Disentangling superconductor and dielectric microwave losses in submicrometer Nb / Si O 2 interconnects using a multimode microstrip resonator
Not Available
Garcia, Cougar A. T. (ORCID:0000000170114044)↗
SEARCH · Search NASA
Results for “microstrip resonators”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Simulation and Design of an On-Chip Superconducting Millimetre Filter-Bank Spectrometer
Abstract Superconducting on-chip filter banks provide a scalable, space saving solution to create imaging spectrometers at millimetre and submillimetre wavelengths. We present an easy to realise, lithographed superconducting filter design with a high tolerance to fabrication error. Using a capacitively coupled $$\lambda /2$$ λ / 2 microstrip resonator to define a narrow ( $$\lambda /\Delta \lambda = 300$$ λ / Δ λ = 300 ) spectral pass band, the filtered output of a given spectrometer channel directly connects to a lumped-element kinetic inductance detector. We show the tolerance analysis of our design, demonstrating $$<11\%$$ < 11 % change in filter quality factor to any one realistic fabrication error and a full filter-bank efficiency forecast to be 50% after accounting for fabrication errors and dielectric loss tangent.
Robson, G. (ORCID:0000000315279326)↗
Reducing the Susceptibility of Lumped-Element KIDs to Two-Level System Effects
Arrays of lumped-element kinetic inductance detectors (LEKIDs) optically coupled through an antenna-coupled transmission line are a promising candidate for future cosmic microwave background experiments. However, the dielectric materials used for the microstrip architecture are known to degrade the performance of superconducting resonators. In this paper, we investigate the feasibility of microstrip coupling to a LEKID, focusing on a systematic study of the effect of depositing amorphous silicon nitride on a LEKID. The discrete and spatially separated inductive and capacitive regions of the LEKID allow us to vary the degree of dielectric coverage and determine the limitations of the microstrip coupling architecture. We show that by careful removal of dielectric from regions of high electric field in the capacitor, there is minimal degradation in dielectric loss tangent of a partially covered lumped-element resonator. We present the effects on the resonant frequency and noise power spectral density and, using the dark responsivity, provide an estimate for the resulting detector sensitivity.
47 OTHER INSTRUMENTATION↗
Fabrication Development for SPT-SLIM, a Superconducting Spectrometer for Line Intensity Mapping
Line Intensity Mapping (LIM) is a new observational technique that uses low-resolution observations of line emission to efficiently trace the large-scale structure of the Universe out to high redshift. Common mm/sub-mm emission lines are accessible from ground-based observatories, and the requirements on the detectors for LIM at mm-wavelengths are well matched to the capabilities of large-format arrays of superconducting sensors. We describe the development of an R = lambda/Delta lambda = 300 on-chip superconducting filter-bank spectrometer covering the 120-180 GHz band for future mm-LIM experiments, focusing on SPT-SLIM, a pathfinder LIM instrument for the South Pole Telescope. Radiation is coupled from the telescope optical system to the spectrometer chip via an array of feedhorn-coupled orthomode transducers. Superconducting microstrip transmission lines then carry the signal to an array of channelizing half-wavelength resonators, and the output of each spectral channel is sensed by a lumped element kinetic inductance detector (leKID). Key areas of development include incorporating new low-loss dielectrics to improve both the achievable spectral resolution and optical efficiency and development of a robust fabrication process to create a galvanic connection between ultra-pure superconducting thin-films to realize multi-material (hybrid) leKIDs. We provide an overview of the spectrometer design, fabrication process, and prototype devices.
