Search NASA⌕ Search

SEARCH · Search NASA

Results for “microbial conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A Survey of Environmental Microbial Flora During Closed Chamber Studies

Services, Inc. and NASA Johnson Space Center, Houston, TX As NASA prepares for long-term missions aboard the International Space Station and the eventual exploration of Mars, closed-environment chambers on Earth have become important test beds for systems evaluations. During 2 separate studies of a selfcontained ecosystem containing 4 crewmembers, microbial surveys of samples from 13 surface and 3 air sites were performed. Microbial concentration of samples from surface sites with frequent water contact (e.g., urinal, sink) did not indicate significantly higher levels of contamination than drier areas, though surface cleaning by the crew may have influenced this conclusion. Changes in bacterial diversity on surface sites implied that the number of transient species was high, suggesting movement by crew activities, aerosols, or both. A non-linear relationship between bacterial diversity and enumeration from surface samples indicated that a rapid increase occurred in the number of species as cell concentration increased to 5 CFU/sq cm. Above this concentration, the number of different bacterial species varied between 11 and 16. Airborne bacteria and fungi averaged only 160 and 1 CFU/m3, respectively. Microbial contamination of the potable water system primarily consisted of 3 species of Gram negative bacteria; however, after 60 days during one study, several species of Bacillus became the dominant flora. This study suggests that under these conditions, microbial contamination in the air and water was suppressed by the life-support systems, though contamination was possible. Conversely, the crew and their activities controlled microbial levels on surfaces. Understanding the factors that affect microbial control will improve the design of microbial testing both during space flight and in analogous Earth-based environments.

Ott, C. Mark↗

Investigation of Supercritical Water Phenomena for Space and Extraterrestrial Application

The cost of carrying or resupplying life support resources for long duration manned space exploration missions such as a mission to Mars is prohibitive and requires the development of suitable recycling technologies. Supercritical Water Oxidation (SCWO) has been identified as an attractive candidate for these extended missions because (i) pre-drying of wet waste streams is not required, (ii) product streams are relatively benign, microbially inert, and easily reclaimed, (iii) waste conversion is complete and relatively fast, and (iv) with proper design and operation, reactions can be self-sustaining. Initial work in this area at NASA was carried out at the Ames Research Center in the 1990 s with a focus on understanding the linkages between feed stock preparation (i.e., particle size and distribution) of cellulosic based waste streams and destruction rates under a range of operating temperatures and pressures. More recently, work in SCWO research for space and extra-terrestrial application has been performed at NASA s Glenn Research Center where various investigations, with a particular focus in the gravitational effects on the thermo-physical processes occurring in the bulk medium, have been pursued. In 2010 a collaborative NASA/CNES (the French Space Agency) experiment on the critical transition of pure water was conducted in the long duration microgravity environment on the International Space Station (ISS). A follow-on experiment, to study the precipitation of salt in sub-critical, trans-critical and supercritical water is scheduled to be conducted on the ISS in 2013. This paper provides a brief history of NASA s earlier work in SCWO, discusses the potential for application of SCWO technology in extended space and extraterrestrial missions, describes related research conducted on the ISS, and provides a list of future research activities to advance this technology in both terrestrial and extra-terrestrial applications.

Hicks, Michael C.↗

Methyl halide production associated with kelp

Methyl halides (MeX) are important trace constituents of the atmosphere because they, mostly MeCl, have a major impact on the atmospheric ozone layer. Also, MeCl may account for 5 pct. of the total Cl budget and MeI may have a central role in the biogeochemical cycling of iodine. High MeI concentrations were found in seawater from kelp beds and it has been suggested that MeI is produced by kelps and that MeI and MeBr along with numerous other halocarbons were released by non-kelp marine macroalgae. The objective was to determine if kelps (and other seaweeds) are sources of MeX and to assess their contribution to the estimated global source strength (EGSS) of MeX. Although the production of MeX appears to be associated with kelp, microbes involved with kelp degradation also produce MeX. Microbial MeX production may be of global significance. The microbial MeX production potential, assuming annual kelp production equals kelp degradation and 100 pct. conversion of kelp halides to MeX, is approx. 2 x the EGSS. This is not achieved but indicates that microbial production of MeX may be of global significance.

