Search NASA⌕ Search

SEARCH · Search NASA

Results for “magnetization distributions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Distributed Magnetic Field and Temperature Monitoring for Superconducting Radio Frequency Cavities

The overall objective of the proposed Phase I program was to design, construct and demonstrate a fiber optic sensing system capable of providing temperature and magnetic field measurements with an enhanced spatial resolution that can be implemented over a large surface area (cryomodules) to survey superconducting radio frequency cavities and magnets. A magnetic field sensor capable of detecting fluxes on the order of 1 μT is required to detect the distribution of trapped flux on the cavity surface. A unique distributed magnetic field sensor was successfully designed and constructed to demonstrate the detection of magnetic fluxes less than 500 nT. The sensor leveraged the ultra-high sensitivity of Sentek’s picoDAS to measure the magnetostriction induced vibrations in a commercially available Metglas 2605 SC ribbon that was in physical contact with sensing fiber. Static magnetic fields were detected by applying an alternating current a copper wire proximate to the Metglas 2605SC ribbon to create an AC bias magnetic field. In an alternative approach, an AC bias magnetic field was applied to a special magnetic field sensing fiber with Metglas 2605SC cladding successfully detect a magnetic field flux of a 3 μT. Exhaustive testing was performed to characterize the dependency of sensor response on the direction of the applied magnetic field. Although the special sensing fiber based magnetic field sensor did not exhibit an observable dependence on the direction of the magnetic field, the Metglas 2605SC ribbon sensor exhibited a clear directional dependence. A wide variety of polymer materials were evaluated to enhance the temperature response of an FBG based sensor at cryogenic temperatures. The processing and performance challenges provided the motivation to develop a new simple cryogenic temperature sensor that uses a commercially available fiber optic splice protector. The EVA hot melt tube that becomes adhered to the optical fiber and the polyolefin outer tube that shrinks upon heating in the fusion splicer heater provide the high thermal expansion coefficient necessary to impart a significant strain on the FBG when exposed to cryogenic temperatures. The temperature sensitivity (Δ𝜆𝐵𝑟𝑎𝑔𝑔~ 62 𝑝𝑝𝑚/℃) of the FBG-based sensor was on par with the best reported to date. The simple design, use of readily available cost-effective materials, and well-established processing techniques lends this approach to the creation of hundreds to thousands of temperature sensors on one single optical fiber length. The inherently small form factor also allows for co-location with the distributed magnetic field sensor. In preparation for field testing of the prototype sensing system at the Jefferson Labs in potential Phase II program, several different cable designs were evaluated to package the sensors. The preliminary successful demonstration of fully functional sensing cables provides the foundation for subsequent development efforts to advance the Technology Readiness Level of the technology. The technical feasibility of the proposed approach was successfully demonstrated in this Phase I effort.

43 PARTICLE ACCELERATORS↗

Magnetic moment distribution of magnetic cataclysmic variables

A simulation study is made of the relative numbers of the AM Herculis binaries and the intermediate polars as a function of the orbital period using random variables subject to suitable constraints to describe the various parameters. It is shown that the observations can be matched by a single distribution in the magnetic moment equals 0.7 +/- 0.3. For such an ensemble, the intermediate polars are distributed in the log(Porb) - log(Ps) diagram about the critical disk line but with a larger scatter than observed.

Wu, Kinwah↗

Magnetization distribution in Cu 0.6 Mn 2.4 Ge 2 ferromagnet from polarized and non-polarized neutron powder diffraction aided by density-functional theory calculations

The crystal structure and magnetic properties of Cu 0.6 Mn 2.4 Ge 2 have been re-investigated by a combination of extensive magnetic measurements and neutron scattering experiments, aided by electronic structure calculations. The material is found to be a soft ferromagnet with the ordering temperature T C = 316 K. The magnetocaloric effect evaluated from field-dependent magnetization isotherms is equal to 1.2 J/(kg·K) and 2.5 J/(kg·K) under the maximum applied magnetic field of 2 T and 5 T, respectively. The compound crystallizes in the hexagonal space group P6 3 /mmc. A complex structural disorder necessitated testing of several disorder models against the results of non-polarized and polarized neutron scattering experiments and magnetization measurements. Simulations at the density-functional theory level were also performed to identify the most robust solution that properly described the data observed. The final magnetic structure model reveals non-equal magnetic moments on the Mn1 and Mn2 atoms (2.29(9) µ B and 2.7(1) µ B , respectively) and the presence of vacancies and minor Cu substitution defects in both Mn sites. The work demonstrates how the non-polarized and polarized neutron scattering methods can be combined with electronic structure calculations to establish the microscopic structure of magnetic materials with complex crystallographic disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distributed magnetic field positioning system using code division multiple access

