Search NASA⌕ Search

SEARCH · Search NASA

Results for “metal borohydrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Decoding the Desorption Mechanism of 2LiH:1Mg(NH2)2 Using Metal Borohydrides

The complex metal hydride 2LiH:1Mg­(NH2)2 has emerged as a promising material for stationary hydrogen storage applications, such as seasonal storage or energy backup systems, due to its high volumetric and gravimetric capacities and robust reversibility. However, its widespread adoption is hindered by sluggish reaction rates, performance degradation upon cycling, and improper end-use cases. To address these problems and better understand the desorption pathway, we used metal borohydrides (MBH4; M = Li–Cs) as chemical probes. A thorough analysis of the bulk behavior of all six materials, including hydrogen cycling experiments, X-ray absorption spectroscopy, FTIR, pXRD, solid-state NMR, and ab initio DFT simulations, shows that the borohydride additives decrease the activation energy of hydrogen release by about 20 kJ/mol for MBH4@2:1 materials versus pristine. Furthermore, more surface-sensitive studies show that the amide-to-imide desorption pathway in these materials, while essentially complete in the bulk, is incomplete in the near-surface region, suggesting an “inverse core–shell” desorption mechanism for amide dehydrogenation to imide. The kinetic enhancements produced by MBH4 additives (M = K, Rb, and Cs) are attributed to the destabilization of the amide N–H bond and interaction with the LiH/Mg­(NH2)2 interface to promote H–H bond formation. An inverse core-shell mechanism is also operative in the hydrogen desorption for the 2LiH:1LiNH2 system, suggesting this may be a general feature of amides. Given the fast dehydrogenation rate and large gravimetric capacity, these materials satisfy these requirements for telecom backups and seasonal microgrid storage applications.

Absorption↗
DOE OSTI2022

Solid state synthesis of metal borohydrides

A method for obtaining solid-state metal borohydrides without toxic precursors and expensive solvents includes dry mixing of metal hydrides and metal polyhydro-closo-borate starting materials. High pressure and heating is also used in the method. These materials can be used for hydrogen storage, general reducing agents, organic synthesis, wastewater treatment, and paper pulp bleaching.

Stavila, Vitalie↗
DOE OSTI2024

Machine Learning-Guided Exploration of Ternary Metal Borohydrides

We employ deep machine learning (ML) combined with first-principles calculations to explore energetically favorable ternary metal borohydrides. Using La–B–H as a prototype system, we demonstrate that iteratively trained ML models can efficiently screen hundreds of thousands of hypothetical structures and accurately select a small fraction of promising structures and compositions for further studies by first-principles calculations. Such an ML-guided approach dramatically accelerates the pace of materials discovery. A number of new La–B–H ternary compounds with formation energies within 100 meV/atom above the known ternary convex hull are discovered, including a known stable La(BH 4 ) 3 phase. Moreover, by replacing La with Group 1, 2, 3, 13, and 14 elements in the four lowest-energy La–B–H structures from our ML-guided predictions, several low-energy X–B-H (X = Mg, Ca, Sr, Ba, Sc, Y, Ac, Al, Ga, In, Si, Ge, Sn, Pb) compounds are predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Melting of Magnesium Borohydride under High Hydrogen Pressure: Thermodynamic Stability and Effects of Nanoconfinement

The thermodynamic stability and melting point of magnesium borohydride were probed under hydrogen pressures up to 1000 bar (100 MPa) and temperatures up to 400 °C. At 400 °C, Mg(BH4)2 was found to be chemically stable between 700 and 1000 bar H2, whereas under 350 bar H2 or lower pressures, the bulk material partially decomposed into MgH2 and MgB12H12. The melting point of solvent-free Mg(BH4)2 was estimated to be 367-375 °C, which was above previously reported values by 40-90 °C. Our results indicated that a high hydrogen backpressure is needed to prevent the decomposition of Mg(BH4)2 before measuring the melting point and that molten Mg(BH4)2 can exist as a stable liquid phase between 367 and 400 °C under hydrogen overpressures of 700 bar or above. The occurrence of a pure molten Mg(BH4)2 phase enabled efficient melt-infiltration of Mg(BH4)2 into the pores of porous templated carbons (CMK-3 and CMK-8) and graphene aerogels. Both transmission electron microscopy and small-angle X-ray scattering confirmed efficient incorporation of the borohydride into the carbon pores. The Mg(BH4)2@carbon samples exhibited comparable hydrogen capacities to bulk Mg(BH4)2 upon desorption up to 390 °C based on the mass of the active component; the onset of hydrogen release was reduced by 15-25 °C compared to the bulk. Importantly, melt-infiltration under hydrogen pressure was shown to be an efficient way to introduce metal borohydrides into the pores of carbon-based materials, helping to prevent particle agglomeration and formation of stable closo-polyborate byproducts.