Dastoor, Minoo N.↗

Harnessing Synthetic Communities and Microbial Recycling of Space Waste Streams for Biomanufacturing Applications

The long-term habitation of extraterrestrial environments such as the Moon or Mars presents significant challenges including supplying materials to sustain life. Off-world recycling of waste materials into biomanufacturer products may ameliorate this. Current literature highlights the need for efficient waste recycling systems to support the bioproduction of essential materials including foods, pharmaceuticals, and biomaterials. The study herein concerns itself with the investigation of three key aspects: 1) formulating an optimal wastewater media on which to grow recombinant microbes for bioproduction in space, 2) examining the potential for constructing stable and metabolically synergistic synthetic microbial communities for largescale and multi-tiered biomanufacturing, and 3) testing the efficacy of one such bioengineered enzyme, cutinase, on the degradation of PET plastics characteristic of those found in ISS waste as a model for recombinant recycling-based biomanufacturing of mission-critical substrates. Formulation of an optimal wastewater media involved growing several microorganisms on mixtures of synthetic planetary wastes representative of those found in space waste systems, combined with simple carbon sources derived from a physio-chemical CO conversion system to determine their growth potential. Potential synthetic microbial communities were conceptually designed, and their stability and metabolic synergism was evaluated within the context of co-cultures. Cutinase activity assays were utilized to determine the efficacy of bioengineered cutinase on PET plastic degradation. Findings will contribute to optimization of wastewater-based media formulations, data on stable synthetic microbial communities for bioproduction, and effective methods for measuring cutinase-based PET plastic degradation. These outcomes support the development of sustainable waste recycling systems for space habitation and aim to fill gaps in the current literature and proposing innovative solutions for waste recycling in space environments. By leveraging synthetic biology this study seeks to enhance the feasibility of long-term extraterrestrial habitation through sustainable resource management.

Bioprocessing↗

Analog Environments for Venus Aerosol Instrument and Mission Concept Testing

The most common hypothesis discussed for life on Venus is a habitat in the dense, persistent clouds, which are primarily sulfuric acid with a secondary water component. Although Earth lacks a complete Venus analog environment, several partial analogs exist which can inform our understanding of the requirements for cloud habitability as well as serving as potential testbeds for future Venus instruments or missions. Earth’s tropospheric clouds have larger particles, more water, and shorter lifetimes than Venus’s; however, they have a partial overlap in pressure and temperature, and are our only example of an airborne habitat.They can inform how particle residence time and microbial generation time constrain habitable atmospheric regions. On the biological side, this includes available nutrients and energy, environmental stressors such as radiation, osmotic potential and acidity, and time spent in protective but inactive forms (endospores, cysts, akinetes); on the physical side, gravity, air density and viscosity, thermal lofting, gravity waves, scavenging due to precipitation, and other airflow dynamics, as well as effective particle radius and electrical charge. They can also enable sampling strategy tests for airborne life detection, ranging from10 2 to10 8 viable cells/mL (10 -3 to 10 -9 cells/particle). Conversely, Earth's stratospheric sulfate layer lacks an active microbial presence, and is at a colder and less dense altitude but has partially analogous values in terms of H2SO4 and water concentration, particle size, and number density. These aerosols are accessible to aircraft and high-altitude balloons. Even more accessible potential analogs include sea spray, which overlaps with the smaller (haze) particle sizes and densities at Venus and contains trace organic constituents; marine fog, which at higher densities can match Venus’s larger (Mode 2) particle properties and contains a range of trace compounds including ammonia, phosphates, sulfates, and nitrates; and spray from acidic hydrothermal systems, which can cover a wide variety of sizes, densities, and chemical compositions. These analogs could improve the development of Venus cloud sampling instruments or sondes, including field tests of material compatibility, particle capture efficiency, and analysis sensitivity.

