Search NASA⌕ Search

SEARCH · Search NASA

Results for “methods in magnetism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

On ultrafast x-ray scattering methods for magnetism

With the introduction of x-ray free electron laser sources around the world, new scientific approaches for visualizing matter at fundamental length and time-scales have become possible. As it relates to magnetism and ‘magnetic-type’ systems, advanced methods are being developed for studying ultrafast magnetic responses on the time-scales at which they occur. We describe three capabilities which have the potential to seed new directions in this area and present original results from each: pump-probe x-ray scattering with low energy excitation, x-ray photon fluctuation spectroscopy, and ultrafast diffuse x-ray scattering. By combining these experimental techniques with advanced modeling together with machine learning, we describe how the combination of these domains allows for a new understanding in the field of magnetism. Finally, we give an outlook for future areas of investigation and the newly developed instruments which will take us there.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Large Area Transfer of Bismuth‐Based Layered Oxide Thin Films Using a Flexible Polymer Transfer Method

Magnetic and ferroelectric oxide thin films have long been studied for their applications in electronics, optics, and sensors. The properties of these oxide thin films are highly dependent on the film growth quality and conditions. To maximize the film quality, epitaxial oxide thin films are frequently grown on single-crystal oxide substrates such as strontium titanate (SrTiO 3 ) and lanthanum aluminate (LaAlO 3 ) to satisfy lattice matching and minimize defect formation. However, these single-crystal oxide substrates cannot readily be used in practical applications due to their high cost, limited availability, and small wafer sizes. One leading solution to this challenge is film transfer. In this demonstration, a material from a new class of multiferroic oxides is selected, namely bismuth-based layered oxides, for the transfer. A water-soluble sacrificial layer of Sr 3 Al 2 O 6 is inserted between the oxide substrate and the film, enabling the release of the film from the original substrate onto a polymer support layer. The films are transferred onto new substrates of silicon and lithium niobate (LiNbO 3 ) and the polymer layer is removed. These substrates allow for the future design of electronic and optical devices as well as sensors using this new group of multiferroic layered oxide films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Transfer of Millimeter‐Scale Strained Multiferroic Epitaxial Thin Films on Rigid Substrates via an Epoxy Method Producing Magnetic Property Enhancement

The demonstration of epitaxial thin film transfer has enormous potential for thin film devices free from the traditional substrate epitaxy limitations. However, large-area continuous film transfer remains a challenge for the commonly reported polymer-based transfer methods due to bending and cracking during transfer, especially for highly strained epitaxial thin films. In this work, a new epoxy-based, rigid transfer method is used to transfer films from an SrTiO 3 (STO) growth substrate onto various new substrates, including those that will typically pose significant problems for epitaxy. An epitaxial multiferroic Bi 3 Fe 2 Mn 2 O x (BFMO) layered supercell (LSC) material is selected as the thin film for this demonstration. The results of surface and structure studies show an order of magnitude increase in the continuous area of transferred films when compared to previous transfer methods. The magnetic properties of the BFMO LSC films are shown to be enhanced by the release of strain in this method, and ferromagnetic resonance is found with an exceptionally low Gilbert damping coefficient. The large-area transfer of this highly strained complex oxide BFMO thin film presents enormous potential for the integration of many other multifunctional oxides onto new substrates for future magnetic sensors and memory devices.

bismuth oxides↗
DOE OSTI2024

Sintering-based Metal Additive Manufacturing Methods for Magnetic Materials

In this chapter, we review the relationship between solid-state sintering and additive manufacturing (AM) methods for fabricating soft and hard magnetic materials. Heat treatment as a post-processing method has been done in conjunction with AM as a method to improve density and/or mechanical properties. In binder jetting (BJT) of metal powders, sintering is a crucial post-processing step and is necessary for obtaining the final product. This is because the parts are only in the “green” state when they leave the BJT printer, with poor mechanical properties and high porosity. Sintering densifies and strengthens the green part into the final product. A potential industrial application for sintering-based AM is the fabrication of magnetic materials. The motivation for doing so, the process and properties of the AM magnets, and the potential applications of post-sintered AM magnets are explored.

Wang, Haobo↗
DOE OSTI2024

Systems and methods for additive manufacturing magnetic solenoids

Systems and methods for forming a magnetically-enabled part via additive manufacturing. The method includes depositing a layer of additive manufacturing material on a build plate, melting or sintering the layer of additive manufacturing material, depositing additional layers of additive manufacturing material on previous layers of additive manufacturing material, the additive manufacturing material of at least some of the additional layers being magnetically permeable, and melting or sintering the additional layers of additive manufacturing material such that the magnetically-enabled part has a transition region including at least some of the magnetically permeable additive manufacturing material.

