SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A unique IF measurement procedure for evaluating mixer performance and identifying optimum circuit boundary conditions is presented. The technique is applied to a scalable mm-wave single-sideband (image-sum enhanced) mixer design which provides 3.5 to 5 dB typical conversion loss from conventional, packaged devices.
Stratospheric perhydroxyl (HO2) was measured by using a sensitive mm-wave receiver to obtain spectroscopic line profiles of three rotational emission lines in the vicinity of 265.8 GHz. The observations were carried out over four days in September-October 1982 at Mauna Kea, Hawaii and yield good agreement with the column density and vertical distribution predicted above 35 km by three representative two-dimensional photochemical models employing JPL 82-57 reaction rates and chemistry. Contrasts between current theoretical predictions and previous observations by Anderson et al. (1981) are pointed out for HO2 in the 28 to 37-km range, along with the difficulty of joining the latter with the present measurements through a monotonically varying vertical profile for HO2. A possible explanation involving strong temporal and spatial variation in stratospheric water vapor content is suggested.
Although no detection was obtained in the present search for the N = 2-1, J = 5/2-3/2, and J = 3/2-1/2 mm-wave transitions of CO(+) in Comet P/Halley, a 2-sigma upper limit of 8 x 10 to the 11th/sq cm was determined for the beam-averaged column density of this specie. Upon comparison of this upper limit estimate with model predictions involving the variation of such parameters as the chemical composition and ionization mechanisms, it appears that H2O may be the main nucleus constituent of the comet. If, in addition, photodissociation ionization is active in the coma, then the origin of the CO(+) is more likely to be in CO2 than in CO.
Images of an airborne, scanning, radiometer operating at a frequency of 98 GHz, have been analyzed. The mm-wave images were obtained in 1985/1986 using the JPL mm-wave imaging sensor. The goal of this study was to enhance the information content of these images and make their interpretation easier for human analysis. In this paper, a visual interpretative approach was used for information extraction from the images. This included application of nonlinear transform techniques for noise reduction and for color, contrast and edge enhancement. Results of the techniques on selected mm-wave images are presented.
Communications Research Laboratory (CRL) studied an advanced mobile satellite communications system using Ka and millimeter-wave bands in the R&D Satellite project. The project started in 1990 and the satellite will be launched in 1997. On-board multi-beam interconnecting is one of basic functions to realize one-hop connection among Very Small Aperture Terminals (VSATs), mobile, and hand-held terminals in future mobile satellite communications system. An Intermediate Frequency (IF) filter bank and regenerative transponder are suitable for this function. The transponder configuration of an advanced mobile communications mission of the R&D Satellite for experiment is shown. High power transmitters of Ka and millimeter-wave bands, a 3x3 IF filter band and Single Channel Per Carrier/Time Division Multiplexing (SCPC/TDM) regenerative MODEMS, which will be boarded on the R&D Satellite, are being developed for the purpose of studying the feasibility of advanced mobile communications system.
Communications Research Laboratory (CRL) has investigated an advanced millimeter (mm)-wave satellite communications system for personal use. Experiments in mm-wave personal satellite communication are to be conducted for 3 years using Japan's Engineering Test Satellite VI (ETS-VI). This paper describes an experimental mm-wave (43/38 GHz) personal satellite communication system, including an onboard transponder and an earth terminal. The on-board transponder is almost completed, and the ground experiment system is still in the design stage. The transponder employs advanced mm-wave solid state technology. It uses 38 GHz high power solid state amplifiers to accelerate the development of mm-wave solid state devices which are indispensable to personal earth terminals. The transponder consists of a 43 GHz receiver with a built-in low noise amplifier, an IF filter section with very narrow bandwidth to improve the carrier-to-noise power ratio of the weak personal communication signal, and two high power amplifiers using newly developed high power Gallium Arsenide (GaAs) metal-semiconductor field effect transistors (MESFETs).
