Search NASA⌕ Search

SEARCH · Search NASA

Results for “mmap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Results of preliminary Microwave Multi-Applications Payload (MMAP) study

A preliminary feasibility study of the microwave multi-applications payload (MMAP) system for the Spacelab has been carried out. The initial objectives of this study have been to determine the minimum equipment requirements of the MMAP and the feasibility of placing the numerous large aperture antennas in the Spacelab. The study was begun by reviewing the experimental objectives and techniques and determining areas of commonality. Emphasis was given to the determination of common RF equipment requirements. These requirementers were considered after agreement among the experiments had been reached on limiting the number of frequencies to be used in the system. This was done so that the number of antennas, transmitters, and receivers could be minimized. The electronics system block diagram and the antenna configurations were considered in some details. It was concluded that the MMAP is feasible and can be an economical method of achieving a large number of experimental goals.

Source record↗

Feasibility and systems definition study for microwave multi-application payload (MMAP)

There were three Shuttle/Spacelab experiments: adaptive multibeam phased array antenna (AMPA) experiment, electromagnetic environment experiment (EEE), and millimeter wave communications experiment (MWCE). Work on the AMPA experiment was completed. Results included are definition of operating modes, sequence of operation, radii of operation about several ground stations, signal format, foot prints of typical orbits and preliminary definition of ground and user terminals. Definition of the MOD I EEE included conceptual hardware designs, spacelab interfaces, preliminary data handling methods, experiment tests and verification, and EMC studies. The MWCE was defined conceptually for a steerable high gain antenna.

Horton, J. B.↗

Feasibility and systems definition study for Microwave Multi-Application Payload (MMAP)

Work completed on three Shuttle/Spacelab experiments is examined: the Adaptive Multibeam Phased Array Antenna (AMPA) Experiment, Electromagnetic Environment Experiment (EEE) and Millimeter Wave Communications Experiment (MWCE). Results included the definition of operating modes, sequence of operation, radii of operation about several ground stations, signal format, foot prints of typical orbits and preliminary definition of ground and user terminals. Conceptual hardware designs, Spacelab interfaces, data handling methods, experiment testing and verification studies were included. The MWCE-MOD I was defined conceptually for a steerable high gain antenna.

Horton, J. B.↗

Microgravity Environment Characterization Program

The Microgravity Science and Applications Division (MSAD), a division within NASA's Office of Life and Microgravity Science and Applications, sponsors a broad range of space-based research in biotechnology, combustion science, fluid physics, fundamental physics, and materials science. To better understand and exploit the orbital environment, MSAD has developed methods and hardware to characterize accelerations on microgravity experiment carriers. MSAD supports research to verify analytically derived acceleration requirements for experiments and provides vibration isolation for sensitive experiments. The Microgravity Measurement and Analysis Project (MMAP), supported by MSAD, incorporates four projects: the Space Acceleration Measurement System (SAMS), the Orbital Acceleration Research Experiment (OARE), the SAMS for International Space Station (SAMS-II), and the Principal Investigator Microgravity Services (PIMS). SAMS was developed to record microgravity accelerations and the OARE was developed to record very low-frequency microgravity accelerations on-board the NASA Orbiters. The SAMS is also used for cooperative investigations on the Russian Mir space station. The SAMS-II is being developed for the same function on-board the International Space Station (ISS). PIMS utilizes microgravity acceleration data to develop a description of each microgravity mission's acceleration environment and to support microgravity investigators in interpreting possible effects of the acceleration environment on their experiments. These elements of the MSAD program will be used to define acceleration requirements for future Orbiter and ISS payloads. This paper describes the MMAP and summarizes the products and services available to principal investigators and other users. This paper also presents some microgravity acceleration characterization results from the last six years of Orbiter microgravity missions.

DeLombard, Richard↗

Integrating PGAS and MPI-based Graph Analysis

This project demonstrates that Chapel programs can interface with MPI-based libraries written in C++ without storing multiple copies of shared data. Chapel is a language for productive parallel computing using global address spaces (PGAS). We identified two approaches to interface Chapel code with the MPI-based Grafiki and Trilinos libraries. The first uses a single Chapel executable to call a C function that interacts with the C++ libraries. The second uses the mmap function to allow separate executables to read and write to the same block of memory on a node. We also encapsulated the second approach in Docker/Singularity containers to maximize ease of use. Comparisons of the two approaches using shared and distributed memory installations of Chapel show that both approaches provide similar scalability and performance.

97 MATHEMATICS AND COMPUTING↗

Shuttle/spacelab MMAP/electromagnetic environment experiment phase B definition study

Progress made during the first five months of the Phase B definition study for the MMAP/Electromagnetic Environment Experiment (EEE) was described. An antenna/receiver assembly has been defined and sized for stowing in a three pallet bay area in the shuttle. Six scanning modes for the assembly are analyzed and footprints for various antenna sizes are plotted. Mission profiles have been outlined for a 400 km height, 57 deg inclination angle, circular orbit. Viewing time over 7 geographical areas are listed. Shuttle interfaces have been studied to determine what configuration the antenna assembly must have to be shared with other experiments of the Microwave Multi-Applications Payload (MMAP) and to be stowed in the shuttle bay. Other results reported include a frequency plan, a proposed antenna subsystem design, a proposed receiver design, preliminary outlines of the experiment controls and an analysis of on-board and ground data processing schemes.

