Search NASA⌕ Search

SEARCH · Search NASA

Results for “mobile species”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Low Current and Analog Memristor with Ru as Mobile Species

The switching parameters and device performance of memristors are predominately determined by their mobile species and matrix materials. Devices with oxygen or oxygen vacancies as the mobile species usually exhibit a great retention but also need a relatively high switching current (e.g., >30 mu A), while devices with Ag or Cu as cation mobile species do not require a high switching current but usually show a poor retention. Here, Ru is studied as a new type of mobile species for memristors to achieve low switching current, fast speed, good reliability, scalability, and analog switching property simultaneously. An electrochemical metallization-like memristor with a stack of Pt/Ta2O5/Ru is developed. Migration of Ru ions is revealed by energy-dispersive X-ray spectroscopy mapping and in situ transmission electron microscopy within a sub-10 nm active device area before and after switching. The results open up a new avenue to engineer memristors for desired properties.

analog switching↗
DOE OSTI2024

Selective Detection of Intermediate-Amplitude Motion by Solid-State NMR

The coexistence of rigid and mobile molecules or molecular segments abounds in biomolecular assemblies. Examples include the carbohydrate-rich cell walls of plants and intrinsically disordered proteins that contain rigid β-sheet cores. In solid-state nuclear magnetic resonance (NMR) spectroscopy, dipolar polarization transfer experiments are well suited for detecting rigid components, whereas scalar-coupling experiments are well suited for detecting highly mobile components. However, few NMR methods are available to detect the segments that undergo intermediate-amplitude fast motion. Here, we introduce two NMR experiments, a two-dimensional T 2H -filtered CP-hCH correlation and a three-dimensional J-INADEQUATE CCH correlation, to observe this intermediate-amplitude motion. Both experiments involve 1 H detection under fast magic-angle spinning (MAS). By combining 1 H transverse relaxation (T 2H ) filters with dipolar polarization transfer, we suppress the signals of both highly rigid and highly mobile species, thus revealing the signals of intermediate mobile species. 1 H detection under fast MAS is crucial for distinguishing the different motional amplitudes. Here, we demonstrate these techniques on several plant cell wall samples and show that they allow the selective detection and resolution of certain hemicellulose and pectin signals, which are usually masked by the signals of the rigid cellulose and the highly dynamic pectins in purely dipolar and scalar NMR spectra.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Hierarchical morphologies in co-sputter deposited thin films

Co-depositions of immiscible alloy films at specific processing conditions have yielded hierarchical microstructures which consist of distinct features at multiple length scales, often agglomerates and concentration modulations on the sub-micrometer-scale and fine nanoprecipitates in a matrix on the nanoscale. The present work examined a series of immiscible alloy systems: Cu-Mo, Cu-Ag, Cu-Fe, Cu-Ta, Mo-Ag, Cu-Mo-Ag, to determine the kinetic conditions favorable for hierarchical organization and the formation mechanism of such structures. Thin films of six immiscible systems were sputter co-deposited over a range of deposition rates from 0.12 to 2 nm/s and various temperatures from 400 to 800°C. The resulting microstructures indicate that hierarchical structures form with sufficient disparity in kinetic energy between the constituent atoms, one species being highly mobile (A) and the other relatively immobile (B). This condition arises typically at elevated deposition temperatures and reduced deposition rates but is also alloy dependent. The hierarchical structures form during deposition via phase separation and self-organization processes across the multiple length scales. The adatoms diffuse on the film surface with the highly mobile species swiftly agglomerating into A-rich domains within which B-rich nanoprecipitates form, often self-organizing into periodic arrays. The smallest B-rich nanoprecipitates in the A-rich domains are found to be coherent and in a metastable crystal structure (B taking the structure of A), but coarser precipitates that exhibit the equilibrium structure of B element. The A-rich domains are surrounded by a B-rich matrix that phase-separates into a concentration modulated structure. In conclusion, the observations are interpreted via a model incorporating material properties and process parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Unique Features of Polarization in Ferroelectric Ionic Conductors

