Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data

We propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. The fitting results are used for lattice correction. The method has been successfully demonstrated on the NSLS-II storage ring.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Arbitrarily complete Bell-state measurement using only linear optical elements

A complete Bell-state measurement is not possible using only linear-optic elements, and most schemes achieve a success rate of no more than 50%, distinguishing, for example, two of the four Bell states but returning degenerate results for the other two. It is shown here that the introduction of a pair of ancillary entangled photons improves the success rate to 75%. More generally, the addition of 2{sup N}-2 ancillary photons yields a linear-optic Bell-state measurement with a success rate of 1-1/2{sup N}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Universal squash model for optical communications using linear optics and threshold detectors

Transmission of photons through open-air or optical fibers is an important primitive in quantum-information processing. Theoretical descriptions of this process often consider single photons as information carriers and thus fail to accurately describe experimental implementations where any number of photons may enter a detector. It has been a great challenge to bridge this big gap between theory and experiments. One powerful method for achieving this goal is by conceptually squashing the received multiphoton states to single-photon states. However, until now, only a few protocols admit a squash model; furthermore, a recently proven no-go theorem appears to rule out the existence of a universal squash model. Here we show that a necessary condition presumed by all existing squash models is in fact too stringent. By relaxing this condition, we find that, rather surprisingly, a universal squash model actually exists for many protocols, including quantum key distribution, quantum state tomography, Bell's inequality testing, and entanglement verification.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accuracy requirements of optical linear algebra processors in adaptive optics imaging systems

The accuracy requirements of optical processors in adaptive optics systems are determined by estimating the required accuracy in a general optical linear algebra processor (OLAP) that results in a smaller average residual aberration than that achieved with a conventional electronic digital processor with some specific computation speed. Special attention is given to an error analysis of a general OLAP with regard to the residual aberration that is created in an adaptive mirror system by the inaccuracies of the processor, and to the effect of computational speed of an electronic processor on the correction. Results are presented on the ability of an OLAP to compete with a digital processor in various situations.

Downie, John D.↗

Preparation, optical and non-linear optical power limiting properties of Cu, CuNi nanowires

Metallic nanowires show excellent Plasmon absorption which is tunable based on its aspect ratio and alloying nature. We prepared Cu and CuNi metallic nanowires and studied its optical and nonlinear optical behavior. Optical properties of nanowires are theoretically explained using Gans theory. Nonlinear optical behavior is studied using a single beam open aperture z-scan method with the use of 5 ns Nd: YAG laser. Optical limiting is found to arise from two-photon absorption.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A high-accuracy optical linear algebra processor for finite element applications

Optical linear processors are computationally efficient computers for solving matrix-matrix and matrix-vector oriented problems. Optical system errors limit their dynamic range to 30-40 dB, which limits their accuray to 9-12 bits. Large problems, such as the finite element problem in structural mechanics (with tens or hundreds of thousands of variables) which can exploit the speed of optical processors, require the 32 bit accuracy obtainable from digital machines. To obtain this required 32 bit accuracy with an optical processor, the data can be digitally encoded, thereby reducing the dynamic range requirements of the optical system (i.e., decreasing the effect of optical errors on the data) while providing increased accuracy. This report describes a new digitally encoded optical linear algebra processor architecture for solving finite element and banded matrix-vector problems. A linear static plate bending case study is described which quantities the processor requirements. Multiplication by digital convolution is explained, and the digitally encoded optical processor architecture is advanced.

