Search NASA⌕ Search

SEARCH · Search NASA

Results for “lignin monomers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Unconventional lignin monomers—Extension of the lignin paradigm

Lignin is largely produced by the oxidative radical coupling of the three monolignols, pcoumaryl, coniferyl, and sinapyl alcohols, which form the p-hydroxyphenyl, guaiacyl, and syringyl lignin units in the lignin polymer. However, it is increasingly appreciated that other “unconventional” phenolic compounds can also behave as lignin monomers participating in oxidative radical reactions during the lignification process and being also integrated into the lignin polymer in some plants. Various phenolic compounds have been found incorporated into the lignin, including phenolic compounds derived from the monolignol biosynthetic pathway (e.g., monolignol ester conjugates, caffeyl and 5-hydroxyconiferyl alcohols, hydroxycinnamaldehydes, among others). More fascinating still was the discovery in some plants of a series of phenolic compounds arising from other polyphenolic biosynthetic pathways, including flavonoids (tricin, dihydrotricin, naringenin, naringenin chalcone), hydroxystilbenes (resveratrol, piceatannol, and isorhapontigenin, and their O-glucosylated counterparts piceid, astringin, and isorhapontin), and ferulic acid amides (feruloyltyramine, and diferuloylputrescine), that are integrated into the lignin polymer. All of these discoveries indicate that the lignin structure is far more complex than previously thought, that the definition of lignin should not be restricted to a polymer derived solely from the three traditional monolignols, and that other unconventional lignin monomers must be considered, thus expanding the established definition of lignin. Here, the overriding factor remains, however, that lignification, the process of polymerization to the lignin polymer, allows this compositional flexibility because it is a simple chemical process.

59 BASIC BIOLOGICAL SCIENCES↗

Genetic loci simultaneously controlling lignin monomers and biomass digestibility of rice straw

Lignin content and composition are crucial factors affecting biomass digestibility. Exploring the genetic loci simultaneously affecting lignin-relevant traits and biomass digestibility is a precondition for lignin genetic manipulation towards energy crop breeding. In this study, a high-throughput platform was employed to assay the lignin content, lignin composition and biomass enzymatic digestibility of a rice recombinant inbred line population. Correlation analysis indicated that the absolute content of lignin monomers rather than lignin content had negative effects on biomass saccharification, whereas the relative content of p-hydroxyphenyl unit and the molar ratio of p-hydroxyphenyl unit to guaiacyl unit exhibited positive roles. Eight QTL clusters were identified and four of them affecting both lignin composition and biomass digestibility. Here, the additive effects of clustered QTL revealed consistent relationships between lignin-relevant traits and biomass digestibility. Pyramiding rice lines containing the above four positive alleles for increasing biomass digestibility were selected and showed comparable lignin content, decreased syringyl or guaiacyl unit and increased molar percentage of p-hydroxyphenyl unit, the molar ratio of p-hydroxyphenyl unit to guaiacyl unit and sugar releases. More importantly, the lodging resistance and eating/cooking quality of pyramiding lines were not sacrificed, indicating the QTL information could be applied to select desirable energy rice lines.

59 BASIC BIOLOGICAL SCIENCES↗

Coupling and Reactions of Lignols and New Lignin Monomers: A Density Functional Theory Study

This perspective summarizes and compares computational results for the thermodynamics of bond dissociation, coupling, and rearomatization for a number of noncanonical lignin monomer–lignol combinations that have been found to occur experimentally. The noncanonical lignin monomers discussed are tricin, caffeyl alcohol, 5-hydroxyconiferyl alcohol, and piceatannol. Among dimeric combinations, the results for bond dissociation are generally similar, but in cases for which trimers have been reported (tricin-lignol adducts), this value can be quite variable, with stereochemical and structural preferences. Among the adducts examined thus far, the energies associated with quinone methide formation and rearomatization are not dissimilar and would not impede subsequent polymerization. These fundamental studies may help to elucidate how lignin monomers are incorporated into the lignin polymer, provide leads for targeted genetic modification, and be of use in deconstruction for the production of commodity chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lignin Monomers from beyond the Canonical Monolignol Biosynthetic Pathway: Another Brick in the Wall