Abstract Ferroelectrics that are also ionic conductors offer possibilities for novel applications with high tunability, especially if the same atomic species causes both phenomena. In particular, at temperatures just below the Curie temperature, polarized states may be sustainable as the mobile species is driven in a controlled way over the energy barrier that governs ionic conduction, resulting in unique control of the polarization. This possibility is recently demonstrated in CuInP 2 S 6 , a layered ferroelectric ionic conductor in which Cu ions cause both ferroelectricity and ionic conduction. Here, it is shown that the commonly used approach to calculate the polarization of evolving atomic configurations in ferroelectrics using the modern theory of polarization, namely concerted (synchronous) migration of the displacing ions, is not well suited to describe the polarization evolution as the Cu ions cross the van der Waals gaps. An asynchronous Cu‐migration scheme is introduced, which reflects the physical process by which Cu ions migrate, resolves the difficulties, and describes the polarization evolution both for normal ferroelectric switching and for transitions across the van der Waals gaps, providing a single framework to discuss ferroelectric ionic conductors.

O'Hara, Andrew↗
DOE OSTI2025

Water Temperature, Prey Concentration and Salmonid Density Influence Daily Growth of Wild Juvenile Salmonids in Tributaries of the Upper Salmon River, Idaho ( USA )

ABSTRACT Theory, experiments and field studies indicate that the somatic growth rate of freshwater consumers is shaped by the individual, additive and multiplicative effects of multiple factors, including consumer size and condition, temperature, prey resources and biotic interactions. While our understanding of how these factors affect wild populations of freshwater consumers is improving, the topic remains poorly studied, especially with respect to mobile species. Here, we report on an 8‐year, seven‐stream ( n = 49 stream‐year combinations) observational study examining the individual and interactive effects of invertebrate prey concentration (F, mg/m 3 ), mean daily water temperature (T, °C) and juvenile Chinook salmon ( Oncorhynchus tshawytscha ) density (D, fish/100 m 2 ) on summer daily growth rates (%/d) of mobile, anadromous, juvenile Chinook salmon (age‐0+, n = 382) and sub‐yearling (age‐0+, n = 61) and yearling (age‐1+) steelhead trout ( O. mykiss , n = 70) rearing in cold (mean daily summer: 12.1°C, range: 4.2°C–16.7°C) mountain tributaries of the Salmon River basin in central Idaho (USA). AIC c model selection indicated that daily juvenile salmonid growth positively correlated with water temperature, prey biomass concentration, local juvenile Chinook density and the interaction between water temperature and food but with species and age‐specific differences. Water temperature was a covariate in all top‐ranked models, with daily growth (%/day) rate increasing (0.05%–0.23%/d) linearly with mean daily summer water temperature. In addition to a direct positive relationship with daily growth rate, there was evidence that prey concentration positively interacted with water temperature to accelerate daily growth (F × T). The positive relationship between juvenile salmonid daily growth rate and juvenile Chinook density is difficult to explain and could result from confounding factors. The individual success observed in these streams may contribute to population‐level benefits for the focal consumers, as prey‐rich, warm summers may result in larger individuals with higher energy reserves at the end of the summer/autumn growing season, contributing to improved overwinter survival. Our results, taken in combination with evidence from models, experiments and observational studies, have climate change implications. Current and predicted increases in water temperature will necessitate higher rates of prey consumption by aquatic ectothermic consumers to offset accelerated metabolic demands. Thus, to improve the resilience of mobile freshwater consumers in a warming climate, we suggest that natural resource managers not only consider physical and chemical habitat conditions but also biotic conditions, including the spatiotemporal quantity and quality of prey resources.