microstrip resonators↗
Characterization of MKIDs for CMB Observation at 220 GHz With the South Pole Telescope
We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_{i} = 4.8 \times 10^{5}$, aluminum inductor transition temperature $T_{c} = 1.19$K, and kinetic inductance fraction $\alpha _{k} = 0.32$. We optically characterize both the microstrip-coupled and CPW-coupled resonators, and find both have a spectral response close to prediction with an optical efficiency of $\eta \sim 70\%$. However, we find slightly lower optical response on the lower edge of the band than predicted, with neighboring dark detectors showing more response in this region, though at level consistent with less than 5% frequency shift relative to the optical detectors. The detectors show polarized response consistent with expectations, with a cross-polar response of $\sim 10\%$for both detector orientations.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Magnetometry in a diamond anvil cell using nitrogen vacancy centers in a nanodiamond ensemble
The emerging field of optical magnetometry utilizing negative-charged nitrogen vacancy (NV – ) centers provides a highly sensitive lab bench technique for spatially resolved physical property measurements. Their implementation in high pressure diamond anvil cell (DAC) environments will become common as other techniques are often limited due to the spatial constraints of the sample chamber. Apparatus and techniques are described here permitting for more general use of magnetic field measurements inside a DAC using continuous wave optical detected magnetic resonance in NV – centers in a layer of nanodiamonds. A microstrip antenna delivers a uniform microwave field to the DAC and is compatible with simple metal gaskets, and the sensor layer of deposited nanodiamonds allows for simple determination of the magnetic field magnitude for B in the 1–100 G range. The ferromagnetic transition in iron at 18 GPa is measured with the apparatus, along with its hysteretic response.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Multimaterial Aerosol Jet Printed Magnetic Nanocomposites for Microwave Circuits
Here this article demonstrates the process and characterization of additively manufactured polymer-matrix magnetic nanocomposites. These nanocomposites are composed of nickel-zinc ferrite (Ni 0.5 Zn 0.5 Fe 2 O 4 ) nanoparticles in a polyimide matrix. These materials are printed using multimaterial aerosol jet printing where aerosols of nickel-zinc ferrite and polyimide inks are mixed in place to fabricate structures with nonunity relative permeability. To characterize these materials, we use energy-dispersive X-ray spectroscopy to estimate the content of ferrite in the composite, fitted simulation models, and ring resonator measurements to estimate the permeability. In fully aerosol jet printed 1-mm 2 inductors, we demonstrate an increase in inductance density of 40% in a 4.5-turn microstrip spiral inductor using this printed composite. These fully printed inductors demonstrate an inductance density of 4.2-nH/mm 2 . EDS analysis shows films with 18 wt.% Ni 0.5 Zn 0.5 Fe 2 O 4 . Finally, we show microstrip transmission lines on printed composite compared to the same on polyimide subjected to a dc magnetic bias, displaying a magnetic resonance behavior.
42 ENGINEERING↗
Measurement of Dielectric Loss in Silicon Nitride at Centimeter and Millimeter Wavelengths
This work presents a suite of measurement techniques for characterizing the dielectric loss tangent across a wide frequency range from similar to 1 GHz to 150 GHz using the same test chip. In the first method, we fit data from a microwave resonator at different temperatures to a model that captures the two-level system (TLS) response to extract and characterize both the real and imaginary components of the dielectric loss. The inverse of the internal quality factor is a second measure of the overall loss of the resonator, where TLS loss through the dielectric material is typically the dominant source. The third technique is a differential optical measurement at 150 GHz. The same antenna feeds two microstrip lines with different lengths that terminate in two microwave kinetic inductance detectors (MKIDs). The difference in the detector response is used to estimate the loss per unit length of the microstrip line. Our results suggest a larger loss for SiNx at 150 GHz of tan delta similar to 4 x 10(-3) compared to 2.0 x 10(-3) and greater than or similar to 1 x 10(-3) measured at similar to 1 GHz using the other two methods. These measurement techniques can be applied to other dielectrics by adjusting the microstrip lengths to provide enough optical efficiency contrast and other mm/sub-mm frequency ranges by tuning the antenna and feedhorn accordingly.
Dielectrics loss↗
Aerosol-Jet Printed Transferable Millimeter-Wave Circuits
Printed millimeter wave (mmW) electronics have been of high interest in the field of communications for some time now due to the potential ability to fabricate mmW systems that utilize 3-Dimension Heterogeneous Integration (3DHI) to improve performance beyond traditional systems. Here, in this paper, a method for fabricating transferable mmW structures via aerosol-jet printing (AJP) is presented. A PDMS stamp assisted liftoff procedure is developed to separate the printed part from a rigid printing support surface and apply it to an adhesive target surface. Several microstrip (MS) line structures are demonstrated to characterize the effect of stamp transfer on the RF performance of the printed circuits. The effects of printed vias on RF probe pads and shifts in the resonant frequencies of a Beatty standard line after transfer are considered and characterized using S-parameter measurements.
42 ENGINEERING↗
Compensation of Anisotropy in Spin Hall Devices for Neuromorphic Applications
Spintronic nano-oscillators and diodes with reduced nonlinearity benefit from low phase noise and improved device properties. Moreover, they could offer key advantages for realizing neuromorphic applications, such as spike-based neurons and frequency multiplexing in neural networks. Here, in this work, we experimentally demonstrate the reduction in nonlinearity of a spin Hall nano-oscillator (SHNO) by compensation of its effective magnetic anisotropy. The study involves optimization of Co/Ni multilayer growth to achieve the compensation, followed by spin-diode measurements on patterned microstrips to quantify their anisotropy. The relationship between the second- (H k 2 = 0.47 mT) and first-order ($H^{eff}_{k_1}$ = -0.8 mT) anisotropy fields reveals the existence of an easy cone, thereby validating the presence of compensation. Furthermore, we demonstrate a compensated spin diode that has a fixed frequency when the input power is varied. We then study the current-induced auto-oscillation properties of SHNOs on compensated films by patterning nanoconstrictions of 200 and 100 nm wide. The invariance of the resonance frequency and linewidth of the compensated SHNO with applied dc current indicates the absence of nonlinearity. This independence is maintained irrespective of the applied external fields and their orientations. The compensated SHNO obtained has a linewidth of 1.1 MHz and a peak output power of up to 1 pW/MHz.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