Lignin is conventionally defined as being formed by the oxidative polymerization of three main monolignols, p-coumaryl alcohol, coniferyl alcohol, and sinapyl alcohol, that are derived from the general phenylpropanoid biosynthetic pathway. Many other phenolic compounds that are also derived from the phenylpropanoid pathway are also known to perform as genuine lignin monomers in many plants, as is the case of the monolignol ester conjugates, phenolic compounds arising from the truncated biosynthesis of monolignols, or ferulate esters. Recent investigations, however, have indicated that phenolic compounds arising from beyond the canonical phenylpropanoid pathway, namely flavonoids, hydroxystilbenes, and hydroxycinnamic amides, may also behave as authentic lignin monomers and are incorporated into the lignin in some plants, further challenging the traditional definition of lignin. This is the case of the flavone tricin that is incorporated into the lignin of grasses and other monocots, the hydroxystilbene piceatannol (together with resveratrol and isorhapontigenin, at lower levels) that has been found in the lignins of palm fruit shells, their respective O-glucosides (astringin, piceid, and isorhapontin) that are present in the lignin of Norway spruce bark, or the ferulic amides feruloyltyramine, incorporated into the lignin of tobacco and potato tubers, and diferuloylputrescine, which appears to be incorporated into maize kernel lignin. These valuable compounds are potentially available in high amounts and at low cost and may be obtained from the waste products from the processing of agricultural or forest biomass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification and quantification of lignin monomers and oligomers from reductive catalytic fractionation of pine wood with GC × GC – FID/MS

Thorough lignin characterization is vital to understand the physicochemical properties of lignin and to evaluate lignocellulose biorefinery processes. In this study, an in-depth characterization of lignin oil, obtained from reductive catalytic fractionation (RCF) of pine wood, was performed with quantitative GC × GC – FID analysis and qualitative GC × GC – MS. By utilizing high-temperature resistant column sets in the GC × GC system and by applying a derivatization step, unambiguous detection of lignin monomers, dimers, and trimers is enabled. In addition to confirm the identity of eleven monomers, corresponding to 34 wt% of the RCF lignin oil, thirty-six dimers (16 wt%) and twenty-one trimers (7 wt%) were comprehensively identified by analysis of their mass spectra and quantified by a FID, encompassing the identity of an additional 23 wt% of the RCF lignin oil. The proposed structures reveal the interlinkages present in the dimeric and trimeric oligomers, containing β-5, β-1, β–β, 5–5, and a minor fraction of β-O-4 and 4-O-5 bonds. Furthermore, aliphatic end-units in the dimeric and trimeric molecules were identified, consisting of various substituents at the C4 position, that have been previously observed in the RCF-derived lignin monomers. To reduce complexity for analysis, the RCF oil was separated into six fractions, prior to analysis. The structural motifs (inter-unit linkages and end-units) that are found in the different fractions vary significantly, such that the lignin fractions extracted in more polar solvents contained higher molecular weight fragments and more hydroxyl containing structural motifs. Additionally, the identified structures of individual dimer and trimer molecules by GC × GC align well with and further complement the recent findings from 1 H– 13 C HSQC NMR spectroscopy, demonstrating complementarity between both 2D techniques to obtain a holistic view on both the molecular structures and the distribution of bonds and end-units in RCF oil. The combination of these two techniques provides a powerful tool for future RCF and other lignin depolymerization research.

09 BIOMASS FUELS↗

One-pot hydrodeoxygenation (HDO) of lignin monomers to C9 hydrocarbons co-catalysed by Ru/C and Nb 2 O 5

