Search NASA⌕ Search

SEARCH · Search NASA

Results for “mobile applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enabling fast discharge of Li-ion batteries via electrolyte formulations for urban air mobility applications

High-power discharge requirements are critical for lithium-ion batteries (LIBs) used in electric Vertical Takeoff and Landing (eVTOL) vehicles that are increasingly considered in urban mobility. This investigation places a particular emphasis on understanding the impact of electrolytes on discharge processes and rate capability. We aim to compare the discharge behavior of LiBs using a conventional electrolyte (Gen 2: 1.2 M LiPF 6 in EC:EMC) and the dual salt LiTFSI-LiBOB-based electrolyte. Here we carefully examine the profiles of charging and discharging, the behavior during extended cycles, impedance spectroscopy results, and the characteristics of the electrode surface. Our research findings demonstrate the complex relationship between the composition of electrolytes and the specific high-power discharge requirements of electric vertical takeoff and landing (eVTOL) systems. This research highlights the importance of customizing electrolyte compositions to optimize energy storage density while simultaneously enabling higher power extraction to enhance performance in short-range electric aviation.

25 ENERGY STORAGE↗
DOE OSTI2020

A Conceptual Design for a Mobile Application to Support Infield Inventory Activities

This paper introduces an inventory assistant being developed at Oak Ridge National Laboratory (ORNL) that we believe will empower users to perform inventory activities at nuclear facilities more accurately, reliably, and quickly. Inventory activities at nuclear facilities are often conducted using pen and paper, which can be time-consuming, tedious, and susceptible to reading or transcription errors. The proposed inventory assistant would replace the paper-based process used by International Atomic Energy Agency (IAEA) inspectors, nuclear facility operators, or verification monitors to complete an inventory of nuclear and non-nuclear items. In general, the inventory assistant would ingest an inventory list, distribute assigned items from the inventory list to one or more mobile devices, enable inventory teams to record their observations in the field, and then enable an inventory lead to integrate and reconcile the observations to produce a final report. The assistant consists of two software components—one for the inventory teams to record observations in the field (In-Field Observations App [IFOA]) and one for the inventory lead to reconcile the inventory list with observations (Distribution, Integration, and Reconciliation Application [DIRA]). This paper introduces the overall workflow of the inventory assistant and describes the IFOA user experience in more detail. To demonstrate the concept, the authors present a use case of IAEA inspectors conducting item counting and tag checking activities of UF6 cylinders at a gas centrifuge enrichment plant with a large number of UF6 cylinders (e.g., thousands). These activities can currently require 30–40 person-days of inspection to complete. Based on experiences during an exercised performed at the IAEA by the ORNL team in 2016, we believe an inventory assistant could allow the IAEA to complete item counting and tag checking using the global identifier or the operator’s barcode in 8–10 person-days of inspection. We would expect other users (e.g., facility operators or verification monitors) to also benefit from significant time savings.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Investigating Gadolinium-Lined Sodium-Iodide Neutron Detectors for Mobile Applications

For enhancing the effectiveness of nonproliferation efforts in neutron detection, most portable instruments rely on 6 Li scintillators, 10 B-based detectors, or gas-filled 3 He proportional counters. Additionally, gamma-ray detectors based on scintillators and semiconductors are often employed for search applications to find radioactive material in the field. These systems typically include dedicated detectors along with separate high voltage supplies and processing electronics for the gamma-ray and neutron detectors. Ideally, a portable radiation detection system should be lightweight, compact, and cost-effective. In the field, scintillators can serve a dual purpose: (1) detecting gamma-rays and (2) detecting neutrons. Gamma-ray detection with scintillators is based on the interaction of gamma-rays within the scintillating material, whereas neutron detection depends indirectly on neutron capture events. These capture events generate conversion electrons and gamma-rays, which can interact with the scintillator. For enhancing neutron capture, the scintillator can be surrounded by neutron absorber materials with a high neutron cross section. The resulting secondary electrons and gamma-rays from neutron interactions, depending on the absorber material used, can then be analyzed to detect the presence of neutron sources. Similarly, semiconductor-based detectors can be employed along with neutron absorbers as liners for neutron detection. 158 Gd has a significantly larger neutron cross section than 3 He, commonly used in gas-filled proportional counters, as shown in Figure 1. For thermal (0.025 eV) neutrons, the absorption cross section of 158 Gd is 10,000 times greater than that of 3 He (refer to Figure 1). This feature makes naturally occurring gadolinium, which consists of 24.8% 158 Gd, a promising neutron absorber material for use in combination with gamma-ray detectors–yielding a hybrid detector–for neutron detection.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2022

