Search NASA⌕ Search

SEARCH · Search NASA

Results for “melting behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Effect of sucrose on foaming and melting behavior of a low-activity waste melter feed

Reductants, such as sucrose, are added to nuclear waste melter feeds containing high fractions of nitrates and nitrites to reduce excessive foaming during feed-to-glass conversion and to decrease sulfate segregation and increase technetium retention. The sucrose effect on foaming and melting reactions during the conversion was examined using the feed volume expansion, thermogravimetric analysis, evolved gas analysis, X-ray diffraction, and scanning electron microscopy with energy dispersive X-ray spectrometry. Different sucrose additions were used to vary the carbon to nitrogen (C/N) ratio in the melter feed. As C/N ratio increased, the extent of foaming decreased and N2/NO ratio increased in the gas phase evolved. Significant foam suppression, rapid gas release at approximately 250°C, and reduction of transition metal oxides were observed at C/N > 1.1.

Appel, Connor J.↗
DOE OSTI2024

The Melting Behavior of Hydrogen Direct Reduced Iron in Molten Steel and Slag: An Integrated Computational and Experimental Study

Direct reduced iron (DRI) and hot briquetted iron (HBI) are essential feedstocks for tramp element control in the electric arc furnace (EAF). Due to greenhouse gas (GHG) concerns related to CO2 emissions, hydrogen as a substitute for natural gas and a reductant in DRI production is being widely explored to reduce GHG emissions in ironmaking. This study examines the melting behavior of hydrogen DRI (H-DRI) pellets in the EAF containing low-carbon (0.1 wt.%) molten steel and molten slag. A computational heat transfer model was developed to predict the melting behavior of H-DRI pellets. To validate the model, a set of experimental laboratory simulations was conducted by immersing H-DRI in a molten steel bath and slag. The temperature history at the center of the pellet during melting and the shell thickness at different melting stages were utilized to validate the model. The simulation results agree with the experimental measurements of steel balls and H-DRI in different metallic molten steel and slag baths.

Materials Science↗
DOE OSTI2022

Melting Behavior of Conventional and Hydrogen-Reduced DRI in a Simulated EAF Steel Bath

The melting behavior of carbon-free direct reduced iron (DRI) produced by hydrogen reduction has been investigated in a simulated electric arc furnace (EAF) melting environment. A testing apparatus was created to document the melting rates under various bath conditions in slag and steel. This investigation is specific to pellets melted in a steel bath. A model was developed to simulate the shell growth and melting rate of a non-reactive DRI pellet in molten steel. Data acquired from preliminary experiments are utilized to validate the model. This investigation sheds light on the potential effects of melting hydrogen-reduced DRI in the EAF.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Melting behavior and phase relations of lunar samples

An attempt was made to show that feldspar would float during melting. Large anorthite crystals were placed beneath a silicate glass representative of liquid in which plagioclase accumulation is thought to have occurred. In less than 3 hours at 1,300 C, the crystals rose to the top in a Pt crucible 3 cm deep equilibrated in air and in a Mo crucible 1.5 cm deep equilibrated in an H2/CO2 gas stream of log PO2 = -10.9 (below Fe/FeO). These results suggest that lunar crustal formation by feldspar flotation is possible without special recourse to differential sinking of plagioclase versus mafic minerals or selective elutriation of plagioclase.

Hays, J. F.↗
NASA NTRS1975

Melting behavior and phase relations of lunar samples

Cooling rate studies of 12002 were conducted and the results interpreted in terms of the crystallization history of this rock and certain other picritic Apollo 12 samples. Calculations of liquid densities and viscosities during crystallization, crystal settling velocities, and heat loss by the parent rock body are discussed, as are petrographic studies of other Apollo 12 samples. The process of magmatic differentiation that must have accompanied the early melting and chemical fractionation of the moon's outer layers was investigated. The source of regions of both high- and low-titanium mare basalts were also studied.

Hays, J. F.↗
DOE OSTI2021

Reproduction of melting behavior for vitrified hillforts based on amphibolite, granite, and basalt lithologies

Abstract European Bronze and Iron Age vitrified hillforts have been known since the 1700s, but archaeological interpretations regarding their function and use are still debated. We carried out a series of experiments to constrain conditions that led to the vitrification of the inner wall rocks in the hillfort at Broborg, Sweden. Potential source rocks were collected locally and heat treated in the laboratory, varying maximum temperature, cooling rate, and starting particle size. Crystalline and amorphous phases were quantified using X-ray diffraction both in situ, during heating and cooling, and ex situ, after heating and quenching. Textures, phases, and glass compositions obtained were compared with those for rock samples from the vitrified part of the wall, as well as with equilibrium crystallization calculations. ‘Dark glass’ and its associated minerals formed from amphibolite or dolerite rocks melted at 1000–1200 °C under reducing atmosphere then slow cooled. ‘Clear glass’ formed from non-equilibrium partial melting of feldspar in granitoid rocks. This study aids archaeological forensic investigation of vitrified hillforts and interpretation of source rock material by mapping mineralogical changes and glass production under various heating conditions.