White, James L.↗
DOE OSTI2021

Mg(BH 4 ) 2 -Based Hybrid Metal–Organic Borohydride System Exhibiting Enhanced Chemical Stability in Melt

The formation of a chemically stable and thermally cyclable Mg(BH 4 ) 2 melt is proven to be possible through the utilization of an organic borohydride salt additive. While extensive exploration of additives for lowering the melting point and modifying the chemical stability of Mg(BH 4 ) 2 has been reported, this is the first study to use the organic borohydride salt, tetramethylammonium borohydride (TMAB), to modify the melting behavior of Mg(BH 4 ) 2 . Here, examination of a 5:1 molar mixture of Mg(BH 4 ) 2 and TMAB revealed a reversible melt between 180 and 195 °C, which was reproduced for five thermal cycles. The mixture melt exhibited an enhanced chemical stability compared to melts of the individual Mg(BH 4 ) 2 and TMAB species. It was observed that between room temperature and 250 °C (over 50 °C above the melting point), the mixture releases <0.1 wt % mass, consisting primarily of H 2 . The mixture also exhibits greatly reduced evolution of volatile boron containing compounds compared to either Mg(BH 4 ) 2 or TMAB. The use of TMAB to chemically stabilize a Mg(BH 4 ) 2 -rich melt demonstrated in this work represents an exciting pathway to modification of Mg(BH 4 ) 2 relevant to both hydrogen-storage and magnesium battery fields.

08 HYDROGEN↗
DOE OSTI2025

Direct measurement of covalent three-center, two-electron M–H–B bonding in Zr and Hf borohydrides using B K-edge XAS

Metal borohydride complexes have long been the subject of intense fundamental interest because of their unconventional metal–ligand bonding that occurs via three-center, two-electron M–H–B bonds. This type of bonding implies significant delocalization of electron density over all three atoms, but the degree of orbital mixing between the metal and boron has been difficult to assess by direct experimental means. Herein, we demonstrate how ligand K-edge X-ray absorption spectroscopy (XAS) conducted at the B K-edge yields evidence of significant covalent M–H–B bonding with Zr and Hf. To accommodate the B K-edge XAS studies, which were conducted under ultra-high vacuum (<10 −8 torr), we prepared a series of new [Zr(RBH 3 ) 4 ] and [Hf(RBH 3 ) 4 ] complexes with substituents that attenuate volatility (R = benzyl, phenyl, mesityl, 2,4,6-triisopropylphenyl, and anthryl). 1 H and 11 B NMR spectroscopy, IR spectroscopy, and single-crystal X-ray diffraction (XRD) studies revealed metal and ligand dependent differences in the BH 3 chemical shifts that correlate to changes in M−B distances and select B–H vibrational stretching modes. The B K-edge XAS spectra of the Zr and Hf complexes yielded a pre-edge feature that was assigned as B 1s → M–H–B π* based on comparison to time-dependent density functional theory (TDDFT) calculations. The pre-edge transitions appear due to covalent mixing between boron and the metal, thereby demonstrating how B K-edge XAS can provide direct evidence of covalent three-center, two electron M–H–B bonding in borohydride complexes using boron as a spectroscopic reporter.

Hansen, Hannah M. [University of Iowa, Iowa City, ↗
DOE OSTI2020

The critical role of configurational flexibility in facilitating reversible reactive metal deposition from borohydride solutions

Development of calcium metal batteries has been historically frustrated by a lack of electrolytes capable of supporting reversible calcium electrodeposition. In this paper, we report the study of an electrolyte consisting of Ca(BH 4 ) 2 in tetrahydrofuran (THF) to gain important insight into the role of the liquid solvation environment in facilitating the reversible electrodeposition of this highly reactive, divalent metal. Through interrogation of the Ca 2+ solvation environment and comparison with Mg 2+ analogs, we show that an ability to reversibly electrodeposit metal at reasonable rates is strongly regulated by dication charge density and polarizability. Our results indicate that the greater polarizability of Ca 2+ over Mg 2+ confers greater configurational flexibility, enabling ionic cluster formation via neutral multimer intermediates. Increased concentration of the proposed electroactive species, CaBH 4 + , enables rapid and stable delivery of Ca 2+ to the electrode interface. Finally, this work helps set the stage for future progress in the development of electrolytes for calcium and other divalent metal batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Al2O3 Atomic Layer Deposition on Nanostructured γ-Mg(BH4)2 for H2 Storage

