Emittance and energy spread compensation for current and future low emittance synchrotron light sources
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Search NASA
Results for “low emittance”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ultra low emittance electron beams from multi-alkali antimonide photocathode operated with infrared light
The intrinsic emittance of electron beams generated from a multi-alkali photocathode operated in a high voltage DC gun is reported. The photocathode showed sensitivity extending to the infrared part of the spectrum up to 830 nm. The measured intrinsic emittances of electron beams generated with light having wavelength longer than 800 nm are approaching the limit imposed by the thermal energy of electrons at room temperature with quantum efficiencies comparable to metallic photocathodes used in operation of modern photoinjectors.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Evidence for high-energy and low-emittance electron beams using ionization injection of charge in a plasma wakefield accelerator
Explore the source record for details and available documents.
Vafaei-Najafabadi, N.↗
Low emittance growth in a low energy beam transport line with un-neutralized section
Not Available
43 PARTICLE ACCELERATORS↗
Ultra-low Emittance Photocathodes for Accelerators and Femtosecond Electron Diffraction
To advance low emittance photocathodes suitable for accelerators and ultrafast electron diffraction the following directions have been investigated: 1) growth and characterization of alkali photocathodes in the new regime where their intrinsic emittance is limited by the material lattice temperature; 2) extending Monte Carlo electron transport modeling in photocathodes to cryogenic temperatures; 3) numerical simulations of sharp photo-emitting tips that enhance the electric field available; and 4) exploration of new protective coatings on III-V semiconductor photocathodes as robust high efficiency low-emittance sources of electrons. The key results achieved in these four areas as enabled by this grant are highlighted in this final technical report.
42 ENGINEERING↗
Design study of a low emittance complex bend achromat lattice
Light sources worldwide have experienced rapid growth in the last decades, pushing toward higher brightness with lower emittance to meet growing demands from the user community. The quest for higher brightness motivates the development of low-emittance ring lattices. At this point, all fourth-generation storage ring light sources employ variations of the multibend achromat (MBA) lattice. In this paper, we discuss an extension of this approach, known as complex bend achromat lattice in relation to the future NSLS-II upgrade. A detailed approach for the lattice design will be described and the developed lattice will be presented. The advantages of using our complex bend approach are evident in reaching a natural emittance as low as 23 pm at a beam energy of 3 GeV, providing a straight section of 8.4 m for long insertion devices, and acquiring a ratio of about 50% of free space with respect to the ring circumference. The design includes the use of permanent magnets largely reducing the need for power supplies. Our new approach provides an extension to the MBA concept for the next-generation light source lattice design. Published by the American Physical Society 2024
36 MATERIALS SCIENCE↗
A spatial beam property analyzer based on dispersive crystal diffraction for low-emittance X-ray light sources
Abstract The advent of low-emittance synchrotron X-ray sources and free-electron lasers urges the development of novel diagnostic techniques for measuring and monitoring the spatial source properties, especially the source sizes. This work introduces an X-ray beam property analyzer based on a multi-crystal diffraction geometry, including a crystal-based monochromator and a Laue crystal in a dispersive setting to the monochromator. By measuring the flat beam and the transmitted beam profiles, the system can provide a simultaneous high-sensitivity characterization of the source size, divergence, position, and angle in the diffraction plane of the multi-crystal system. Detailed theoretical modeling predicts the system’s feasibility as a versatile characterization tool for monitoring the X-ray source and beam properties. The experimental validation was conducted at a bending magnet beamline at the Swiss Light Source by varying the machine parameters. A measurement sensitivity of less than 10% of a source size of around 12 µm is demonstrated. The proposed system offers a compact setup with simple X-ray optics and can also be utilized for monitoring the electron source.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
On possibility of low-emittance high-energy muon source based on plasma wakefield acceleration
We report plasma wakefield acceleration (PWA) channels are characterized by very high accelerating gradients and very strong focusing fields. We propose to employ these properties for effective production of low emittance high energy muon beams, consider muon beam dynamics in the PWFA cell and analyze various options and potential of the PWA-based muon sources.