An apparatus and methods for a magnetic field positioning system use a fundamentally different, and advantageous, signal structure and multiple access method, known as Code Division Multiple Access (CDMA). This signal architecture, when combined with processing methods, leads to advantages over the existing technologies, especially when applied to a system with a large number of magnetic field generators (beacons). Beacons at known positions generate coded magnetic fields, and a magnetic sensor measures a sum field and decomposes it into component fields to determine the sensor position and orientation. The apparatus and methods can have a large `building-sized` coverage area. The system allows for numerous beacons to be distributed throughout an area at a number of different locations. A method to estimate position and attitude, with no prior knowledge, uses dipole fields produced by these beacons in different locations.

Prigge, Eric A.↗

Local measurements of the spatial magnetic field distribution in a z-pinch plasma during and near stagnation using polarization spectroscopy

We present here the detailed measurements of radial distribution of the magnetic field in a gas-puff z-pinch plasma at the final stages of the implosion phase and at stagnation. While the measurements are chordal, the radial distribution of different charge states was utilized to measure the magnetic field locally for certain radii, so that unlike chordal measurements in general, the magnetic field radial distribution was obtained with no need for the Abel inversion of the data. The distribution was measured using the Zeeman effect via a novel spectroscopic technique, at several axial locations, and demonstrates striking features such as the peak field remaining at a radius much larger than the stagnation radius at all times. Furthermore, while the distribution observed is sometimes monotonic with respect to the radius, it is often not, a behavior that can be linked to 2D features in the plasma column resulting from the Rayleigh–Taylor instability. The current flowing through the stagnating plasma was found to be a small fraction of the total current, resulting in clearly insufficient magnetic pressure to balance the plasma pressure at stagnation. The magnetic field data, taken over several axial positions, are used to obtain the true inductance in the imploding plasma for the first time; it is found that the data cannot explain the current turnover at stagnation. A simulation with the MACH2-Tabular Collisional-Radiative Equilibrium magnetohydrodynamics code in the r–z plane shows that the peak of the magnetic field pinches to a much smaller radius than is observed in the spectroscopic data. Furthermore, the depth of the computed current turnover at stagnation is smaller than the measured one. The two observed features of a radially extended magnetic field at stagnation together with a deep current turnover are a challenge to match in simulations. Various calculations and estimates of the inductive and resistive load voltages are examined to ascertain if they are responsible for the observed current notch. Lastly, the results demonstrate that the knowledge of the true inductance in the driven load requires such magnetic-field-distribution measurements and that imaging data or electrical measurements are insufficient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Azimuthal magnetic field distribution in gas-puff Z -pinch implosions with and without external magnetic stabilization

An experimental study of the magnetic field distribution in gas-puff Z pinches with and without a preembedded axial magnetic field (B z0 ) is presented. Spatially resolved, time-gated spectroscopic measurements were made at the Weizmann Institute of Science on a 300 kA, 1.6 μs rise time pulsed-power driver. The radial distribution of the azimuthal magnetic field, B θ , during the implosion, with and without a preembedded axial magnetic field of B z0 = 0.26 T, was measured using Zeeman polarization spectroscopy. The spectroscopic measurements of B θ were consistent with the corresponding values of B θ inferred from current measurements made with a B-dot probe. One-dimensional magnetohydrodynamic simulations, performed with the code TRAC-II, showed agreement with the experimentally measured implosion trajectory, and qualitatively reproduced the experimentally measured radial B θ profiles during the implosion when B z0 = 0.26 T was applied. Simulation results of the radial profile of B θ without a preembedded axial magnetic field did not qualitatively match experimental results due to magneto-Rayleigh-Taylor (MRT) instabilities. Furthermore, our analysis emphasizes the importance of MRT instability mitigation when studying the magnetic field and current distributions in Z pinches. Discrepancies of the simulation results with experiment are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrostatic instabilities of velocity-space-shell distributions in magnetized plasmas

Electron instabilities of magnetized spherical shell distributions in velocity space with a colder Maxwellian background are investigated analytically with simulations using electrostatic particle codes. The resonant and nonresonant instabilities observed in the particle simulations are in agreement with zeros of the dielectric function, as found from the resonant approximations for waves with an electric field component along the magnetic field or by computation with a root solver code in the case of perpendicular propagation. Saturation of the instabilities is by nonlinear cyclotron resonance with the cold background in the resonant case or by nonstochastic cyclotron harmonic damping by the cold background in the nonresonant case. Instabilities invariably lead to perpendicular acceleration and heating of the cold background to velocities sometimes exceeding the shell velocity.

