Fundamental Linkage Between Structure, Electrochemical Properties, and Chemical Compositions of LiNi1-x-yMnxCoyO2 Cathode Materials
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Search NASA
Results for “linkage”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ligand and Linkage Isomers of Bis(ethylthiocarbamato) Copper Complexes with Cyclic C 6 H 8 Backbone Substituents: Synthesis, Characterization, and Antiproliferation Activity
Abstract A series of isomeric bis(alkylthiocarbamate) copper complexes have been synthesized, characterized, and evaluated for antiproliferation activity. The complexes were derived from ligand isomers with 3‐methylpentyl (H 2 L 2 ) and cyclohexyl (H 2 L 3 ) backbone substituents, which each yield a pair of linkage isomers. The thermodynamic products CuL 2a/3a have two imino N and two S donors resulting in three five‐member chelate rings (555 isomers). The kinetic isomers CuL 2b/3b have one imino and one hydrazino N donor and two S donors resulting in four‐, six‐, and five‐member rings (465 isomers). The 555 isomers have more accessible Cu II/I potentials (E 1/2 =−811/−768 mV vs. ferrocenium/ferrocene) and lower energy charge transfer bands than their 465 counterparts (E 1/2 =−923/‐854 mV). Antiproliferation activities were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR‐90) using the MTT assay. CuL 2a was potent ( A549 EC 50 =0.080 μM) and selective ( IMR‐90 EC 50 / A549 EC 50 =25) for A549. Its linkage isomer CuL 2b had equivalent A549 activity, but lower selectivity ( IMR‐90 EC 50 / A549 EC 50 =12.5). The isomers CuL 3a and CuL 3b were less potent with A549 EC 50 values of 1.9 and 0.19 M and less selective with IMR‐90 EC 50 / A549 EC 50 ratios of 2.3 and 2.65, respectively. There was no correlation between reduction potential and A549 antiproliferation activity/selectivity.
Chemistry↗
PANDORA: A Parallel Dendrogram Construction Algorithm for Single Linkage Clustering on GPU
This paper introduces Pandora, a parallel algorithm for computing dendrograms, the hierarchical cluster trees for single linkage clustering (SLC). Current parallel approaches construct dendrograms by partitioning a minimum spanning tree and removing edges. However, they struggle with skewed, hard-to-parallelize real-world dendrograms. Consequently, computing dendrograms is the sequential bottleneck in HDBSCAN*[21], a popular SLC variant. Pandora uses recursive tree contraction to address this limitation. Pandora contracts nodes to construct progressively smaller trees. It computes the smallest contracted dendrogram and expands it by inserting contracted edges. This recursive strategy is highly parallel, skew-independent, work-optimal, and well-suited for GPUs and multicores. We develop a performance portable implementation of Pandora in Kokkos[31] and evaluate its performance on multicore CPUs and multi-vendor GPUs (e.g., Nvidia, AMD) for dendrogram construction in HDBSCAN*. Multithreaded Pandora is 2.2x faster than the current best-multithreaded implementation. Our GPU version achieves 6-20x speedup on AMD GPUs and 10-37x on NVIDIA GPUs over multithreaded Pandora. Pandora removes HDBSCAN*’s sequential bottleneck, greatly boosting efficiency, particularly with GPUs.
Sao, Piyush↗
A flight investigation of the reduction of aileron operating force by means of fixed tabs and differential linkage, with notes on linkage design
Flight tests were made to demonstrate the particularity of employing fixed tabs in conjunction with a suitably designed differential linkage to reduce the force required to operate ailerons. The tests showed the system to be practicable with tabs of the inset type. The relative ineffectiveness of attached tabs for changing the aileron floating angle rendered them unsuitable. Experience gained in the investigation has indicated that the use of the system is limited to maximum deflections of one aileron relative to the other of less than 30 degrees and that the differential linkage should always be designed on the basis of the highest probable floating angle.