Horton, J. B.↗

Microgravity Environment Description Handbook

The Microgravity Measurement and Analysis Project (MMAP) at the NASA Lewis Research Center (LeRC) manages the Space Acceleration Measurement System (SAMS) and the Orbital Acceleration Research Experiment (OARE) instruments to measure the microgravity environment on orbiting space laboratories. These laboratories include the Spacelab payloads on the shuttle, the SPACEHAB module on the shuttle, the middeck area of the shuttle, and Russia's Mir space station. Experiments are performed in these laboratories to investigate scientific principles in the near-absence of gravity. The microgravity environment desired for most experiments would have zero acceleration across all frequency bands or a true weightless condition. This is not possible due to the nature of spaceflight where there are numerous factors which introduce accelerations to the environment. This handbook presents an overview of the major microgravity environment disturbances of these laboratories. These disturbances are characterized by their source (where known), their magnitude, frequency and duration, and their effect on the microgravity environment. Each disturbance is characterized on a single page for ease in understanding the effect of a particular disturbance. The handbook also contains a brief description of each laboratory.

DeLombard, Richard↗

Summary Status of the Space Acceleration Measurement System (SAMS), September 1993

The Space Acceleration Measurement System (SAMS) was developed to measure the microgravity acceleration environment to which NASA science payloads are exposed during microgravity science missions on the shuttle. Six flight units have been fabricated to date. The inaugural flight of a SAMS unit was on STS-40 in June 1991 as part of the First Spacelab Life Sciences mission. Since that time, SAMS has flown on six additional missions and gathered eighteen gigabytes of data representing sixty-eight days of microgravity environment. The SAMS units have been flown in the shuttle middeck and cargo bay, in the Spacelab module, and in the Spacehab module. This paper summarizes the missions and experiments which SAMS has supported. The quantity of data and the utilization of the SAMS data is described. Future activities are briefly described for the SAMS project and the Microgravity Measurement and Analysis project (MMAP) to support science experiments and scientists with microgravity environment measurement and analysis.

DeLombard, Richard↗

Measured Success: The Microgravity Measurement and Analysis Project

In microgravity, even minute forces can affect experiments: therefore, investigators need to know the precise strength of the gravitational levels and vibrations affecting their experiments to interpret results correctly and to develop an understanding of the effects caused by these forces. The Microgravity Measurement and Analysis Project (MMAP) at the NASA Lewis Research Center was established to provide a single source for measuring the microgravity environment on various orbiting spacecraft, providing support for scientists, and microgravity environment data. As part of this project, the Space Acceleration Measurement System (SAMS) and the Orbital Acceleration Research Experiment (OARE) have supported 15 shuttle missions. In addition, one SAMS unit has been operated on Russia's Mir Space Station since September 1994.

DeLombard, Richard↗

Summary Status of the Space Acceleration Measurement System (SAMS), September 1993

The Space Acceleration Measurement System (SAMS) was developed to measure the microgravity acceleration environment to which NASA science payloads are exposed during microgravity science missions on the shuttle. Six flight units have been fabricated to date. The inaugural flight of a SAMS unit was on STS-40 in June 1991 as part of the flrst Spacelab Life Sciences mission. Since that time, SAMS has flown on six additional missions and gathered 18 gigabytes of data representing 68 days of microgravity environment. The SAMS units have been flown in the shuttle middeck and cargo bay, in the Spacelab module, and in the Spacehab module. This paper summarizes the missions and experiments which SAMS has supported. The quantity of data and the utilization of the SAMS data is described. Future activities are briefly described for the SAMS project and.the Microgravity Measurement and Analysis Project (MMAP) to support science experiments and scientists with microgravity environment measurement and analysis.

DeLombard, Richard↗

Enabling Scalable and Extensible Memory-mapped Datastores in Userspace

Exascale workloads are expected to incorporate data-intensive processing in close coordination with traditional physics simulations. These emerging scientific, data-analytics and machine learning applications need to access a wide variety of datastores in flat files and structured databases. Programmer productivity is greatly enhanced by mapping datastores into the application process's virtual memory space to provide a unified “in-memory” interface. Currently, memory mapping is provided by system software primarily designed for generality and reliability. However, scalability at high concurrency is a formidable challenge on exascale systems. Also, there is a need for extensibility to support new datastores potentially requiring HPC data transfer services. In this article, we present UMap , a scalable and extensible userspace service for memory-mapping datastores. Furthermore, through decoupled queue management, concurrency aware adaptation, and dynamic load balancing, UMap enables application performance to scale even at high concurrency. We evaluate UMap in data-intensive applications, including sorting, graph traversal, database operations, and metagenomic analytics. Our results show that UMap as a userspace service outperforms an optimized kernel-based service across a wide range of intra-node concurrency by 1.22-1.9 × . We performed two case studies to demonstrate UMap 's extensibility. First, a new datastore residing in remote memory is incorporated into UMap as an application-specific plugin. Second, we present a persistent memory allocator Metall built atop UMap for unified storage/memory.

97 MATHEMATICS AND COMPUTING↗

Computing Sparse Tensor Decompositions via Chapel and C++/MPI Interoperability without Intermediate I/O

We extend an existing approach for efficient use of shared mapped memory across Chapel and C++ for graph data stored as 1-D arrays to sparse tensor data stored using a combination of 2-D and 1-D arrays. We describe the specific extensions that provide use of shared mapped memory tensor data for a particular C++ tensor decomposition tool called GentenMPI. We then demonstrate our approach on several real-world datasets, providing timing results that illustrate minimal overhead incurred using this approach. Finally, we extend our work to improve memory usage and provide convenient random access to sparse shared mapped memory tensor elements in Chapel, while still being capable of leveraging high performance implementations of tensor algorithms in C++.

97 MATHEMATICS AND COMPUTING↗