Full-wave analysis is employed to determine the far-field pattern and input impedance of a dipole-fed horn antenna in a ground plane, and the theoretical results are compared with mm-wave and microwave data. The theoretical work exploits the Green's function corresponding to the horn structure and the method of moments. It is determined that the horn should have 70 sections/wavelength and 50 secondary modes for optimized accuracy, and certain dipole positions can reduce the resonance to zero. The experimentally derived impedance and radiation patterns agree with the constraints developed theoretically. The 70-degree flare-angle horn with selected dipole positions and horn apertures yields good radiation patterns, cross-polarization levels, and resonant dipole impedances. The conclusions are of interest to the development of the horn antennas etched in Si/GaAs for applications to zero-visibility tracking, radio astronomy, plasma diagnostics, and remote sensing.
Laboratory measurements have been conducted of the opacity of gaseous SO2 in a CO2 atmosphere at 12.3 cm, 1.32 cm, and 0.32 cm, with a view to the effects of this gas on the mm-wave emission of the Venus atmosphere. Close agreement is noted between the results obtained and the absorptivity predicted from a Van Vleck-Weisskopf formalism at the two shortest wavelengths, but not at the longest. These results have been incorporated into a radiative transfer model in order to infer an abundance profile for gaseous SO2 in Venus' middle atmosphere, and are also used to ascertain the effects of a SO2/CO2 gaseous mixture on the mm-wavelength spectrum of Venus.
We report broadband monolithic transmitters and receivers IC's for mm-wave electromagnetic measurements. The IC's use nonlinear transmission lines (NLTL) and sampling circuits as picosecond pulse generators and detectors. The pulses are radiated and received by planar monolithic bow-tie antennas, collimated with silicon substrate lenses and off-axis parabolic reflectors. Through Fourier transformation of the received pulse, 30-250 GHz free space gain-frequency measurements are demonstrated with an accuracy approximately = 0.17 dB, RMS.
The formal retrieval error analysis of Rodgers (1990) allows the quantitative determination of such retrieval properties as measurement error sensitivity, resolution, and inversion bias. This technique was applied to five numerical inversion techniques and two nonlinear iterative techniques used for the retrieval of middle atmospheric constituent concentrations from limb-scanning millimeter-wave spectroscopic measurements. It is found that the iterative methods have better vertical resolution, but are slightly more sensitive to measurement error than constrained matrix methods. The iterative methods converge to the exact solution, whereas two of the matrix methods under consideration have an explicit constraint, the sensitivity of the solution to the a priori profile. Tradeoffs of these retrieval characteristics are presented.
Historically, cloud structures, dynamics, and precipitation processes have been observed and measured with sensors from two different spatial resolutions. Laser-based sensors have volume resolutions on the order of 10(exp -4) to 10(exp -2) cubic meters for a 1-s sample. Radar systems operating at wavelengths between 1 and 10 cm have resolutions on the order of 10(exp 4) to 10(exp 7) cubic meters. The resolutions of micro-wave systems depend primarily on the system RF bandwidth and antenna bandwidth. Both resolution regimes were useful in the study of cloud structures and processes - the former for determining resolution on the individual cloud particle scale and the latter for studying the coarse characteristics of cloud dynamics and structure. There are, however, cloud processes and structures that occur on scales that lie between these two regimes: the process of entrainment, where outside air is brought within the cloud boundaries; the mixing of in-cloud particles with different histories; cloud particle coalescence; and ice formation. The use of mm-wave (30- to 300-GHz) radars offers an opportunity to observe cloud processes at these scales and determine their influence on precipitation development, cloud albedos, cloud lifetimes, chemical cycling of tract substances, aircraft icing, and other meteorological phenomena. To determine the usefulness of a 35-GHz radar for observing these precipitation and cloud processes, a research program was initiated. The objectives of this program are to develop a 35-GHz radar, to measure scattering from precipitation and clouds, and to develop a model to compute scattering from clouds using the finite-difference time-domain (FDTD) technique.