Kiffney, Peter. M. [Fish Ecology, Northwest Fisher↗
DOE OSTI2023

Modeling diffusion and types I-V sorption of water vapor in heterogeneous systems

Here, a sorption and diffusion model is developed using a mobile-immobile decomposition of the vapor concentration. Henry’s mode represents the mobile species which diffuses through the solid, while Langmuir and pooling modes represent possible immobilization processes that cause nonlinearities in sorption capacity. The model can simulate the five classical sorption types and can incorporate additional dynamics compared to models based on thermodynamic equilibrium. Additionally, the framework allows for discontinuities in material properties encountered in multi-material systems. The resulting non-linear coupled equations are solved by employing a finite element method to discretize in space, and a backward Euler method to discretize in time. The discretized system of equations is solved via a Newton-type iteration scheme at each time-step. Four different materials are parameterized for the model, which are then used in examples to demonstrate the model’s ability to capture complex sorption processes in multi-material systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evaluation of Gaseous Substrates for Microbial Immobilization of Contaminant Mixtures in Unsaturated Subsurface Sediments

Extensive vadose zone metals and organic contamination remains at many former industrial and defense manufacturing sites, and effective remedial solutions are needed to slow or prevent its migration to groundwater. In this study, the application of gaseous substrates to stimulate microbial respiratory reduction of comingled radioisotopes and nitrate under unsaturated conditions was examined for possible application at the Hanford Site, a former nuclear production facility in southeastern WA, USA. First, screening studies were performed to qualitatively measure the sediment respiratory response to 14 gaseous or volatile organic substrates at two moisture contents, 4% and 8%. Volatile substrates produced the strongest respiratory response, among them were butyrate, pentane, butyl acetate. Ethane and butane were the most effective gaseous substrates but only at 8% water content. Hanford sediment from two waste sites with distinctive chemistries were wetted to 7% moisture content, packed into columns, and treated with ethane or butane. After 4 weeks, columns were then leached to quantify retardation in the mobility of aqueous contaminant concentrations compared to no gas control columns. Treatment with both gases resulted in >80% removal of Cr from the aqueous phase. However, NO3 concentration and a waste sites exposure history to NO3 had a major effect on U and Tc reduction. Incomplete nitrate reduction outcompeted U and Tc in waste site sediments having limited prior exposure to NO3. Conversely, waste site sediments co-contaminated with NO3 were able to achieve highly reduced conditions resulting in complete denitrification of NO3, and delayed leaching of U and Tc. This implied effective reduction of both contaminants to less mobile species. This study demonstrates that unsaturated vadose sediments at Hanford waste sites have the capacity for a sustained respiratory response to gaseous substrate injection, which could potentially be deployed as part of an overall strategy to reduce the flux of long-lived radionuclides to groundwater at Hanford and other legacy waste sites.

Bagwell, Christopher E.↗
DOE OSTI2021

Molecular-level insights into structure and dynamics in ionic liquids and polymer gel electrolytes

We report designing new electrolytes requires a better understanding of the correlation between their transport properties and their molecular structure. In this work, we present a detailed study of ionic liquids and polymer gel electrolytes probing their structure and dynamics by nuclear magnetic resonance (NMR) spectroscopy. In particular, ammonium- and phosphonium-based ionic liquids (ILs) are combined with different LiTFSI concentrations, and then with different ratios of poly(methylmethacrylate) polymer. The temperature dependence of self-diffusion coefficients of mobile species, D Li+ , D TFSI- and D P4441+ or D N4441+ , measured by pulsed field gradient (PFG) NMR spectroscopy obeys the Arrhenius equation. Diffusivity of [P4441][TFSI] ILs is found to be greater than those of the [N4441][TFSI] ILs in both liquid and gel electrolytes. Solid state NMR experiments including 13 C and 19 F MAS, 13 C{ 19 F}, 13 C{ 1 H} CPMAS probe the local structure and molecular-level interactions between ions and polymer in gel electrolytes, particularly for samples with higher PMMA content (≥25 wt%). Finally, the fast field cycling relaxometry has been used to unveil the rotational and translational dynamics of P4441 + or N4441 + and TFSI - by measuring 1 H and 19 F R 1 relaxation rate profiles at different temperatures. A comprehensive NMR analysis including relaxation studies at low magnetic field provides decisive new insights regarding the formation of ionic clusters and the interaction of ions with the polymer chain in the case of the gel electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Direct Uranium Isotopic Analysis of Swipe Surfaces by Microextraction-ICP-MS