Hatch, Jonathan Douglas↗
DOE OSTI2024

Structure and tunable temperature coefficient of magnetization of Mn 4-x Ga x C alloys prepared by induction melting method

The magnetization of most magnetic materials decreases monotonically with increasing temperature. In this work, we found that the temperature coefficient of magnetization of Mn 4-x Ga x C alloys can be tuned from negative values to positive values by controlling the composition x. The antiperovskite type Mn 4-x Ga x C (0.05 ≤ x ≤ 0.75) alloys were prepared by using induction melting method, which is more efficient in large-scale production and obtaining full-density alloys in comparison with the traditional solid-state-reaction method. The values of the temperature coefficient of magnetization of Mn 4-x Ga x C change continuously from negative to positive with decreasing x. The Mn 4-x Ga x C alloys with highly thermal-stable magnetization is expected to present in the composition range of 0.15 < x < 0.25. The saturation magnetization of Mn 4-x Ga x C increases with increasing x, owing to the reduced number of antiferromagnetically coupled Mn atoms at the cubic corner with the face centered Mn atoms. Most Mn 4-x Ga x C alloys with varying x display near-zero remanent magnetization and coercivity at room temperature. The Currie temperature of Mn 4-x Ga x C decreases with increasing x. The x-ray photoelectron spectra of Mn 2p, Ga 2p, and C 1 s reveal distinct splitting due to the diverse chemical states of these atoms at different lattice positions and/or phases. Our work has developed a class of alloys capable of offering a desired temperature coefficient of magnetization across a broad temperature range, thereby offering a method to manipulate the thermodynamics of magnetization.

Magnetic properties↗
DOE OSTI2025

A TOpographic Mapping (ATOM) Method to Design Magnetic Cores

Wireless power transfer offers safe, convenient, and efficient way of charging electric vehicles. Ongoing research is targeting wireless charging pad design optimization; designing the magnetic component is the most important part of the coupler design because the magnetic part determines the coupling factor and efficiency. Optimizing the coil layout and geometry as well as ferrite design requires finite elements analysis based modeling and simulation for minimized core losses, maximized magnetic coupling, and minimized material use for cost-effectiveness. Although parametric finite element analysis or emerging artificial intelligence methods can generate very accurate results, simulation times are extremely long. To address this issue, this study proposes a simple, effective core design called A TOpographic Mapping (ATOM). The proposed design is based on the design of magnetic core by using the magnetic flux distribution. The thickness of the core increases with increasing magnetic flux density, forming a variable thickness core design with less material and minimized core losses compared to conventional designs. A superimposing method is used to create an optimal design for a rotational magnetic field-based system. According to simulation results, the ATOM design reduces the required material volume by 13.19% and yields the lowest core loss and highest mutual inductance compared to other designs. In addition, misalignment, electromagnetic interference, and thermal performance were evaluated for the proposed design.

Aydin, Emrullah [Oak Ridge National Laboratory (OR↗
DOE OSTI2025

A Mössbauer Spectroscopy Investigation of Nickel‐Zinc Ferrites Synthesized by a Self‐Combustion Method for Soft Magnetic Core Applications

Soft ferrites are materials of interest for magnetic cores, as used for wireless charging transformers. Their low permeabilities, high resistivity, and magnetic polarization make them interesting for high-power electric vehicle charging and drive systems. The nickel-zinc-doped ferrites are of particular interest; however, the compositional space is quite large with respect to dopant concentrations, stoichiometric ratios and synthesis technique. Nickel-zinc spinel ferrites with varying nickel-zinc ratios prepared by a self-combustion reaction followed by heat treatment exhibit good crystallinity, and their low-temperature Mössbauer spectra show local magnetism and site occupation in agreement with materials prepared by solid-state reaction. Thus, the combustion synthesis method offers a facile tunability of compositions, which, combined with the possibility of rapid characterization of atomic-scale magnetism by Mössbauer spectroscopy, enables advances in the compositional and processing space at a fast pace. Low-temperature Mössbauer spectroscopy data for samples with increasing nickel content reveals a systematic increase in average hyperfine field (2.8 T/Ni) and decrease in average isomer shift (−0.036 mm/s/Ni) that can determine the nickel/zinc content, even in the absence of applied magnetic field data. Furthermore, a gradual evolution of color is also observed with increasing nickel content, albeit trends in color depend on sintering conditions.

