bond energies. The B3LYP bond energies and entropies are shown to be in good agreement with experiment.
Bauschlicher, Charles W.↗
Probing the Origin of the Open Circuit Voltage in Perovskite Quantum Dot Photovoltaics
Perovskite quantum dots (PQDs) have many properties that make them attractive for optoelectronic applications, including expanded compositional tunability and crystallographic stabilization. While they have not achieved the same photovoltaic (PV) efficiencies of top-performing perovskite thin films, they do reproducibly show high open circuit voltage (VOC) in comparison. Further understanding of the VOC attainable in PQDs as a function of surface passivation, contact layers, and PQD composition will further progress the field and may lend useful lessons for non-QD perovskite solar cells. Here, we use photoluminescence-based spectroscopic techniques to understand and identify the governing physics of the VOC in CsPbI3 PQDs. In particular, we probe the effect of the ligand exchange and contact interfaces on the VOC and free charge carrier concentration. The free charge carrier concentration is orders of magnitude higher than in typical perovskite thin films and could be tunable through ligand chemistry. Tuning the PQD A-site cation composition via replacement of Cs+ with FA+ maintains the background carrier concentration but reduces the trap density by up to a factor of 40, reducing the VOC deficit. These results dictate how to improve PQD optoelectronic properties and PV device performance and explain the reduced interfacial recombination observed by coupling PQDs with thin-film perovskites for a hybrid absorber layer.
perovskite quantum dot↗
Ab initio study of Fe(+)-benzyne
The interaction of Fe(+) with benzyne is studied using the self-consistent-field (SCF), complete active space SCF, and modified-coupled-pair functional levels of theory. The most stable structure is planar, where the Fe(+) has inserted into the in-plane pi bond, although the C-C bond distance suggests that some in-plane pi bonding remains. This system is compared with Sc(+) bonding to benzyne and other ligands.
Bauschlicher, Charles W., Jr.↗
Binding of isolated plant lectin by rhizobia during episodes of reduced gravity obtained by parabolic flight
Development of a legume root nodule is a complex process culminating in a plant/bacterial symbiosis possessing the capacity for biological dinitrogen fixation. Formation of root nodules is initiated by the binding and stabilization of rhizobia to plant root hairs, mediated in part by a receptor/ligand recognition system composed of lectins on the plant root surface and lectin-binding sites on the rhizobial cell surface. The dinitrogen fixation activity of these root nodules may be an important feature of enclosed, space-based life support systems, and may provide an ecological method to recycle nitrogen for amino acid production. However, the effects on nodule development of varied gravitational fields, or of root nutrient delivery hardware, remain unknown. We have investigated the effects of microgravity on root nodule formation, with preliminary experiments focused upon the receptor/ligand component. Microgravity, obtained during parabolic flight aboard NASA 930, has no apparent effect on the binding of purified lectin to rhizobia, a result that will facilitate forthcoming experiments using intact root tissues.
manned↗