Search NASA⌕ Search

SEARCH · Search NASA

Results for “material variability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Analytic Thermoelectric Couple Modeling: Variable Material Properties and Transient Operation

To gain a deeper understanding of the operation of a thermoelectric couple a set of analytic solutions have been derived for a variable material property couple and a transient couple. Using an analytic approach, as opposed to commonly used numerical techniques, results in a set of useful design guidelines. These guidelines can serve as useful starting conditions for further numerical studies, or can serve as design rules for lab built couples. The analytic modeling considers two cases and accounts for 1) material properties which vary with temperature and 2) transient operation of a couple. The variable material property case was handled by means of an asymptotic expansion, which allows for insight into the influence of temperature dependence on different material properties. The variable property work demonstrated the important fact that materials with identical average Figure of Merits can lead to different conversion efficiencies due to temperature dependence of the properties. The transient couple was investigated through a Greens function approach; several transient boundary conditions were investigated. The transient work introduces several new design considerations which are not captured by the classic steady state analysis. The work helps to assist in designing couples for optimal performance, and also helps assist in material selection.

Seebeck Effect↗
NASA NTRS1972

Material variability as measured by low temperature electrical resistivity.

Low temperature electrical resistivity was used to determine the material variability (1) between different manufacturers, (2) between different heats from the same manufacturer, and (3) within a given heat for Al 2024, Al-5% Mg alloys, Inconel 718, A286 stainless, and AISI 316. Generally, the coefficient of variation for solution annealed alloys ranged from 1.2 to 14% between manufacturers, 0.8 to 5.1% between heats, and 0.1 to 1.6% within a heat with stainless steels at the low ends and Al 2024 at the high ends. The variability is increased if the material is in a precipitation-hardened condition. A statistical analysis suggests that the variability within a heat is non-normal.

Clark, A. F.↗
NASA NTRSDate not supplied

Material Variability Effects on Damage Development Within Composite Adhesively Bonded Joints

Use of composite adhesively bonded joints (ABJ) is of critical importance to the adoption of composite materials in the automotive industry, as ABJ enable lower stress concentrations as compared to conventional mechanically fastened joints. ABJ are better suited for joining composite materials as compared to fastened joints because fastened joints require drilling of holes which locally affect composite material structure. Composite materials and adhesives are subject to unavoidable stochastic local material variations which make different failure scenarios possible. An experimentally tested ABJ configuration is simulated using finite element analysis (FEA). Experimentally, under tension, the joints failed by three major failure modes, with peak loads ranging from 13.0-16.1 kips. Progressive failure analysis tools are used to simulate damage development within each material within the joint. The simulation agreed well with the average experimental peak load. Stochastically occurring adhesive porosity and matrix-fiber micro-disbonding were numerically simulated. The simulations revealed a similar trend as observed experimentally: joints which failed at higher peak loads had lower levels of damage within the face-sheets of the composite panels which were adhesively bonded; these joints which failed at higher peak loads also had greater damage in the doubler of the experimentally tested double lap joint configuration.

Richard Larson↗
NASA NTRS1989

Variable-Resistivity Material For Memory Circuits

Nonvolatile memory elements packed densely. Electrically-erasable, programmable, read-only memory matrices made with newly-synthesized organic material of variable electrical resistivity. Material, polypyrrole doped with tetracyanoquinhydrone (TCNQ), changes reversibly between insulating or higher-resistivity state and conducting or low-resistivity state. Thin film of conductive polymer separates layer of row conductors from layer of column conductors. Resistivity of film at each intersection and, therefore, resistance of memory element defined by row and column, increased or decreased by application of suitable switching voltage. Matrix circuits made with this material useful for experiments in associative electronic memories based on models of neural networks.

Nagasubramanian, Ganesan↗
NASA NTRS1988

Dynamic shear of granular material under variable gravity conditions

This paper describes some experiments with granular materials which recently have been conducted aboard the NASA KC-135 aircraft during variable gravity maneuvers. The main experimental apparatus consisted of a small drum containing granular material which was rotated slowly while the angle assumed by the slip surface with respect to the horizontal was observed and recorded photographically. Conventional wisdom has held that this 'dynamic angle of response' was a material constant, independent of (among other things) gravitational level. The results presented here are quite contrary, suggesting instead an angle that varies with the reciprocal of the square root of gravity. This finding may have important consequences on the understanding of many active processes in Planetary Geology involving granular materials and may provide qualitative confirmation of some of the theoretical predictions of modern models of granular shear flows.