Mössbauer spectroscopy↗
DOE OSTI2026

Crystal Growth of Quaternary RE 2 EuSi 2 S 8 ( RE = Ce–Nd, Sm, Gd, Tb) Using Flux-Assisted Boron Chalcogen Mixture (BCM) Method: Investigation of Magnetic and Luminescence Properties

A series of quaternary rare-earth containing thiosilicates with the general formula RE 2 EuSi 2 S 8 (RE = Ce–Nd, Sm, Gd, Tb) has been synthesized via the flux-assisted boron chalcogen mixture (BCM) crystal growth method. High-quality single crystals were obtained, and their crystal structures were determined by single-crystal X-ray diffraction. The RE 2 EuSi 2 S 8 series crystallizes in the trigonal system, adopting the space group R-3c. Polycrystalline samples were employed for physical property measurements, including magnetic susceptibility measurements, UV–visible diffuse reflectance, and photoluminescent response. Magnetic data of RE 2 EuSi 2 S 8 ( RE = Ce, Nd, and Gd) were collected over the 2–300 K temperature range. The samples were paramagnetic behavior with negative Weiss constants (θ W = −11.05, −10.55, and −1.35 K respectively). Their thermal stability was investigated using thermogravimetric analysis (TGA). Optical band gaps, estimated from diffuse reflectance spectra, were determined to be 2.2(1) eV for Ce 2 EuSi 2 S 8 , 1.8(1) eV for Nd 2 EuSi 2 S 8 , and 1.7(1) eV for Gd 2 EuSi 2 S 8 respectively. Finally, photoluminescence measurements were collected on Ce 2 EuSi 2 S 8 and Tb 2 EuSi 2 S 8 single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exploration of signal processing methods for superconducting magnet and quench data

Quenching is the phenomenon of a superconducting magnetic material carrying current transitioning into a regular conducting material. This may cause severe and irreparable damage to the superconductor due to Joule heating. The Magnet Department at Fermi National Accelerator Laboratory (FNAL) has acquired experimental data through quench antenna arrays that are recorded when the quench is detected. These data are in terms of voltage signals that are sampled at 100kHz for several minutes. There are multiple channels and each channel provides a data set of more than 20 million observations, while there is one channel, called the trigger channel which shows the time when quench is detected. Despite some advancements that were made including machine learning, data complexity still shadows the progress. In this work, we studied a multi-resolution analysis of the quench antenna data through the Haar wavelet transform. In particular, we applied the maximally overlapped discrete w avelet transform (MODWT) of a suitable level L to the given data and then projected it onto the wavelet basis. This decomposes a given signal (Original data) $x ϵ \mathbb{R}^N$ into $L + 1$ subspaces of $\mathbb{R}^N$. One of the subspaces called the approximation, captures the trend of the signal, and the others, called the details, capture the fluctuations at different frequency bands. This decomposition provides a clear trend of the data at a suitable level and also various activities (spikes) are seen in the details of the decomposition at every level. These spikes might reveal some information about the quench under investigation but in any case, give information about magnet behavior. Also, this decomposition is seen to be very useful in removing noise present in the data due to the source or mechanism of the experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Crystal Growth of Quaternary Rare Earth Selenosilicates by Using the Flux-Assisted Boron Chalcogen Mixture Method: Investigation of Their Magnetic and Optical Properties

A series of rare earth magnesium selenosilicates, RE3Mg 0.5 SiSe 7 (RE = Ce, Pr, Nd, Sm, Gd, Tb, Dy) were obtained as single crystal using the flux assisted boron chalcogen mixture (BCM) method. The structures of the crystals were determined by single-crystal X-ray diffraction. The RE3Mg 0.5 SiSe 7 series crystallizes in the hexagonal crystal system in the space group P6 3 . Polycrystalline powders were synthesized to perform physical property measurements. Magnetic measurements over the 2–300 K temperature range reveal that Ce 3 Mg 0.5 SiSe 7 and Gd 3 Mg 0.5 SiSe 7 exhibit paramagnetic behavior with negative Weiss constants (θ W = −14.50, θ W = −6.13 K, respectively). The optical properties of RE 3 Mg 0.5 SiSe 7 (RE = Ce, Pr, Nd, Sm, Gd) were measured by ultraviolet–visible (UV–vis) diffuse reflectance. Density functional theory (DFT) electronic structure calculations were performed. Furthermore, a second harmonic generation measurement was performed on a polycrystalline powder of Ce 3 Mg 0.5 SiSe 7 and was found to be SHG active with an efficiency of 0.11 times the standard potassium dihydrogen phosphate (KDP).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Magnetic Solitons in Hierarchical 3D Magnetic Nanoarchitectures of Nanoflower Shape

