SEARCH · Search NASA

Results for “methane (CH4) reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Temperature Inhibition of Plasma-Driven Methane Conversion in DBD Systems

Low-temperature non-thermal plasmas produce highly reactive chemical environments made up of electrons, ions, radicals, and vibrationally excited molecules. These reactive species, when combined with catalysts, can help drive thermodynamically unfavorable chemical reactions at low temperatures and atmospheric pressure. The conversion of methane (CH 4 ) to produce other value-added chemicals is a good model system because of its applicability to a wide range of industries. To effectively create these plasma catalytic systems, a fundamental understanding of the plasma-phase chemistry alone is imperative. While there have been many studies on methane plasmas and how certain operating conditions (i.e., gas composition and power) affect the plasma, there is limited understanding on how changing bulk reaction temperature affects the plasma properties and ensuing plasma chemistry. Here, in this work, we use a dielectric barrier discharge to investigate the effects of temperature on the reaction chemistry and the plasma’s electrical properties in various methane-gas mixtures. Results show that increasing temperature leads to a reduction in methane conversion as well as changes to both the gas and dielectric material pre-breakdown, which manifests itself in temperature-dependent electrical properties of the plasma. Experiments at various temperatures and power show a positive correlation between key electrical plasma properties (average charge and lifetime per filament) and the measured methane conversion as a function of temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Microwave Absorbing Perovskite Catalysts for Efficient Electrification of Syngas Production from CO2 and Methane

Microwave absorbing catalysts have the potential to make thermal reactions such as methane reforming (CH4 + CO2 + H2O → H2 + CO) into carbon negative processes when coupled with decarbonized electricity. Due to microwaves directly heating the catalyst rather than heating the reactor and gases, even high temperature reactions such as dry reforming methane (DRM, CH4 + CO2 → H2 + CO) can be achieved rapidly, efficiently, and on-demand, ideal for coupling with intermittent renewable electricity. However, microwave catalysts present unique design challenges due to the same material needing to both efficiently absorb microwaves in oxidative and reductive reaction conditions and be an efficient and stable catalyst in inherently non-isothermal reactors. We screened from over 28 catalysts in the La0.8Sr0.2(Co-Ni-Mn)O3 perovskite solid-solution family to determine promising microwave reforming catalysts and identify design principles for effective materials. The best performing catalyst candidate was able to produce syngas ratios (H2:CO) from 1-3, and scale up testing showed CO and H2 production efficiencies rivaling conventional carbon intensive steam reforming efficiencies at the liters per minute level of production.

Marin, Christopher↗

DOE OSTI2021

Catalytic Reduction of Residual Oxygen for the Purification of Carbon Dioxide Streams from Pressurized Oxy-Combustors

Pressurized oxy-combustion (OC) is regarded as an energy-efficient alternative to atmospheric OC. To utilize the captured carbon dioxide (CO2) from pressurized OC for enhanced oil recovery or carbon storage in geological formations, the CO2 product stream must meet the required purity specifications. One major impurity in OC flue gases is residual O2 (e.g., 3 vol%). In this study, a catalytic approach has been investigated to remove the residual O2 through a reduction reaction with injected methane (CH4) in a reverse-flow fixed-bed (RFFB) reactor. The performance was tested for a supported copper (Cu)-based catalyst synthesized by incipient wetness impregnation and a cobalt-manganese (CoMn) oxide catalyst synthesized by a coprecipitation method. A commercial Cu-based catalyst was also studied as the reference. Experimental results revealed that under the reverse-flow operation, the temperature profiles in the reactor were symmetrical on both sides of the catalyst zone and were more homogenous than those under the conventional one-direction-flow operation. Among the tested catalysts, the CoMn catalyst was the most reactive for promoting the reduction of O2 with CH4, able to attain >95% O2 removal at 475 °C and a gas hourly space velocity (GHSV) of 18,000 h-1 with a feed gas containing 3 vol% O2. Under all experiments, the concentrations of carbon monoxide (CO) were lower than 30 ppmv in the effluent gas streams. The reaction between O2 and CH4 could be depicted by using the Mars–van Krevelen redox mechanism based on a two-step reduction–oxidation reaction pathway.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Microwave-Assisted Hydrogen Generation from Hydrocarbon-Bearing Reservoir Rocks: Stage-Dependent Thermal Runaway and In-Situ Carbonate Engineering