43 PARTICLE ACCELERATORS↗
Study of ultra-low emittance design for Spear3 using longitudinal gradient dipole
Since its 2003 construction, the SPEAR3 synchrotron light source at SLAC has continuously improved its performance by raising beam current, top-off injection, and smaller emittance. This makes SPEAR3 one of the most productive light sources in the world. Now to further enhance the performance of SPEAR3, we are looking into the possibility of converting SPEAR3 to an ultra-low emittance storage ring within its site constraint.
43 PARTICLE ACCELERATORS↗
Study of ultra-low emittance design for SPEAR3
Since its 2003 construction, the SPEAR3 synchrotron light source at SLAC has continuously improved its performance by raising beam current, top-off injection, and smaller emittance. This makes SPEAR3 one of the most productive light sources in the world. Now, to further enhance the performance of SPEAR3, we are looking into the possibility of converting SPEAR3 to an ultra-low emittance storage ring within its site constraint.
43 PARTICLE ACCELERATORS↗
Characterizing and Optimizing Photocathode Laser Distributions for Ultra-low Emittance Electron Beam Operations
Photocathode RF gun has been widely used for generation of high-brightness electron beams for many different applications. We found that the drive laser distributions in such RF guns play important roles in minimizing the electron beam emittance. Characterizing the laser distributions with measurable parameters and optimizing beam emittance versus the laser distribution parameters in both spatial and temporal directions are highly desired for high-brightness electron beam operation. In this paper, we report systematic measurements and simulations of emittance dependence on the measurable parameters represented for spatial and temporal laser distributions at the photocathode RF gun systems of Linac Coherent Light Source. The tolerable parameter ranges for photocathode drive laser distributions in both directions are presented for ultra-low emittance beam operations.
ACCPHY↗
Source size measurement options for low-emittance light sources
Radiation-based techniques for measuring electron source sizes are widely used as emittance diagnostics at existing synchrotron sources. Three of these techniques, namely, pinhole imaging, double-slit interferometry, and a K-edge filter-based beam position and size monitor system (ps-BPM), are evaluated for measuring source sizes at low-emittance storage rings. Each technique is reviewed with a detailed system description, design optimization, and practical considerations targeted for small source sizes. Pinhole imaging has the simplest setup and gives the beam profile in both transverse dimensions but with limited resolution. Double-slit interferometry has the highest resolution but with a limited detectable size range. The ps-BPM system shows reasonable resolution for monitoring small source sizes and divergence and can give real-time information of the source position and angle. New facilities may consider an integrated system that combines some or all of these techniques.
43 PARTICLE ACCELERATORS↗
A kiloelectron-volt ultrafast electron micro-diffraction apparatus using low emittance semiconductor photocathodes
We report the design and performance of a time-resolved electron diffraction apparatus capable of producing intense bunches with simultaneously single digit micrometer probe size, long coherence length, and 200 fs rms time resolution. We measure the 5d (peak) beam brightness at the sample location in micro-diffraction mode to be 7×1013 A/m2 rad2. To generate high brightness electron bunches, the system employs high efficiency, low emittance semiconductor photocathodes driven with a wavelength near the photoemission threshold at a repetition rate up to 250 kHz. We characterize spatial, temporal, and reciprocal space resolution of the apparatus. We perform proof-of-principle measurements of ultrafast heating in single crystal Au samples and compare experimental results with simulations that account for the effects of multiple scattering.