Casasent, D.↗

Non‐Linear Optical Properties of the ( RE ) 3 CuGeS 7 Family of Compounds

Abstract Non‐linear optical materials must possess a balanced combination of laser‐induced damage threshold (LDT) and second‐harmonic generation (SHG) and be phase matchable. In our previous work, chiral and polar La 3 CuGeS 7 was identified as a promising non‐linear optical material. Herein, we report the optimization of non‐linear optical properties through replacement of La with smaller lanthanides. It is determined that Gd 3 CuGeS 7 exhibits the best combination of SHG (1.6× AgGaS 2 at 88–105 μm particle size) and LDT (3× AgGaS 2 , 89 MW/cm 2 ) and is phase matchable. Based on changes in metal‐sulfur bond lengths and angles, we further propose structural optimization through solid‐solution formation and doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wavefront Sensing for WFIRST with a Linear Optical Model

In this paper we develop methods to use a linear optical model to capture the field dependence of wavefront aberrations in a nonlinear optimization-based phase retrieval algorithm for image-based wavefront sensing. The linear optical model is generated from a ray trace model of the system and allows the system state to be described in terms of mechanical alignment parameters rather than wavefront coefficients. This approach allows joint optimization over images taken at different field points and does not require separate convergence of phase retrieval at individual field points. Because the algorithm exploits field diversity, multiple defocused images per field point are not required for robustness. Furthermore, because it is possible to simultaneously fit images of many stars over the field, it is not necessary to use a fixed defocus to achieve adequate signal-to-noise ratio despite having images with high dynamic range. This allows high performance wavefront sensing using in-focus science data. We applied this technique in a simulation model based on the Wide Field Infrared Survey Telescope (WFIRST) Intermediate Design Reference Mission (IDRM) imager using a linear optical model with 25 field points. We demonstrate sub-thousandth-wave wavefront sensing accuracy in the presence of noise and moderate undersampling for both monochromatic and polychromatic images using 25 high-SNR target stars. Using these high-quality wavefront sensing results, we are able to generate upsampled point-spread functions (PSFs) and use them to determine PSF ellipticity to high accuracy in order to reduce the systematic impact of aberrations on the accuracy of galactic ellipticity determination for weak-lensing science.

Jurling, Alden S.↗

Five-wave-packet linear optics quantum-error-correcting code

In this article we outline a method for generating linear optics circuits that encode quantum-error-correcting codes. Using this method we produce a single-error-correcting code encoding one wave packet over five which can be implemented using linear optics and feed-forward correction. This code improves on the capacity of the best known code that can be implemented using linear optics and saturates the lower bound for the number of carriers needed for a single-error-correcting code. Our code can correct arbitrary single errors that occur randomly on each wave packet corresponding to a non-Gaussian error model, thus circumventing the so-called no-go theorem for Gaussian quantum-error correction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excited State and Non-linear Optical Properties of NIR Absorbing β-Thiophene-Fused BF{sub 2}-Azadipyrromethene Dyes—Computational Investigation

Density functional theory and time-dependent density functional theory computations were used to understand the electronic and photophysical parameters of NIR β-thiophene-fused BF{sub 2}-azadipyrromethene dyes. The computed data are in good agreement with those obtained experimentally and they provide insights into the origin of red shifted optical spectra compared to the parent aza-BODIPY, low Stokes shift, non-linear optical responses and quantitative description of the singlet–triplet energy gap. The resultant decrease in the HOMO − LUMO energy gap is responsible for the red shift. The possible use as non-linear optical materials is supported by large enhancement in the non-linear optical properties. On the basis of vertical triplet energies, their possible potential therapeutic use as a photosensitizer in photodynamic therapy is proposed. The singlet–triplet energetic gaps suggest that the β-thiophene-fused BF{sub 2}-azadipyrromethene dyes can act as a sensitizer to produce an efficient generation of singlet oxygen. Their optimal use as an efficient singlet fission materials has been proposed on the basis of excitation energies in the ground, lowest singlet and triplet excited states.