White, B. R.↗
NASA NTRS2004

Synthesis, Characterization, and Modeling of Nanotube Materials with Variable Stiffness Tethers

Synthesis, mechanical testing, and modeling have been performed for carbon nanotube based materials. Tests using nanoindentation indicated a six-fold enhancement in the storage modulus when comparing the base material (no nanotubes) to the composite that contained 5.3 wt% of nanotubes. To understand how crosslinking the nanotubes may further alter the stiffness, a model of the system was constructed using nanotubes crosslinked with a variable stiffness tether (VST). The model predicted that for a composite with 5 wt% nanotubes at random orientations, crosslinked with the VST, the bulk Young's modulus was reduced by 30% compared to the noncrosslinked equivalent.

Frankland, S. J. V.↗
NASA NTRS2004

Cross-Linked Nanotube Materials with Variable Stiffness Tethers

The constitutive properties of a cross-linked single-walled carbon nanotube material are predicted with a multi-scale model. The material is modeled as a transversely isotropic solid using concepts from equivalent-continuum modeling. The elastic constants are determined using molecular dynamics simulation. Some parameters of the molecular force field are determined specifically for the cross-linker from ab initio calculations. A demonstration of how the cross-linked nanotubes may affect the properties of a nanotube/polyimide composite is included using a micromechanical analysis.

Frankland, Sarah-Jane V.↗
NASA NTRSDate not supplied

Understanding Variability in Mechanical Behavior of Adhesively Bonded Sandwich Joints due to Stochastic Material Damage

A mesoscale progressive damage analysis was applied to the analysis of recently tested adhesively bonded sandwich panels, in which ten nominally identical tension loaded panels failed in three different failure modes, with peakloads ranging from 13.0 –16.1 kips. A parametric finite element model for progressive damage analysis of an adhesively bonded joint (ABJ) considering matrix and fiber damage, and delamination cracks in unidirectional and fabric composite sections of the joint, as well as core crushing, and adhesive fracture was developed. The model was developed using Abaqus/Explicit and utilized continuum damage mechanics material models for intralaminar damage in the facesheet and doubler plies, cohesive elements for delamination and adhesive debonding, and discretized cells considering plasticity to model crushing of the aluminum honeycomb core. Analysis predictions obtained with a pristine model agreed well with the average experimental peak load, strain in the joint, and post-test damage states. Then, various methods to incorporate stochastic material variability into ABJ model were evaluated. These methods included simulation of pre-existing matrix damage, pre-existing adhesive porosity, and uniform modification of adhesive properties. These material and manufacturing defects changed the damage mode predictions in some cases. The analysis of stochastic strength due to the considered defects revealed unintuitive damage mode interaction in the ABJ, explaining some structure-property relationships observed experimentally.

Richard Larson↗
NASA NTRS1982

Advances and trends in plate buckling research

Advances and current trends in plate bucklin research are summarized. The field is divided into three parts: (1) classical buckling studies, including plates of rectangular, circular and other shapes; (2) classical complicating effects, including elastic foundation, anisotropic material, variable thickness, shear deformation and nonhomogeneous material; and (3) nonclassical considerations, including postbuckling, imperfections, parametric excitation, follower forces, magnetoelastic buckling and inelastic buckling.

Leissa, A.↗
NASA NTRS1983

Freeze/Thaw Properties of Cellular Glass

Without moisture, temperature cycles do no harm. Experiments described in new report indicate inherent material variability greater deterrent to application of material than freeze/thaw effects.

Frickland, P. O.↗
NASA NTRS1990

Kinetics of gas-to-liquid and liquid-to-solid transfer of particles in metal-matrix composites

Analytical models for transfer of particles from gas to liquid and from liquid to solid are introduced. The model for calculation of the pushing/engulfment transition in directionally solidified particulate metal matrix composites, considers process thermodynamics, process kinetics, thermophysical properties and buoyant forces. Based on processing variables (solidification velocity and direction) and on material variables (interface energies, particle size, particle and liquid density, volume fraction of particles and particle/liquid thermal conductivity ratio) four types of behavior were predicted. Also, two numerical models for liquid-to-solid transfer are discussed, as well as the limitations of presently available models.