Microwave-assisted hydrogen generation from hydrocarbon-bearing reservoir rocks is strongly influenced by mineralogy, methane activation, carbonate reactions, and thermal runaway behavior. This study investigates a new approach in which carbonate phases are generated in-situ through the reaction of internally produced CO2 with Ca(OH)2 under microwave heating conditions. The objective is to evaluate how rock mineralogy, methane injection, and Ca(OH)2 addition influence hydrogen generation, carbon redistribution, and stage-dependent reaction pathways during microwave exposure. Microwave heating experiments were conducted using Permian Basin reservoir rocks under three experimental conditions: rock-only experiments under Ar atmosphere, CH4–Ar experiments without additive, and CH4–Ar experiments containing 5 wt% Ca(OH)2. Methane-assisted experiments were performed under continuous injection of 30 standard cubic centimeters per minute (sccm) CH4 and 30 sccm Ar. Based on thermal runaway behavior, each experiment was divided into three operational stages: Before Thermal Runaway (BR), After Thermal Runaway–Decrease in Microwave Power (ARD), and After Thermal Runaway– Increase in Microwave Power (ARI). Temperature and gas composition were continuously monitored throughout the experiments. The rock-only experiments demonstrated that hydrogen generation can occur intrinsically from hydrocarbon-bearing rocks under microwave heating, even without externally injected methane. However, hydrogen production did not correlate solely with kerogen content, indicating that mineralogy strongly influences hydrogen-generation pathways. Correlation analyses suggested that kerogen decomposition initially generated CH4, CO, and CO2, followed by secondary hydrocarbon reactions associated with H2 and C2 hydrocarbon formation. Methane-assisted experiments substantially increased hydrogen production; however, identical methane injection rates produced significantly different hydrogen yields among the rock samples, confirming that mineralogical composition controls methaneconversion behavior under microwave heating conditions. The addition of Ca(OH)2 significantly altered carbon evolution behavior in a stage-dependent manner. During the BR stage, Ca(OH)2 reduced gas-phase CO2 production, particularly in carbonate-rich rocks, indicating favorable conditions for in-situ carbonation and carbonate deposition prior to extensive thermal decomposition. The suppression of CO2 during BR became more pronounced with increasing carbonate content of the rock system. After thermal runaway, carbonate-containing systems exhibited enhanced hydrogen generation behavior, suggesting that carbonatederived mineral transformations and carbonate-mediated reactions contribute to high-temperature hydrogen-generation pathways. In carbonate-poor rocks, Ca(OH)2 addition enabled simultaneous URTeC 4493775 2 enhancement of hydrogen production and partial suppression of CO2 release during the post-runaway stages. Overall, the results demonstrate that microwave-assisted hydrogen generation is governed by dynamically evolving interactions among kerogen decomposition, methane activation, mineral transformations, carbonate formation/decomposition, and thermal runaway behavior. This work introduces in-situ carbonate engineering with Ca(OH)2 as a strategy for coupling hydrogen generation with partial insitu carbon management under microwave heating conditions.