Analog↗

CO2-Based Manufacturing System for Recombinant Protein Production

Space biomanufacturing is a potential In Situ Resource Utilization (ISRU) strategy to provide critical consumables and products while minimizing the launched mass for long-duration, deep space missions. On Earth, the primary biological conversion of CO 2 to biomass is through photosynthesis, and sugars from photosynthetic organisms are used as feedstocks for microbial biomanufacturing. The efficiency of non-biological reduction of CO 2 to organic molecules, such as acetate or ethanol, has greatly increased in recent years. We are designing a biomanufacturing system to rely on electrochemical CO 2 conversion products for carbon substrates to support microbial growth and production of recombinant proteins. The preliminary design includes a gas-permeable membrane bioreactor with dry salts that are rehydrated and mixed with the carbon source to support growth of bacteria or yeast. The system architecture has a partially automated bioprocessing system to concentrate biomass and purify recombinant protein. This system is designed to operate semi-autonomously with minimal crew intervention. The specific use-case scenario is to produce a thermal stable carbonic anhydrase to increase the efficiency of a proposed liquid amine CO 2 removal subsystem of an environmental control and life-support system (ECLSS) on Mars.

Biomanufacturing↗

Development of a Space Compatible Biomanufacturing System

Space biomanufacturing is a potential In Situ Resource Utilization (ISRU) strategy to provide critical consumables and products while minimizing the launched mass for long-duration, deep space missions. On Earth, the primary biological conversion of CO 2 to biomass is through photosynthesis, and sugars from photosynthetic organisms are used as feedstocks for microbial biomanufacturing. The efficiency of non-biological reduction of CO 2 to organic molecules, such as acetate or ethanol, has greatly increased in recent years. We are designing a biomanufacturing system to rely on electrochemical CO 2 conversion products for carbon substrates to support microbial growth and production of recombinant proteins. The preliminary design includes a gas-permeable membrane bioreactor with dry salts that are rehydrated and mixed with the carbon source to support growth of bacteria or yeast. The system architecture has a partially automated bioprocessing system to concentrate biomass and purify recombinant protein. This system is designed to operate semi-autonomously with minimal crew intervention. The specific use-case scenario is to produce a thermal stable carbonic anhydrase to increase the efficiency of a proposed liquid amine CO 2 removal subsystem of an environmental control and life-support system (ECLSS) on Mars.

Recombinant↗

Biomanufacturing in Space: BioNutrients and CO2-Based Manufacturing

Biomanufacturing can provide on-demand production of mission-critical compounds and materials to support long-duration space exploration while circumventing the challenges of transporting materials from Earth. Synthetic Biology Project is developing two biomanufacturing capabilities: BioNutrients and CO2-Based Manufacturing. BioNutrients is an ongoing mission aboard the International Space Station focused on the production of perishable nutrients in an on demand for direct for consumption. The first flight experiment of this project targeted the production of carotenoids: β-carotene and zeaxanthin, in recombinant yeast strains. Since then, the project has expanded to encompass the production of the fermented consumables like yogurt and kefir for use as a nutrient delivery mechanism. The CO2-Based Manufacturing system aims to use in situ resources to allow for biomanufacturing with minimal re-supply required. The manufacturing platform is combined with an electrochemical CO2 conversion system which can produce simple carbon substrates to support microbial based biomanufacturing. A comprehensive ground-based platform for recombinant protein purification is in development with the goal of producing a thermostable carbonic anhydrase enzyme from E. coli utilizing CO2-derived acetate. Our group hopes to propel advancements in space biomanufacturing for long duration space flight by harnessing the tools of synthetic biology.