The Lidar In-Space Technology Experiment, (LITE), has been developed, designed, and built by NASA Langley Research Center, to be flown on the space shuttle 'Discovery' on September 9, 1994. Lidar, which stands for light detecting and ranging, is a radar system that uses short pulses of laser light instead of radio waves in the case of the common radar. This space-based lidar offers atmospheric measurements of stratospheric and tropospheric aerosols, the planetary boundary layer, cloud top heights, and atmospheric temperature and density in the 10-40 km altitude range. A study is being done on the use, advantages, and limitations of a millimeterwave radar to be utilized in synergy with the Lidar system, for the LITE-2 experiment to be flown on a future space shuttle mission. The lower atmospheric attenuation, compared to infrared and optical frequencies, permits the millimeter-wave signals to penetrate through the clouds and measure multi-layered clouds, cloud thickness, and cloud-base height. These measurements would provide a useful input to radiation computations used in the operational numerical weather prediction models, and for forecasting. High power levels, optimum modulation, data processing, and high antenna gain are used to increase the operating range, while space environment, radar tradeoffs, and power availability are considered. Preliminary, numerical calculations are made, using the specifications of an experimental system constructed at Georgia Tech. The noncoherent 94 GHz millimeter-wave radar system has a pulsed output with peak value of 1 kW. The backscatter cross section of the particles to be measured, that are present in the volume covered by the beam footprint, is also studied.
Measurements of chlorine monoxide in the stratosphere over Thule, Greenland (73.6 N, 68.4 W) were made quasi-continuously during the period February 8 to March 24, 1992, using a high-sensitivity ground based mm-wave spectrometer. These observations give diurnal, short term, and long term changes in the mixing ratio and vertical distribution of ClO. At an equivalent time after the Antarctic winter solstice, very large concentrations (up to approximately 1.5 ppbv) occur in lower stratospheric ClO, resulting in massive ozone destruction. We saw no evidence for large (approximately 1 top 1.5 ppbv) amounts of ClO in the 16-25 km range over Thule in February or March, in agreement with UARS (satellite) observations by the MLS mm-wave spectrometer for this period, and in marked contrast to UARS/MLS and ER-2 aircraft measurements over northern Europe and eastern Canada, respectively, during January, 1992. We have evidence for smaller enhancements (approximately 0.2 to 0.5 ppbv) in the 18-30 km range during late February-early March, which could result from transport of residual low NO2 air following earlier polar stratospheric cloud (PSC) processing (the last of which occurred at least one month earlier, however) or the result of chemical processing by Pinatubo aerosols. Direct influence of Pinatubo aerosols on Arctic ozone during the spring of 1992 has been difficult to assess, and this enhancement of low-altitude ClO might be a significant indicator of aerosol effects.
Future generation satellite communication systems in near-Earth orbit will operate at frequencies in the higher mm-wave frequency bands. These satellite systems require low-profile, high gain, light weight and low cost antennas for communications to and from Earth as well as for inter-satellite links (ISL). At higher mm-wave frequencies, the conductor loss of conventional microstrip line is high and consequently the feed network loss of patch antenna arrays is also high. The high loss lowers the array efficiency, and in addition lowers the G/T ratio in a receiving array. Recently a radial line slot antenna array has been demonstrated to have high gain and efficiency at 60 GHz. In this paper, the design, fabrication and characterization of a V-Band (50-75 GHz), cavity backed, circular aperture antenna with suspended substrate stripline (SSS) feed is presented.
An experiment was conducted during March, 1999 to study ways in which to improve techniques for measuring low amounts of total-column precipitable water vapor (PWV). The experiment was conducted at the DOE's ARM program's North Slope of Alaska/Adjacent Arctic Ocean Cloud and Radiation Testbed site (DoE ARM NSA/AAO CaRT) located just outside Barrow, Alaska. NASA and NOAA deployed a suite of radiometers covering 25 channels in the frequency range of 20 GHz up to 340 GHz including 8 channels around the 183 GHz water vapor absorption line. In addition to the usual CaRT site instrumentation the NOAA Depolarization and Backscatter Unattended Lidar (DABUL), the SUNY Rotating Shadowband Spectroradiometer (RSS) and other surface based meteorological instrumentation were deployed during the intensive observation period. Vaisala RS80 radiosondes were launched daily as well as nearby National Weather Service VIZ sondes. Atmospheric conditions ranged from clear calm skies to blowing snow and heavy multi-layer cloud coverage. Measurements made by the radiosondes indicate the PWV varied from approx. 1 to approx. 5 mm during the experiment. The near-surface temperature varied between about -40 C to - 15 C. In this presentation, an overview of the experiment with examples of data collected will be presented. Application of the data for assessing the potential and limitations of millimeter-wave radiometry for retrieving very low amounts of PWV will be discussed.