03 NATURAL GAS↗

DOE OSTI2021

Rhodium Single–Atom Catalysts on Titania for Reverse Water Gas Shift Reaction Explored by First Principles Mechanistic Analysis and Compared to Nanoclusters

The thermocatalytic reduction of CO2 by H2 often proceeds via two competing reaction mechanisms—the reverse water gas shift reaction (rWGSR, CO2 + H2 ⇌ CO + H2O) and methanation (CO2 + 4H2 ⇌ CH4 + 2H2O). Atomically dispersed Rh1 catalysts on TiO2 show high selectivity toward the rWGSR compared with larger Rh nanoclusters, but the origin of this size-dependent selectivity has not been fully explained. Here we report density functional theory (DFT) calculations and microkinetic simulations that clarify the Rh1 active sites and rWGSR pathway on anatase TiO2(101), as well as the high rWGSR selectivity of Rh1 compared with supported Rhx (x = 2–8 atoms) nanoclusters. DFT-computed formation energies, vibrational frequency analysis, and microkinetic modeling suggest three plausible active sites: Rh1 on titania (Rh1/TiO2(101)), Rh1 with a nearby hydroxyl group (Rh1OH/TiO2(101)), and Rh1 near an oxygen vacancy at a three-fold coordinated site (Rh1 near O3cvac). Predicted turnover frequencies and apparent activation barriers for Rh1 indicate a faster reaction involving CO2 dissociation assisted by a support oxygen vacancy via Rh1 near O3cvac, as well as slower reactions involving Rh1OH/TiO2(101) or Rh1/TiO2(101) through a COOH intermediate. Furthermore, these Rh1 sites are selective toward CO rather than CH4 because of the weak adsorption of CO, large barrier for C-O bond dissociation, and the lack of nearby metal sites for H2 dissociation, in contrast to Rhx nanoclusters, including Rh2 dimers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Effect of Fe on Co-Based SiO2Al2O3 Mixed Support Catalyst for Fischer–Tropsch Synthesis in 3D-Printed SS Microchannel Microreactor

This research explores the effect of a composite support of SiO2 and Al2O3 with Fe and Co incorporated as catalysts for Fischer–Tropsch synthesis (FTS) using a 3D-printed stainless steel (SS) microchannel microreactor. Two mesoporous catalysts, FeCo/SiO2Al2O3 and Co/SiO2Al2O3, were synthesized via a one-pot (OP) method and extensively characterized using N2 physisorption, XRD, SEM, TEM, H2-TPR, TGA-DSC, FTIR, and XPS. H2-TPR results revealed that the synthesis method significantly affected the reducibility of metal oxides, thereby influencing the formation of active FTS sites. SEM-EDS and TEM further revealed a well-defined hexagonal matrix with a porous surface morphology and uniform metal ion distribution. FTS reactions, carried out in the 200–350 °C temperature range at 20 bar with a H2/CO molar ratio of 2:1, exhibited the highest activity for FeCo/SiO2Al2O3, with up to 80% CO conversion. Long-term stability was evaluated by monitoring the catalyst performance for 30 h on stream at 320 °C under identical reaction conditions. The catalyst was initially active for the methanation reaction for up to 15 h, after which the selectivity for CH4 declined. Correspondingly, the C4+ selectivity increased after 15 h of time-on-stream, indicating a shift in the product distribution toward longer-chain hydrocarbons. This trend suggests that the catalyst undergoes gradual activation or restructuring under reaction conditions, which enhances chain growth over time. The increase in C4+ products may be attributed to the stabilization of the active sites and suppression of methane or light hydrocarbon formation.