Matthew Brian Paddock↗

Harnessing Synthetic Biology for Biomanufacturing in Space: ​from Fermented Foods to Industrial Enzymes

Biomanufacturing can provide on-demand production of mission-critical compounds and materials to support long-duration space exploration while circumventing the challenges of transporting materials from Earth. Synthetic Biology Project is developing two biomanufacturing capabilities: BioNutrients and CO2-Based Manufacturing. BioNutrients is an ongoing mission aboard the International Space Station focused on the production of perishable nutrients in an on demand for direct for consumption. The first flight experiment of this project targeted the production of carotenoids: β-carotene and zeaxanthin, in recombinant yeast strains. Since then, the project has expanded to encompass the production of the fermented consumables like yogurt and kefir for use as a nutrient delivery mechanism. The CO2-Based Manufacturing system aims to use in situ resources to allow for biomanufacturing with minimal re-supply required. The manufacturing platform is combined with an electrochemical CO2 conversion system which can produce simple carbon substrates to support microbial based biomanufacturing. A comprehensive ground-based platform for recombinant protein purification is in development with the goal of producing a thermostable carbonic anhydrase enzyme from E. coli utilizing CO2-derived acetate. Our group hopes to propel advancements in space biomanufacturing for long duration space flight by harnessing the tools of synthetic biology.

synthetic biology↗

Bio-conversion of water hyacinths into methane gas, part 1

Bio-gas and methane production from the microbial anaerobic decomposition of water hyacinths (Eichhornia crassipes) (Mart) Solms was investigated. These experiments demonstrated the ability of water hyacinths to produce an average of 13.9 ml of methane gas per gram of wet plant weight. This study revealed that sample preparation had no significant effect on bio-gas and/or methane production. Pollution of water hyacinths by two toxic heavy materials, nickel and cadmium, increased the rate of methane production from 51.8 ml/day for non-contaminated plants incubated at 36 C to 81.0 ml/day for Ni-Cd contaminated plants incubated at the same temperature. The methane content of bio-gas evolved from the anaerobic decomposition of Ni-Cd contaminated plants was 91.1 percent as compared to 69.2 percent methane content of bio-gas collected from the fermentation of non-contaminated plants.

Wolverton, B. C.↗

A Comprehensive Assessment of Biologicals Contained Within Commercial Airliner Cabin Air

Both culture-based and culture-independent, biomarker-targeted microbial enumeration and identification technologies were employed to estimate total microbial and viral burden and diversity within the cabin air of commercial airliners. Samples from each of twenty flights spanning three commercial carriers were collected via air-impingement. When the total viable microbial population was estimated by assaying relative concentrations of the universal energy carrier ATP, values ranged from below detection limits (BDL) to 4.1 x 106 cells/cubic m of air. The total viable microbial population was extremely low in both of Airline A (approximately 10% samples) and C (approximately 18% samples) compared to the samples collected aboard flights on Airline A and B (approximately 70% samples). When samples were collected as a function of time over the course of flights, a gradual accumulation of microbes was observed from the time of passenger boarding through mid-flight, followed by a sharp decline in microbial abundance and viability from the initiation of descent through landing. It is concluded in this study that only 10% of the viable microbes of the cabin air were cultivable and suggested a need to employ state-of-the art molecular assay that measures both cultivable and viable-but-non-cultivable microbes. Among the cultivable bacteria, colonies of Acinetobacter sp. were by far the most profuse in Phase I, and Gram-positive bacteria of the genera Staphylococcus and Bacillus were the most abundant during Phase II. The isolation of the human pathogens Acinetobacter johnsonii, A. calcoaceticus, Janibacter melonis, Microbacterium trichotecenolyticum, Massilia timonae, Staphylococcus saprophyticus, Corynebacterium lipophiloflavum is concerning, as these bacteria can cause meningitis, septicemia, and a handful of sometimes fatal diseases and infections. Molecular microbial community analyses exhibited presence of the alpha-, beta-, gamma-, and delta- proteobacteria, as well as Gram-positive bacteria, Fusobacteria, Cyanobacteria, Deinococci, Bacterioidetes, Spirochetes, and Planctomyces in varying abundance. Neisseria meningitidis rDNA sequences were retrieved in great abundance from Airline A followed by Streptococcus oralis/mitis sequences. Pseudomonas synxantha sequences dominated Airline B clone libraries, followed by those of N. meningitidis and S. oralis/mitis. In Phase II, Airline C, sequences representative of more than 113 species, enveloping 12 classes of bacteria, were retrieved. Proteobacterial sequences were retrieved in greatest frequency (58% of all clone sequences), followed in short order by those stemming from Gram-positives bacteria (31% of all clone sequences). As for overall phylogenetic breadth, Gram-positive and alpha-proteobacteria seem to have a higher affinity for international flights, whereas beta-and gamma-proteobacteria are far more common about domestic cabin air parcels in Airline C samples. Ultimately, the majority of microbial species circulating throughout the cabin airs of commercial airliners are commensal, infrequently pathogenic normal flora of the human nasopharynx and respiratory system. Many of these microbes likely originate from the oral and nasal cavities, and lungs of passengers and flight crew and are disseminated unknowingly via routine conversation, coughing, sneezing, and stochastic passing of fomites. The data documented in this study will be useful to generate a baseline microbial population database and can be utilized to develop biosensor instrumentation for monitoring microbial quality of cabin or urban air.

