Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Thermodynamic evaluation of mass diffusion in ionic mixtures

The thermodynamic technique of Landau and Lifshitz originally developed for inter-species diffusion in a binary neutral gas mixture is extended to a quasi-neutral plasma with two ion species. It is shown that, while baro- and electro-diffusion coefficients depend on the choice of the thermodynamic system, prediction for the total diffusive mass flux is invariant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of species-mass diffusion in binary-species boundary layers at high pressure using direct numerical simulations

Here, direct numerical simulations of single-species and binary-species temporal boundary layers at high pressure are performed with special attention to species-mass diffusion. The working fluids are nitrogen or a mixture of nitrogen and methane. Mean profiles and turbulent fluctuations of mass fraction show that their qualitative characteristics are different from those of streamwise velocity and temperature, due to the different boundary conditions. In a wall-parallel plane near the wall, the streamwise velocity and temperature have streaky patterns and the fields are similar. However, the mass fraction field at the same location is different from the streamwise velocity and temperature fields indicating that species-mass diffusion is not similar to the momentum and thermal diffusion. In contrast, at the centre and near the edge of the boundary layer, the mass fraction and temperature fields have almost the same pattern, indicating that the similarity between thermal and species-mass diffusion holds away from the wall. The lack of similarity near the wall is traced to the Soret effect that induces a temperature-gradient-dependent species-mass flux. As a result, a new phenomenon has been identified for a non-isothermal binary-species system – uphill diffusion, which in its classical isothermal definition can only occur for three or more species. A quadrant analysis for the turbulent mass flux reveals that near the wall the Soret effect enhances the negative contributions of the quadrants. Due to the enhancement of the negative contributions, small species-concentration fluid tends to be trapped near the wall.

42 ENGINEERING↗

Transformed Fourier and Fick equations for the control of heat and mass diffusion

We review recent advances in the control of diffusion processes in thermodynamics and life sciences through geometric transforms in the Fourier and Fick equations, which govern heat and mass diffusion, respectively. We propose to further encompass transport properties in the transformed equations, whereby the temperature is governed by a three-dimensional, time-dependent, anisotropic heterogeneous convection-diffusion equation, which is a parabolic partial differential equation combining the diffusion equation and the advection equation. We perform two dimensional finite element computations for cloaks, concentrators and rotators of a complex shape in the transient regime. We precise that in contrast to invisibility cloaks for waves, the temperature (or mass concentration) inside a diffusion cloak crucially depends upon time, its distance from the source, and the diffusivity of the invisibility region. However, heat (or mass) diffusion outside cloaks, concentrators and rotators is unaffected by their presence, whatever their shape or position. Finally, we propose simplified designs of layered cylindrical and spherical diffusion cloaks that might foster experimental efforts in thermal and biochemical metamaterials.

36 MATERIALS SCIENCE↗

Modeling of diffusive mass transport in micropores in cement based materials

In order to predict long-term leaching behavior of cement constituents for safety assessments of radioactive waste disposal, we modeled diffusive mass transport in micropores in cement based materials. Based on available knowledge on the pore structure, we developed a transport porosity model that enables us to estimate effective porosity available for diffusion (transport porosity) in cement based materials. We microscopically examined the pore structure of hardened cement pastes to partially verify the model. Effective diffusivities of tritiated water in hardened cement pastes were also obtained experimentally, and were shown to be proportional to the estimated transport porosity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