A physical mixture of Ru/C and Nb 2 O 5 is an effective catalyst for upgrading lignin monomers under low H 2 pressure at 250 °C to a clean cut of hydrocarbon liquid fuels. The reaction solvent is water with a small amount of methanol additive. Hydrodeoxygenation (HDO) was evaluated using dihydroeugenol (DHE) as an exemplary lignin monomer model. Under optimized conditions, 100% conversion of DHE and very high selectivity to propyl cyclohexane (C9 hydrocarbon) was achieved. Nb 2 O 5 was prepared at a low temperature (450 °C) and was shown to contain acid sites that enhance the production of fully deoxygenated products. The methanol additive serves as a hydrogen source for the Ru/C catalysed reduction of the aromatic ring. In addition, when a substrate mixture of DHE, isoeugenol and 4-allylsyringol simulating lignin products was employed, 100% conversion to propyl cyclohexane (76%) and propyl benzene (24%) was observed, thereby suggesting the general applicability of this catalyst system for funneling lignin monomers into a clean cut of hydrocarbon liquid fuels. This study sheds light on the function of each catalyst component and provides a simple and green utilization of biomass monomers as a feedstock for renewable hydrocarbon fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional theory study on the coupling and reactions of diferuloylputrescine as a lignin monomer

Diferuloylputrescine has been found in a variety of plant species, and recent work has provided evidence of its covalent bonding into lignin. Results from nuclear magnetic resonance spectroscopy revealed the presence of bonding patterns consistent with homo-coupling of diferuloylputrescine and the possibility of cross-coupling with lignin. In the present work, density functional theory calculations have been applied to assess the energetics associated with radical coupling, rearomatization, and dehydrogenation for possible homo-coupled dimers of diferuloylputrescine and cross-coupled dimers of diferuloylputrescine and coniferyl alcohol. Furthermore, the values obtained for these reaction energetics are consistent with those reported for monolignols and other novel lignin monomers. As such, this study shows that there would be no thermodynamic impediment to the incorporation of diferuloylputrescine into the lignin polymer and its addition to the growing list of non-canonical lignin monomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A thioacidolysis method tailored for higher‐throughput quantitative analysis of lignin monomers

Abstract Thioacidolysis is a method used to measure the relative content of lignin monomers bound by β‐O‐4 linkages. Current thioacidolysis methods are low‐throughput as they require tedious steps for reaction product concentration prior to analysis using standard GC methods. A quantitative thioacidolysis method that is accessible with general laboratory equipment and uses a non‐chlorinated organic solvent and is tailored for higher‐throughput analysis is reported. The method utilizes lignin arylglycerol monomer standards for calibration, requires 1–2 mg of biomass per assay and has been quantified using fast‐GC techniques including a Low Thermal Mass Modular Accelerated Column Heater (LTM MACH). Cumbersome steps, including standard purification, sample concentrating and drying have been eliminated to help aid in consecutive day‐to‐day analyses needed to sustain a high sample throughput for large screening experiments without the loss of quantitation accuracy. The method reported in this manuscript has been quantitatively validated against a commonly used thioacidolysis method and across two different research sites with three common biomass varieties to represent hardwoods, softwoods, and grasses.

09 BIOMASS FUELS↗

Supporting Information for manuscript: “A latitudinal gradient in S/G lignin monomer ratio driven by laccase in natural poplar variants”

Lignin composition plays a crucial role in plant structural integrity and environmental adaptation. However, the genetic and molecular mechanisms underlying natural variation in lignin composition remain poorly understood. This study investigates the syringyl-to-guaiacyl (S/G) lignin monomer ratio across a natural population of Populus trichocarpa spanning a latitudinal gradient along the Northwest coast of North America. By integrating biochemical, genomic, and geographic analysis, we identify key gene variants associated with S/G ratio differences. These datasets provide valuable insights into the evolutionary and functional genomics of lignin composition and serve as a resource for developing poplar variants optimized for forestry and bioenergy applications.

Poplar, lignin composition, laccases, latitude, ad↗

Enzymatic basis for C‐lignin monomer biosynthesis in the seed coat of Cleome hassleriana