42 ENGINEERING↗
DOE OSTI2024

Ambient melting behavior of stoichiometric uranium oxides

As UO 2 is easily oxidized during the nuclear fuel cycle it is important to have a detailed understanding of the structures and properties of the oxidation products. Experimental work over the years has revealed many stable uranium oxides including UO 2 , U 4 O 9 (UO 2.25 ), U 3 O 7 (UO 2.33 ), U 2 O 5 (UO 2.5 ), U 3 O 8 (UO 2.67 ), and UO 3 , all with a number of different polymorphs. These oxides are broadly split into two categories, fluorite-based structures with stoichiometries in the range of UO 2 to UO 2.5 and less dense layered-type structures with stoichiometries in the range of UO 2.5 to UO 3 . While UO 2 is well characterized, both experimentally and computationally, there is a paucity of data concerning higher stoichiometry oxides in the literature. In this work we determine the ambient melting points of all the six stoichiometric uranium oxides listed above and compare them to the available experimental and/or theoretical data. We demonstrate that a family of the six ambient melting points map out a solid-liquid transition boundary consistent with the high-temperature portion of the phase diagram of uranium-oxygen system suggested by Babelot et al.

Burakovsky, Leonid↗
DOE OSTI2021

Iron-rich microstructure records of high temperature multi-component silicate melt behavior in nuclear fallout

Above-ground nuclear explosions that interact with the surface of the earth entrain materials from the surrounding environment, influencing the resulting physical and chemical evolution of the fireball, which can affect the final chemical phase and mobility of hazardous radionuclides that are dispersed in the environment as fallout particles. The interaction of iron with a nuclear explosion is of specific interest due to the potential for iron to act as a redox buffer and because of the likelihood of significant masses of metals to be present in urban environments. We investigated fallout from a historic surface interacting nuclear explosion conducted on a steel tower and report the discovery of widespread and diverse iron-rich micro-structures preserved within the samples, including crystalline dendrites and micron-scale iron-rich spheres with liquid immiscibility textures. We assert these micro-structures reflect local redox conditions and cooling rates and can inform interpretation of high temperature events, enabling new insights into fireball condensation physics and chemistry when metals from the local environment (i.e. structural steel) are vaporized or entrained. Finally, these observations also significantly expand the availability of silicate immiscibility datasets applicable to rapidly quenched systems such as meteorite impact melt glass.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1973

Melting behavior and phase relations in the lunar interior

Phase equilibrium experiments at both high and low pressures on lunar samples and synthetic compositions are reported as well as related petrographic studies of lunar rock samples. The objectives were to trace the origins of rocks found on the lunar surface, to characterize the nature of the lunar interior and to locate and identify the sources of lunar magmas.

Hays, J. F.↗
NASA NTRS2003

Melt-Crucible Wetting Behavior in Semiconductor Melt Growth Systems

The wetting angles of several semiconductor-substrate combinations that are of practical importance for crystal growth have been measured: Ga-GaSb-Sb on fused quartz; Ge on fused quartz and carbon-based substrates, each with different roughness; Si on fused quartz plates and on plates coated with fused quartz, Si3N4, and BN powders. The Ga-GaSb-Sb system showed no significant dependence of the wetting angle on the composition despite a large composition dependence of the surface tension. For Ge, the effect of the roughness on the angle could initially be seen on both types of substrates, but for the fused quartz substrates an equilibrium value independent of the surface treatment was reached after several hours of contact time. For Si, total wetting was found for Si3N4 powders. A reduction of the angle over time was found for both fused quartz and BN powders, with the BN powder showing the highest angle at 150-120 deg.