In the context of the growing hydrogen (H 2 ) economy, the demand for H 2 storage materials is high, and metal borohydrides are of particular interest. Magnesium borohydride, Mg(BH 4 ) 2 , has one of the highest hydrogen capacities of all known metal hydrides (14.9 wt % H) but suffers from high operating temperatures, slow kinetics for (de)hydrogenation, and the loss of capacity upon cycling. Strategies to address these challenges include nanoencapsulation and the use of chemical additives. This work is the first to utilize these two strategies simultaneously by using atomic layer deposition (ALD). For this new approach to modify borohydrides, we chose the well-studied Al 2 O 3 ALD process using trimethylaluminum and water. Although there has been limited use of aluminum-based additives for Mg(BH 4 ) 2 , we demonstrate that the low-temperature H 2 capacity was doubled, desorption kinetics were increased by a factor of 3, and 100 cycles of Al 2 O 3 suppressed the release of diborane compared to the uncoated Mg(BH4)2. We identified that the use of trimethylaluminum and water in the ALD process affected the decomposition pathway and that the Al 2 O 3 film growth is dominated by infiltration due to the high porosity of the ..gamma..-phase Mg(BH 4 ) 2 . From these results, the potential of ALD as a method to functionalize solid-state H 2 storage materials is inferred, and recommendations for future ALD processes are presented.

08 HYDROGEN↗
DOE OSTI2025

Computational Investigation of the Chemical Bond between An(III) Ions and Soft-Donor Ligands

The chemical bonding of actinide ions with arene and borohydride ligands is explored via quantum chemical methods to understand how the transuranium elements interact with softdonor ligands. Specifically, the [An(C 6 Me 6 )(BH 4 ) 3 ] complexes (An = U, Np, and Pu) and their reduced congeners are studied. Density functional theory (DFT) shows that the metal–ligand interactions in the neutral complexes are governed by electrostatic interactions. Both DFT and complete active space (CASSCF) results show that as one moves from U to Pu, the 5f-orbitals are stabilized leading to a poorer energy match with the ligand orbitals. This contributes to progressively weaker metal-arene and metal-borohydride interactions across the series due to a decrease in energy-driven covalency. A reduction in orbital contributions to bonding is obtained for the transuranium-arene interactions as well. Upon reduction, the arene is reduced, forming a δ-bond. This causes the An–arene distances to contract by 0.1–0.2 Å compared to the neutral complexes. The ground state is assigned as the intermediate-spin state where the arene radical is antiferromagnetically coupled to the metal-centered f-electrons in Np and Pu. On the other hand, the ferromagnetically and antiferromagnetically coupled states are close in energy in the uranium complex, but do not mix when spin– orbit coupling is included using a state-interaction approach (SO-CASPT2). The population of the CASSCF δ*-antibonding natural orbital increases from U to Pu consistent with the increased An–arene distances, weaker interactions, and decreasing covalency across the series. Although the An–B distance increases by ca. 0.06 Å upon reduction, both the neutral and reduced species involve an An(III)–borohydride bond and as such are qualitatively similar. The Np complexes can be assigned to have slightly weaker bonding than the uranium analogs but are overall “uranium-like”. The Pu complexes are predicted to have less covalent contributions to bonding in both the Pu–arene and Pu–borohydride interactions; however, the Pu–arene interaction is predicted to be particularly weak.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomic Layer Deposition for Materials-Based H2 Storage: Mg(BH4)2 as a Case Study

To meet the requirements for vehicular solid-state hydrogen (H2) storage, novel materials such as metal borohydrides have increasingly been investigated, in particular, magnesium borohydride (Mg(BH4)2). While these materials have a high H2 capacity (> 14 wt%), poor hydrogenation-dehydrogenation cyclability and material degradation, (e.g., loss of boron), need to be overcome. Prior research has indicated that nano-encapsulation and chemical additives can address these challenges. Therefore, we pursued these two strategies simultaneously with atomic layer deposition (ALD) on Mg(BH4)2. We investigated the use of metal-oxides (e.g., Al2O3, TiO2, CeO2), Pt- group metals (e.g., Pd, Ru) as well as pulsing only one precursor molecule (e.g., Al(CH3)3, BBr3, TiCl4), and assessed these modified Mg(BH4)2 in terms of their H2 storage properties. This presentation will also present the benefits and limitations of using vapor-phase techniques to modify the properties of Mg(BH4)2.

