Search NASA⌕ Search

SEARCH · Search NASA

Results for “microgravit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Motions in fluids caused by microgravitational acceleration and their modification by relative rotation

The primary reason for conducting many materials science experiments in space is to minimize or eliminate undesirable effects that might result because of convective motions in fluids which are driven by buoyancy effects. Of particular interest are the low-frequency accelerations caused by the earth's gravity gradient field, spacecraft attitude motions, and atmospheric drag, since it is known that these can give rise to sustained fluid motion. In order to gain a limited understanding of the effects of these accelerations their magnitude and orientation have been examined, and the Stokes' motion of a spherical particle in a fluid has been calculated for various types of spacecraft attitude motions. In addition, the effect of slowly rotating the experimental system relative to the spacecraft (in order to increase the residence time of the particle in the neighborhood of its initial position) is assessed.

Alexander, J. Iwan D.↗
NASA NTRS1992

Microgravitational effects on chromosome behavior (7-IML-1)

The effects of the two major space-related conditions, microgravity and radiation, on the maintenance and transmission of genetic information have been partially documented in many organisms. Specifically, microgravity acts at the chromosomal level, primarily on the structure and segregation of chromosomes, in producing major abberations such as deletions, breaks, nondisjunction, and chromosome loss, and to a lesser degree, cosmic radiation appears to affect the genic level, producing point mutations and DNA damage. To distinguish between the effects from microgravity and from radiation, it is necessary to monitor both mitotic and meiotic genetic damage in the same organism. The yeast Saccharomyces cerevisiae is used to monitor at high resolution the frequency of chromosome loss, nondisjunction, intergenic recombination, and gene mutation in mitotic and meiotic cells, to a degree impossible in other organisms. Because the yeast chromosomes are small, sensitive measurements can be made that can be extrapolated to higher organisms and man. The objectives of the research are: (1) to quantitate the effects of microgravity and its synergism with cosmic radiation on chromosomal integrity and transmission during mitosis and meiosis; (2) to discriminate between chromosomal processes sensitive to microgravity and/or radiation during mitosis and meiosis; and (3) to relate these findings to anomalous mitotic mating type switching and ascosporogenesis following meiosis.

Bruschi, Carlo↗
NASA NTRS1998

Cell Kinetic and Histomorphometric Analysis of Microgravitational Osteopenia: PARE.03B

Previous methods of identifying cells undergoing DNA synthesis (S-phase) utilized H-3 thymidine (3HT) autoradiography. 5-Bromo-2'-deoxyuridine (BrdU) immunohistochemistry is a nonradioactive alternative method. This experiment compared the two methods using the nuclear volume model for osteoblast histogenesis in two different embedding media. Twenty Sprague-Dawley rats were used, with half receiving 3HT (1 micro Ci/g) and the other half BrdU (50 microgram/g). Condyies were embedded (one side in paraffin, the other in plastic) and S-phase nuclei were identified using either autoradiography or immunohistochemistry. The fractional distribution of preosteoblast cell types and the percentage of labeled cells (within each cell fraction and label index) were calculated and expressed as mean q standard error. Chi-Square analysis showed only a minor difference in the fractional distribution of cell types. However, there were significant differences (p less than 0.05) by ANOVA, in the nuclear labeling of specific cell types. With the exception of the less-differentiated A+A'cells, more BrdU label was consistently detected in paraffin than in plastic-embedded sections. In general, more nuclei were labeled with 3H-thymidine than with BrdU in both types of embedding media. Labeling index data (labeled cells/total cells sampled x 100) indicated that BrdU in paraffin, but not plastic gave the same results as 3HT in either embedding method. Thus, we conclude that the two labeling methods do not yield the same results for the nuclear volume model and that embedding media is an important factor whenusing BrdU. As a result of this work, 3HT was chosen for used in the PARE.03 flight experiments.

