Search NASA⌕ Search

SEARCH · Search NASA

Results for “maneuver analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Maneuver analysis

The maneuver analysis for the Mariner 9 mission, both prelaunch and in-flight, was different from that of previous Mariners because of the requirement to insert the spacecraft into orbit about Mars and to trim the orbit to an unprecedented accuracy. The most apparent differences were in the spacecraft design, the software development, and the maneuver strategy required for each phase of the mission. The analysis that was performed and the software that was developed, with emphasis on the maneuver strategy and actual in-flight results are described.

Mitchell, R. T.↗
NASA NTRS1981

Galileo maneuver analysis

In the maneuver analysis of the Galileo spacecraft, analytic models have been developed to assess the performance of an interplanetary dual spin spacecraft. These models take into account all the important effects of dual spin and flexible body dynamics to determine the spacecraft capability to achieve precise velocity changes for a variety of maneuver modes, as dictated by the requirements and as are tested and verified by computer simulation. Proportional velocity change magnitude accuracies as small as 0.34%, proportional velocity change pointing accuracies as little as 10 milliradians and fixed velocity change accuracies as precise as 0.015 m/sec are indicative of the stringency of these requirements. Error sources considered in the statistical analysis include probabilistic uncertainties due to wobble, plume impingement, nutation, thruster and accelerometer misalignments and radial offsets, gyro drift, burn timing, mass properties and algorithm errors. With its twelve thrusters, the versatility of the spacecraft to maneuver among the Galilean moons for eleven encounters after delivering a probe into the Jovian atmosphere provides a new level of challenge in the area of maneuver analysis.

Longuski, J. M.↗
NASA NTRS1979

Maneuver analysis

The maneuver design for Viking was accomplished in two phases. First, there was the preflight design and strategy development that was dictated by mission objectives and requirements. Orbit determination and maneuver execution accuracy statistics were used, together with propellant budget considerations, to determine specific maneuver requirements and strategies. The second phase of the maneuver design occurred in flight. The maneuver analyses that were performed in flight, the software that was employed, and the actual inflight results for the entire orbital phase of the nominal Viking Mission are described with emphasis on prelanding objectives and geometry considerations. The actual adaptive design and implementation of the maneuvers as the mission progressed are considered. This design process included the minimization of both propellant usage and the effects of maneuver execution errors, while complying with several mechanization constraints.

Mitchell, R. T.↗
NASA NTRS2019

Refining Lucy Mission Delta-V During Spacecraft Design Using Trajectory Optimization Within High-Fidelity Monte Carlo Maneuver Analysis

Recent advances linking medium-fidelity trajectory optimization and high-fidelity trajectory propagation/maneuver design software with Monte Carlo maneuver analysis and parallel processing enabled realistic statistical delta-V estimation well before launch. Completing this high-confidence, refined statistical maneuver analysis early enabled release of excess delta-V margin for increased dry mass margin for the Lucy Jupiter Trojan flyby mission. By 3.3 years before launch, 16 of 34 TCMs had 1000 re-optimized trajectory design samples, yielding tens of m/s lower 99%-probability delta-V versus targeting maneuvers to one optimal trajectory. One year later, 1000 re-optimized samples of all deterministic maneuvers and subsequent flybys further lowered estimated delta-V.

Trojan↗
NASA NTRS2021

I’ll have the Porter: Interactively Visualizing the Results of Statistical Maneuver Analysis

Mission design and navigation relies on statistical maneuver analysis and Monte Carlo simulations when evaluating candidate mission trajectories. Engineers must analyze large quantities of data to optimize mission safety and propellant margins, but currently rely on static text files and dense PDF slide decks to review simulation results. This approach is time-intensive, non-interactive, and difficult to share or coordinate with other mission designers. To improve this process, we present Porter: a web-based interactive mission analysis tool. This work describes Porter’s user-centered design process, its processing pipeline for importing and processing LAMBIC simulation data, core interactive features, and preliminary user feedback.

Ramaswamy, Basak Alper↗
NASA NTRS2006

Maneuver Analysis and Targeting Strategy for the Stardust Re-Entry Capsule

The Stardust Sample Return Capsule (SRC) returned to Earth on January 15, 2006 after seven years of collecting interstellar and comet particles over three heliocentric revolutions, as shown in Figure 1. The SRC was carried on board the Stardust spacecraft, as shown in Figure 2. Because the spacecraft was built with unbalanced thrusters, turns and attitude control maintenance resulted in undesirable delta-v being imparted to the trajectory. As a result, a carefully planned maneuver strategy was devised to accurately target the Stardust capsule to the Utah Test and Training Range (UTTR). This paper provides an overview of the Stardust spacecraft and mission and describes the maneuver strategy that was employed to achieve the stringent targeting requirements for landing in Utah. In addition, an overview of Stardust maneuver analysis tools and techniques will also be presented.

targeting↗
NASA NTRS2006

Maneuver Analysis and Targeting Strategy for the Stardust Re-Entry Capsule

Stardust employed biased maneuvers to limit turns and minimize execution errors. Biased maneuvers also addressed planetary protection and safety issues. Stardust utilized a fixed-direction burn for the final maneuver to match the prevailing attitude so no turns were needed. Performance of the final burn was calibrated in flight.