GRAVITATIONAL INSTABILITY OF SOLIDS ASSISTED BY GAS DRAG: SLOWING BY TURBULENT MASS DIFFUSIVITY

The Goldreich and Ward (axisymmetric) gravitational instability of a razor thin particle layer occurs when the Toomre parameter Q{sub T} {identical_to} c{sub p}{Omega}{sub 0}/{pi}G{Sigma}{sub p} < 1 (c{sub p} being the particle dispersion velocity). Ward extended this analysis by adding the effect of gas drag upon particles and found that even when Q{sub T} > 1, sufficiently long waves were always unstable. Youdin carried out a detailed analysis and showed that the instability allows chondrule-sized ({approx}1 mm) particles to undergo radial clumping with reasonable growth times even in the presence of a moderate amount of turbulent stirring. The analysis of Youdin includes the role of turbulence in setting the thickness of the dust layer and in creating a turbulent particle pressure in the momentum equation. However, he ignores the effect of turbulent mass diffusivity on the disturbance wave. Here, we show that including this effect reduces the growth rate significantly, by an amount that depends on the level of turbulence, and reduces the maximum intensity of turbulence the instability can withstand by 1-3 orders of magnitude. The instability is viable only when turbulence is extremely weak and the solid to gas surface density of the particle layer is considerably enhanced over minimum-mass-nebula values. A simple mechanistic explanation of the instability shows how the azimuthal component of drag promotes instability while the radial component hinders it. A gravito-diffusive overstability is also possible but never realized in the nebula models.

79 ASTRONOMY AND ASTROPHYSICS↗

Diffusive mass transport in agglomerated glassy fallout from a near-surface nuclear test

Aerodynamically-shaped glassy fallout is formed when vapor phase constituents from the nuclear device are incorporated into molten carriers (i.e. fallout precursor materials derived from soil or other near-field environmental debris). The effects of speciation and diffusive transport of condensing constituents are not well defined in models of fallout formation. Previously we reported observations of diffuse micrometer scale layers enriched in Na, Fe, Ca, and 235 U, and depleted in Al and Ti, at the interfaces of agglomerated fallout objects. Here in this paper, we derive the timescales of uranium mass transport in such fallout as it cools from 2500 K to 1500 K by applying a 1-dimensional planar diffusion model to the observed 235 U/ 30 Si variation at the interfaces. By modeling the thermal transport between the fireball and the carrier materials, the time of mass transport is calculated to be <0.6 s, <1 s, <2 s, and <3.5 s for fireball yields of 0.1 kt, 1 kt, 10 kt, and 100 kt respectively. Based on the calculated times of mass transport, a maximum temperature of deposition of uranium onto the carrier material of ~2200 K is inferred (1σ uncertainty of ~200 K). We also determine that the occurrence of micrometer scale layers of material enriched in relatively volatile Na-species as well as more refractory Ca-species provides evidence for an oxygen-rich fireball based on the vapor pressure of the two species under oxidizing conditions. These results represent the first application of diffusion-based modeling to derive material transport, thermal environments, and oxidation-speciation in near-surface nuclear detonation environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiation and porosity effects on the magnetohydrodynamic flow near a vertical plate that applies shear stress to the fluid with mass diffusion

This article studies the radiation and porosity effects on the unsteady magnetohydrodynamic free convection flow of an incompressible viscous fluid past an infinite vertical plate that applies a shear stress f(t) to the fluid. Conjugate phenomenon of heat and mass transfer is considered. General solutions of the dimensionless governing equations along with imposed initial and boundary conditions are determined using Laplace transform technique. The solution of velocity is presented as a sum of mechanical and non mechanical parts. These solutions satisfy all imposed initial and boundary conditions and reduce to some known solutions from the literature as special cases. The results for embedded parameters are shown graphically. Numerical results for skin friction, Nusselt number and Sherwood number are computed and presented in tabular forms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unified Entrainment and Detrainment Closures for Extended Eddy-Diffusivity Mass-Flux Schemes