microbial diversity↗

Molecular Ecological and Stable Isotopic Studies of Nitrogen Fixation in Modern Microbial Mats

Nitrogen is usually the element limiting biological productivity in the marine environment. Microbial mats, laminated microbial communities analogous to some of the oldest forms of life on Earth, are often the sites of high rates of N fixation (the energetically expensive conversion of atmospheric dinitrogen into a biologically useful form). The N fixing enzyme nitrogenase is generally considered to be of ancient origin, and is widely distributed throughout the Bacterial and Archaeal domains of life, indicating an important role for this process over evolutionary time. The stable isotopic signature of N fixation is purportedly recognizable in organic matter (ancient kerogens as well as present-day microbial mats) as a delta (15)N(sub organic) near zero. We studied two microbial mats exhibiting different rates of N fixation in order to better understand the impact of N fixation on the delta (15)N (sub organic) of the mats, as well as what organisms are important in this process. Mats dominated by the cyanobacterium Microcoleus chthonoplastes grow in permanently submerged hypersaline salterns, and exhibit low rates of N fixation, whereas mats dominated by the cyanobacterium Lyngbya spp grow in an intertidal area, and exhibit rates of N fixation an order of magnitude higher. To examine successional stages in mat growth, both developing and established mats at each location were sampled. PCR and RT-PCR based approaches were used to identify, respectively, the organisms containing nifH (one of the genes that encode nitrogenase) as well as those expressing nifH in these mats. Both mats exhibited a distinct diel cycle of N fixation, with highest rates occurring at night. The delta (15)N(sub organic) of the subtidal Microcoleus mats is near zero whereas the delta (15)N(sub organic) is slightly more positive (+ 2-3%), in the intertidal Lyngbya mats, an interesting difference in view of the fact that overall rates of activity in the intertidal mats are much higher that those in the submerged hypersaline mats. Developing mats in both the subtidal and intertidal locations had delta (15)N(sub organic) values very near those of the established mats. Further work is necessary in order to determine the importance of other transformations of nitrogen on the delta (15)N(sub organic) signature of the mats.

Bebout, B. M.↗

Forward Contamination of Ocean Worlds: A Stakeholder Conversation

A fundamental requirement for space missions designed to touch “potential habitats” is the single number 10−4, the allowable probability of a single Earth organism contaminating the potential habitat. Many aspects of a mission that affect its complexity and cost – hardware design and manufacture, assembly and test, and mission operations – are driven by this value, so it is important, on the threshold of an era of exploring ocean worlds, to have confidence in it. Yet despite its long pedigree and occasional reviews, we find that the current requirement lacks programmatically defensible justification. At issue are three weaknesses: 1) microbial biology, in particular the science of extremophiles, is a rapidly changing field; 2) forward contamination is both a scientific and an ethical issue, yet no ethics-based conversation is apparent within policy-setting circles; 3) because of these two factors, policy-setting cannot be static. We review the history of the requirement; how the evolving understanding of biology could drive it up or down; how the forward-contamination hazard relates to risk-management practice and to the ethics profession; and how a contemporary stakeholder conversation could adapt lessons already learned by other fields.