Curvilinear magnetism emerged as a new route to tailor properties of magnetic solitons by the choice of geometry and topology of a magnetic architecture. Here, we develop an anodized aluminum oxide template-based approach to realize hierarchical 3D magnetic nanoarchitectures of nanoflower shape. The technique provides defect-free regular arrays of magnetic nanoflowers of tunable shape with a period of 400 nm over cm 2 areas. We combined advanced magnetic imaging methods with micromagnetic simulations to study complex magnetic states in nanoflowers originating due to magnetostatics-driven symmetry break in curvilinear nanomembranes. An interaction between surface and volume magnetostatic charges in 3D curved nanoflowers leads to the stabilization of asymmetric and shifted vortices as well as states with two Bloch lines. Ordered large area arrays of complex-shaped magnetic nanoarchitectures developed in this work are relevant for prospective research on 3D magnonics and spintronics.

3D nanoarchitectures↗
DOE OSTI2024

Exact-Two-Component Complete Active Space Method with Variational Treatment of Magnetic Field and Spin–Orbit Coupling: Application to X-ray Magnetic Circular Dichroism Spectroscopy

We introduce an exact-two-component complete active space self-consistent-field (X2C-CASSCF) method formulated under the restricted-magnetic-balance condition. This framework allows for the nonperturbative treatment of static magnetic fields using gauge-including atomic orbitals (GIAOs). The GIAO-X2C-CASSCF methodology effectively captures all microstates within the same 2J + 1-degenerate manifold and their splitting in a static magnetic field, which are not accessible through single-reference-based methods. We also present mathematical recursive expressions for evaluating one-electron relativistic integrals by using GIAOs in the presence of a finite magnetic field. Benchmark studies include oxygen and nitrogen K-edge X-ray magnetic circular dichroism spectroscopy (XMCD) for closed-shell organic compounds, as well as L-edge XMCD spectroscopy for the high-spin open-shell transition metal ion Mn 2+ and the tetrahedral Mn(II)O 4 6– complex.

Chemical calculations↗
DOE OSTI2025

Modelling pulsed field magnetization of iron-based bulk superconductors

Abstract Bulk superconductors can be used as super-strength quasi-permanent magnets capable of providing magnetic flux densities considerably superior to conventional permanent magnets. This makes them attractive for several engineering applications that rely on strong magnetic fields like rotating machines, NMR/MRI and magnetic drug delivery systems. Recently, the authors reported a record trapped magnetic field in an iron-based bulk superconductor: 2.83 T was trapped in potassium-doped barium iron arsenide (Ba, K)Fe 2 As 2 (or Ba122) at 5 K. Of particular significance is that the strength and temporal stability of this magnetic field exceeds the requirements of MRI machines, indicating iron-based bulks can now perform at levels demanded by engineering applications. One crucial challenge for their practical use, however, is the need to apply and remove an external magnetic field to magnetize them. Pulsed field magnetization (PFM) shows great promise as a practical method of magnetizing bulks, but the process generates heat in the bulk that is detrimental to its superconducting performance and ability to act as a super-strength magnet. In this paper, coupled electromagnetic–thermal numerical models are used to simulate the PFM of iron-based bulk superconductors. Here we focus on the recent-record-breaking, fine-grain polycrystalline K-doped Ba122 bulks. The impact that the specific J c ( B ) characteristics and thermal properties of the Ba122 material—all of which have been experimentally measured from state-of-the-art samples—have on the magnetic flux dynamics and thermal behaviour during PFM, including the final trapped field, is investigated. We show that because the thermal properties are similar to those of REBa 2 Cu 3 O 7 −δ bulks, a similar response to pulsed fields is obtained. A maximum trapped field of ∼0.81 T (∼43.3% of the maximum trapped field capability under ideal, field-cooling conditions) was simulated at 5 K, with a magnetization efficiency of ∼54%. The modelling framework provides a fast and flexible tool for optimising the practical PFM process at different operating temperatures to maximise the trapped field in state-of-the-art Ba122 bulks and to guide the design of future experiments.