The extended Eddy Diffusivity Mass Flux (EDMF) scheme is used as a unied parameterization that simulates subgrid-scale dynamics across a range of regimes.This work presents unied entrainment and detrainment closures that allow this scheme to simulate the dry convective boundary layer, shallow convection and deep convection , while adjacent works present other necessary closures for this unied scheme and test its performance for stable, stratocumulus topped and convective boundary layers. Entrainment and detrainment are modeled as a combination of turbulent and dynamical processes. The turbulent component is taken as downgradient diffusion between subdomains. The dynamical component is based on a ratio of buoyancy and vertical velocity that ensures consistent treatment of the ratio of mass-flux at vanishing area fraction. Dynamical detrainment is controlled by the difference in relative humidity between subdomains when liquid water is present. These closures are rst evaluated with entrainment and detrainment diagnosed from Large Eddy Simulations where decaying tracers are used to identify the different subdomains and mass exchanges between them. When implemented in a single column model (SCM), these closures are tested in simulations of several observationally motivated cases of dry convective boundary layer, shallow convection and deep convection. Results show good agreement between the SCM and Large Eddy Simulations in key properties for climate models and profiles of first, second and third moments. The development of diurnal cycles and the onset of and precipitation (with simplified microphysics) are well predicted by the SCM.

54 ENVIRONMENTAL SCIENCES↗

Diffuse supernova neutrinos: oscillation effects, stellar cooling and progenitor mass dependence

We estimate the diffuse supernova neutrino background (DSNB) using the recent progenitor-dependent, long-term supernova simulations from the Basel group and including neutrino oscillations at several post-bounce times. Assuming multi-angle matter suppression of collective effects during the accretion phase, we find that oscillation effects are dominated by the matter-driven MSW resonances, while neutrino-neutrino collective effects contribute at the 5–10% level. The impact of the neutrino mass hierarchy, of the time-dependent neutrino spectra and of the diverse progenitor star population is 10% or less, small compared to the uncertainty of at least 25% of the normalization of the supernova rate. Therefore, assuming that the sign of the neutrino mass hierarchy will be determined within the next decade, the future detection of the DSNB will deliver approximate information on the MSW-oscillated neutrino spectra. With a reliable model for neutrino emission, its detection will be a powerful instrument to provide complementary information on the star formation rate and for learning about stellar physics.

79 ASTRONOMY AND ASTROPHYSICS↗

Mineral reaction kinetics constrain the length scale of rock matrix diffusion

Mass transport by aqueous fluids is a dynamic process in shallow crustal systems, redistributing nutrients as well as contaminants. Rock matrix diffusion into fractures (void space) within crystalline rock has been postulated to play an important role in the transient storage of solutes. The reacted volume of host rock involved, however, will be controlled by fluid-rock reactions. Here we present the results of a study which focusses on defining the length scale over which rock matrix diffusion operates within crystalline rock over timescales that are relevant to safety assessment of radioactive and other long-lived wastes. Through detailed chemical and structural analysis of natural specimens sampled at depth from an active system (Toki Granite, Japan), we show that, contrary to commonly proposed models, the length scale of rock matrix diffusion may be extremely small, on the order of centimetres, even over timescales of millions of years. This implies that in many cases the importance of rock matrix diffusion will be minimal. Additional analyses of a contrasting crystalline rock system (Carnmenellis Granite, UK) corroborate these results.

58 GEOSCIENCES↗

Neutrino diffusion and mass ejection in protoneutron stars

We discuss the mass ejection mechanism induced by diffusion of neutrino during the early stage of the protoneutron star cooling. A dynamical calculation is employed in order to determine the amount of matter ejected and the remnant compact object mass. An equation of state considering hadronic and quark phases for the stellar dense matter was used to solve the whole time evolution of the system during the cooling phase. The initial neutrino population was obtained by considering beta equilibrium in the dense stellar matter with confined neutrinos, in the very early period of the deleptonic stage of the nascent pulsar. For specified initial configurations of the protoneutron star, we solve numerically the set of equations of motion together with neutrino diffusion through the dense stellar medium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of thermophoresis on high-pressure binary-species boundary layers with uniform and non-uniform compositions

