Low energy activation analysis for geochemical exploration
Low energy activation analysis for geochemical exploration
Ferguson, G. A.↗
SEARCH · Search NASA
Results for “low activation energy”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
K 3 SbS 4 as a Potassium Superionic Conductor with Low Activation Energy for K–S Batteries
Abstract Solid‐state K‐ion conducting electrolytes are key elements to address the current problems in K secondary batteries. Here, we report a sulfide‐based K‐ion conductor K 3 SbS 4 with a low‐activation energy of 0.27 eV. W‐doped K 3− x Sb 1− x W x S 4 ( x =0.04, 0.06, 0.08, 0.10 and 0.12) compounds were also explored for increasing vacancy concentrations and improving ionic conductivity. Among them, K 2.92 Sb 0.92 W 0.08 S 4 exhibits the highest conductivity of 1.4×10 −4 S cm −1 at 40 °C, which is among the best reported potassium‐ion conductors at ambient temperature. In addition, K 2.92 Sb 0.92 W 0.08 S 4 is electrochemically stable with long‐chained potassium polysulfide of K 2 S x . A room‐temperature solid potassium–sulfur (K−S) battery system has therefore been successfully demonstrated, which is the first K−S battery prototype using non‐commercial inorganic‐based electrolyte to block the polysulfide shuttle.
Shao, Jieren↗
K 3 SbS 4 as a Potassium Superionic Conductor with Low Activation Energy for K–S Batteries
Abstract Solid‐state K‐ion conducting electrolytes are key elements to address the current problems in K secondary batteries. Here, we report a sulfide‐based K‐ion conductor K 3 SbS 4 with a low‐activation energy of 0.27 eV. W‐doped K 3− x Sb 1− x W x S 4 ( x =0.04, 0.06, 0.08, 0.10 and 0.12) compounds were also explored for increasing vacancy concentrations and improving ionic conductivity. Among them, K 2.92 Sb 0.92 W 0.08 S 4 exhibits the highest conductivity of 1.4×10 −4 S cm −1 at 40 °C, which is among the best reported potassium‐ion conductors at ambient temperature. In addition, K 2.92 Sb 0.92 W 0.08 S 4 is electrochemically stable with long‐chained potassium polysulfide of K 2 S x . A room‐temperature solid potassium–sulfur (K−S) battery system has therefore been successfully demonstrated, which is the first K−S battery prototype using non‐commercial inorganic‐based electrolyte to block the polysulfide shuttle.
25 ENERGY STORAGE↗
Heavily Tungsten–Doped Sodium Thioantimonate Solid–State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion
A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. Here, the 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Heavily Tungsten-Doped Sodium Thioantimonate Solid-State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion
A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. The 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Here, calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .
sodium metal battery (SMB)↗
Abnormally Low Activation Energy in Cubic Na3SbS4 Superionic Conductor
Inorganic Na-ion superionic conductors play a vital role in all-solid-state Na batteries that operate at room temperature. Sodium thioantimonate (Na3SbS4), a popular sulfide-based solid electrolyte, has attracted serious attention due to its advantages of high ionic conductivity at room temperature and impressive chemical stability under ambient conditions. Much research detailing Na3SbS4 focused on its synthetic approaches and interfacial stability against Na metal, yet, there is limited information elucidating a fundamental understanding of the Na- ion diffusion mechanisms in Na3SbS4 with different crystal structures (e.g., tetragonal and cubic). Herein, we combine real-time electrochemical impedance measurements with theoretical simulations based on density functional theory and in situ quasi-elastic neutron scattering to study the Na-ion conductive properties of Na3SbS4 during its phase transition from a tetragonal to cubic structure. Although there is a slight change in the lattice parameters, the energy barrier for Na-ion diffusion in the tetragonal structure was determined to be much larger (5-10 times) than that in the cubic structure from both theoretical and experimental perspectives. The high degree of symmetry in cubic Na3SbS4 leads to less interatomic correlations between Na and S(Sb) atoms, a shorter jump distance (2.85 angstrom), and a larger diffusion coefficient. This research provides insight into understanding the Na-ion diffusion in solid electrolytes with phase transitions and provides fundamental guidance for designing novel solid-state Na-ion conductors.