Biochemistry & Molecular Biology↗

DOE OSTI2022

A Novel Process for Carbon Dioxide Conversion to Fuel

In this project, TDA developed a new mixed metal oxide-based sorbent that converts CO2 (captured from coal fired power plants) to CO, which can then be combined with renewable H2 generated by water electrolysis or H2 from steam methane reforming to produce different liquid fuels. TDA’s absorbent-based CO2 conversion process uses a redox process, which splits the catalytic reforming of methane with CO2 reaction into two stages: CO2 reduction to CO and CH4 reforming into H2 and CO which eliminates the equilibrium limitations. The CO produced in the two-stage reactor system can then be further reacted with renewable H2 to produce methanol, naphtha, diesel, or gasoline. We worked with the Advanced Power & Energy Program (APEP) of University of California, Irvine (UCI) to design and develop the liquid fuel synthesis process that is built around this new material. We demonstrated the techno-economic viability of the new sorbent based redox process to convert CO2 into synthesis gas by demonstrating continuous carbon dioxide reduction in a prototype test system for over 585 hours while converting up to 10 kg CO2/day. With the successful completion of the R&D effort, the technology is now ready for a larger pilot-scale demonstration and the technology readiness has been raised from TRL 3 to TRL 5. In collaboration with UCI, we completed a high-fidelity process design and economic analysis. The required sale price (RSP) for gasoline (Case 1 NG-MTG) is $4.91/gal and naphtha and diesel (Case 2 NG-FT) are $4.23/gal and $6.07/gal, respectively, on a 2011 dollar basis. To put these costs in perspective, the California prices in current dollars (with its strict specifications) for regular grade gasoline from last year to current year have varied from a low of $3.10/gal in January 2021 to a high of $5.76/gal in March 2022, while prices for diesel from last year to current year have varied from a low of $3.40/gal in January 2021 to a high of $6.41/gal in May 2022 according to the U.S. Energy Information Agency data. It should be noted that the gasoline and diesel produced by these designs of Case 1 and Case 2 would be of very high quality and both nitrogen and sulfur free. These RSPs are based on a cost of imported electricity of $64/MWh based on the low-end current wind generated electricity cost (Genevieve 2011). This cost is by far the largest component of the variable costs used in computing the RSPs. A sensitivity analysis of these RSPs to the cost of imported electricity shows that the cost of the imported electricity has a significant effect on the RSPs. The life cycle analysis (LCA) shows that the total cradle-to-gate CO2 emissions for both liquid fuels (diesel and gasoline) were negative, indicating that overall more CO2 is consumed than released during production of the fuel from CO2 feed stack for both cases (-296 kgCO2 per MT gasoline for Case 1 and -705 kgCO2 per MT diesel for Case 2). On a cradle-to-grave comparison, the use of diesel produced using TDA’s process (2,457 kgCO2 per MT diesel) would release 37.6% less CO2 compared to petroleum based diesel (3,937 kgCO2 per MT diesel) while the use of gasoline produced using TDA’s process (2,792 kgCO2 per MT gasoline) would release 29.3% less CO2 compared to petroleum based gasoline (3,946 kgCO2 per MT gasoline). With the successful completion of the R&D effort, the technology is now ready for a bench-scale demonstration and the technology readiness has been raised from TRL 3 (Analytical and experimental critical function and/or characteristic proof of concept) to TRL 5 (Laboratory scale similar system validation in relevant environment).

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2021

Effects of non-thermal termolecular chemistry on detonation development in hydrogen (H2) / methane (CH4) - air mixtures

In combustion simulations, it is usually assumed that highly-energized collision complexes (either radical or stable species) formed in exothermic reactions are always under thermal equilibrium as they evolve through competing networks of reactions. However, in practical flames, non-trivial amounts of reactive radicals such as H, O and OH are present apart from O2. As a result, collisions of these reactive species with the energized collision complexes have been shown in recent studies to induce non-thermal reactivity. These studies have also demonstrated that such non-thermal reactions can be suitably represented in macroscopic kinetics models as chemically termolecular reactions. The present work was focused on identifying and quantifying the effects of including such reactions on the evolution of an initial deflagration front to a developing detonation in H2/CH4-air mixtures under boosted internal combustion (IC) engine conditions. Specifically, fully resolved simulations, with and without non-thermal reactivity, were performed for a constant volume reactor containing stoichiometric H2/CH4-air mixture. It was found that inclusion of termolecular chemistry resulted in a delayed onset of end-gas auto-ignition. Concurrently, the developing detonation intensity was observed to be significantly higher. Chemical explosive mode analysis (CEMA) was performed to identify the dominant species/reactions responsible for the observed variation in the results.