targeting↗
NASA NTRS2001

Monte-carlo maneuver analysis for the microwave anisotropy probe

The results of this trajectory replication are presented, followed by the results of monte-carlo maneuver simulations. The results are subject to two important assumptions: that linearization is valid (as the software used for the monte-carlo simulation, LAMBIC, is based on a linearization of the trajectory about the nominal) and that the planned human-in-the-loop lunar targeting may be approximated by targeting to a fixed aimpoint.

monte-carlo↗
NASA NTRS1990

Maneuver analysis for the Mars Observer mission

The Mars Observer mission will study Mars from a low-altitude orbit unlike that of any previous mission. During interplanetary cruise, propulsive maneuvers are required to satisfy limits on the probability of impact with Mars and to ensure capture. After Mars capture, the Observer must be brought to an accurate, near-circular mapping orbit through a series of maneuvers. Propulsive maneuver strategies have been developed to meet these needs. This paper describes the methods used in the analysis, the control capabilities, and the associated expected velocity changes for the mission.

Halsell, C. Allen↗
NASA NTRSDate not supplied

Preliminary Statistical Maneuver Analysis for A Low-Thrust NRHO to DRO Transfer

To understand practical implications of implementing transfers that leverage multibody dynamics, a statistical analysis is performed on an Earth-Moon Near Rectilinear Halo Orbit (NRHO) to distant retrograde orbit (DRO) transfer using solar electric propulsion. The statistical analysis includes perturbations due to maneu- ver execution and orbit determination error to understand operational character- istics of the transfer such as statistical ∆V and statistical state targeting errors at the final DRO. We explore the need for low-thrust trajectory correction maneuver (TCM) opportunities as well as the delivery accuracy to the final target. Finally, we explore options for long-term-stable target DROs.

low thrust↗
NASA NTRS1975

Development of a method for optimal maneuver analysis of complex space missions

A system that allows mission planners to find optimal multiple-burn space trajectories easily is described. Previously developed methods with different gravity assumptions perform the optimization function. The power of these programs is extended by a method of costate estimation. A penalty function method of constraining coast arc times to be positive is included. The capability of the method is demonstrated by finding the optimal control for three different space missions. These include a shuttle abort-once-around mission and two- and three-burn geosynchronous satellite-placement missions.

Mcadoo, S. F., Jr.↗
NASA NTRS1993

Analysis of the staging maneuver and booster glideback guidance for a two-stage, winged, fully reusable launch vehicle

One of the promising launch concepts that could replace the current space shuttle launch system is a two-stage, winged, vertical-takeoff, fully reusable launch vehicle. During the boost phase of ascent, the booster provides propellant for the orbiter engines through a cross-feed system. When the vehicle reaches a Mach number of 3, the booster propellants are depleted and the booster is staged and glides unpowered to a horizontal landing at a launch site runway. Two major design issues for this class of vehicle are the staging maneuver and the booster glideback. For the staging maneuver analysis, a technique was developed that provides for a successful separation of the booster from the orbiter over a wide range of staging angles of attack. A longitudinal flight control system was developed for control of the booster during the staging maneuver. For the booster glide back analysis, a guidance algorithm was developed that successfully guides the booster from the completion of the staging maneuver to a launch site runway while encountering many off-nominal atmospheric, aerodynamic, and staging conditions.

Naftel, J. Christopher↗
NASA NTRS1993

Optimizing interplanetary trajectories with deep space maneuvers

Analysis of interplanetary trajectories is a crucial area for both manned and unmanned missions of the Space Exploration Initiative. A deep space maneuver (DSM) can improve a trajectory in much the same way as a planetary swingby. However, instead of using a gravitational field to alter the trajectory, the on-board propulsion system of the spacecraft is used when the vehicle is not near a planet. The purpose is to develop an algorithm to determine where and when to use deep space maneuvers to reduce the cost of a trajectory. The approach taken to solve this problem uses primer vector theory in combination with a non-linear optimizing program to minimize Delta(V). A set of necessary conditions on the primer vector is shown to indicate whether a deep space maneuver will be beneficial. Deep space maneuvers are applied to a round trip mission to Mars to determine their effect on the launch opportunities. Other studies which were performed include cycler trajectories and Mars mission abort scenarios. It was found that the software developed was able to locate quickly DSM's which lower the total Delta(V) on these trajectories.

Navagh, John↗
NASA NTRS1991

Dynamics and control of the Space Station Freedom docking/array feathering maneuver

Analysis performed at Lewis Research Center has indicated that it is possible to fail a photovoltaic array of the Space Station Freedom during a Shuttle approach, due to impingements by Shuttle attitude jet firing plumes. A solution to this potential problem is the feathering of the arrays. This study deals with fine adjustments in feathered position for extra plume load relief. A mathematical model for fine feathering is described. The Shuttle is treated as a single rigid body, with prescribed jet firings. Freedom is treated as a system of rigid bodies, with high-fidelity gimbal dynamics. Uncertainty is found in disturbances, plume dynamic pressure, gimbal friction and misalignments. Assumptions, model structure and analysis test plan are presented.

Graham, Ronald E.↗