Summary C‐lignin is a linear polymer of caffeyl alcohol, found in the seed coats of several exotic plant species, with promising properties for generation of carbon fibers and high value chemicals. In the ornamental plant Cleome hassleriana , guaiacyl (G) lignin is deposited in the seed coat for the first 6–12 days after pollination, after which G‐lignin deposition ceases and C‐lignin accumulates, providing an excellent model system to study C‐lignin biosynthesis. We performed RNA sequencing of seed coats harvested at 2‐day intervals throughout development. Bioinformatic analysis identified a complete set of lignin biosynthesis genes for Cleome . Transcript analysis coupled with kinetic analysis of recombinant enzymes in Escherichia coli revealed that the switch to C‐lignin formation was accompanied by down‐regulation of transcripts encoding functional caffeoyl CoA‐ and caffeic acid 3‐ O ‐methyltransferases ( CC o AOMT and COMT ) and a form of cinnamyl alcohol dehydrogenase (Ch CAD 4) with preference for coniferaldehyde as substrate, and up‐regulation of a form of CAD (Ch CAD 5) with preference for caffealdehyde. Based on these analyses, blockage of lignin monomer methylation by down‐regulation of both O ‐methyltransferases ( OMT s) and methionine synthase (for provision of C1 units) appears to be the major factor in diversion of flux to C‐lignin in the Cleome seed coat, although the change in CAD specificity also contributes based on the reduction of C‐lignin levels in transgenic Cleome with down‐regulation of Ch CAD 5. Structure modeling and mutational analysis identified amino acid residues important for the preference of Ch CAD 5 for caffealdehyde.

Zhuo, Chunliu↗

A tailored fast thioacidolysis method incorporating multi-reaction monitoring mode of GC-MS for higher sensitivity on lignin monomer quantification

Abstract Thioacidolysis is widely used for lignin structural characterization by cleaving β-aryl ethers to release syringyl (S), guaiacyl (G), and p -hydroxyphenyl (H) monomers followed by GC analysis. However, the traditional thioacidolysis method requires tedious extraction steps with chlorinated solvent underlying harmful to health, limiting its efficiency and application. Herein, an improved thioacidolysis method with high sensitivity for the quantitation of lignin-derived monomers was developed. The improved protocol used a quick, streamlined procedure to recover the monomeric products using ethyl acetate as extracting solvent and MS detector in multi-reaction monitoring mode to enhance its ability to detect extremely low concentration (0.1 ppb with signal-to-noise higher than 2) of monomeric products. Additionally, a fast GC program was established to speed up the GC quantitation. Several representative lignocellulose samples, including gymnosperm, angiosperm, and poaceae, were used to test this tailored method. The results demonstrated that the ratios of lignin monomer compositions determined by this method were consistent with that of traditional procedure despite the slightly higher monomer yields measured. More importantly, this method uses non-chlorinated solvent for microscale extraction and requires no evaporation step for workup, which is a green and efficient way for the quantification of lignin monomer compositions.

Forestry↗

Flavonoids naringenin chalcone, naringenin, dihydrotricin, and tricin are lignin monomers in papyrus

Recent studies demonstrate that several polyphenolic compounds produced from beyond the canonical monolignol biosynthetic pathways can behave as lignin monomers, participating in radical coupling reactions and being incorporated into lignin polymers. Here, we show various classes of flavonoids, the chalconoid naringenin chalcone, the flavanones naringenin and dihydrotricin, and the flavone tricin, incorporated into the lignin polymer of papyrus (Cyperus papyrus L.) rind. These flavonoids were released from the rind lignin by Derivatization Followed by Reductive Cleavage (DFRC), a chemical degradative method that cleaves the β-ether linkages, indicating that at least a fraction of each was integrated into the lignin as β-ether-linked structures. Due to the particular structure of tricin and dihydrotricin, whose C-3' and C-5' positions at their B-rings are occupied by methoxy groups, these compounds can only be incorporated into the lignin through 4'–O–β bonds. However, naringenin chalcone and naringenin have no substituents at these positions and can therefore form additional carbon–carbon linkages, including 3'– or 5'–β linkages that form phenylcoumaran structures not susceptible to cleavage by DFRC. Furthermore, Nuclear Magnetic Resonance analysis indicated that naringenin chalcone can also form additional linkages through its conjugated double bond. The discovery expands the range of flavonoids incorporated into natural lignins, further broadens the traditional definition of lignin, and enhances the premise that any phenolic compound present at the cell wall during lignification could be oxidized and potentially integrated into the lignin structure, depending only on its chemical compatibility. This study indicates that papyrus lignin has a unique structure, as it is the only lignin known to date that integrates such a diversity of phenolic compounds from different classes of flavonoids. This discovery will open up new ways to engineer and design lignins with specific properties and for enhanced value.