Zhang, Qian↗
Anomalously low activation energy of nanoconfined MgCO 3 precipitation
In this work, magnesite (MgCO 3 ) precipitation within the nanoconfined space of adsorbed H 2 O films (~5 monolayers) was determined to have an apparent activation energy of only 36 ± 6 kJ mol –1 , suggesting that Mg 2+ under nanoconfinement adopts a hydration configuration that mimics that of aqueous Ca 2+ , at least energetically, if not also specifically in hydration structure.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Revealing the Structural Stability and Na-Ion Mobility of 3D Superionic Conductor Na 3 SbS 4 at Extremely Low Temperatures
All-solid-state batteries that employ superionic solid conductor potentially enable the broadening of battery operation in harsh environments, such as under subzero temperatures and even lower. The solid electrolyte as the key component requires structural stability, high-efficiency of ion transportation channels, and low activation energy to maintain the fast-ionic conduction against temperature drop. Herein, we use 3D superionic conductor Na 3 SbS 4 as a model to investigate the structure and conductive mechanism at extremely low temperature. Cryogenic in situ neutron and X-ray diffractions reveal that Na 3 SbS 4 maintains a stable tetragonal crystal structure and the anisotropic lattice contraction upon cooling. The dimensions of the S-gate (represented by the S–S pair length) that Na ions hop through in the 3D transportation network is found to maintain open sizes in the xy -plane, contributing to the low activation energy and impressive ionic conductivity. The Na-ion transportation network is demonstrated to be directionally accessible at the extremely low temperature, which reveals the ion conductive mechanism at broadened temperature range in the view of structure. Furthermore, these findings provide valuable guidance in the search for materials as promising solid electrolyte in solid-state batteries to fulfill harsh environmental needs.
36 MATERIALS SCIENCE↗
Highly Efficient Proton Conduction in the Metal–Organic Framework Material MFM-300(Cr)·SO 4 (H 3 O) 2
The development of materials showing rapid proton conduction with a low activation energy and stable performance over a wide temperature range is an important and challenging line of research. Here, we report confinement of sulfuric acid within porous MFM-300(Cr) to give MFM-300(Cr)·SO 4 (H 3 O) 2 , which exhibits a record-low activation energy of 0.04 eV, resulting in stable proton conductivity between 25 and 80 °C of >10 –2 S cm –1 . In situ synchrotron X-ray powder diffraction (SXPD), neutron powder diffraction (NPD), quasielastic neutron scattering (QENS), and molecular dynamics (MD) simulation reveal the pathways of proton transport and the molecular mechanism of proton diffusion within the pores. Confined sulfuric acid species together with adsorbed water molecules play a critical role in promoting the proton transfer through this robust network to afford a material in which proton conductivity is almost temperature-independent.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Rational Design of a Ni 3 N 0.85 Electrocatalyst to Accelerate Polysulfide Conversion in Lithium–Sulfur Batteries
Slow kinetics of polysulfide conversion reactions lead to severe issues for lithium–sulfur (Li–S) batteries, for example, low rate capability, polysulfide migration, and low Coulombic efficiencies. These challenges hinder the practical applications of Li–S batteries. Here, we proposed a rational strategy of tuning the d-band of catalysts to accelerate the conversion of polysulfides. Nitrogen vacancies were engineered in hexagonal Ni 3 N (space group P 6 3 22) to tune its d-band center, leading to the strong interaction between polysulfides and Ni 3 N. Because of the greater electron population in the lowest occupied molecular orbital of Li 2 S 4 , the terminal S–S bonds were weakened for breaking. Temperature-dependent experiments confirm that Ni 3 N 0.85 demonstrates a much low activation energy, thereby accelerating the conversion of polysulfides. A Li–S cell using Ni 3 N 0.85 can deliver a high initial discharge capacity of 1445.9 mAh g –1 (at 0.02 C) and low decay per cycle (0.039%). The Ni 3 N 0.85 cell can also demonstrate an initial capacity of 1200.4 mAh g –1 for up to 100 cycles at a high loading of 5.2 mg cm –2 . The high efficiency of rationally designed Ni 3 N 0.85 demonstrates the effectiveness of the d-band tuning strategy to develop low-activation-energy catalysts and to promote the atomic understanding of polysulfide conversion in Li–S batteries.