Detonation↗

DOE OSTI2024

Geochemical and Microbial Dynamics of Hydrogen in a Methane Storage Reservoir

Hydrogen has been identified as a flexible energy carrier with zero or negative emission across multiple energy systems, and existing natural gas infrastructure could be leveraged if hydrogen gas (H2) was blended with methane (CH4). For example, subsurface methane storage reservoirs could be slightly modified to also store hydrogen if a methane/hydrogen blend were injected. However, the compatibility of methane storage reservoirs to include H2 injection has not been fully demonstrated, and this could lead to geochemical and microbiological reactions that alter the reservoir and stored gas content. It is essential that we understand the impact of H2 gas on the biogeochemistry of subsurface storage reservoirs before deploying large-scale H2-CH4 storage, We collected produced fluid from two separate methane storage reservoirs in the Southwestern US. First, we completed a baseline analysis of the biogeochemistry through qPCR, 16S rRNA sequencing, metagenomic sequencing, and geochemical analysis. Each reservoir was found to have unique geochemical conditions and a unique microbial community structure, with Site 1 having a higher TDS and an abundance of Shewanella and Site 2 having a lower TDS and high abundance of Eubacterium and Acetobacterium. Next, we ran a series of high pressure, high temperature reactors under hydrogen storage conditions with the biological sample from one of the storage reservoirs and a 20% H2-80% CH4 gas blend for up to 7 days. Our results show a decrease of hydrogen by 5% in reactors as early as 1-3 days. Previous hydrogen storage work has linked subsurface microorganisms with methanogenesis hydrogen sulfide production, acid production, and microbial corrosion. Our results show minimal change in the fluid chemistry, with the exception of a decrease in dissolved sulfate concentrations. Taxonomic sequencing demonstrated the presence of microorganisms capable of iron redox, acid generation, and hydrogen sulfide production throughout the reactors, suggesting microbial hydrogen consumption may occur through various metabolic pathways. This work demonstrates that site-specific geochemistry and microbiology may impact the efficiency of hydrogen storage in methane storage reservoirs.

environmental microbiology↗

DOE OSTI2020

Enhanced activity and stability of MgO-promoted Ni/Al 2 O 3 catalyst for dry reforming of methane: Role of MgO

Highly dispersed nickel nanoparticles (NPs) were deposited on Al 2 O 3 NPs by atomic layer deposition (ALD). Various amounts of MgO were loaded on Ni/Al 2 O 3 catalysts by the incipient wetness (IW) method for dry reforming of methane. Fresh and used catalysts were systematically characterized to reveal the effects of MgO on the catalytic performance. MgO was found to increase the basic amount and basic strength of catalyst surfaces, which provided additional surface oxygen species and assisted the adsorption and activation of CO 2 . Although the formation of NiO-MgO solid solution, during the calcination of incipient wetness, did not improve the overall reducibility, the Ni NPs from NiO-MgO solid solution after reduction formed an intimate interaction with MgO, which could inhibit Ni NPs from sintering and provide sufficient metal-support interface for CO 2 activation. The MgO-promoted Ni/Al 2 O 3 reached a methane reforming rate of 1780 L CH4 g Ni -1 h -1 at 850 °C, which is 26% more than that of the pristine Ni/Al 2 O 3 . Finally, the higher CO 2 activity enhanced the oxidation rate of the surface carbon generated from side-reactions, thereby resulting in a higher reforming rate and inhibiting coke formation, especially the detrimental graphitic encapsulating carbon on the active nickel surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

CH 4 Activation over Perovskite Catalysts: True Density and Reactivity of Active Sites