Sentman, D. D.↗

The Latitudinal Distribution of Magnetic Holes in the Solar Wind

%T The Latitudinal Distribution of Magnetic Holes in the Solar Wind%A D. Winterhalter%A M. Neugebauer%A E. J. Smith%A A. Balogh%J American Geophysical Union, 1995 Spring Meeting%C Baltimore, Maryland%D May 29-June 2, 1995%K Interplanetary Magnetic Fields%K Solar Wind%U http://techreports.jpl.nasa.gov/1995/95-0554.pdf!

Interplanetary↗

Magnetic pair distribution function and half polarized neutron powder diffraction at the HB-2A powder diffractometer

Local magnetic order and anisotropy are often central for understanding fundamental behavior and emergent functional properties in quantum materials and beyond. Advances in neutron powder diffraction experiments and analysis tools now allow for quantitative determination. Here, we demonstrate this here with complementary total neutron scattering and polarized neutron measurements on the HB-2A neutron powder diffractometer at the High Flux Isotope Reactor (HFIR). In recent years, magnetic pair distribution function (mPDF) analysis has emerged as a powerful technique for probing local magnetic spin ordering of magnetic materials. This method can be broadly applied to any magnetic material but is particularly effective for studying systems with short-range magnetic order, such as materials with reduced dimensionality, geometrically frustrated magnets, thermoelectrics, multiferroics, and correlated paramagnets. Magnetic anisotropy often underpins the short-range order adopted. Half-polarized neutron powder diffraction (pNPD) can be used to determine the local susceptibility tensor on the magnetic sites to quantify the magnetic anisotropy. Combining the techniques of mPDF and pNPD can therefore provide valuable insights into local magnetic behavior. A series of measurements optimized for these techniques are presented as exemplar cases focused on frustrated materials where short-range order dominates, these include measurements to ultra-low temperature (<100 mK) not typically accessible for such experiments.

Half polarized neutron scattering↗

diffpy.mpdf : open-source software for magnetic pair distribution function analysis

The open-source Python package diffpy.mpdf , part of the DiffPy suite for diffraction and pair distribution function analysis, provides a user-friendly approach for performing magnetic pair distribution function (mPDF) analysis. The package builds on existing libraries in the DiffPy suite to allow users to create models of magnetic structures and calculate corresponding one- and three-dimensional mPDF patterns. diffpy.mpdf can be used to perform fits to mPDF data either in isolation or in combination with atomic pair distribution function data for joint refinement of the atomic and magnetic structure. Examples are given using MnO and MnTe as representative antiferromagnetic compounds and MnSb as a representative ferromagnet.

36 MATERIALS SCIENCE↗

On the spatial distribution of magnetic fields on the solar surface

Recent measurements of solar surface magnetic fields suggest that the spatial distribution of these fields is fractal. In order to understand the physical basis for such geometric complexity, we study here the advection of magnetic flux tubes relatively simple random motions on the surface of a fluid and investigate the spatial statistics of the resulting surface field. While this study does not directly address the question of why solar surface fields have the observed spatial structure, it is designed to build our intuition about how surface flows lead to complex spatial structuring of magnetic fields. As part of our study, we discuss the various methods by which one can describe the spatial distribution of the surface magnetic flux and relate them mathematically; this turns out to be a crucial point of our work since, as we show, a number of previous analyses have misinterpreted the analysis procedures for determining fractal dimensions. Our principal result is the explicit demonstration that simple random flows lead to magnetic flux spatial distributions with a multifractal dimension spectrum. Furthermore, we demonstrate that this magnetic spatial structure is generic, i.e., is characteristic of a very large class of random flows.

Tao, L.↗

Charged particle motion in spherically symmetric distributions of magnetic monopoles

The classical equations of motion of a charged particle in a spherically symmetric distribution of magnetic monopoles can be transformed into a system of linear equations, thereby providing a type of integrability. In the case of a single monopole, the solution was given long ago by Poincaré. In the case of a uniform distribution of monopoles, the solution can be expressed in terms of parabolic cylinder functions (essentially the eigenfunctions of an inverted harmonic oscillator). Further, this solution is relevant to recent studies of nonassociative star products, symplectic lifts of twisted Poisson structures, and fluids and plasmas of electric and magnetic charges.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