25 ENERGY STORAGE↗
Multi-mechanistic Strategies for Novel Solid Electrolytes with Superior Properties
Despite a wide range of solid electrolyte phases, most of them only exist at high temperatures. The challenge is to tailor the chemical compositions of solid electrolyte materials that yield high ionic conductivities and low activation energies at ambient temperature. This is crucial for the development of all-solid-state batteries that are both powerful and safe. Here, we report our recent works to meet this challenge by utilizing multiple mechanistic principles and clusters as the building blocks. We show that the atomic-level interactions that govern the fast-ion conduction can be optimized by incorporating polyanion dynamics, non-stoichiometry, point defects and strong ionic correlations. Specifically, two case studies of Li/Na solid electrolytes will be covered, including lithium solid electrolytes (SE) with record-high ionic conductivities at room temperature (over 100 mS/cm) and sodium SE with record-low activation energies (< 0.1 eV).
Fang, Hong↗
Mapping Current Collection in Cross Section: The Case of Copper-Doped CdTe Solar Cells
For decades, copper has been used to improve the performance of cadmium telluride thin film solar cells. However, it has also been shown to be the main cause of metastability in CdTe. Recently a low activation energy has been reported for the thermal diffusion of Cu in CdTe explaining the ease of motion that it has under moderate temperatures. The community consensus is that copper segregates to the absorber grain boundaries, where it's either beneficial or detrimental to device performance depending on its concentration. Using nanoscale X-ray micrsocopy and a two-dimensional drift-diffusion model we present a preliminary correlation between local copper distribution and electrical performance of a single-junction CdTe/CdS solar cell.
CdTe↗
Tuning the Mobility of Indacenodithiophene-Based Conjugated Polymers via Coplanar Backbone Engineering
Conjugated polymers based on indacenodithiophene-benzothiadiazole (IDT-BT) have attracted great interest due to their high charge carrier mobilities while being low crystallinity (i.e. near-amorphous.) They represent a promising design strategy to achieve both excellent stretchability and electrical performance. Here, we describe an approach on structural modifications of IDT-BT, namely by introducing non-covalent interactions and substituting building blocks to promote extended coplanar backbones. We systematically investigated the effects of structural modifications on backbone conformation, polymer aggregations, and charge carrier mobilities. Among the investigated polymers, the fluorinated derivative IDT-FBT demonstrated the highest charge carrier mobility of 5.19 cm 2 /Vs, along with low activation energy and Urbach energy indicating its low energy disorder level. The high mobility was attributed to the higher backbone planarity reinforced by S···F and H···F non-covalent interactions and improved interchain interactions through strong aggregation. In conclusion, our findings indicate that increasing backbone coplanarity may further improve mobility in low crystallinity conjugated polymers.
36 MATERIALS SCIENCE↗
Sodium Superionic Conductors Based on Clusters
Owing to the high abundance and low cost of sodium (Na), Na-based rechargeable batteries hold great potential for large-scale applications in the future energy industry. However, as key component of the battery electrolyte, only a few Na-based superionic conductors can reach the ionic conductivity comparable to that of liquid or gel electrolytes. Here, we provide a guideline for the development of cluster-based Na-rich antiperovskite superionic conductors using computational studies. With a selected cluster ion BCl 4 – , we are able to achieve high-room-temperature Na-ionic conductivity over 10 –3 S/cm and low activation energies below 0.2 eV in the antiperovskite crystals Na 3 S(BCl 4 ) and Na 3 S(BCl 4 ) 0.5 I 0.5 . In addition, these materials have large bandgaps and favorable mechanical properties. Here, a comprehensive study of the stability and formation energy of these materials further illustrates possible routes for their synthesis. New insights into the conduction mechanism of these cluster-based superionic conductors are provided, including the cooperative motion of Na ions and the significant reduction of the migration barrier due to the changing orientation of the cluster ion.