Stefanescu, D. M.↗
NASA NTRS1990

Configuration design sensitivity analysis of built-up structures

In the design of complex built-up structures that are made of truss, beam, membrane, shell, and solid, there are five different kinds of design variables: material property, sizing, shape, configuration, and topological variables. Previous research has shown that the improvement in performances obtained by altering the configuration of structural components can be much more significant than those obtained when the geometry is assumed to be fixed. Using the variational approach, a unified design sensitivity was developed for the first three kinds of design variables, and was further extended recently in many structural analysis problems such as nonlinear, structural dynamics, and frequency response analysis. A continuum design sensitivity analysis method is developed for the configuration design variable of built-up structures.

Choi, Kyung K.↗
NASA NTRS2002

Thermal Technology Development Activities at the Goddard Space Flight Center - 2001

This presentation provides an overview of thermal technology development activities carried out at NASA's Goddard Space Flight Center during 2001. Specific topics covered include: two-phase systems (heat pipes, capillary pumped loops, vapor compression systems and phase change materials), variable emittance systems, advanced coatings, high conductivity materials and electrohydrodynamic (EHD) thermal coatings. The application of these activities to specific space missions is also discussed.

Butler, Dan↗
NASA NTRSDate not supplied

NASA Goddard Thermal Technology Roadmap 2023

This presentation provides an overview of recent thermal technology development activities carried out at NASA's Goddard Space Flight Center. Topics include two-phase systems (heat pipes, loop heat pipes and phase change materials), variable emittance systems, advanced coatings and high conductivity materials. The application of these activities to specific space missions is also discussed.

Thermal, technology, roadmaps↗
NASA NTRS1991

Thermal protection for hypervelocity flight in earth's atmosphere by use of radiation backscattering ablating materials

A heat-shield-material response code predicting the transient performance of a material subject to the combined convective and radiative heating associated with the hypervelocity flight is developed. The code is dynamically interactive to the heating from a transient flow field, including the effects of material ablation on flow field behavior. It accomodates finite time variable material thickness, internal material phase change, wavelength-dependent radiative properties, and temperature-dependent thermal, physical, and radiative properties. The equations of radiative transfer are solved with the material and are coupled to the transfer energy equation containing the radiative flux divergence in addition to the usual energy terms.

Howe, John T.↗
NASA NTRS1975

Materials technology for an advanced space power nuclear reactor concept: Program summary

The results of a materials technology program for a long-life (50,000 hr), high-temperature (950 C coolant outlet), lithium-cooled, nuclear space power reactor concept are reviewed and discussed. Fabrication methods and compatibility and property data were developed for candidate materials for fuel pins and, to a lesser extent, for potential control systems, reflectors, reactor vessel and piping, and other reactor structural materials. The effects of selected materials variables on fuel pin irradiation performance were determined. The most promising materials for fuel pins were found to be 85 percent dense uranium mononitride (UN) fuel clad with tungsten-lined T-111 (Ta-8W-2Hf).

Gluyas, R. E.↗
NASA NTRS2007

Spherical Cryogenic Hydrogen Tank Preliminary Design Trade Studies

A structural analysis, sizing optimization, and weight prediction study was performed by Collier Research Corporation and NASA Glenn on a spherical cryogenic hydrogen tank. The tank consisted of an inner and outer wall separated by a vacuum for thermal insulation purposes. HyperSizer (Collier Research and Development Corporation), a commercial automated structural analysis and sizing software package was used to design the lightest feasible tank for a given overall size and thermomechanical loading environment. Weight trade studies were completed for different panel concepts and metallic and composite material systems. Extensive failure analyses were performed for each combination of dimensional variables, materials, and layups to establish the structural integrity of tank designs. Detailed stress and strain fields were computed from operational temperature changes and pressure loads. The inner tank wall is sized by the resulting biaxial tensile stresses which cause it to be strength driven, and leads to an optimum panel concept that need not be stiffened. Conversely, the outer tank wall is sized by a biaxial compressive stress field, induced by the pressure differential between atmospheric pressure and the vacuum between the tanks, thereby causing the design to be stability driven and thus stiffened to prevent buckling. Induced thermal stresses become a major sizing driver when a composite or hybrid composite/metallic material systems are used for the inner tank wall for purposes such as liners to contain the fuel and reduce hydrogen permeation.

Arnold, Steven M.↗