Soule, H A↗
Ground Simulator Studies of a Nonlinear Linkage in a Power Control System
An investigation was made to determine the characteristics of a nonlinear linkage installed in a power control system incorporated in a ground simulator. The nonlinear linkage provided for increased control-stick motion for relatively small simulator response at control motions near neutral. The quality of the control system was rated on the ease and precision with which various tracking tasks were performed by the pilots who operated the simulator. The results obtained with the nonlinear linkage installed in the control system were compared with those obtained by using the normal linear control system. Several combinations of nonlinearity of the linkage were tested for various dynamic characteristics of the simulator. It was found that the pilots were able to track almost as well with the nonlinear linkage installed as with the normal system. All of the pilots were of the opinion, however, that the nonlinearity was an undesirable feature in the control system because of the apparent lack of simulator response through the neutral range of the linkage where relatively large stick deflections could be made with very little simulator motion. The results showed that increased lag between the target and chair position, higher stick-force levels, and uneven stick forces due to the dynamics of the linkage were general characteristics of all the nonlinear linkage conditions tested. It was also found that for cases of low simulator damping, rapid control motions caused considerably higher overshoots when the nonlinear linkage was installed than were obtained for the normal linear control system. These characteristics were considered to be sufficiently undesirable to out-weigh the advantages to be gained from the use of a nonlinear linkage in the control system of an airplane.
Assadourian, Arthur↗
Linkage map construction using limited parental genotypic information
Abstract Genetic linkage maps based on single nucleotide polymorphisms (SNPs) represent an essential tool for a variety of genomic analyses. Today, next-generation sequencing (NGS) enables rapid genotyping of different mapping populations based on thousands of SNPs and the construction of highly saturated linkage maps. Nevertheless, missing data in the genotyping of the parental lines creates a bottleneck that determines the number of SNPs that can be used for the linkage map. As a proof of concept, a highly saturated genetic linkage map was constructed using the imputed genotypic data of a recombinant inbred line (RIL) population and the limited genotypic information of its parental lines. Two ABH genotype files were created from a pseudo-parental genotypic data set that includes all the SNPs present in the RIL population. In the first ABH file pseudo-parental 1 was considered parental A, while in the second pseudo-parental 1 was considered parental B. These two duplicate ABH genotype files were merged by chromosome and subjected to linkage map analysis. Since the ABH data were duplicated, two mirrored linkage groups were generated per chromosome. The correct linkage map was identified and selected based on the partial genotypic data of the parental lines. This strategy was effective for constructing a highly saturated linkage map of 33,421 SNPs based on the genotyping of 205 RILs and a limited number of 100 SNPs present in the parental lines. This strategy enables the use of all the NGS SNP data obtained from a low-coverage sequencing experiment in the mapping population.
59 BASIC BIOLOGICAL SCIENCES↗
Disruption of Brachypodium lichenase alters metabolism of mixed‐linkage glucan and starch
Mixed-linkage glucan, which is widely distributed in grasses, is a polysaccharide highly abundant in cell walls of grass endosperm and young vegetative tissues. Lichenases are enzymes that hydrolyze mixed-linkage glucan first identified in mixed-linkage glucan-rich lichens. In this study, we identify a gene encoding a lichenase we name Brachypodium distachyon LICHENASE 1 (BdLCH1), which is highly expressed in the endosperm of germinating seeds and coleoptiles and at lower amounts in mature shoots. RNA in situ hybridization showed that BdLCH1 is primarily expressed in chlorenchyma cells of mature leaves and internodes. Disruption of BdLCH1 resulted in an eight-fold increase in mixed-linkage glucan content in senesced leaves. Consistent with the in situ hybridization data, immunolocalization results showed that mixed-linkage glucan was not removed in chlorenchyma cells of lch1 mutants as it was in wild type and implicate the BdLCH1 enzyme in removing mixed-linkage glucan in chlorenchyma cells in mature vegetative tissues. We also show that mixed-linkage glucan accumulation in lch1 mutants was resistant to dark-induced degradation, and 8-week-old lch1 plants showed a faster rate of starch breakdown than wild type in darkness. Here our results suggest a role for BdLCH1 in modifying the cell wall to support highly metabolically active cells.