43 PARTICLE ACCELERATORS↗
Instrumentation for the study of low emittance tuning and beam dynamics at CESR
The Cornell Electron-positron Storage Ring (CESR) has been converted from a High Energy Physics electron-positron collider to operate as a dedicated synchrotron light source for the Cornell High Energy Synchrotron Source (CHESS) and to conduct accelerator physics research as a test accelerator, capable of studying topics relevant to future damping rings, colliders and light sources. Some of the specific topics that were targeted for the initial phase of operation of the storage ring in this mode for CESR as a Test Accelerator (CesrTA) included 1) tuning techniques to produce low emittance beams, 2) the study of electron cloud development in a storage ring and 3) intra-beam scattering effects. The complete conversion of CESR to CesrTA occurred over a several year period, described elsewhere [1–3]. In addition to instrumentation for the storage ring, which was created for CesrTA, existing instrumentation was modified to facilitate the entire range of investigations to support these studies. Procedures were developed, often requiring coordinated measurements among different instruments [4]. This paper describes the instruments utilized for the study of beam dynamics during the operation of CesrTA. The treatment of these instruments will remain fairly general in this paper as it focuses on an overview of the instruments themselves. Their interaction and inter-relationships during sequences of observations is found in a companion paper describing the associated measurement techniques. Lastly, more detailed descriptions and detailed operational performance for some of the instrumentation may be found elsewhere and these will be referenced in the related sections of this paper.
43 PARTICLE ACCELERATORS↗
Low Emittance Growth in a LEBT with Un-Neutralized Section
In a Low Energy Beam Transport line (LEBT), the emittance growth due to the beam's own space charge is typically suppressed by way of neutralization from either electrons or ions, which originate from ionization of the background gas. In cases where the beam is chopped, the neutralization pattern changes throughout the beginning of the pulse, causing the Twiss parameters to differ significantly from their steady state values, which, in turn, may result in beam losses downstream. For a modest beam perveance, there is an alternative solution, in which the beam is kept un-neutralized in the portion of the LEBT that contains the chopper. The emittance can be nearly preserved if the transition to the un-neutralized section occurs where the beam exhibits low transverse tails. This report discusses the experimental realization of such a scheme at Fermilab's PXIE, where low beam emittance dilution was demonstrated
43 PARTICLE ACCELERATORS↗
Numerical optimization of a low emittance lattice cell
In the lattice designs for the next generation storage ring light sources, longitudinal gradient bending magnets and anti-bending magnets have been adopted. A logical question raised by the trend of varying the longitudinal distribution of dipole strength is: what are the optimal distributions of the dipole and quadrupole fields in a lattice cell for the purpose of minimizing the natural emittance? We studied this problem by numerically optimizing the dipole and quadrupole distributions of the normalized cell optics using the particle swarm optimization algorithm. Furthermore the results reveal the features of the longitudinal field variation of the optimized cell and show that when the quadrupole gradient is increased enough, the cell tends to split into two identical cells with similar features.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Spatio-Temporal Shaping of the Photocathode Laser Pulse for Low-Emittance Shaped Electron Bunches
Photocathode laser shaping techniques to generate temporally shaped electron bunches are appealing owing to their simplicity. Such technique is being considered to form shaped electron bunches to enhance the transformer ratio in beam-driven accelerators. At low energy (i.e. during the emission process) the transverse and longitudinal space charge effects are coupled so that attaining a low beam transverse emittance require the laser to be spatiotemporal shaped. In this paper, we explore the generation of a linearly-ramped bunch with optimized transverse emittance by temporally and radially shaping the laser pulse to provide an adequate initial distribution. We discuss a possible implementation of the optical shaping technique and describe a planned experiment.
43 PARTICLE ACCELERATORS↗
Spectrum-Based Alignment of In-Vacuum Undulators in a Low-Emittance Storage Ring
In-vacuum undulators (IVU) are used extensively at light source facilities, in particular at medium-energy storage rings, where these devices are the main sources of high-brightness hard X-rays. The relatively small vertical magnetic gaps that are used in these planar undulators make them rather sensitive to misalignments of magnet arrays with respect to the electron orbit in the vertical plane. Based on commissioning results of undulator-based hard X-ray beamlines at the National Synchrotron Light Source II (NSLS-II)—a Department of Energy Office of Science User Facility at Brookhaven National Laboratory— IVU misalignment was found to be the most frequent cause of spectral “underperformance.” It is possible, nevertheless, to restore the performance using a spectrum-based IVU alignment procedure described in this article.
47 OTHER INSTRUMENTATION↗