System, method, and apparatus for integrating high power density power electronics on a mobile application

A motor drive converter includes a cold plate having a first side and a second side, the first side being opposite to the second side. The motor drive converter may further include at least one motor phase power electronics disposed on the first side of the cold plate, and a capacitor array disposed on the second side of the cold plate. The cold plate may include slots therethrough for a conductor to pass through the cold plate. The conductor may be configured to electrically coupling the capacitor array and the at least one motor phase power electronics.

Stoltz, Thomas Joseph↗
DOE OSTI2025

A Life Cycle Analysis Framework for Point Source Capture Systems

NETL studies the costs and benefits of PSC for electricity, industry, and mobile applications. Mobile point source capture (MPSC) and storage applied to freight modes captures emissions directly from exhaust. This poster presents a framework for conducting LCA of PSC systems applied to heavy-duty trucks, freight trains, and marine vessels. The framework defines a wheels-to-storage (gate-to-grave) boundary, including energy demands (electricity, heat, and cooling requirements), solvent use and cycling, onboard system components, carbon storage in a saline aquifer, and upstream manufacturing impacts for equipment, with a suggested functional unit of 1 tonne-km. Potential data sources for analysis include material, energy, and operational data from Oak Ridge National Laboratory, GREET (Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model, and scientific literature. The suggested analytical approach includes comparison to publicly available business-as-usual systems without capture across all modes of transportation, sensitivity to composition of the capture solvent, and sensitivity to capture rate variation, all of which would support a wholistic PSC business case analysis. For future consideration, analysis can be augmented with consideration of different sources of electricity (e.g., nuclear), fuel substitution, deploying supportive infrastructure such as pipeline offloading points, and downstream applications like enhanced oil recovery (EOR).

life cycle analysis (LCA)↗
DOE OSTI2022

General Overview of Mobile Sources Used for Well Logging and Industrial Radiography Applications

Mobile sources is a term most commonly used to describe radioactive sources that are used in applications requiring frequent transportation. Such radioactive sources are in common use world-wide where typical applications include radiographic non-destructive evaluation (NDE) and oil and gas well logging, among others requiring lesser amounts of radioactivity. This report provides a general overview of mobile sources used for well logging and industrial radiography applications including radionuclides used, equipment, and alternative technologies. Information presented here has been extracted from a larger study on common mobile radiation sources and their use.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Investigate the Security of Electric Vehicle (EV) Ecosystem Applications

Apps that run on mobile devices are one of critical components of the electric vehicle (EV) ecosystem and pose possible threat actor points of entry that may impact the trust and security of EV charging systems in the future. Mobile apps often rely on communication between cloud servers and users, thereby creating potential points of entry for cyberattacks. Although app stores such as Apple App Store or Google Play Store generally test the security of apps, the cyber aspects may not be sufficient for many entities including DOD, federal fleets, and commercial entities. A more thorough inspection and the ability to influence developers is imminently needed. This research studies security attributes and vulnerabilities of a sample of mobile applications that support key user functions in the EV ecosystem. The study shows that all analyzed apps have security risks, categorized as either high or medium or both and a comprehensive cybersecurity guideline for developing mobile apps is necessary.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Operational control with set-points tuning - application to mobile robots

This paper proposes a novel method for the optimal tuning of set points for multiple-layered control system structure widely seen in robotics and other complex industrial processes composed of a number of subsystems. The terminal sliding mode control (SMC) is used as the low-level control strategy to ensure the stability of subsystems. When uncertainties exist, it can be shown that the deteriorated system performance will be improved by the outer loop with set points tuning. For this purpose, the learning of the new set point is designed to compensate for the effects caused by uncertainties during the system operation. At the same time, the system is proven to stay with the original set point when the compensation is introduced. A practical application to a holonomic mobile robot system is given to illustrate the presented method. Desired results have been obtained.