59 BASIC BIOLOGICAL SCIENCES↗
Linkages in thermal copolymers of lysine
The thermal copolymerization of lysine with other alpha-amino acids was studied. The identity of the second amino acid influences various properties of the polymer obtained, including the proportion of alpha and epsilon linkages of lysine. A review of linkages in proteinoids indicates alpha and beta linkages for aspartic acid, alpha and gamma linkages for glutamic acid, alpha and epsilon linkages for lysine, and alpha linkages for other amino acids. Thermal proteinoids are thus more complex in types of linkage than are proteins.
Fox, S. W.↗
Linkages in thermal copolymers of lysine
The thermal copolymerization of lysine with other alpha-amino acids has been studied further. The identity of the second amino acid influences various properties of the polymer obtained, including the proportion of alpha and epsilon linkages of lysine. A review of linkages in proteinoids indicates alpha and beta linkages for aspartic acid, alpha and gamma linkages for glutamic acid, alpha and epsilon linkages for lysine, and alpha linkages for other amino acids. Thermal proteinoids are thus more complex in types of linkage than are proteins
Fox, S. W.↗
Methyl α‐D‐galactopyranosyl‐(1→3)‐β‐D‐galactopyranoside and methyl β‐D‐galactopyranosyl‐(1→3)‐β‐D‐galactopyranoside: Glycosidic linkage conformation determined from MA'AT analysis
Abstract MA'ATanalysis has been applied to two biologically‐importantO‐glycosidic linkages in two disaccharides, α‐D‐Galp‐(1→3)‐β‐D‐GalpOMe (3) and β‐D‐Galp‐(1→3)‐β‐D‐GalpOMe (4). Using density functional theory (DFT) to obtain parameterized equations relating a group of trans‐O‐glycosidic NMR spin‐couplings to eitherphi(ϕ') orpsi(ψ'), and experimental 3 J COCH , 2 J COC , and 3 J COCC spin‐couplings measured in aqueous solution in 13 C‐labeled isotopomers, probability distributions ofϕ'andψ'in each linkage were determined and compared to those determined by aqueous 1‐μs molecular dynamics (MD) simulation. Good agreement was found between theMA'ATand single‐state MD conformational models of these linkages for the most part, with modest (approximately <15°) differences in the mean values ofϕ'andψ', although the envelope of allowed angles (encoded in circular standard deviations or CSDs) is consistently larger forϕ'determined fromMA'ATanalysis than from MD for both linkages. TheMA'ATmodel of the α‐Galp‐(1→3)‐β‐Galplinkage agrees well with those determined previously using conventional NMR methods ( 3 J COCH values and/or 1 H‐ 1 H NOEs), but some discrepancy was observed for the β‐Galp‐(1→3)‐β‐Galplinkage, which may arise from errors in the conventions used to describe the linkage torsion angles. Statistical analyses of X‐ray crystal structures show ranges ofϕ'andψ'for both linkages that include the mean angles determined fromMA'ATanalyses, although both angles adopt a wide range of values in the crystalline state, withϕ'in β‐Galp‐(1→3)‐β‐Galplinkages showing greater‐than‐expected conformational variability.
Chemistry↗
Comparison of forward and inverse cam generation methods for the design of cam-linkage mechanisms
This paper presents a comparison between the forward and inverse cam generation methods applied to the design of a multi-lobed cam-rocker slider mechanism for function generation. In the forward method, the cam profile is specified directly and then the linkage output is determined using kinematics. In the inverse method, the trajectory of the output link is specified first and then the cam profile is determined using inverse linkage kinematics. First, the cam-linkage mechanism is introduced, and relevant kinematic equations are presented. Then, the cam generation methods are thoroughly explained. Here, the two cam generation methods are applied to a case study of a hydraulic motor using a multi-lobed cam and multiple linkage mechanisms. While the forward method has direct control of the cam shape, the inverse method has direct control of the linkage output and offers an advantage in calculation speed. For the mechanism selected, the cam designed with the inverse method achieved a reduction of at least 50.97% in the torque ripple when compared to the cam designed with the forward method.
