Search NASA⌕ Search

SEARCH · Search NASA

Results for “light alkanes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Ammonia-Assisted Light Alkane Anti-coke Reforming on Isolated ReO x Sites in Zeolite

The conventional reforming produces H 2 with stoichiometric amounts of CO and CO 2 from hydrocarbons. Here, we show that CO x -free H 2 can be produced from ammonia-assisted reforming (ammoreforming) of natural gas liquids (C n H 2n+2 + nNH 3 = nHCN + (2n + 1) H 2 , n = 2 or 3) at the same conditions as the steam reforming. Such a process co-produces HCN, which can be easily separated from H 2 and used as value-added chemicals or for NH 3 recycling through hydrolysis. In addition, the ammoreforming of ethane and propane was realized over the Re-modified HZSM-5 zeolite rather than the traditional Pt-based catalyst for the BMA process (methane ammoreforming). The specific activity of the Re/HZSM-5 catalysts at 650 °C is up to 1 mol H2 /g Re /min (or 180 min –1 ) during ethane ammoreforming. The catalyst is highly coke resistant and shows only slight deactivation with a time-on-stream up to 20 h. Characterization of the fresh and used catalysts by X-ray absorption and Raman spectroscopies suggested that the isolated ReO x site grafted by AlO 4 – tetrahedral in the zeolite framework is responsible for the outstanding catalytic activity and coke resistibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Intermetallic Ni 3 Ga 1 Catalyst for Efficient Ammonia Reforming of Light Alkane

Ammonia reforming of light alkane is conventionally employed for HCN production where coproduct H 2 is burned for heating owing to the high reaction temperature (1200 °C) of such a highly endothermic process. Here, in this study, we show that a Ni 3 Ga 1 intermetallic compound (IMC) catalyst is highly efficient for such a reaction, realizing efficient conversion of C1–C3 alkanes at 575–750 °C. This makes it feasible for on-purpose CO x -free H 2 production assuming that ammonia, as an H 2 carrier, is ubiquitously available from renewable energy. At 650 °C and an alkane/ammonia ratio of 1/2, ethane and propane conversion of ~20% and methane conversion of 13% were obtained (with nearly 100% HCN selectivity for methane and ethane) over the unsupported Ni 3 Ga 1 IMC, which also shows high stability due to the absence of coke deposition. This breakthrough is achieved by employing a stoichiometric Ni 3 Ga 1 mixed oxalate solid solution as the precursor for the Ni 3 Ga 1 IMC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Catalytic Light Alkanes Conversion through Anaerobic Ammodehydrogenation

Catalytic transformation of light alkanes could have considerable practical value, yet remains one of the most challenging areas in catalysis research due to the inertness of the C–H bond. Here, we proposed an efficient ammodehydrogenation (ADeH) catalytic system for the direct C–N linkage between light alkanes and ammonia for CH 3 CN and H 2 (CO x free) production. This breakthrough is achieved over bifunctional metal-modified HZSM-5 catalysts, through the tandem dehydrogenation–amination–dehydrogenation mechanism. We show that ethane ADeH over the Pt/HZSM-5 catalyst can be realized under atmospheric pressure at temperatures as low as 350 °C. The specific rate of CH 3 CN is ~60 μmol/(g min), and the selectivity is up to 99% under such mild conditions. The yield of CH 3 CN increases with increasing temperature; however, the selectivity decreases due to the formation of HCN, C 2 H 4 , and CH 4 . Additionally, the Pt/HZSM-5 catalyst is coke-resistant during the ADeH owing to the strong interaction between NH 3 and the acid sites of the catalyst. So, we anticipate that the proposed ADeH could be extended for the transformation of various n/iso-alkanes with tunable selectivity to alkene and nitriles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Copper‐Catalyzed Dehydrogenative Amidation of Light Alkanes

Abstract The functionalization of C−H bonds in light alkanes, particularly to form C−N bonds, remains a challenge. We report the dehydrogenative coupling of amides with C1–C4 hydrocarbons to form N‐alkyl amide products with tBuOOtBu as oxidant, and a copper complex of a phenanthroline‐type ligand as catalyst. The reactions occurred in good yields in benzene or supercritical carbon dioxide as solvents. This strategy allowed for the determination of the relative reactivity of these alkane C−H bonds toward this amination process and showed, in contrast to prior work with larger alkanes, that the reactivity correlated with bond dissociation energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Reacting CO 2 with Light Alkanes to Value-Added Products