The ability to directly measure uranium isotope ratios on environmental swipes has been achieved through a solution-based microextraction process and represents a significant advancement toward the development of a rapid method to analyze international nuclear safeguard samples. Here, a microextraction probe is lowered and sealed onto the swipe surface, and analytes within the sampling site (~8 mm2) are dissolved and extracted into a flowing solvent of 2% nitric acid (HNO 3 ). The mobilized species are subsequently directed into an inductively coupled plasma-mass spectrometer (ICP-MS) for accurate and precise isotope ratio determination. This work highlights the novelty of the sampling mechanism, particularly with the direct coupling of the microextraction probe to the ICP-MS and measurement of uranium isotope ratios. The preliminary method detection limit for the microextraction-ICP-MS method, utilizing a quadrupole-based MS, was determined to be ~50 pg of 238 U. Additionally, precise and accurate isotope ratio measurements were achieved on uranium reference materials for both the major ( 235 U/ 238 U) and minor ( 234 U/ 238 U and 236 U/ 238 U) ratios. While the present work is focused on directly measuring uranium isotopic systems on swipe surfaces for nuclear safeguards and verification applications, the benefits would extend across many applications in which direct solid sampling is sought for elemental and isotopic analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unconventional Charge Transport in MgCr 2 O 4 and Implications for Battery Intercalation Hosts

Ion transport in solid-state cathode materials prescribes a fundamental limit to the rates batteries can operate; therefore, an accurate understanding of ion transport is a critical missing piece to enable new battery technologies, such as magnesium batteries. Based on our conventional understanding of lithium-ion materials, MgCr 2 O 4 is a promising magnesium-ion cathode material given its high capacity, high voltage against an Mg anode, and acceptable computed diffusion barriers. Electrochemical examinations of MgCr 2 O 4 , however, reveal significant energetic limitations. Motivated by these disparate observations; herein, we examine long-range ion transport by electrically polarizing dense pellets of MgCr 2 O 4 . Our conventional understanding of ion transport in battery cathode materials, e.g., Nernst-Einstein conduction, cannot explain the measured response since it neglects frictional interactions between mobile species and their nonideal free energies. In this work, we propose an extended theory that incorporates these interactions and reduces to the Nernst-Einstein conduction under dilute conditions. This theory describes the measured response, and we report the first study of long-range ion transport behavior in MgCr 2 O 4 . We conclusively show that the Mg chemical diffusivity is comparable to lithium-ion electrode materials, whereas the total conductivity is rate-limiting. Given these differences, energy storage in MgCr 2 O 4 is limited by particle-scale voltage drops, unlike lithium-ion particles that are limited by concentration gradients. Future materials design efforts should consider the interspecies interactions described in this extended theory, particularly with respect to multivalent-ion systems and their resultant effects on continuum transport properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Elephant range and population, strontium isotopes, and genetics combine to give local-scale specificity to ivory hotspot tracking

We use Sr isotopes to increase the precision of DNA-based origin estimates of wildlife products. Population information is used to develop Sr isotope Elephant Polygons that are overlaid onto the region of origin identified by DNA assignment to determine the sources of seized ivory samples. Our approach is cognizant of isotope mixing due to isotope turnover within animals and also of the large home range of elephants or other mobile species. Genetic information from 3 different law enforcement ivory seizures suggests a region of origin confined to Kenya and Tanzania in eastern Africa. We determine characteristic 87 Sr/ 86 Sr ratios for each of 25 different Elephant Polygons within this region using analyses of more the 600 known-origin reference samples. Using both the 87 Sr/ 86 Sr ratios of the seized ivory samples and elephant population estimates from individual Elephant Polygons we find that at least 75 % of the samples likely came from a single Elephant Polygon which includes the Tsavo National Parks in Kenya and the Mkomazi National Park in Tanzania. A few samples may have come from other regions, most likely from Tanzania. This study illustrates the value of combining genetics, isotope geochemistry, and population surveys in wildlife forensics studies.