42 ENGINEERING↗
Three Degree of Freedom Parallel Mechanical Linkage
A three degree of freedom parallel mechanism or linkage that couples three degree of freedom translational displacements at an endpoint, such as a handle, a hand grip, or a robot tool, to link rotations about three axes that are fixed with respect to a common base or ground link. The mechanism includes a three degree of freedom spherical linkage formed of two closed loops, and a planar linkage connected to the endpoint. The closed loops are rotatably interconnected, and made of eight rigid links connected by a plurality of single degree of freedom revolute joints. Three of these revolute joints are base joints and are connected to a common ground. such that the axis lines passing through the revolute joints intersect at a common fixed center point K forming the center of a spherical work volume in which the endpoint is capable of moving. 'Me three degrees of freedom correspond to the spatial displacement of the endpoint, for instance. The mechanism provides a new overall spatial kinematic linkage composed of a minimal number of rigid links and rotary joints. The mechanism has improved mechanical stiffness, and conveys mechanical power bidirectionally between the human operator and the electromechanical actuators. It does not require gears, belts. cable, screw or other types of transmission elements, and is useful in applications requiring full backdrivability. Thus, this invention can serve as the mechanical linkage for actively powered devices such as compliant robotic manipulators and force-reflecting hand controllers, and passive devices such as manual input devices for computers and other systems.
Adelstein, Bernard D.↗
Advances in Cell Wall Matrix Research with a Focus on Mixed-Linkage Glucan
Mixed β(1,3;1,4)-linkage glucan (MLG) is commonly found in the monocot lineage, at particularly high levels in the Poaceae family, but also in the evolutionally distant genus, Equisetum. MLG has several properties that make it unique from other plant cell wall polysaccharides. It consists of β1,4-linked polymers of glucose interspersed with β1,3-linkages, but the presence of β1,3-linkages provides quite different physical properties compared to its closest form of the cell wall component, cellulose. The mechanisms of MLG biosynthesis have been investigated to understand whether single or multiple enzymes are required to build mixed linkages in the glucan chain. Currently, MLG synthesis by a single enzyme is supported by mutagenesis analyses of cellulose synthase-like F6, the major MLG synthase, but further investigation is needed to gather mechanistic insights. Because of transient accumulation of MLG in elongating cells and vegetative tissues, several hypotheses have been proposed to explain the role of MLG in the plant cell wall. Studies have been carried out to identify gene expression regulators during development and light cycles as well as enzymes involved in MLG organization in the cell wall. A role of MLG as a storage molecule in grains is evident, but the role of MLG in vegetative tissues is still not well understood. Characterization of a cell wall component is difficult due to the complex heterogeneity of the plant cell wall. Furthermore, as detailed in this review, recent exciting research has made significant impacts in the understanding of MLG biology in plants.
Transglucosylase/hydrolase (XTH)↗
Understanding Trigger Linkage Dynamics in Energetic Materials Using Mixed Picramide Nitrate Ester Explosives
The ability to predict the handling sensitivity of new organic energetic materials has been a longstanding goal. We report the synthesis and characterization of six new nitropicramide energetic materials with mixed functional groups that mimic known explosives such as nitroglycerin, erythritol tetranitrate (ETN), and pentaerythritol tetranitrate (PETN). The molecules have been studied theoretically using quantum molecular dynamics (QMD) simulations and density functional theory (DFT) calculations to identify the weakest bond in the reactants - the trigger-linkages - which control handling sensitivity, and to quantify their specific enthalpies of explosion. In good accord with the drop weight impact sensitivity data, our calculations predict that the sensitivities of the molecules are very similar owing to the small variations of the energy output and rates of trigger linkage rupture. In addition, both the QMD and DFT calculations point to the nitropicramide N–NO 2 bonds as the trigger linkages rather than the more typical O–NO 2 bonds. We propose that the switch of the trigger linkage from the nitrate esters to the nitramine groups arises from the strongly electron withdrawing character of the adjacent trinitrobenzene groups.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Covalent Organic Frameworks with Irreversible Linkages via Reductive Cyclization of Imines