59 BASIC BIOLOGICAL SCIENCES↗

Manipulation of Lignin Monomer Composition Combined with the Introduction of Monolignol Conjugate Biosynthesis Leads to Synergistic Changes in Lignin Structure

Abstract The complexity of lignin structure impedes efficient cell wall digestibility. Native lignin is composed of a mixture of three dominant monomers, coupled together through a variety of linkages. Work over the past few decades has demonstrated that lignin composition can be altered through a variety of mutational and transgenic approaches such that the polymer is derived almost entirely from a single monomer. In this study, we investigated changes to lignin structure and digestibility in Arabidopsis thaliana in near-single-monolignol transgenics and mutants and determined whether novel monolignol conjugates, produced by a FERULOYL-CoA MONOLIGNOL TRANSFERASE (FMT) or a p-COUMAROYL-CoA MONOLIGNOL TRANSFERASE (PMT), could be integrated into these novel polymers to further improve saccharification efficiency. Monolignol conjugates, including a new conjugate of interest, p-coumaryl p-coumarate, were successfully integrated into high-H, high-G and high-S lignins in A. thaliana. Regardless of lignin composition, FMT- and PMT-expressing plants produced monolignol ferulates and monolignol p-coumarates, respectively, and incorporated them into their lignin. Through the production and incorporation of monolignol conjugates into near-single-monolignol lignins, we demonstrated that substrate availability, rather than monolignol transferase substrate preference, is the most important determining factor in the production of monolignol conjugates, and lignin composition helps dictate cell wall digestibility.

2D-HSQC-NMR↗

Lignin monomer conversion into biolubricant base oils

Despite progress in the depolymerization of lignin, only a few studies convert the obtained monomers to value-added products. Here we introduce a strategy to synthesize branched benzene lubricant (BBL) and branched cyclic lubricant (BCL) base oils from lignin-derived monomers and aldehyde. We perform carbon–carbon coupling via Brønsted acid-catalyzed hydroxyalkylation/alkylation (HAA) then hydrodeoxygenation (HDO). Optimum HAA reaction conditions achieve up to 90% guaiacol conversion and an HAA product containing 76% BBL and 24% enal condensation product over a P-SiO 2 catalyst. Subsequent HDO of HAA products over an Ir-ReO x /SiO 2 catalyst produces a lubricant-ranged mixture of BCL (C 24 ) up to yield (82%) and small fractions of dodecyl cyclohexane and C 10 and C 15 carbons alkanes. The kinematic viscosity, viscosity index, and Noack volatility of these base oils are comparable to commercial petroleum-derived poly α-olefin Group IV and refrigerant base oils. In conclusion, this approach provides a sustainable pathway for replacing petroleum-derived base oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural features of alternative lignin monomers associated with improved digestibility of artificially lignified maize cell walls

Plant biologists are seeking new approaches for modifying lignin to improve the digestion and utilization of structural polysaccharides in crop cultivars for the production of biofuels, biochemicals, and livestock. To identify promising targets for lignin bioengineering, we artificially lignified maize (Zea mays L.) cell walls with normal monolignols plus 21 structurally diverse alternative monomers to assess their suitability for lignification and for improving fiber digestibility. Lignin formation and structure were assessed by mass balance, Klason lignin, acetyl bromide lignin, gel-state 2D-NMR and thioacidolysis procedures, and digestibility was evaluated with rumen microflora and from glucose production by fungal enzymes following mild acid or base pretreatments. Highly acidic or hydrophilic monomers proved unsuitable for lignin modification because they severely depressed cell wall lignification. By contrast, monomers designed to moderately alter hydrophobicity or introduce cleavable acetal, amide, or ester functionalities into the polymer often readily formed lignin, but most failed to improve digestibility, even after chemical pretreatment. Fortunately, several types of phenylpropanoid derivatives containing multiple ester-linked catechol or pyrogallol units were identified as desirable genetic engineering targets because they readily formed wall-bound polymers and improved digestibility, presumably by blocking cross-linking of lignin to structural polysaccharides and promoting lignin fragmentation during mild acidic and especially alkaline pretreatment.

59 BASIC BIOLOGICAL SCIENCES↗