The high thermal stability of perovskites has drawn attention toward their applications for catalytic CH 4 activation and conversion, typically occurring at high temperatures. The reaction rates of perovskite catalysts for CH 4 combustion, however, trail behind those of noble metal catalysts. Ways to optimize the performance of perovskite catalysts are destined to trial-and-error approaches unless their complex reconstructed surfaces are correlated with fundamental kinetic parameters. Discerning the intrinsic activity of surface catalytic sites and the density of those sites is crucial to rationally envision complex metal oxides with enhanced catalytic performance. Here, the present work presents a detailed kinetic analysis of catalytic CH 4 combustion over a set of seven perovskites (SrTiO 3 , SrZrO 3 , SrFeO 3 , LaFeO 3 , LaInO 3 , LaCoO 3 , LaMnO 3 ) with various surface terminations. Steady-state isotopic transient kinetic analysis was employed to measure turnover frequency (TOF) and density of surface intermediates (N) under operando conditions. Top surface characterization elucidated performance-structure relationships between near-monolayer surface composition and intrinsic reactivity of the catalysts. By using a chemical etching procedure to expose Fe-sites at the top surface of LaFeO 3 (LaFeO 3 , HNO 3 ), its TOF was increased 4-fold, compared with the unmodified sample, although N on the surface of LaFeO 3 , HNO 3 decreased. Density functional theory simulations corroborated that surface Fe-termination and La-Fe termination offer lower energetic barriers for CH 4 activation when compared with La-termination. In general, surface reconstruction is shown as a tool to tune TOF and N to improve reaction rates. This work fills a gap in current kinetic studies of perovskites through a careful assessment and discussion of the density and intrinsic reactivity of active sites for methane combustion over well-characterized reconstructed perovskite surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Kinetics of Hydrogen Generation from In-Situ Methane Pyrolysis: Enhanced by Electromagnetic Heating and Natural Catalysts of Reservoir Rocks

Catalytic pyrolysis of methane (CH4) is a promising approach to generate hydrogen (H2). The apparent activation energy of this process has a significant influence on the efficiency and required temperature for H2 generation. Preliminary experiments indicate that minerals present in shales have catalytic effects during in-situ H2 generation from shale reservoirs under electromagnetic (EM) heating. However, the quantitative role of such natural catalysts on apparent activation energy is not explored yet. This research evaluated the role of reservoir rock (shale) in EM heating and on the apparent activation energy of methane pyrolysis (MP) for in-situ H2 generation. Experiments are conducted in a customized EM reactor with frequency 2.45 GHz, and reaction temperature and generated gases are measured by a real-time IR pyrometer and gas analyzer, respectively. It is found that shale samples experienced thermal runway (TR) at 420 ºC under 0.15 kW EM power without any artificial heating promoter. In the presence of spent shale, CH4 conversion started approximately at 600 ºC with negligible amount of carbon dioxide (CO2) generated during this process. We further calculated apparent reaction order and apparent activation energy for MP process in the presence of shale under EM heating, which are 0.4357 and 98.12 kJ/mol, respectively. This research paves a way for leveraging the role of minerals as natural catalysts for enhancing H2 generation under EM heating in petroleum reservoirs.

02 PETROLEUM↗

DOE OSTI2025

Influence of Mo- and Ga-Supported HZSM-5 Co-Catalyst Configuration in Microwave-Assisted Methane and Ethane Dehydroaromatization

Microwave (MW)-assisted dehydroaromatization (DHA) using an Mo-supported HZSM-5 catalyst (Mo/HZSM-5) enhances the value of natural gas resources by converting stranded or underutilized natural gas into value-added chemicals in modular microwave reactor systems. This approach offers the potential to generate economic value. However, natural gas mixtures often contain multiple components, including ethane (C2H6) and propane (C3H8), which complicate the reaction pathways. Ga-supported HZSM-5 (Ga/HZSM-5) catalysts are generally inactive toward CH4 but exhibit higher activity toward C2H6 and C3H8. Therefore, investigating the combination of Mo/HZSM-5 and Ga/HZSM-5 in various catalyst bed configurations is essential. This study explores different co-catalyst bed configurations and CH4/C2H6 feed compositions to determine the most effective way for enhanced natural gas conversion and benzene production.