Africa↗
DOE OSTI2024

Sheath constraints on turbulent magnetised plasmas

Abstract A solid target in contact with a plasma charges (negatively) to reflect the more mobile species (electrons) and thus keep the bulk plasma quasineutral. To shield the bulk plasma from the charged target, there is an oppositely (positively) charged sheath with a sharp electrostatic potential variation on the Debye length scale λ D . In magnetised plasmas where the magnetic field is inclined at an oblique angle α with the target, some of the sheath potential variation occurs also on the ion sound gyroradius length scale ρ S cos ⁡ α , caused by finite ion gyro-orbit distortion and losses. We consider a collisionless and steady-state magnetised plasma sheath whose thickness l ms ∼ max ( λ D , ρ S cos ⁡ α ) is smaller than the characteristic length scale L of spatial fluctuations in the bulk plasma, such that the limit l ms / L → 0 is appropriate. Spatial structures are assumed to be magnetic field-aligned. In the case of small magnetic field angle α ∼ δ ≡ ρ S / L ≪ 1 , electric fields tangential to the target transport ions towards the target via E × B drifts at a rate comparable to the one from parallel streaming. A generalised form of the kinetic Bohm–Chodura criterion at the sheath entrance is derived by requiring that the sheath electric field have a monotonic spatial decay far from the target. The criterion depends on tangential gradients of potential and ion distribution function, with additional nontrivial conditions.

kinetic Bohm–Chodura condition↗
DOE OSTI2021

Impacts of vacancy-induced polarization and distortion on diffusion in Solid Electrolyte Li 3 OCl

We report that Lithium-rich oxychloride antiperovskites are promising solid electrolytes for enabling next-generation batteries. Here, we report a comprehensive study varying Li + concentrations in Li 3 OCl using ab initio molecular dynamics simulations. The simulations accurately capture the complex interactions between Li + vacancies (V$^'_{Li}$), the dominant mobile species in Li 3 OCl. The V$^'_{Li}$ polarize and distort the host lattice, inducing additional non-vacancy-mediated diffusion mechanisms and correlated diffusion events that reduce the activation energy barrier at concentrations as low as 1.5% V$^'_{Li}$. Our analyses of discretized diffusion events in both space and time illustrate the critical interplay between correlated dynamics, polarization and local distortion in promoting ionic conductivity in Li 3 OCl.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrochemical Residence Time Distribution as a Diagnostic Tool for Redox Flow Batteries

The fluid dynamic and electrochemical performance of redox flow batteries (RFBs) stems from the relationship between the flow field and the porous electrode, whose interplay determines how active species move and react during device operation. While characterization techniques, such as residence time distribution, offer insights into species mobility within a reactive volume for a traditional chemical reactor, electrochemical reactors also enable simultaneous measurement of the redox reactions, unlocking another dimension of analysis. Herein, we demonstrate how potentiodynamic measurements, using injections of electrolyte examined through moment analysis, can provide electrode-specific performance scaling relationships across a matrix of carbon paper and cloth electrodes with flow through and interdigitated flow fields. We further combine experimental campaigns with multiphysics simulations to demonstrate how electrode surface area can be estimated with this technique, which we then validate with activated and unactivated commercial carbon cloth electrodes. These studies reveal the multiscale observations that potentiodynamic measurements afford, augmenting existing electrochemical techniques for holistic electrochemical reactor diagnostics.

Electrochemistry↗
DOE OSTI2020

Machine Learning in Environmental Chemistry: Application to Surface Complexation Modeling

Environmental chemistry – or biogeochemistry – is the scientific discipline typically invoked when examining and quantifying groundwater or surface water contamination, and nutrient cycling in the environment. Over the last three decades, there have been significant advances in mechanistic model development to describe and predict these complex biogeochemical processes. In particular, surface complexation models (SCMs) have been developed to describe the rock/soil surface reactions of metals and radionuclides, and their partitioning between various mobile species in the aqueous phase or immobile species sorbed on solid surfaces. Often represented by a simplified linear isotherm constant – Kd – in reactive transport models, these reactions play a critical role in many environmental science applications; particularly in contamination risk assessments and nuclear waste disposal performance assessments. In the past several decades, efforts by various institutions across the world have focused on developing SCMs based on datasets from laboratory measurements, including the identification of key parameters such as equilibrium constants.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Hole Trapping in Halide Perovskites Induces Phase Segregation