Roberts, W. Eugene↗
NASA NTRS1998

Cell Kinetic and Histomorphometric Analysis of Microgravitational Osteopenia: PARE.03B

Previous methods of identifying cells undergoing DNA synthesis (S-phase) utilized 3H-thymidine (3HT) autoradiography. 5-Bromo-2'-deoxyuridine (BrdU) immunohistochemistry is a nonradioactive alternative method. This experiment compared the two methods using the nuclear volume model for osteoblast histogenesis in two different embedding media. Twenty Sprague-Dawley rats were used, with half receiving 3HT (1 micro-Ci/g) and the other half BrdU (50 micro-g/g). Condyles were embedded (one side in paraffin, the other in plastic) and S-phase nuclei were identified using either autoradiography or immunohistochemistry. The fractional distribution of preosteoblast cell types and the percentage of labeled cells (within each cell fraction and label index) were calculated and expressed as mean +/- standard error. Chi-Square analysis showed only a minor difference in the fractional distribution of cell types. However, there were,significant differences (p less than 0.05) by ANOVA, in the nuclear labeling of specific cell types. With the exception of the less-differentiated A+A' cells, more BrdU label was consistently detected in paraffin than in plastic-embedded sections. In general, more nuclei were labeled with 3H-thymidine than with BrdU in both types of embedding media (Fig 2.). Labeling index data (labeled cells/total cells sampled x 100) indicated that BrdU in paraffin, but not plastic gave the same results as 3HT in either embedding method. Thus, we conclude that the two labeling methods do not yield the same results.

Roberts, W. Eugene↗
NASA NTRS1997

Cell Kinetic and Histomorphometric Analysis of Microgravitational Osteopenia: PARE.03B

The final report includes the hypotheses and specific aims of the project as well as summaries of the experimental findings. Descriptions of several figures that are not included in the report are also presented. A list of publications that resulted from the research is also given. The three experimental summaries are entitled: (1) Pre-flight Experiment to compare 5-Bromo-2'Deoxyuridine (BrdU) Immunohistochemistry and 3H-Thymidine (3HT) Autoradiography; (2) Recovery of Osteoblast Histogenesis in Rat Periodontal Ligament following a 9-day Spaceflight (PARE.03); and (3) Analysis of Mandibular Condyles from PARE.03 Flight Experiment.

Roberts, W. Eugene↗
NASA NTRS1993

Radiation and phase change of lithium fluoride in an annulus

A one-dimensional thermal model is developed to evaluate the effect of radiation on the phase change of lithium-fluoride (LiF) in an annular canister under gravitational and microgravitational conditions. Specified heat flux at the outer wall of the canister models focused solar flux; adiabatic and convective conditions are considered for the inner wall. A two-band radiation model is used for the combined-mode heat transfer within the canister, and LiF optical properties relate metal surface properties in vacuum to those in LiF. For axial gravitational conditions, the liquid LiF remains in contact with the two bounding walls, whereas a void gap is used at the outer wall to model possible microgravitational conditions. For the adiabatic cases, exact integrals are obtained for the time required for complete melting of the LiF. Melting was found to occur primarily from the outer wall in the 1-g model, whereas it occurred primarily from the inner wall in the mu-g model. For the convective cases, partially melted steady-state conditions and fully melted conditions are determined to depend on the source flux level, with radiation extending the melting times.

Lund, Kurt O.↗
NASA NTRS1989

Microgravity science and applications: Apparatus and facilities

NASA support apparatus and facilities for microgravity research are summarized in fact sheets. The facilities are ground-based simulation environments for short-term experiments, and the shuttle orbiter environment for long duration experiments. The 17 items of the microgravitational experimental apparatus are described. Electronic materials, alloys, biotechnology, fluid dynamics and transport phenomena, glasses and ceramics, and combustion science are among the topics covered.