25 ENERGY STORAGE↗
Re-Examination of the N 2 O + O Reaction
The reaction of N 2 O with O is a key step in consumption of nitrous oxide in thermal processes. It has two product channels, NO + NO (R2) and N 2 + O 2 (R3). The rate constant for R2 has been measured both in the forward and the reverse direction at elevated temperature and is well established. However, the rate constant for the N 2 + O 2 channel (R3) has been difficult to quantify and has significant error limits. Here, the direct reaction on the triplet surface has a barrier of around 40 kcal mol –1 , and it is too slow for the N 2 + O 2 channel to have any practical significance. Recently, Pham and Lin (2022) suggested an alternative low activation energy reaction path that involves intersystem crossing and reaction on the singlet surface. In the present work, we re-examined a wide range of experiments relevant for the N 2 O + O reaction through kinetic modeling, paying attention to the impact of artifacts such as impurities and surface reactions. Experimental results from shock tubes and batch reactors on the final NO yield in N 2 O decomposition, covering temperatures of 973–2200 K and pressures of 0.013–11.5 atm, support k 3 ~ 0, consistent with the high activation energy for reaction on the triplet surface and a low probability of ISC.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Lowering the Activation Barriers for Lithium-Ion Conductivity through Orientational Disorder in the Cyanide Argyrodite Li6PS5CN
Rapid advancements in safe and high-energy-density energy storage are predicated on identifying new solid-state ion conductors with low activation energies and high ionic conductivities for all-solid-state battery technologies. Halide argyrodites are among some of the top candidates for solid-state electrolytes, as they can achieve ionic conductivities that approach liquid electrolytes. Incorporating dynamic pseudohalide species in argyrodite solid electrolytes presents an exciting opportunity to exploit lattice dynamics as a design principle to modulate the ion conduction properties of solid-state ion conductors. In the present study, we have prepared the new argyrodite Li 6 PS 5 CN containing orientationally disordered cyanide ions. The new cyanide argyrodite Li 6 PS 5 CN exhibits an activation barrier to Li-ion transport of 471 ± 25 meV and a room-temperature ionic conductivity of 6(2) × 10 –5 S cm –1 in comparison to the activation barrier of 502 ± 16 meV and an ionic conductivity of 2.3(1) × 10 –4 S cm –1 measured for the bromide analogue Li 6 PS 5 Br. Structural studies of both compounds by high-resolution X-ray diffraction indicate that Li 6 PS 5 CN and Li 6 PS 5 Br adopt nearly identical crystal structures with similar lattice parameters, which indicates that lower activation barriers in Li 6 PS 5 CN arise due to the cyanide ion itself rather than due to changes in the geometry of conduction pathways in the local lithium environment. The orientational disorder of the quadrupolar cyanide ion in Li 6 PS 5 CN points to a complex interplay of lattice polarizability and molecular dynamics that lower the activation barrier for lithium-ion conductivity in the cyanide argyrodite.
25 ENERGY STORAGE↗
A fundamental look at electrocatalytic sulfur reduction reaction
The fundamental kinetics of the electrocatalytic sulfur reduction reaction (SRR), a complex 16-electron conversion process in lithium–sulfur batteries, is so far insufficiently explored. In this study, by directly profiling the activation energies in the multistep SRR, we reveal that the initial reduction of sulfur to the soluble polysulfides is relatively easy owing to the low activation energy, whereas the subsequent conversion of the polysulfides into the insoluble Li 2 S 2 /Li 2 S has a much higher activation energy, contributing to the accumulation of polysulfides and exacerbating the polysulfide shuttling effect. We use heteroatom-doped graphene as a model system to explore electrocatalytic SRR. We show that nitrogen and sulfur dual-doped graphene considerably reduces the activation energy to improve SRR kinetics. Density functional calculations confirm that the doping tunes the p-band centre of the active carbons for an optimal adsorption strength of intermediates and electroactivity. This study establishes electrocatalysis as a promising pathway to tackle the fundamental challenges facing lithium–sulfur batteries.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Gold Nanoparticle Mesoporous Carbon Composite as Catalyst for Hydrogen Evolution Reaction
Increased environmental pollution and the shortage of the current fossil fuel energy supply has increased the demand for eco-friendly energy sources. Hydrogen energy has become a potential solution due to its availability and green combustion byproduct. Hydrogen feedstock materials like sodium borohydride (NaBH 4 ) are promising sources of hydrogen; however, the rate at which the hydrogen is released during its reaction with water is slow and requires a stable catalyst. In this study, gold nanoparticles were deposited onto mesoporous carbon to form a nano-composite catalyst (AuNP-MCM), which was then characterized via transmission electron microscopy (TEM), powder X-ray diffraction (P-XRD), and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). The composite’s catalytic ability in a hydrogen evolution reaction was tested under varying conditions, including NaBH 4 concentration, pH, and temperature, and it showed an activation of energy of 30.0 kJ mol -1 . It was determined that the optimal reaction conditions include high NaBH 4 concentrations, lower pH, and higher temperatures. This catalyst, with its stability and competitively low activation energy, makes it a promising material for hydrogen generation.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