Catalytic conversion of anthropogenic carbon dioxide (CO 2 ) into value-added products is a promising strategy to mitigate global carbon emissions. Concurrently, the shale gas revolution has provided an abundant supply of light alkanes (methane, ethane, propane, and butane), presenting a unique opportunity to employ these underutilized hydrocarbons as an effective, low-cost hydrogen source for CO 2 reduction. In this Perspective, we summarize past efforts, current state, and future opportunities for reacting CO 2 with light alkanes to generate a diverse range of value-added products. Compared with direct alkane conversion, the introduction of CO 2 fundamentally alters reaction thermodynamics and kinetics, enabling selective C–H and C–C bond activation while suppressing catalyst deactivation from coke formation. Building on decades of research in dry reforming and CO 2 -assisted dehydrogenation, recent advances in catalyst design have enabled CO 2 -assisted dehydrogenation processes that approach chemical equilibrium for the selective production of olefins and syngas. Importantly, advances in catalyst design and reactor engineering have further expanded the product scope beyond gas-phase (syngas and olefins) to include liquid-phase (oxygenates and aromatics), and solid-phase products (carbon nanomaterials). We highlight key catalyst design principles for controlling reaction pathways and discuss major challenges and opportunities in developing selective and versatile platforms for the simultaneous upgrading of CO 2 and light alkanes.

CO2↗
DOE OSTI2023

Challenges and opportunities in plasma-activated reactions of CO 2 with light alkanes

We present upgrading CO 2 with surplus light alkanes to value-added chemicals using one-step plasma-activated processes under mild conditions, where opportunities and challenges for improving product selectivity focus on understanding reaction pathways, decoupling and benchmarking plasma and catalyst roles in reactions, tuning catalyst structural and electronic properties under plasma activation, and developing in situ characterization techniques.

03 NATURAL GAS↗
DOE OSTI2021

Simultaneously upgrading CO 2 and light alkanes into value-added products

We will discuss recent results from our group in reacting CO 2 and light alkanes to produce syngas, olefins, aromatics, and oxygenates. We will mainly use the simultaneous upgrading of CO 2 and ethane (SU-CO 2 Et) as examples to demonstrate the feasibility and reaction pathways of these processes. We will briefly discuss synthesis methods and essential structural characterization techniques that can be applied to SU-CO 2 Et catalysts. We will then illustrate how to identify and apply distinct active sites for different upgrading processes, using a combination of kinetic studies, in situ characterization, and density functional theory (DFT) calculations. We will conclude the Perspective by pointing out challenges and potential directions in catalyst design and synthesis, as well as structural characterization and mechanistic investigations, to further advance the simultaneous upgrading of CO 2 and light alkanes.

03 NATURAL GAS↗
DOE OSTI2021

Copper‐Catalyzed Dehydrogenative Amidation of Light Alkanes

Abstract The functionalization of C−H bonds in light alkanes, particularly to form C−N bonds, remains a challenge. We report the dehydrogenative coupling of amides with C1–C4 hydrocarbons to form N‐alkyl amide products with tBuOOtBu as oxidant, and a copper complex of a phenanthroline‐type ligand as catalyst. The reactions occurred in good yields in benzene or supercritical carbon dioxide as solvents. This strategy allowed for the determination of the relative reactivity of these alkane C−H bonds toward this amination process and showed, in contrast to prior work with larger alkanes, that the reactivity correlated with bond dissociation energies.

Fuentes, M. Ángeles↗
DOE OSTI2022

Intra-crystalline mesoporous zeolite encapsulation-derived thermally robust metal nanocatalyst in deep oxidation of light alkanes

Zeolite-confined metal nanoparticles (NPs) have attracted much attention owing to their superior sintering resistance and broad applications for thermal and environmental catalytic reactions. However, the pore size of the conventional zeolites is usually below 2 nm, and reactants are easily blocked to access the active sites. Herein, a facile in situ mesoporogen-free strategy is developed to design and synthesize palladium (Pd) NPs enveloped in a single-crystalline zeolite (silicalite-1, S-1) with intra-mesopores (termed Pd@IM-S-1). Pd@IM-S-1 exhibited remarkable light alkanes deep oxidation performances, and it should be attributed to the confinement and guarding effect of the zeolite shell and the improvement in mass-transfer efficiency and active metal sites accessibility. The Pd–PdO interfaces as a new active site can provide active oxygen species to the first C–H cleavage of light alkanes. This work exemplifies a promising strategy to design other high-performance intra-crystalline mesoporous zeolite-confined metal/metal oxide catalysts for high-temperature industrial thermal catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanism and kinetics of light alkane dehydrogenation and cracking over isolated Ga species in Ga/H-MFI