Source record↗
NASA NTRS1991

From biological neural networks to thinking machines: Transitioning biological organizational principles to computer technology

The three-dimensional organization of the vestibular macula is under study by computer assisted reconstruction and simulation methods as a model for more complex neural systems. One goal of this research is to transition knowledge of biological neural network architecture and functioning to computer technology, to contribute to the development of thinking computers. Maculas are organized as weighted neural networks for parallel distributed processing of information. The network is characterized by non-linearity of its terminal/receptive fields. Wiring appears to develop through constrained randomness. A further property is the presence of two main circuits, highly channeled and distributed modifying, that are connected through feedforward-feedback collaterals and biasing subcircuit. Computer simulations demonstrate that differences in geometry of the feedback (afferent) collaterals affects the timing and the magnitude of voltage changes delivered to the spike initiation zone. Feedforward (efferent) collaterals act as voltage followers and likely inhibit neurons of the distributed modifying circuit. These results illustrate the importance of feedforward-feedback loops, of timing, and of inhibition in refining neural network output. They also suggest that it is the distributed modifying network that is most involved in adaptation, memory, and learning. Tests of macular adaptation, through hyper- and microgravitational studies, support this hypothesis since synapses in the distributed modifying circuit, but not the channeled circuit, are altered. Transitioning knowledge of biological systems to computer technology, however, remains problematical.

Ross, Muriel D.↗
NASA NTRS1991

AIAA/IKI Microgravity Science Symposium, 1st, Moscow, USSR, May 13-17, 1991, Proceedings

The state of the art of microgravity science is examined in reviews and reports. Consideration is given to fluid physics; modeling and numerical analysis; crystal growth of electronic materials, proteins, metals, alloys, glasses, and ceramics; biotechnology, combustion science, microgravity hardware, and fundamental phenomena; and education. Particular attention is given to containerless science and technology, a low-gravity two-phase flow with heat transfer, numerical investigation on Benard instability in a finite liquid layer, synthesis and crystallization of refractory compounds from solutions in metallic melts under microgravitation conditions, the long duration protein crystallization experiment aboard the Mir Space Station, directional solidification in immiscible systems, formation of periodic layer structure in oxide melts under different gravity values, opposed flow flame spread in normal, enhanced, and reduced gravity, automatic equipment for semiconductor production in space, and consort and joust sounding rocket missions.

Source record↗
NASA NTRS1991

Homogeneous Premixed and Nonpremixed Flames in Microgravity - A Review

Combustion studies under microgravitational conditions are discussed in which fire-safety issues, near-limit phenomena, and flammability limits are addressed. The studies use ground-based drop towers to produce up to 5 s of about 10 exp -6 g and aircraft facilities to generate up to 20 s of about 10 exp -2 g. The limits of flammability and radiative-heat loss are important research objectives, and experimentally derived values are discussed. Other phenomena are reported including stationary spherical flames and self-extinguishing flames, and the effects of the Taylor instability are documented in the experiments. The flame-surface geometry is examined concurrently by means of numerical simulations, and flame processes are concluded to be unique under microgravity except when the flow velocities are large.

Faeth, G. M.↗
NASA NTRS1991

Some further observations on droplet combustion characteristics - NASA LeRC-Princeton results

Experimental and numerical studies are reviewed which are designed to examine the effects of droplet/gas motion, product-intermediate absorption, extinction, and sooting on droplet combustion. The experimental work at the NASA-Lewis Research Center involves a 2.2-s droptower for investigating microgravitational effects of droplet combustion over a relatively extended range. The droplet-gas velocities are very low because the spherosymmetrical nature of the major combustion processes produces a quiescent environment. The refined experimental results are combined with numerical modeling based on a technique that is fully transient, comprehensive, and has few empirical simplifications. The combination of techniques improves the present understanding of convection-induced effects, reducing soot formation, and promoting quiescent droplet combustion.

Choi, Mun Y.↗
NASA NTRS1991

Thermal calibration and analysis of a Bridgman flight furnace

A combination of computer modeling and experimental measurements is proposed which permits the calibration of the temperature profile for a spacecraft flight furnace. The Fluent code based on the finite difference method uses the furnace set-point temperatures as boundary conditions to model a Bridgman directional solidification furnace. Experimental measurements are employed as a comparison for the numerical analysis, and the radial gradients and wall temperatures are selected when the calculated values are sufficiently close to those from measurements. The calculations are found to agree with experimental data, and some results of the modeling are given which relate to specific furnace parameters. The CFD approach facilitates the transposition of furnace calibration to microgravitational operation in addition to providing precise initial radial temperature gradients and furnace-wall temperatures.