Croell, A.↗
DOE OSTI2024

Assessment of Readout Techniques for Passive Monitors

This fiscal year (FY) 2023 report on passive temperature sensors covers two main objectives: to demonstrate that the optical dilatometer can successfully process disc shaped silicon carbide (SiC) temperature monitors (TMs), and to demonstrate proof of concept for using the capacitance readout method to read printed melt wires. The SiC objective was successfully met by annealing and analyzing, via optical dilatometry, all eight 3-mm SiC discs provided by the Nuclear Science User Facilities (NSUF) Idaho State University (ISU) Nanostructured Steels for Enhanced Radiation Tolerance (N SERT) experiment, which was irradiated at Idaho National Laboratory (INL)’s Advanced Test Reactor (ATR). Per the ISU N SERT experiment, capsule 1 (KGT 3828 1 and KGT 3828-2) had a design temperature of 300°C +/- 50°C and an exposure of 2 dpa +/- 10%; capsule 2 (KGT 4600 and KGT 4609) had a design temperature of 300°C +/- 50°C and an exposure of 6 dpa +/- 10%; capsule 3 (KGT 4639 C and KGT 4639-D) had a design temperature of 500°C +/- 50°C and an exposure of 6 dpa +/- 10%; and capsule 4 (KGT 3841 3 and KGT 3841 4) had a design temperature of 500°C +/- 50°C and an exposure of 2 dpa +/- 10%. The target exposure rates, in dpa, are the neutron damage for various types of nanostructured steels. All but three SiC TMs (KGT 4600, KGT 4639 D, and KGT 3841 4) revealed averaged peak irradiation temperatures that fell within the design temperature ranges. The three SiC TMs that did not fall within the design temperatures ranges were at least 100°C below that target temperature. Furthermore, SiC TM KGT 3841 C revealed two irradiation regimes: one closer to the 300°C design temperature, and the other closer to the 500°C design temperature. Also, all the SiC TMs’ averaged peak irradiation temperatures came in anywhere between 20°C and 240°C below the irradiation temperatures predicted by the thermal models. This showed the optical dilatometry method to be a reliable and less time intensive process for determining averaged peak irradiation temperatures from passive SiC TMs such as rods and discs. Under the Advanced Sensors and Instrumentation (ASI) program in FY-23, Boise State University (BSU) proposed to demonstrate proof of concept for using a capacitance readout technique applicable to printed melt wires; however, they were stymied by the complexity of the capacitance readout method. In support of the BSU work, INL developed an additively manufactured (AM) ceramic package for encapsulating the new melt wires. Inks were synthesized at BSU that used new protocols rather than following previously established protocols implemented at INL, and testing of various temperatures was conducted at BSU to evaluate the melting behaviors of the printed melt wires. The result was that the capacitance readout technique showed promise but also created more challenges than originally anticipated. For example, the tin ink synthesized at BSU showed unusual melting behaviors that did nothing to enhance the performance of the final printed melt wire prototype in terms of the capacitance readout method. To make the proof of concept work when applied to the printed melt wires, the ASI program would need to invest further resources and time. Consequently, the program is not planning to continue this proof of concept work in FY-24, based on the progress and findings achieved in FY-23.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Annealing study of poly(etheretherketone)

Annealing of PEEK has been studied for two materials cold-crystallized from the rubbery amorphous state. The first material is a low molecular weight PEEK; the second is commercially available neat resin. Differential scanning calorimetry was used to monitor the melting behavior of annealed samples. The effect of thermal history on melting behavior is very complex and depends upon annealing temperature, residence time at the annealing temperature, and subsequent scanning rate. Thermal stability of both materials is improved by annealing, and for an annealing temperature near the melting point, the polymer can be stabilized against reorganization during the scan. Variations of density, degree of crystallinity, and X-ray long period were studied as a function of annealing temperature for the commercial material.

Cebe, Peggy↗
DOE OSTI2022

Deep potential development of transition-metal-rich carbides

In this study, we developed DeepPot-SE type potentials according to the High-Entropy Strategy for Cr 23 C 6 , Fe 23 C 6 , W 23 C 6 , and Mo 23 C 6 systems. Predictive molecular dynamics are then conducted according to various elastic and mechanical properties. Training dataset accuracy is confirmed both numerically and visually. Elastic constants, Poisson Ratio, and bulk modulus are determined and compared to the literature with percent errors ranging between 0.45 and 13.33%. Ground-state lattice constants yield 0.111–1.375% percent error. Linear lattice constant thermal expansion trends are found from 300 to 1500 K as expected. Melting behaviors with clear melting points are observed for each binary. Here, the Birch–Murnaghan Equation of State is suitably fit, providing additional verification of the bulk modulus calculations. Polycrystalline thermal stability is also verified for each binary potential.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ultrafast visualization of phase transitions in nonequilibrium warm dense matter

Intense ultrafast laser excitation brings materials into highly nonequilibrium states with complex solid–liquid phase transitions. These ultrafast processes yield warm dense matter (WDM) conditions characterized by comparable thermal and Fermi energies, and strong ion–ion coupling. Here, we review recent studies employing mega-electron-volt ultrafast electron diffraction to resolve the structural dynamics of nonequilibrium WDM created by femtosecond laser heating of solids. Furthermore, for the study of warm dense gold, the results showed homogeneous melting that occurs within tens of picoseconds at absorbed energy densities of 0.4–1.4 MJ/kg. These results constrained the electron–ion coupling rate and revealed the melting sensitivity to nucleation seeds. For the study of radiation-damaged tungsten, the results showed a melting transition below the melting temperature. Molecular dynamics simulations suggested that this melting behavior is driven by vacancy defect clusters from radiation damage. These studies provided atomic-level insights into the melting behavior of materials under extreme conditions.

36 MATERIALS SCIENCE↗