Waltemathe, Michael↗

Depositional facies and aqueous-solid geochemistry of travertine-depositing hot springs (Angel Terrace, Mammoth Hot Springs, Yellowstone National Park, U.S.A.)

Petrographic and geochemical analyses of travertine-depositing hot springs at Angel Terrace, Mammoth Hot Springs, Yellowstone National Park, have been used to define five depositional facies along the spring drainage system. Spring waters are expelled in the vent facies at 71 to 73 degrees C and precipitate mounded travertine composed of aragonite needle botryoids. The apron and channel facies (43-72 degrees C) is floored by hollow tubes composed of aragonite needle botryoids that encrust sulfide-oxidizing Aquificales bacteria. The travertine of the pond facies (30-62 degrees C) varies in composition from aragonite needle shrubs formed at higher temperatures to ridged networks of calcite and aragonite at lower temperatures. Calcite "ice sheets", calcified bubbles, and aggregates of aragonite needles ("fuzzy dumbbells") precipitate at the air-water interface and settle to pond floors. The proximal-slope facies (28-54 degrees C), which forms the margins of terracette pools, is composed of arcuate aragonite needle shrubs that create small microterracettes on the steep slope face. Finally, the distal-slope facies (28-30 degrees C) is composed of calcite spherules and calcite "feather" crystals. Despite the presence of abundant microbial mat communities and their observed role in providing substrates for mineralization, the compositions of spring-water and travertine predominantly reflect abiotic physical and chemical processes. Vigorous CO2 degassing causes a +2 unit increase in spring water pH, as well as Rayleigh-type covariations between the concentration of dissolved inorganic carbon and corresponding delta 13C. Travertine delta 13C and delta 18O are nearly equivalent to aragonite and calcite equilibrium values calculated from spring water in the higher-temperature (approximately 50-73 degrees C) depositional facies. Conversely, travertine precipitating in the lower-temperature (< approximately 50 degrees C) depositional facies exhibits delta 13C and delta 18O values that are as much as 4% less than predicted equilibrium values. This isotopic shift may record microbial respiration as well as downstream transport of travertine crystals. Despite the production of H2S and the abundance of sulfide oxidizing microbes, preliminary delta 34S data do not uniquely define the microbial metabolic pathways present in the spring system. This suggests that the high extent of CO2 degassing and large open-system solute reservoir in these thermal systems overwhelm biological controls on travertine crystal chemistry.

Non-NASA Center↗

Design and testing of a unique randomized gravity, continuous flow bioreactor

A rotating, null gravity simulator, or Couette bioreactor was successfully used for the culture of mammalian cells in a simulated microgravity environment. Two limited studies using Lipomyces starkeyi and Streptomyces clavuligerus were also conducted under conditions of simulated weightlessness. Although these studies with microorganisms showed promising preliminary results, oxygen limitations presented significant limitations in studying the biochemical and cultural characteristics of these cell types. Microbial cell systems such as bacteria and yeast promise significant potential as investigative models to study the effects of microgravity on membrane transport, as well as substrate induction of inactive enzyme systems. Additionally, the smaller size of the microorganisms should further reduce the gravity induced oscillatory particle motion and thereby improve the microgravity simulation on earth. Focus is on the unique conceptual design, and subsequent development of a rotating bioreactor that is compatible with the culture and investigation of microgravity effects on microbial systems. The new reactor design will allow testing of highly aerobic cell types under simulated microgravity conditions. The described reactor affords a mechanism for investigating the long term effects of reduced gravity on cellular respiration, membrane transfer, ion exchange, and substrate conversions. It offers the capability of dynamically altering nutrients, oxygenation, pH, carbon dioxide, and substrate concentration without disturbing the microgravity simulation, or Couette flow, of the reactor. All progeny of the original cell inoculum may be acclimated to the simulated microgravity in the absence of a substrate or nutrient. The reactor has the promise of allowing scientists to probe the long term effects of weightlessness on cell interactions in plants, bacteria, yeast, and fungi. The reactor is designed to have a flow field growth chamber with uniform shear stress, yet transfer high concentrations of oxygen into the culture medium. The system described allows for continuous, on line sampling for production of product without disturbing fluid and particle dynamics in the reaction chamber. It provides for the introduction of substrate, or control substances after cell adaptation to simulated microgravity has been accomplished. The reactor system provides for the nondisruptive, continuous flow replacement of nutrient and removal of product. On line monitoring and control of growth conditions such as pH and nutrient status are provided. A rotating distribution valve allows cessation of growth chamber rotation, thereby preserving the simulated microgravity conditions over longer periods of time.