Direct numerical simulations of high-pressure binary-species temporal boundary layers are performed to investigate the flow physics for three situations: (1) uniform and equal composition, (2) uniform but unequal compositions and (3) non-uniform composition. Both colder- and hotter-wall situations compared with the free stream are simulated. The working fluid is a nitrogen/methane mixture. The analysis is performed at a case-specific self-similar state. Even when the initial composition is uniform, the methane mean mass fraction decreases near the colder wall, whereas it increases near the hotter wall and the mass fraction fluctuates in the entire boundary layer. Analysis of the species-mass diffusion balance and flow structures reveal that both mass-fraction variation and fluctuations are induced by the Soret effect. When the initial composition is non-uniform and the wall is colder, the methane mean mass fraction monotonically increases from the wall akin to its initial profile. However, when the wall is hotter the mean mass fraction decreases near the wall in contrast to its initial profile, a fact traced through the species-mass diffusion balance to the Soret effect being large and enriching methane near the wall. In contrast, the direction of the Soret flux is opposite for the colder wall, thus keeping the methane concentration small. Although the initial magnitude of the difference between the wall and free-stream temperature is the same in all cases, the situation is not symmetric between colder- and hotter-wall cases; the flow structure exhibits much smaller scales when the wall is hotter than when the wall is colder.

Mechanics↗

Calculation of the mass transfer coefficient for the combustion of a carbon particle

In this paper we address the calculation of the mass transfer coefficient around a burning carbon particle in an atmosphere of O{sub 2}, N{sub 2}, CO{sub 2}, CO, and H{sub 2}O. The complete set of Stefan-Maxwell equations is analytically solved under the assumption of no homogeneous reaction in the boundary layer. An expression linking the oxygen concentration and the oxygen flux at the particle surface (as a function of the bulk gas composition) is derived which can be used to calculate the mass transfer coefficient. A very simple approximate explicit expression is also given for the mass transfer coefficient, that is shown to be valid in the low oxygen flux limit or when the primary combustion product is CO{sub 2}. The results are given in terms of a correction factor to the equimolar counter-diffusion mass transfer coefficient, which is typically available in the literature for specific geometries and/or fluid-dynamic conditions. The significance of the correction factor and the accuracy of the different available expressions is illustrated for several cases of practical interest. Results show that under typical combustion conditions the use of the equimolar counter-diffusion mass transfer coefficient can lead to errors up to 10%. Larger errors are possible in oxygen-enriched conditions, while the error is generally low in oxy-combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distribution and mass of diffuse and dense CO gas in the Milky Way

Emission from carbon monoxide (CO) is ubiquitously used as a tracer of dense star-forming molecular clouds. There is, however, growing evidence that a significant fraction of CO emission originates from diffuse molecular gas. Quantifying the contribution of diffuse CO-emitting gas is vital for understanding the relation between molecular gas and star formation. We examine the Galactic distribution of two CO-emitting gas components, a high column density component detected in {sup 13}CO and {sup 12}CO, and a low column density component detected in {sup 12}CO, but not in {sup 13}CO. The “diffuse” and “dense” components are identified using a combination of smoothing, masking, and erosion/dilation procedures, making use of three large-scale {sup 12}CO and {sup 13}CO surveys of the inner and outer Milky Way. The diffuse component, which globally represents 25% (1.5 × 10{sup 8}M{sub ⊙}) of the total molecular gas mass (6.5 × 10{sup 8} M{sub ⊙}), is more extended perpendicular to the Galactic plane. The fraction of diffuse gas increases from ∼10%–20% at a galactocentric radius of 3–4 kpc to 50% at 15 kpc, and increases with decreasing surface density. In the inner Galaxy, a yet denser component traced by CS emission represents 14% of the total molecular gas mass traced by {sup 12}CO emission. Only 14% of the molecular gas mass traced by {sup 12}CO emission is identified as part of molecular clouds in {sup 13}CO surveys by cloud identification algorithms. This study indicates that CO emission not only traces star-forming clouds, but also a significant diffuse molecular ISM component.

79 ASTRONOMY AND ASTROPHYSICS↗