cocatalyst bed configuration↗

DOE OSTI2023

Carbon-Assisted, Continuous Syngas Production in a Chemical Looping Scheme

In the current energy and environment scenario, it is imperative to develop energy efficient routes for chemical manufacturing that also pave the way for mitigation of greenhouse gas emissions. This work presents an efficient pathway for continuous syngas production via a chemical looping conversion of the two most potent greenhouse gases—CH 4 , and CO 2 . The well-known dry-reforming process of converting CH 4 , and CO 2 to syngas is energy-intensive and suffers from catalyst deactivation. The chemical looping approach, on the other hand, provides avenues for mitigating catalyst deactivation and enabling improved energy efficiency. The key to such process enhancements lies in the intricate structure–function relationships of the catalyst and its correlation to the process variables. We present the reduction and oxidation characteristics of 5 wt.% Ni/Ce 1-x Zr x O 2 -based catalysts (x = 0, 0.4, and 0.625). We demonstrate low temperature CH4 activation over Ni-promoted samples as opposed to pure Ce 1-x Zr x O 2 . Moreover, our results depict an optimum regeneration of these catalysts when oxidized by CO 2 , and H 2 O, which allows for chemical looping operation of steam reforming of methane as well. Process variables were tuned to optimize the CH 4 conversion (over 80%), and H 2 /CO ratio at 650 °C. The critical surface reactions—carbon accumulation and gasification, and thermocatalytic CO 2 splitting were investigated to elucidate the dynamic nature of the catalyst surface. In conclusion, the impact of this work lies in showcasing the opportunities to design chemical looping reactors for energy efficient syngas production from waste greenhouse gases.

25 ENERGY STORAGE↗

DOE OSTI2023

Chemical looping conversion of CH4/CO2 to syngas on 5wt.%Ni@Ce0.6Zr0.4O2 catalyst: Impact of dynamic accumulation of surface carbon and oxygen vacancies

Syngas, a combination of carbon monoxide (CO) and hydrogen (H2), is a precursor to many chemicals and fuels, contributing to the billion-dollar global hydrocarbon industry. Chemical looping reforming (CLR) of the greenhouse gases methane (CH4) and carbon dioxide (CO2) allows for energy-efficient production of syngas. 5wt.% nickel (Ni) on ceria-zirconia (5wt%Ni@Ce0.6Zr0.4O2) mixed metal oxide catalyst was investigated here to explore pathways for enhanced syngas production on sustainable earth-abundant transition metal supported catalysts. The role of reduction-oxidation (redox) state of the catalyst, and carbon formation on the catalyst surface during chemical looping is explored to drive superior reaction kinetics, conversions, selectivity, and syngas ratios (H2/CO). The bulk and surface structure of the catalyst, along with carbon deposition features were characterized by electron microscopy, X-Ray diffraction, and ex situ Raman spectroscopy. The dynamic evolution of catalysts under CLR reaction conditions and the intrinsic reaction mechanisms were probed with in situ Raman spectroscopy, in situ Fourier transform spectroscopy, dynamic oxygen storage capacity (DOSC), and the Temporal Analysis of Products (TAP) reactor studies. Intrinsic kinetics of syngas production via CLR was correlated to the redox state of catalyst and the participation of nickel-catalyzed multiwalled carbon nanotube (CNT) growth, allowing enhanced CLR reaction performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2021

Catalytic decomposition of methane into hydrogen and high-value carbons: combined experimental and DFT computational study