42 ENGINEERING↗
DOE OSTI2024

SmartTransit.AI: A Dynamic Paratransit and Microtransit Application

New rideshare and shared mobility services have transformed urban mobility in recent years. Such services have the potential to improve efficiency and reduce costs by allowing users to share rides in high-capacity vehicles and vans. Most transit agencies already operate various ridepooling services, including microtransit and paratransit. However, the objectives and constraints for implementing these services vary greatly between agencies and can be challenging. First, off-the-shelf ridepooling formulations must be adapted for real-world conditions and constraints. Second, the lack of modular and reusable software makes it hard to implement and evaluate new ridepooling algorithms and approaches in real-world settings. We demonstrate a modular on-demand public transportation scheduling software for microtransit and paratransit services. The software is aimed at transit agencies looking to incorporate state-of-the-art rideshare and ridepooling algorithms in their everyday operations. We provide management software for dispatchers and mobile applications for drivers and users and conclude with results from the demonstration in Chattanooga, TN.

Pavia, Sophie↗
DOE OSTI2020

A High-Efficient Solution for Electro-Hydraulic Actuators with Energy Regeneration Capability

This paper proposes a cost-effective, robustly practical solution for a high-efficient electro-hydraulic actuator (EHA) for linear drives. The solution addresses the challenges of high costs and limited efficiency that limit the application of EHA for the electrification of many off-road vehicles. Based on a variable-speed electric motor and a low-cost technology for a fixed-displacement pump, the proposed solution is suitable for a compact implementation and it is capable of energy regeneration under overrunning load conditions. Two different architectures—an open circuit and a closed circuit one—are considered to determine the most practical and efficient configuration as well as the control features. Both architectures minimize throttling losses associated with the conventional regulation of hydraulic actuators. Actuator velocities below the minimum and beyond the maximum allowable pump flow rate are achieved in both architectures using a proportional valve that bypasses the pump flow. The paper describes the design methodology as well as the simulation and experimental activities performed to verify the control strategies as well as energy efficiency. Considering an EHA system of about 20 kW, a complete efficiency map of the system is determined for all the possible four quadrants of operation thus including both resistive and overrunning loads, where energy recuperation is implemented. Simulation and experimental results show that the energy efficiency of the hydraulic systems can reach 84.7% in resistive phases. In assistive phases, the hydraulic system can recover up to 81.8% of the actuator energy. Here, the comparison between open-circuit and closed-circuit structures shows the advantages of the former in terms of energy efficiency. The proposed solution is suitable for electrified hydraulic actuation systems, in both industrial and mobile applications. With the advantages of the low cost of the hydraulic unit and high energy efficiency, it is particularly suitable for mobile applications such as construction machines, that are recently experiencing a significant electrification trend.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Multi-Pressure Rail System Design with Variable Pressure Control Strategy

This paper presents the design and the control method of a Multiple Pressure Rail system (MPR) with a variable pressure control logic that allows minimization of throttling loss, therefore, increasing the overall fluid power actuation efficiency. An MPR system allows controlling hydraulic actuators with a pressure control logic, as opposed to traditional flow control logics which are well established in mobile applications. A proper setting of the number of pressure rails and the pressure level in each rail permits optimizing the system efficiency of an MPR solution. MPR systems have been recently proposed with different purposes, but seldom adopt variable pressure control strategies to manage the pressure variations in the rails. Moreover, the related past work attempts to maximize the energy recovery during overrunning load conditions. This paper, instead, addresses the case of an MPR system that handles a multitude of hydraulic functions without significant overrunning loads, as it occurs in many mobile applications such as in agriculture. The paper first presents the design alternatives considered for the MPR system, including the supply, the control valves, and the controller. Second, a dedicated test rig is developed to support experimental activities and validations of a lumped parameter model developed within this research to develop the MPR control strategy. The results describe the operating features of the proposed MPR solution. By considering the case of a traditional LS system, the paper results also show how system efficiency can be highly improved, with energy savings in the order of 49%

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Flexible Perovskite-Perovskite PV for Mobile Power Applications (Final Technical Report)

This is the final report for the referenced TCF award which ran from Oct. 2019 through Jan. 2024 in conjunction with the industry partner Swift Solar. The long duration of the program was due to several factors including the pandemic and a technical work stoppage due to changes in the scope. Additionally, Swift’s business focus shifted during the course of the program. As a result of these factors, this program underwent two distinct modifications that dramatically changed the work scope. The following report is organized into three separate sections, each of which addresses a distinct work scope. Those scope changes, what necessitated them, and any new tasks/milestones are given, briefly, at the top of each section. The work performed was research on the hybrid halide perovskites (HHP), both the absorber material itself as well as other material layers that are required in a full device stack. At the start of the period of performance, there were two distinct challenges that we sought to address: (1) a wide band gap absorber (>1.6 eV), and (2) a recombination layer for tandem devices that provided good sequestration of the individual cell absorber materials in their respective device layers. NREL had previously published, and patented, advancements in both of these areas and they were the focus of much of the work throughout the program.