Lassiter, Carroll B.↗

Biogeochemical cycling of manganese in Oneida Lake, New York: whole lake studies of manganese

Oneida Lake, New York is a eutrophic freshwater lake known for its abundant manganese nodules and a dynamic manganese cycle. Temporal and spatial distribution of soluble and particulate manganese in the water column of the lake were analyzed over a 3-year period and correlated with other variables such as oxygen, pH, and temperature. Only data from 1988 are shown. Manganese is removed from the water column in the spring via conversion to particulate form and deposited in the bottom sediments. This removal is due to biological factors, as the lake Eh/pH conditions alone can not account for the oxidation of the soluble manganese Mn(II). During the summer months the manganese from microbial reduction moves from the sediments to the water column. In periods of stratification the soluble Mn(II) builds up to concentrations of 20 micromoles or more in the bottom waters. When mixing occurs, the soluble Mn(II) is rapidly removed via oxidation. This cycle occurs more than once during the summer, with each manganese atom probably being used several times for the oxidation of organic carbon. At the end of the fall, whole lake concentrations of manganese stabilize, and remain at about 1 micromole until the following summer, when the cycle begins again. Inputs and outflows from the lake indicate that the active Mn cycle is primarily internal, with a small accumulation each year into ferromanganese nodules located in the oxic zones of the lake.

NASA Discipline Exobiology↗

Analysis of Process Gases and Trace Contaminants in Membrane-Aerated Gaseous Effluent Streams.

In membrane-aerated biofilm reactors (MABRs), hollow fibers are used to supply oxygen to the biofilms and bulk fluid. A pressure and concentration gradient between the inner volume of the fibers and the reactor reservoir drives oxygen mass transport across the fibers toward the bulk solution, providing the fiber-adhered biofilm with oxygen. Conversely, bacterial metabolic gases from the bulk liquid, as well as from the biofilm, move opposite to the flow of oxygen, entering the hollow fiber and out of the reactor. Metabolic gases are excellent indicators of biofilm vitality, and can aid in microbial identification. Certain gases can be indicative of system perturbations and control anomalies, or potentially unwanted biological processes occurring within the reactor. In confined environments, such as those found during spaceflight, it is important to understand what compounds are being stripped from the reactor and potentially released into the crew cabin to determine the appropriateness or the requirement for additional mitigation factors. Reactor effluent gas analysis focused on samples provided from Kennedy Space Center's sub-scale MABRs, as well as Johnson Space Center's full-scale MABRs, using infrared spectroscopy and gas chromatography techniques. Process gases, such as carbon dioxide, oxygen, nitrogen, nitrogen dioxide, and nitrous oxide, were quantified to monitor reactor operations. Solid Phase Microextraction (SPME) GC-MS analysis was used to identify trace volatile compounds. Compounds of interest were subsequently quantified. Reactor supply air was examined to establish target compound baseline concentrations. Concentration levels were compared to average ISS concentration values and/or Spacecraft Maximum Allowable Concentration (SMAC) levels where appropriate. Based on a review of to-date results, current trace contaminant control systems (TCCS) currently on board the ISS should be able to handle the added load from bioreactor systems without the need for secondary mitigation.

Gaseous Effluent Streams↗