Covalent organic frameworks (COFs) show great potential for many advanced applications on account of their structural uniqueness. To address the synthetic challenges, facile chemical routes to engineer the porosity, crystallinity, and functionality of COFs are highly sought after. Herein, we report a synthetic approach that employs the Cadogan reaction to introduce nitrogen-containing heterocycles as the linkages in the framework. Irreversible indazole and benzimidazolylidene (BIY) linkages are introduced into COFs for the first time via phosphine-induced reductive cyclization of the common imine linkages following either stepwise or one-pot reaction protocols. Further, the successful linkage transformation introduces new functionalities, as demonstrated in the case of BIY-COF, which displays excellent intrinsic proton conductivity without the need of impregnation with external proton transfer reagents. Such a general strategy will open the window to a broader class of functional porous crystalline materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanism of mixed-linkage glucan biosynthesis by barley cellulose synthase–like CslF6 (1,3;1,4)-β-glucan synthase
Mixed-linkage (1,3;1,4)-β-glucans, which are widely distributed in cell walls of the grasses, are linear glucose polymers containing predominantly (1,4)-β-linked glucosyl units interspersed with single (1,3)-β-linked glucosyl units. Their distribution in cereal grains and unique structures are important determinants of dietary fibers that are beneficial to human health. We demonstrate that the barley cellulose synthase-like CslF6 enzyme is sufficient to synthesize a high–molecular weight (1,3;1,4)-β-glucan in vitro. Biochemical and cryo–electron microscopy analyses suggest that CslF6 functions as a monomer. A conserved “switch motif” at the entrance of the enzyme’s transmembrane channel is critical to generate (1,3)-linkages. There, a single-point mutation markedly reduces (1,3)-linkage formation, resulting in the synthesis of cellulosic polysaccharides. Our results suggest that CslF6 monitors the orientation of the nascent polysaccharide’s second or third glucosyl unit. Register-dependent interactions with these glucosyl residues reposition the polymer’s terminal glucosyl unit to form either a (1,3)- or (1,4)-β-linkage.
59 BASIC BIOLOGICAL SCIENCES↗
Solving Stochastic Inverse Problems for Property–Structure Linkages Using Data-Consistent Inversion and Machine Learning
Determining process–structure–property linkages is one of the key objectives in material science, and uncertainty quantification plays a critical role in understanding both process–structure and structure–property linkages. In this work, we seek to learn a distribution of microstructure parameters that are consistent in the sense that the forward propagation of this distribution through a crystal plasticity finite element model matches a target distribution on materials properties. This stochastic inversion formulation infers a distribution of acceptable/consistent microstructures, as opposed to a deterministic solution, which expands the range of feasible designs in a probabilistic manner. Furthermore, to solve this stochastic inverse problem, we employ a recently developed uncertainty quantification framework based on push-forward probability measures, which combines techniques from measure theory and Bayes’ rule to define a unique and numerically stable solution. This approach requires making an initial prediction using an initial guess for the distribution on model inputs and solving a stochastic forward problem. To reduce the computational burden in solving both stochastic forward and stochastic inverse problems, we combine this approach with a machine learning Bayesian regression model based on Gaussian processes and demonstrate the proposed methodology on two representative case studies in structure–property linkages.
36 MATERIALS SCIENCE↗
Toward evaluating the effect of technology choices on linkages between sustainable development goals
Linkages between the Sustainable Development Goals (SDGs) have sparked research interest because a better understanding of SDG co-benefits may enable faster progress on multiple sustainability fronts. However, SDG linkages are typically analyzed without considering the technologies used to implement a primary SDG, which may have secondary effects on other SDGs. Here, we outline an approach to study this problem by connecting the industries and services required to produce a technology to the United Nations SDG indicator framework, using SDG7 and four energy technologies as an illustrative case. We find that all technologies in our set involve potential co-benefits with SDGs 1, 8–10, 12–13, and 17, and trade-offs with SDGs 6, 8–9, 11–12, and 14–15. Deployment services primarily induce co-benefits; manufacturing has mixed impacts. Our work sheds light on the technology characteristics (e.g., scale, high- or low-tech) that influence linkages while also pointing to SDG-relevant characteristics not captured by UN indicators.
29 ENERGY PLANNING, POLICY, AND ECONOMY↗