Thermocatalytic decomposition (TCD) of methane can produce hydrogen and valuable nanocarbon co-products with low to near-zero CO2 emission. In this study, a series of Pd promoted Ni catalysts, prepared with various Ni/Pd ratios on a CNT support, were evaluated for methane TCD performance. Characterization and calculations using density functional theory (DFT) were carried out to elucidate the activity–structure relationship and growth mechanism of carbon nanomaterials. It was found that the methane conversion and stability of the catalysts were highly dependent on the Ni/Pd ratio and reaction temperature. DFT calculations revealed that the diffusion of carbon in the metal sublayer required for CNT growth was more favorable in the Ni–Pd alloy lattice suggesting that the buildup of carbon in the metal alloy sublayer facilitated the formation of CNTs and CNFs. A cyclic reaction–regeneration process for self-sustained TCD was experimentally demonstrated. In each cycle, a portion of the separated CNT product was used to re-synthesize the Ni–Pd/CNT catalyst for use in the next reaction cycle. After five cycles of operation, the CH4 conversion, morphology and crystallinity of the carbon product remained unchanged.

Wang, I-Wen↗

DOE OSTI2023

Simulation of Methane Oxycombustion in Supercritical Carbon Dioxide

The Allam-Fetvedt Cycle (AFC) offers the potential for electricity generation with minimal or even negative carbon emissions by using oxycombustion in supercritical carbon dioxide (sCO2). Because of the extreme high temperatures and pressures encountered in these systems, simulation of oxycombustion requires use of a complex equation of state such as the modified Soave-Redlich-Kwong (SRK) equation, coupled with equally complex correlations for transport properties. The current work simulates a model combustor using both an ideal gas equation of state and the SRK equation of state. The model combustor features a jet of CH4 mixing with and reacting with O2 in the sCO2 ambient. Two jet configurations are considered: one of pure CH4, and one of CH4 mixed with sCO2. Comparison of results shows that key output properties such as combustor temperature and flow distribution are impacted by the choice of equations of state. Inspection of simulation results shows that mixing and reaction rates, as well as the uniformity of the flow, are impacted by the choice of equation of state. These results show that even though use of a complex equation of state greatly increases the computational costs of these simulations, it is critical to accurately capturing the physics of these systems.

computational fluid dynamics↗

DOE OSTI2025

Ligation of Single-Site Ruthenium within Perovskite Oxides for Efficient Conversion of Thermodynamically Stable Molecules

Ru cation ligation in SrTiO 3 perovskite and their migration to the surface through exsolution are investigated for the dry reforming of methane (DRM), a chemistry that requires activation of two thermodynamically stable molecules, CH 4 and CO 2 . Compared to a supported 1 wt % Ru/SrTiO 3 benchmark, doped and exsolved Ru-SrTiO 3 demonstrate ≥3× higher CH 4 turnover rates (873 K), with isolated, ligated Ru exhibiting higher reactivity. Reactor studies assert that CH 4 and CO 2 activation are both kinetically relevant for CH 4 turnover rates on exsolved Ru-SrTiO 3 , unlike for supported Ru systems, where H-abstraction from CH 4 is the sole kinetically relevant step. As such, exsolved and doped Ru architectures are responsive toward co-reactant activation strategies, with their consequent reaction networks showing marked departures from those established for supported Ru catalysts. In situ spectroscopy and kinetic analyses propose distinct sensitivity toward CO 2 on Ru-SrTiO 3 systems, where higher CH4 turnover rates result from O-assisted C─H bond activation pathways. These pathways occur on paired Ru-oxygen vacancy sites that are inherent to the perovskite structure and are not readily accessible on supported Ru catalysts. Here, CO 2 is activated on oxygen vacancies directly adjacent to Ru active sites, which facilitates CH 4 C─H bond activation through a surface methoxy intermediate. The high reactivity of Ru-SrTiO 3 systems enables stable CH 4 turnover rates at milder reaction temperatures (673 K), conditions under which the supported counterpart, Ru/SrTiO 3 , is inactive. Overall, this work demonstrates that ligation of catalytically active cations in perovskite oxides facilitates site engineering toward atom-efficient activation of thermodynamically stable feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