atomic layer deposition↗
DOE OSTI2024

Electrochemical Reactivity of Hydrogen Storage Materials: Exploring Borohydride and Hydrazinium Salt Mixtures

Electrochemical characterization of hydrogen storage materials was conducted in a non-aqueous environment to investigate the direct electrochemical release and consumption of hydrogen and the potential for regeneration. We first address the challenge of minimal solubility of the synthetic precursors, sodium borohydride (NaBH 4 ) and hydrazinium bromide (N 2 H 5 Br), in both organic and inorganic solvents. We next determine and calibrate a reference electrode formulation compatible with our non-aqueous media and analytes that demonstrates a stable reference potential. We employ cyclic voltammetry (CV) to characterize the precursors and mixtures thereof. Each CV peak is assigned to a corresponding electrochemical reaction. Using the rate-dependent CV method and Randles–Ševčík equation, we calculate the diffusion coefficient of each chemical (NaBH 4 and N 2 H 5 Br). Analysis of the CVs, coupled with 11B NMR analysis, reveals a room temperature chemical transformation of NaBH 4 and N 2 H 5 Br mixtures into hydrazine borane (N 2 H 4 BH 3 ). These results are particularly significant, considering the limited information available on the electrochemical characterization of metal borohydride and hydrazinium salt in non-aqueous media. This work establishes a foundation for adapting a non-aqueous electrochemical system to further study the borohydride family of chemistries and to design and develop electrochemical devices for direct electrical and chemical energy interconversion with hydrogen storage materials.

08 HYDROGEN↗
DOE OSTI2020

Nanoscale Mg–B via Surfactant Ball Milling of MgB 2 : Morphology, Composition, and Improved Hydrogen Storage Properties

Metal borides have attracted the attention of researchers due to their useful physical properties and unique ability to form high hydrogen-capacity metal borohydrides. We demonstrate improved hydrogen storage properties of a nanoscale Mg–B material made by surfactant ball milling MgB 2 in a mixture of heptane, oleic acid, and oleylamine. Transmission electron microscopy data show that Mg–B nanoplatelets are produced with sizes ranging from 5 to 50 nm, which agglomerate upon ethanol washing to produce an agglomerated nanoscale Mg–B material of micron-sized particles with some surfactant still remaining. X-ray diffraction measurements reveal a two-component material where 32% of the solid is a strained crystalline solid maintaining the hexagonal structure with the remainder being amorphous. Fourier transform infrared shows that the oleate binds in a “bridge-bonding” fashion preferentially to magnesium rather than boron, which is confirmed by density functional theory calculations. The Mg–B nanoscale material is deficient in boron relative to bulk MgB 2 with a Mg–B ratio of ~1:0.75. The nanoscale MgB 0.75 material has a disrupted B–B ring network as indicated by X-ray absorption measurements. Hydrogenation experiments at 700 bar and 280 °C show that it partially hydrogenates at temperatures 100 °C below the threshold for bulk MgB 2 hydrogenation. In addition, upon heating to 200 °C, the H–H bond-breaking ability increases ~10-fold according to hydrogen–deuterium exchange experiments due to desorption of oleate at the surface. This behavior would make the nanoscale Mg–B material useful as an additive where rapid H–H bond breaking is needed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nanoconfinement of Molecular Magnesium Borohydride Captured in a Bipyridine-Functionalized Metal-Organic Framework

The lower limit of metal hydride nanoconfinement is demonstrated through the coordination of a molecular hydride species to binding sites inside the pores of a metal-organic framework (MOF). Magnesium borohydride, which has a high hydrogen capacity, is incorporated into the pores of UiO-67bpy (Zr6O4(OH)4(bpydc)6 with bpydc2- = 2,2'-bipyridine-5,5'- dicarboxylate) by solvent impregnation. The MOF retained its long-range order, and transmission electron microscopy and elemental mapping confirmed the retention of the crystal morphology and revealed a homogeneous distribution of the hydride within the MOF host. Notably, the B-, N-, and Mg-edge XAS data confirm the coordination of Mg(II) to the N atoms of the chelating bipyridine groups. In situ 11B MAS NMR studies helped elucidate the reaction mechanism and revealed that complete hydrogen release from Mg(BH4)2 occurs as low as 200 °C. Sieverts and thermogravimetric measurements indicate an increase in the rate of hydrogen release, with the onset of hydrogen desorption as low as 120 °C, which is approximately 150 °C lower than that of the bulk material. Furthermore, density functional theory calculations support the improved dehydrogenation properties and confirm the drastically lower activation energy for B-H bond dissociation.