The objective of this study is to examine the mechanisms and kinetics of C2H6 dehydrogenation and n-C4H10 dehydrogenation and cracking over isolated Ga species in Ga/HMFI and to compare these results to those reported previously for C3H8 dehydrogenation and cracking. C2H6 dehydrogenation is found to be catalyzed by both [GaH]2+ and [GaH2]+ cations at similar turnover frequencies. Rate measurements over Ga/H-MFI containing predominantly [GaH2]+ cations reveal that C2H6 dehydrogenation rates exhibit a Langmuir.Hinshelwood dependence on C2H6 partial pressure at elevated temperatures (>730 K), consistent with the involvement of chemisorbed [C2H5.GaH]+ species. The reaction kinetics suggest that C2H6 dehydrogenation proceeds via heterolytic C-H cleavage of adsorbed C2H6 by [GaH2]+ cations to form H2 and [C2H5-GaH]+ species, which further decompose via β-hydride elimination to form C2H4. By contrast, C4H10 dehydrogenation and both terminal and central cracking are catalyzed exclusively by [GaH]2+ cations. All three reactions exhibit a Langmuir-Hinshelwood dependence on C4H10 partial pressure and are inhibited by H2. Ratios of dehydrogenation to cracking (total) and terminal to central cracking are approximately independent of C4H10 partial pressure consistent with the involvement of a common C4H10-derived surface intermediate. The observed reaction kinetics are consistent with an alkyl-mediated mechanism occurring over [GaH]2+, analogous to that reported previously for C3H8 dehydrogenation/cracking over Ga/H-MFI (Phadke, N. M.; et al. J. Am. Chem. Soc. 2019, 141, 1614-1627). The mechanism proceeds via facile, heterolytic dissociation of adsorbed C4H10 to form [C4H9-GaH]+-H+ cation pairs via methyl C-H-activated pathways. Dehydrogenation then proceeds via β-hydride elimination, respectively, forming butene, while terminal and central cracking proceed via C-H-activated H+ attack. Methylene activation was also considered but found to occur at a significantly lower rate. Theoretical analysis of the proposed reaction pathways leads to apparent activation enthalpies in good agreement with values extracted from the measured kinetics, thereby supporting the proposed pathways and the roles of [GaH]2+ and [GaH2]+ cations in the dehydrogenation and cracking of light alkanes on Ga/H-MFI.

Phadke, NM↗
DOE OSTI2022

Manganese Catalyzed Partial Oxidation of Light Alkanes

The catalytic partial oxidation of methane is achieved at low temperatures (<200 °C) using manganese oxides and manganese salts in mixtures of trifluoroacetic acid and trifluoroacetic anhydride. Dioxygen is used as the in situ terminal oxidant. For Mn oxides (e.g., MnO 2 , Mn 2 O 3 , and Mn 3 O 4 ), we studied stoichiometric methane partial oxidation in HTFA (TFA = trifluoroacetate). Using a Mn trifluoroacetate salt, at 180 °C and under 25 psig of methane, product selectivity for the mono-oxidized product methyl trifluoroacetate (MeTFA) is observed to be >90% at ~35% methane conversion at approximately 6 turnovers. Under our catalytic methane oxidation reaction conditions, MeTFA is stable against overoxidation, which explains the likely high selectivity at conversions >15%. Using combined experimental studies and DFT calculations, a mechanism involving soluble and molecular Mn species in the catalytic cycle is proposed. The proposed reaction pathway involves initial activation of Mn II by dioxygen, cleavage of a methane C–H bond by a Mn III hydroxo intermediate, rebound of the methyl radical to generate MeTFA, and finally regeneration of the starting Mn II complex. Also, this process is shown to be applicable to the oxidation of ethane, favoring the mono-oxidized product ethyl trifluoroacetate (EtTFA) and reaching ~46% conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Exploring mechanistic routes for light alkane oxidation with an iron–triazolate metal–organic framework

In this work, we computationally explore the formation and subsequent reactivity of various iron-oxo species in the iron–triazolate framework Fe 2 (m-OH) 2 (bbta) (H2bbta = 1H,5H-benzo(1,2-d:4,5- d0)bistriazole) for the catalytic activation of strong C–H bonds. With the direct conversion of methane to methanol as the probe reaction of interest, we use density functional theory (DFT) calculations to evaluate multiple mechanistic pathways in the presence of either N 2 O or H 2 O 2 oxidants. These calculations reveal that a wide range of transition metal-oxo sites – both terminal and bridging – are plausible in this family of metal–organic frameworks, making it a unique platform for comparing the electronic structure and reactivity of different proposed active site motifs. Based on the DFT calculations, we predict that Fe 2 (m-OH)2(bbta) would exhibit a relatively low barrier for N 2 O activation and energetically favorable formation of an [Fe(O)] 2+ species that is capable of oxidizing C–H bonds. In contrast, the use of H 2 O 2 as the oxidant is predicted to yield an assortment of bridging iron-oxo sites that are less reactive. We also find that abstracting oxo ligands can exhibit a complex mixture of both positive and negative spin density, which may have broader implications for relating the degree of radical character to catalytic activity. In general, we consider the coordinatively unsaturated iron sites to be promising for oxidation catalysis, and we provide several recommendations on how to further tune the catalytic properties of this family of metal–triazolate frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Identification of earth-abundant materials for selective dehydrogenation of light alkanes to olefins