Knuteson, D. J.↗
NASA NTRS1991

Consort and Joust sounding rocket missions

The two suborbital rocket programs are described in terms of their common objective of examining commercial applications of materials processing under microgravitational conditions. The sounding rocket programs have unique launch-service capabilities but provide essentially interchangeable payload accommodations. Major differences include longer low gravity times and larger payload volume for the Joust rocket, spin stabilization and land recovery for the Consort rocket, and faster ascent and reentry accelerations for the Joust rocket. A summary of previous and planned experiments for the rocket programs is given which includes studies of the morphology and strength of elastomer-modified epoxy resins, electrodeposition studies, the demixing of immiscible polymers, foam formation, and polymer experiments. These and other experiments can be facilitated by the microgravity time available on flights of the two sounding rockets.

Wessling, Francis C.↗
NASA NTRS1989

On performing exobiology experiments on an earth-orbital platform with the Gas-Grain Simulation Facility

Laboratory simulations of gas-dust interactions performed on Space Station Freedom in the Gas-Grain Simulation Facility (GGSF) are considered for studying the nature of bodies in the solar system. The GGSF includes a 4-10 liter chamber for experiments with the capability for environmental control, measurement, levitation, and energy. The simulations can provide low gas pressure and dust density in a microgravitational environment.

Huntington, Judith L.↗
NASA NTRS1992

Jet mixing in low gravity - Results of the Tank Pressure Control Experiment

The Tank Pressure Control Experiment (TPCE) is discussed with attention given to the results for controlling storage-tank pressures by forced-convective mixing in microgravitational environments. The fluid dynamics of cryogenic fluids in space is simulated with freon-113 during axial-jet-induced mixing. The experimental flow-pattern data are found to confirm previous data as well as existing mixing correlations. Thermal nonuniformities and tank pressure can be reduced by employing low-energy mixing jets which are useful for enhancing heat/mass transfer between phases. It is found that space cryogenic systems based on the principle of active mixing can be more reliable and predictable than other methods, and continuous or periodic mixing can be accomplished with only minor energy addition to the fluid.

Bentz, M. D.↗
NASA NTRS1991

Definition of two-phase flow behaviors for spacecraft design

Data for complete models of two-phase flow in microgravity are taken from in-flight experiments and applied to an adiabatic flow-regime analysis to study the feasibility of two-phase systems for spacecraft. The data are taken from five in-flight experiments by Hill et al. (1990) in which a two-phase pump circulates a freon mixture and vapor and liquid flow streams are measured. Adiabatic flow regimes are analyzed based on the experimental superficial velocities of liquid and vapor, and comparisons are made with the results of two-phase flow regimes at 1 g. A motion analyzer records the flow characteristics at a rate of 1000 frames/sec, and stratified flow regimes are reported at 1 g. The flow regimes observed under microgravitational conditions are primarily annular and include slug and bubbly-slug regimes. The present data are of interest to the design and analysis of two-phase thermal-management systems for use in space missions.

Reinarts, Thomas R.↗
NASA NTRS1992

Space Station Freedom - Initial plans for U.S. utilization

NASA's utilization plans for the Space Station Freedom (SSF) are outlined with references to the Consolidated Operations and Utilization Plan (COUP) being developed to cover the first five years of the program. The SSF is described with particular attention given to the spacecraft capabilities, and initial long-term U.S. objectives are set forth with more immediate corresponding research areas. U.S. plans include research in microgravity, life sciences, and technology, and payload concepts are shown to be in development for each area. The SSF is expected to be a useful resource for: (1) commercial research on crystal growth; (2) investigations into physical and chemical processes in the microgravitational environment; and (3) technology studies relevant to the efficient exploitation of space. The NASA Partner Utilization Plan on which these observations are based is being prepared for incorporation into the SSF COUP.

Epstein, Barry↗