bulk superconductors↗
DOE OSTI2025

Building Datasets and Training Methods for ML Based Magnet Quench Detection

Detecting quenches in superconducting (SC) magnets during training is a challenging process that involves capturing physical events that occur at different frequencies and appear as various signal features. These events may be correlated across instrumentation type, thermal cycle, and ramp. These events together build a more complete picture of continuous processes occurring in the magnet, and may allow us to flag potential precursors for quench detection. We present our work on building an automatic machine learning (ML) based quench detection system. We build upon our existing work on unsupervised auto-encoders for acoustic sensors and quench antenna (QA) by first establishing a supervised ML training pipeline. We show the results of an event tagging, analysis, and simulation framework on our QA and acoustic data which are used concurrently to build a training dataset for a supervised implementation. We then show how this supervised training can be used as a prior in a semi-supervised framework and compare this to the unsupervised neural network auto-encoder performance.This allows us to have a more concrete understanding of the performance of our algorithms relative to physical events occurring in the magnet, and also provides a baseline software tool to generically evaluate our quench prediction autoencoders under completely unsupervised, supervised, and semi-supervised training conditions.

Khan, Maira [Fermilab]↗
DOE OSTI2025

Experimental determination of the magnetic anisotropy in five-coordinated Co( II ) field-induced single molecule magnets

Magnetic anisotropy of the central metal atom is a crucial property of single molecule magnets (SMMs). Small structural changes can alter the magnetic properties, and accurate experimental methods to investigate magnetic anisotropy are therefore critical. Here, we investigate two five-coordinated Co( II ) SMMs, [CoCl 2 Cltpy] (1) and [CoBr 2 Cltpy] (2) (Cltpy = 4′-chloro-2,2′:6′,2′′-terpyridine), through multiple techniques. Ab initio theoretical calculations performed on the two compounds show that both possess axial magnetic anisotropy with the magnetic easy axis pointing towards one of the terminal halogen atoms. Theoretical calculations on SMMs are typically done on isolated molecular species, and to validate this approximation the magnetic anisotropy was further studied through experimental techniques. EPR measurements confirm an axial anisotropy of 1, and magnetic measurements provide experimental Zero-Field Splitting (ZFS) parameters, showing that the values from theoretical calculations are slightly overestimated. The X-ray electron density determined from 20 K single-crystal synchrotron X-ray diffraction data provides estimated d-orbital populations also suggesting axial magnetic anisotropy in both systems, and furthermore suggesting a more pronounced axiality in 1 compared to 2. This is in good agreement with the results obtained from both magnetic measurements and theoretical calculations. The magnetic anisotropy of 1 is quantified experimentally through polarized powder neutron diffraction via the site susceptibility method, confirming an axial magnetic anisotropy of the compound. A slight deviation in the easy axis direction is observed between experimental and theoretical results. This, together with the overestimation of the ZFS parameters from theoretical calculations, shows that experimental investigation of the magnetic anisotropy of SMMs is of high relevance. Magnetic anisotropy of the central metal atom is a crucial property of single molecule magnets (SMMs).

Slavensky, Hannah H. [Aarhus Univ. (Denmark)] (ORC↗
DOE OSTI2025

A provably stable numerical method for the anisotropic diffusion equation in confined magnetic fields

We present a novel numerical method for solving the anisotropic diffusion equation in magnetic fields confined to a periodic box which is accurate and provably stable. We derive energy estimates of the solution of the continuous initial boundary value problem. A discrete formulation is presented using operator splitting in time with the summation by parts finite difference approximation of spatial derivatives for the perpendicular diffusion operator. Weak penalty procedures are derived for implementing both boundary conditions and parallel diffusion operator obtained by field line tracing. We prove that the fully-discrete approximation is unconditionally stable. Discrete energy estimates are shown to match the continuous energy estimate given the correct choice of penalty parameters. A nonlinear penalty parameter is shown to provide an effective method for tuning the parallel diffusion penalty and significantly minimises rounding errors. Several numerical experiments, using manufactured solutions, the “NIMROD benchmark” problem and a single island problem, are presented to verify numerical accuracy, convergence, and asymptotic preserving properties of the method. Finally, we present a magnetic field with chaotic regions and islands and show the contours of the anisotropic diffusion equation reproduce key features in the field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