Metal halide perovskites have garnered a great deal of attention for their applications in photovoltaics, LEDs, and radiation detection. The ease of solution processing high-quality perovskite semiconductors with large absorption coefficients and tolerance to native defects is decidedly attractive. Additionally, the ability to precisely tune the band gap of halide perovskites through compositional alloying of the halide ion is of particular interest for a range of applications, especially for tandem solar cells. However, under steady state light irradiation, an initially homogeneous mixed halide perovskite (MHP) will form local domains that are rich in one halide ion (e.g., Br or I). This light-induced phase segregation in MHPs forms iodide-rich domains that act as charge carrier traps and lowers the efficiency of perovskite-based devices. Thus, phase segregation poses a serious challenge to the implementation of MHPs in real-world device settings. Interestingly, when a phase segregated MHP film is placed in the dark, entropic driving forces become dominant and the segregated perovskite remixes and returns to its initially homogeneous state. Several key mechanistic details of phase segregation have been elucidated over the years. However, there are still aspects of halide segregation that are not clear, and there is ongoing debate in the literature as to what are the key factors that contribute to the mechanism. This Account discusses recent results that point to the specific role of hole trapping in phase segregation. Interestingly, generation of holes through above-band-gap excitation or through electrochemical injection increases ion migration and leads to phase segregation. The thermodynamic and redox properties of halide perovskites provide a strong driving force for hole trapping and oxidation of iodide species in MHPs. However, mobile halide species within the perovskite lattice take time to migrate and generate halide-rich domains. When in contact with a nonpolar solvent, the migration of iodine species is further extended to expulsion of iodine from the perovskite film. Thus, the mobility of halides and their susceptibility to hole-induced oxidation play a crucial role in determining the long-term stability of metal halide perovskites. Strategies to gain kinetic control over ion migration to slow phase segregation are needed to overcome these hurdles and achieve stable mixed halide perovskites. Modification of the perovskite composition through introduction of different cations or halide ions, or introduction of low-dimensional perovskite phases may suppress phase segregation. Furthermore, in achieving stability and improving the efficiency of perovskite solar cells and light emitting devices with minimal impacts, suppression of segregation remains the key factor.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Biphasic Janus Particles Explain Self-Healing in Pt–Pd Diesel Oxidation Catalysts

The addition of Pd to Pt-based diesel oxidation catalysts is known to enhance performance and restrict the anomalous growth of Pt nanoparticles when subjected to aging at high temperatures in oxidative environments. To gain a mechanistic understanding, we studied the transport of the mobile Pt and Pd species to the vapor phase, since vapor phase transport is the primary route for sintering in these catalysts. The results are surprising: there is a 30-fold drop in the effective vapor pressure of Pt in the Pt-Pd catalysts compared to monometallic Pt. At the same time, there is a significant enhancement in the vapor pressure of Pd, compared to PdO, which otherwise has a negligible vapor pressure at the aging temperature. Such behavior cannot be explained simply by alloying Pt and Pd in the metallic phase, or a core-shell morphology where a PdO shell covers a Pt core. Transmission electron microscopic examination of catalysts aged up to 50 h in air at 800 °C shows that the particles exhibit a biphasic “Janus”-like structure. The metal and oxide phases are conjoined, exposing a metal and an oxide face to the gas phase. The high mobility of the Pt and Pd allows them to be partitioned into the metal and oxide phases, in apparent thermodynamic equilibrium. The PdO helps to trap mobile PtO2 and as a result contains high concentrations of Pt oxide, consistent with its role in mitigating the transport of Pt to the vapor phase and preventing the growth of anomalously large particles. In turn, Pt allows Pd to remain metallic, allowing the catalyst to retain both metal and oxide functionality for catalysis. The regeneration of deactivated catalysts typically requires an external input, such as a change in the working environment from reducing to oxidizing or vice-versa. Here, we show that the mobile species, which are primary contributors to catalyst sintering are effectively returned to the active site, hence our use of the term “selfhealing”. The detailed insights into the inner workings of the Pt-Pd diesel oxidation catalysts can help provide clues to the design of robust and durable heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