74 ATOMIC AND MOLECULAR PHYSICS↗

Learning linear optical circuits with coherent states

We analyze the energy and training data requirements for supervised learning of an M-mode linear optical circuit by minimizing an empirical risk defined solely from the action of the circuit on coherent states. When the linear optical circuit acts non-trivially only on k < M unknown modes (i.e. a linear optical k-junta), we provide an energy-efficient, adaptive algorithm that identifies the junta set and learns the circuit. We compare two schemes for allocating a total energy, E, to the learning algorithm. In the first scheme, each of the T random training coherent states has energy E/T. In the second scheme, a single random MT-mode coherent state with energy E is partitioned into T training coherent states. The latter scheme exhibits a polynomial advantage in training data size sufficient for convergence of the empirical risk to the full risk due to concentration of measure on the $(2MT-1)$-sphere. Specifically, generalization bounds for both schemes are proven, which indicate that for ε-approximation of the full risk by the empirical risk with high probability, $O(E^{2/3}M^{2/3}/\epsilon^{2/3})$ training states are sufficient for the first scheme and $O(E^{1/3}M^{1/3}/\epsilon^{2/3})$ training states are sufficient for the second scheme.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hyperentanglement concentration of nonlocal two-photon six-qubit systems with linear optics

Hyperentanglement, the entangled states in the multiple degrees of freedom (DOFs) of a photon system simultaneously, has attracted much attention recently as it can increase the capacity of quantum communication largely. Here we present the first scheme for concentrating the nonlocal two-photon six-qubit systems entangled in polarization, spatial-mode, and time-bin DOFs with linear optics. We construct the parity-check gates for the quantum states of nonlocal photon systems in all the three DOFs with linear-optical elements. Fortunately, our parity-check gate for one DOF does not affect the quantum states in the other two DOFs, which makes our hyperentanglement concentration protocol (hyper-ECP) can be implemented conveniently for polarization–spatial–time-bin partially hyperentangled states. This hyper-ECP is practical as it requires only linear-optical elements, and it can be directly generalized to improve the entanglement of nonlocal multi-photon systems entangled in three DOFs in the long-distance high-capacity quantum communication. - Highlights: • A linear hyperentanglement concentration protocol is proposed for photon systems. • Parity-check gates on one degree of freedom (DOF) will not affect the other two DOFs. • Polarization, spatial-mode, and time-bin DOFs are manipulated with linear optics. • Nonlocal maximally hyperentangled two-photon six-qubit systems are obtained. • Entanglement of multiphoton systems in three DOFs can be improved with this method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accuracy requirements of optical linear algebra processors in adaptive optics imaging systems

A ground-based adaptive optics imaging telescope system attempts to improve image quality by detecting and correcting for atmospherically induced wavefront aberrations. The required control computations during each cycle will take a finite amount of time. Longer time delays result in larger values of residual wavefront error variance since the atmosphere continues to change during that time. Thus an optical processor may be well-suited for this task. This paper presents a study of the accuracy requirements in a general optical processor that will make it competitive with, or superior to, a conventional digital computer for the adaptive optics application. An optimization of the adaptive optics correction algorithm with respect to an optical processor's degree of accuracy is also briefly discussed.

Downie, John D.↗

Optimal mode transformations for linear-optical cluster-state generation

In this paper, we analyze the generation of linear-optical cluster states (LOCSs) via sequential addition of one and two qubits. Existing approaches employ the stochastic linear-optical two-qubit controlled-Z (CZ) gate with success rate of 1/9 per operation. The question of optimality of the CZ gate with respect to LOCS generation has remained open. We report that there are alternative schemes to the CZ gate that are exponentially more efficient and show that sequential LOCS growth is indeed globally optimal. We find that the optimal cluster growth operation is a state transformation on a subspace of the full Hilbert space. Finally, we show that the maximal success rate of postselected entangling n photonic qubits or m Bell pairs into a cluster is (1/2) n-1 and (1/4) m-1 , respectively, with no ancilla photons, and we give an explicit optical description of the optimal mode transformations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fault tolerance in parity-state linear optical quantum computing

We use a combination of analytical and numerical techniques to calculate the noise threshold and resource requirements for a linear optical quantum computing scheme based on parity-state encoding. Parity-state encoding is used at the lowest level of code concatenation in order to efficiently correct errors arising from the inherent nondeterminism of two-qubit linear-optical gates. When combined with teleported error-correction (using either a Steane or Golay code) at higher levels of concatenation, the parity-state scheme is found to achieve a saving of approximately three orders of magnitude in resources when compared to the cluster state scheme, at a cost of a somewhat reduced noise threshold.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