Nanoconfinement, Metal Hydrides, Metal-Organic Fra↗
DOE OSTI2021

A New Complex Borohydride LiAl(BH4)2Cl2

A new mixed alkali metal–aluminum borohydride LiAl(BH4)2Cl2 has been prepared via mechanochemical synthesis from the 2LiBH4–AlCl3 mixture. Structural characterization, performed using a combination of X-ray powder diffraction and solid-state NMR methods, indicates that the LiAl(BH4)2Cl2 phase adopts a unique 3D framework and crystallizes in an orthorhombic structure with the space group C2221, a = 11.6709(6) Å, b = 8.4718(4) Å, c = 7.5114(3) Å. The material shows excellent dehydrogenation characteristics, where hydrogen evolution starts at Tons = 70 °C, releasing approximately 2 wt.% of nearly pure (99.8 vol.%) hydrogen and a very small amount (~0.2 vol.%) of diborane. When compared to halide-free mixed alkali metal–aluminum borohydrides, the presence of Al‒Cl bonding in the LiAl(BH4)2Cl2 structure likely prevents the formation of Al(BH4)3 upon decomposition, thus suppressing the formation of diborane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydrogen Storage in Partially Exfoliated Magnesium Diboride Multilayers

Metal boride nanostructures have shown significant promise for hydrogen storage applications. However, the synthesis of nanoscale metal boride particles is challenging because of their high surface energy, strong inter- and intraplanar bonding, and difficult-to-control surface termination. Here, it is demonstrated that mechanochemical exfoliation of magnesium diboride in zirconia produces 3-4 nm ultrathin MgB 2 nanosheets (multilayers) in high yield. High-pressure hydrogenation of these multilayers at 70 MPa and 330 °C followed by dehydrogenation at 390 °C reveals a hydrogen capacity of 5.1 wt%, which is ≈50 times larger than the capacity of bulk MgB 2 under the same conditions. This enhancement is attributed to the creation of defective sites by ball-milling and incomplete Mg surface coverage in MgB 2 multilayers, which disrupts the stable boron-boron ring structure. The density functional theory calculations indicate that the balance of Mg on the MgB 2 nanosheet surface changes as the material hydrogenates, as it is energetically favorable to trade a small number of Mg vacancies in Mg(BH 4 ) 2 for greater Mg coverage on the MgB 2 surface. To conclude, the exfoliation and creation of ultrathin layers is a promising new direction for 2D metal boride/borohydride research with the potential to achieve high-capacity reversible hydrogen storage at more moderate pressures and temperatures.

08 HYDROGEN↗
DOE OSTI2024

Intercalation-Induced Topotactic Phase Transformation of Tungsten Disulfide Crystals

Recent research has demonstrated the potential for topological superconductivity, anisotropic Majorana bound states, optical nonlinearity, and enhanced electrochemical activity for transition metal dichalcogenides (TMDs) with a 2M structure. These unique TMD compounds exhibit metastability and, upon heating, undergo a transition to the thermodynamically stable 2H phase. The 2M phase is commonly made at high temperatures using traditional solid-state methods, and this metastability further complicates the growth of large 2M WS 2 crystals. Herein, a novel synthetic method was developed, focusing on a molten salt reaction to synthesize large 2H crystals and then inducing transformation to the 2M phase through intercalation and thermal treatment. The 2H crystals were intercalated via a room-temperature sodium naphthalenide solution, producing a previously unreported Na-intercalated 2H WS 2 phase. Thermal heating was required to facilitate the phase transition to the intercalated 2M crystal structure. This phase transition was studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), electron dispersive X-ray spectroscopy (EDS), and Raman spectroscopy, which confirmed the synthesis of the intercalated 2M phase. Upon deintercalation, crystal and powder samples showed superconductivity with a T c of 8.6–8.7 K, similar to previously reported values. The generality of this process was further demonstrated using alkali metal triethyl borohydride to intercalate 2H WS 2 and produced the desired 2M phase. This novel synthetic method has broad implications for discovering metastable phases in other TMD families and layered materials. Furthermore, separation of the intercalation and phase transition also has the potential to allow for large-scale synthesis of this technologically important phase with greater control over each step of the reaction.

36 MATERIALS SCIENCE↗