14 SOLAR ENERGY↗
DOE OSTI2021

Application of Mobile Energy Storage for Enhancing Power Grid Resilience: A Review

Natural disasters can lead to large-scale power outages, affecting critical infrastructure and causing social and economic damages. These events are exacerbated by climate change, which increases their frequency and magnitude. Improving power grid resilience can help mitigate the damages caused by these events. Mobile energy storage systems, classified as truck-mounted or towable battery storage systems, have recently been considered to enhance distribution grid resilience by providing localized support to critical loads during an outage. Compared to stationary batteries and other energy storage systems, their mobility provides operational flexibility to support geographically dispersed loads across an outage area. This paper provides a comprehensive and critical review of academic literature on mobile energy storage for power system resilience enhancement. As mobile energy storage is often coupled with mobile emergency generators or electric buses, those technologies are also considered in the review. Allocation of these resources for power grid resilience enhancement requires modeling of both the transportation system constraints and the power grid operational constraints. These aspects are discussed, along with a discussion on the cost–benefit analysis of mobile energy resources. The paper concludes by presenting research gaps, associated challenges, and potential future directions to address these challenges.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

CyTRICS™ Assessment Report: Whole Home Battery Applications

This report examines the software supply chain security posture of mobile applications developed for consumer whole-house battery and energy-management products. While these applications are not currently integrated with critical infrastructure, their growing role in connected energy domain spaces underscores the importance of understanding the external dependencies, permission structures, and runtime behaviors that could introduce systemic risk; particularly, if adoption expands into more critical environments.

25 ENERGY STORAGE↗
DOE OSTI2025

Differentially Private Map Matching (DPMM) v1.0

Human mobility trajectories provide valuable information for developing mobility applications, as they contain diverse and rich information about the users. User mobility data is valuable for various applications such as intelligent transportation systems (ITS), commercial business models, and disease-spread models. However, such spatio-temporal traces may pose a threat to user privacy. GPS trajectories in their raw form are not suitable for transportation studies, as they require matching locations with nearest road links — a process called map-matching. This software implements a differential privacy (DP)-based map-matching algorithm, called DPMM, that generates link-level location trajectories in a privacy-preserving manner to protect users' origin destinations (OD) and travel paths. OD privacy is achieved by injecting Planar Laplace noise to the user OD GPS points. Travel-path privacy is provided with randomized travel path construction using exponential DP mechanism. The injected noise level is selected adaptively, by considering the link density of the location and the functional category of the localized links. For path privacy, our mechanism samples waypoints and selects candidate paths between waypoints. DPMM provides privacy effectively with respect to link density instead of other trajectory samples in the database compared to other privacy mechanisms. Compared to the different baseline models our DP-based privacy model offers closer query responses to the raw data in terms of individual and aggregate trajectory-level statistics with an average at absolute deviation from the baseline for individual statistics on ϵ = 1.0. Beyond individual trajectory statistics, the DPMM outperforms the other benchmark DP-based mechanisms on different aggregate statistics with up to 8x improvement in utility.

Peisert, Sean [Lawrence Berkeley National Laborato↗
DOE OSTI2023

Jay : A software framework for prototyping and evaluating offloading applications in hybrid edge clouds

Abstract We present Jay , a software framework for offloading applications in hybrid edge clouds. Jay provides an API, services, and tools that enable mobile application developers to implement, instrument, and evaluate offloading applications using configurable cloud topologies, offloading strategies, and job types. We start by presenting Jay 's job model and the concrete architecture of the framework. We then present the programming API with several examples of customization. Then, we turn to the description of the internal implementation of Jay instances and their components. Finally, we describe the Jay Workbench, a tool that allows the setup, execution, and reproduction of experiments with networks of hosts with different resource capabilities organized with specific topologies. The complete source code for the framework and workbench is provided in a GitHub repository.

Silva, Joaquim↗