Future generation satellite communication systems in near-Earth orbit will operate at frequencies in the higher mm-wave frequency hands. These satellite systems require low-profile, high gain, light weight and low cost antennas for communications to and from Earth as well as for inter-satellite links (ISL). At higher mm-wave frequencies, the conductor loss of conventional microstrip line is high and consequently the feed network loss of patch antenna arrays is also high. The high loss lowers the array efficiency and in addition lowers the G/T ratio in a receiving array. Recently a radial line slot antenna array has been demonstrated to have high gain and efficiency at 60 GHz. In this paper, the design, fabrication and characterization of a V-Band (50-75 GHz) 4 x 4 planar array of cavity backed circular aperture antennas with suspended substrate stripline (SSS) corporate feed is presented.
Over the past few years, there has become an increasing interest in the use of millimeter-wave (mm-wave) and sub-millimeter-wave (submm-wave) radiometer observations to investigate the properties of ice particles in clouds. Passive radiometric channels respond to both the integrated particle mass throughout the volume and field of view, and to the amount, location, and size distribution of the frozen (and liquid) particles with the sensitivity varying for different frequencies and hydrometeor types. One methodology used since the 1960's to discern the relationship between the physical state observed and the brightness temperature (TB) is through the temperature weighting function profile. In this research, the temperature weighting function concept is exploited to analyze the sensitivity of various characteristics of the cloud profile, such as relative humidity, ice water path, liquid water path, and surface emissivity. In our numerical analysis, we compute the contribution (in Kelvin) from each of these cloud and surface characteristics, so that the sum of these various parts equals the computed TB. Furthermore, the percentage contribution from each of these characteristics is assessed. There is some intermingling/contamination of the contributions from various components due to the integrated nature of passive observations and the absorption and scattering between the vertical layers, but all in all the knowledge gained is useful. This investigation probes the sensitivity over several cloud classifications, such as cirrus, blizzards, light snow, anvil clouds, and heavy rain. The focus is on mm-wave and submm-wave frequencies, however discussions of the effects of cloud variations to frequencies as low as 10 GHz and up to 874 GHz will also be presented. The results show that nearly 60% of the TB value at 89 GHz comes from the earth's surface for even the heaviest blizzard snow rates. On the other hand, a significant percentage of the TB value comes from the snow in the cloud for 166, and 183 plus or minus 7 GHz for the heavy and medium snow rates. For submm-wave channels, there is no contribution from the surface because these channels cannot probe through clouds, nor normal water vapor amounts in clear air regions. This work is extremely valuable in physically-based retrieval algorithm development research.
We report on the status and development of polarization-sensitive detectors for millimeter-wave applications. The detectors are fabricated on single-crystal silicon, which functions as a low-loss dielectric substrate for the microwave circuitry as well as the supporting membrane for the Transition-Edge Sensor (TES) bolometers. The orthomode transducer (OMT) is realized as a symmetric structure and on-chip filters are employed to define the detection bandwidth. A hybridized integrated enclosure reduces the high-frequency THz mode set that can couple to the TES bolometers. An implementation of the detector architecture at Q-band achieves 90% efficiency in each polarization. The design is scalable in both frequency coverage, 30-300 GHz, and in number of detectors with uniform characteristics. Hence, the detectors are desirable for ground-based or space-borne instruments that require large arrays of efficient background-limited cryogenic detectors.