Catalytic alkane dehydrogenation is of considerable importance in the synthesis of olefins industrially. However, discovery of highly active, selective, and stable heterogeneous catalysts to replace noble metal Pt remains challenging. By combining descriptor-based microkinetic modeling, high-throughput computations, machine-learning concepts, and experiments, we efficiently evaluated 1,998 bimetallic alloys and successfully identified Ni 3 Mo as one of the most promising catalysts in selective ethane dehydrogenation. This work will open new possibilities of using earth-abundant materials as catalysts for essential heterogeneous catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Can CO 2 -assisted alkane dehydrogenation lead to negative CO 2 emissions?

The utilization of light alkanes to generate value-added chemicals has gained significant attention due to the U.S. shale gas boom in recent decades. For example, after methane, ethane (3-16 vol.%) and propane (up to 5 vol.%) are the most abundant hydrocarbon species in shale gas deposits. Further, these inexpensive, widely available, but often underutilized, light alkanes can be used as a feedstock to produce olefins, which are among the most important petrochemical building blocks in chemical industry. Ethylene and propylene are used in the production of polymers (e.g., polyethylene, polypropylene) and epoxides (e.g., ethylene oxide, propylene oxide), as well as intermediates in the manufacture of numerous other chemicals (e.g., ethylene glycol, ethylbenzene, acetone, isopropanol, acrylonitrile).

03 NATURAL GAS↗
DOE OSTI2022

Connecting cation site location to alkane dehydrogenation activity in Ni/BEA catalysts

Ni-modified beta zeolite (Ni/BEA) catalysts activate carbon-hydrogen bonds in light alkanes, as demonstrated through isobutane reaction testing. Controlled synthesis of Ni/BEA allows for efficient introduction of ion-exchanged Ni sites at varying Ni loadings (0.43% - 1.8%). These catalysts exhibit site time yields (STY) for H2 production that increase with increasing Ni loading. A detailed analysis of secondary reactions and carbon deposition based on the relative molar flowrates of product C and H indicates that the observed increase in H2 STY with increasing Ni loading is likely attributed to both increasing alkane activation activity and increasing formation of hydrogen-deficient aromatic products retained within the catalyst pores. In situ diffuse-reflectance UV-visible-NIR absorbance and X-ray absorption spectroscopies indicate isolated, 4-coordinate Ni(2+) species for all loadings. Quantum mechanics/molecular mechanics modeling identifies two distinct Ni(2+) sites consistent with the structural characterization, but with differing relative stabilities due to their coordination environment. Computed reaction energetics for isobutane dehydrogenation demonstrate that the more stable Ni(2+) species at a six-membered 4Si-2Al ring, Ni-6MR, is less active for isobutane dehydrogenation than the less stable Ni(2+) at the five-membered 3Si-2Al ring, Ni-5MR. The differing local structure of the isolated cationic Ni sites in Ni/BEA offers a possible rationalization for the increased H2 STY observed at greater Ni loadings.

catalysts↗
DOE OSTI2022

Ultralow-Loading Pt/Zn Hybrid Cluster in Zeolite HZSM-5 for Efficient Dehydroaromatization

Minimizing Pt loading without sacrificing catalytic performance is critical, particularly for designing cost-efficient hydrocarbon transformation catalysts. Here, we show that ultralow-loading (0.001–0.05 wt %) Pt- and Zn-functionalized HZSM-5 catalysts, prepared through simple ion exchange and impregnation, are highly active and stable for light alkane dehydroaromatization (DHA). The specific activity of benzene, toluene, and xylene is up to 8.2 mol/g Pt /min (or 1592 min –1 ) over the 0.001 wt % Pt–Zn 2 /HZSM-5 catalyst during ethane DHA at 550 °C under atmospheric pressure. Additionally, such bimetallic Pt x –Zn y /HZSM-5 catalysts are highly stable in contrast to the monometallic Pt/HZSM-5 catalysts. The rate constant of deactivation (k deactiv ), according to the first-order generalized power law equation model, for the bimetallic catalysts is up to 120 times lower than that of the monometallic counterparts, depending on the Pt loading. In conclusion, this breakthrough is achieved through the formation of the [Pt 1 –Zn n ] δ+ hybrid cluster, instead of Pt 0 cluster–proton adducts, in the micropores of the ZSM-5 zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